Apparatus for making cotton candy: do it yourself. How to make a cotton candy machine Do-it-yourself cotton candy machine

Good afternoon, dear readers!

Today, I will describe how to make a device for cotton candy.
There is nothing complicated in the design, everything is simple. I’ll also write down the ingredients for the cotton wool itself at the end.

We will need:
- a motor (not a big motor, you can pull it out of a toy);
- the lid used to seal the jars (iron);
- medium box;
- adhesive tape, electrical tape;
- scissors;
- blank paper;
- power supply for the motor (you can take a charger from your phone and cut off the plug).

It seems like everything, during the text, if I haven’t completed all the details, it will be visible.

The manufacturing process of the device

So, let's start, first we take the motor and connect it to power. I cut off the USB cable from the phone and connected the wires to the motor. Thus, you can connect to any USB socket.

So, the motor itself needs to be attached somewhere, I have a motor of this shape and I used a can of pneumatic bullets as a mount for it, you can come up with something else!

The motor itself still needs to be fixed in the box, I decided to make a removable motor, the bullet can is divided into two parts. The photo makes the meaning clear.

We insulate the motor itself well so that when making cotton candy the motor does not get clogged, you can place it in some container or wrap it with tape.

Now we need a box. You need to take the middle box; for example, I took the first one I came across. Only the top should be open, the rest of the parts should be closed.
Here in the photo you can see the shape of the box, however, I cut the hole myself, it turned out crooked.

It is not known what was in the box. Therefore, to protect myself, it was decided to cover it with something inside, I used food paper, cakes, pies and the like are usually baked on it. If you don’t have it, you can use clean paper, oilcloth, well, whoever has enough imagination for what.
To keep the paper securely, I taped it on the sides:

Now the next stage, we need to fix the motor in the center of the box so that it holds confidently and does not move too much to the sides. You also need to remove the wire so that it does not stick out there.

Next, we will need a regular iron lid, which is used to roll up jars; the lid needs to be secured to the rotating part of the motor, at the top. You need to attach it as evenly and tightly as possible. Be sure to check that the motor turns the lid and does not spin, and that the lid rotates as smoothly as possible.

We did everything, the most important thing, hurray! All that remains is to prepare the “mixture” itself for making cotton candy.
Anyone who has prepared the so-called “cockerels” in sugar molds will already begin to guess what we will be talking about.

For those who don't understand, read:

We need:

Sugar;
- water;
- spoon;
- and some kind of capacity.

Take sugar, pour it into the container where we will cook it, add water. The result should be a homogeneous mass, not very thick and not very liquid. Don't overdo it with water!

After pouring in the sugar and water, mix a little, put on the fire and simmer, the main thing is to stir thoroughly, otherwise there will be lumps of sugar. Cook until the mixture turns brown and there will be bulbs - this is normal.

After it’s cooked, we don’t let it cool, we turn on the motor, the lid starts to spin, we start pouring the digested sugar from the container directly onto the lid and observe the appearance of cotton candy!

The main thing is not to rush, not to pour out a lot at once, but also not to hesitate, otherwise the mass of sugar will harden and nothing will work, it’s better to reheat it again. That's it, bon appetit everyone. There was no opportunity to capture the process itself, this is my second “device” for cotton candy, I didn’t do this, but I did it first more than once, it turned out no worse than the one I bought! You can add dyes and flavors, this will give the look, taste and smell of your cotton candy. Whenever possible, I will try to post photos of the process itself.

We present to you drawings of a homemade cooking apparatus cotton candy (“Feshmak”) and the technology of its preparation. You won't need much time to make it.
Feshmak is a caramel-type product, popularly called “cotton candy”, usually in the form of a bundle of elongated thin white threads.
One kilogram of sugar produces up to 80 servings of the finished product.

The simplest design for preparing feshmak at home with a capacity of approximately 160 servings per hour consists of a 220 V electric motor with a power of 50 to 300 W with a rotor speed of 1250 - 1500 rpm and a disk made of sheet aluminum with a diameter of 170 - 180 mm and a thickness attached to its shaft 0.2 - 0.3 mm. To make a disk, you can use tin from a herring can. At a distance of 350 - 400 mm from the center of the disk, a fence made of plastic, linoleum, etc. is installed.
If you seriously decide to start making a feshmak, we recommend using the design shown in Fig. 1.
For its manufacture it is necessary to use materials specified by GOST for the food industry.

Drawings of a machine for producing cotton candy

Rice. 2 Apparatus for making cotton candy “feshmaka”:
1 - electric motor; 2 - power cord; 3 - disk fastening bolt; 4 - the resulting layer of cotton candy.

Note.

The design of the apparatus we propose reflects only the basic principle of the production of “cotton candy”; it is elementary and easy to manufacture. If you wish, you can improve the device yourself by mechanizing some of the manual labor.

Method for making cotton candy.

At high humidity ambient air cannot obtain the product High Quality. In this case, you can close the device with a lid with a hole for pouring caramel mass. Turn off the electric motor and separate the threads from the body. Cut the finished product along the diameter line and roll the resulting semicircle into a tube on the table. Do the same with the second semicircle. Then cut the cotton wool into the required number of servings. The product should have White color and a pleasant sweet taste. When using food coloring, the product takes on a more attractive appearance.
To maintain the high quality of the “cotton wool”, it is necessary to clean the disk from adhering syrup after each working cycle. Feshmak cannot be stored for a long time. outdoors- this is its significant drawback. Sealed packaging and refrigeration will keep it for a day or more.
Do not despair if you are not satisfied with the quality of the product the first time. The main condition for success is the accuracy of each operation.

Surely many people associate cotton candy with childhood, trips to the park or square, which were always accompanied by eating it. Sometimes you want to remember this taste, but a family trip for a walk is not planned yet. In this case, you can make cotton candy at home with your own hands using a simple set of ingredients. Without a special apparatus, the process, of course, will be difficult, but if desired, it can be mastered.

If you plan to prepare this delicacy often, pampering your children and yourself, it makes sense to purchase required device. Its cost is relatively small, it is easy to use and completely safe.

Equipment

If you decide to purchase a device for cotton candy, or more precisely, for its preparation, you need to know how to use it correctly:

The process of making cotton candy using special equipment is carried out in several stages. The device is warming up. Pour 1-2 tsp of sugar onto the disc. When melted, the product turns into crispy, sweet threads. Now they need to be transferred to a stick.

You can use bamboo or sushi chopsticks. They are lowered into a bowl in a vertical position. When rotated, the threads themselves wind around it, forming a fluffy ball. If there are fibers left on the walls of the container, you can also pick them up using a cotton candy stick.

If there is a need to prepare colored treats, you can use dyes by adding them to sugar.

This equipment allows you to quickly prepare delicious sweets, but it also has its drawbacks:

The device is quite bulky. Its dimensions are similar to the size food processor or multicookers;
Inexpensive equipment heats up very quickly, so when preparing cotton candy, they need to be turned off periodically. If this is not done, the device will soon fail.

Do not forget to clean the bowl of the machine, otherwise over time it will be completely covered with a layer of sugar.

Having such a device, you can organize constant production cotton candy. Some even think that it is great idea to create and develop your business.

DIY equipment

The operating principle of the device is simple, which encourages many to create it themselves. To do this, you will need a simple set of materials that can be found, perhaps, in every home, and skillful hands.

Here's how to build this device with your own hands. Clean with a file or sandpaper 2 tin caps (for example, bottle caps). Make a large hole in one of them and several small ones in the second lid, connect them with wire.

Now you need to attach a motor from some home electronic device (for example, a hair dryer) to them. Using wire, attach the entire structure to a board, which will become the base of the device. Using the terminals, attach the motor with the battery (you can use a crown battery).

Place thick cardboard on one side to create a partition. The device in which you can make cotton candy at home is ready and can be used like regular equipment. You can heat the rotating drum using a candle or lighter.

Despite the simplicity of the design, it is not safe, so it is better to acquire original equipment or do without it altogether. A delicacy prepared with your own hands will turn out no worse than one made using a machine.

In a frying pan or in a saucepan

To start, practice cooking with a small amount of ingredients. The process will require skill. In this regard, it is possible that the first couple of times you will just have to practice.

Ingredients:

Sugar – 2 tbsp. l.;
water – 0.5 cups;
vinegar – 2 drops;
fork, Chinese chopsticks.

Cooking method:

That's the whole cooking principle. Don't forget about safety precautions. Hot sugar syrup can burn if you are not careful when handling it.

If the first time the cotton wool does not turn out as you expected, there is no need to be upset - next time it will be better.

Colored treat

Colored cotton candy is especially loved by children and adults, but how to make it at home? It's absolutely not difficult. Today there are a huge number of different dyes and food additives on sale that will allow the treat to gain a new taste.

The most popular dyes: yellow curcumin, red betanin, yellow saffron, purple anthocyanin, fiery red paprika. True, when studying their composition it becomes clear that natural ingredients There is very little there - just chemicals. When preparing treats for children, you should not use such components.

You can make colored cotton wool using the juice of fruits and berries (strawberries, raspberries, lemons, oranges, mint syrup, etc.). It diversifies the taste and gives beautiful colour. The technology for preparing the treat will not change - just add the juice to the rest of the ingredients.

If you cook in a frying pan (or in a saucepan), use less water - the required volume of liquid will be replenished with juice. Having prepared several syrups with different additives, you can connect their threads, then the sweetness will turn out to be multi-colored.

When preparing the ingredients, it is important to note that the sugar for making cotton candy must be of the highest quality. You should not use dyed raw materials - most likely, they were used to give color chemical substances, so just use natural dyes.

We will show you how you can make cotton candy at home and make a device for it with your own hands from regular fan. To work, we will need 2 CDs, cut out two “washers” from them:

They are made easily and simply, you put something round on the disk, for example a coin, and trace it with a marker. After that we heat it up stationery knife and easily cut out all the excess. A hole in the center can be made using something also heated on the stove.

To begin with, we take the remaining disk we have and glue our washers to it, we need to do this strictly in the center, if we neglect this rule, our disk will vibrate, and in the end nothing will work.

Our attachment for the cotton candy making machine is ready, now let’s move on to the fan. Lay it on the floor and remove it protective cover, then remove the propeller. Take the middle box and make a round hole in its bottom:

Our machine for making cotton candy is ready, as you can see, everything is done with your own hands, very simply and at home. Now all that remains is to prepare the syrup.

DIY cotton candy machine

It is done very simply, put a large metal mug of water or a small saucepan on medium heat, add 50/50 sugar and water, mix everything thoroughly. The syrup will be ready when a yellowish tint appears, but under no circumstances should it be dark brown. Now you can proceed directly to making cotton candy, turn on our machine and begin pouring syrup into the “disc” in small drops:

The result is excellent cotton candy, no worse than the one you could try in parks and at public events. After making cotton candy, the fan is easily put back together.

Video on how to make a cotton candy machine with your own hands:

Backup video lesson on how to make a cotton candy machine at home with your own hands:

Do-it-yourself cotton candy making machine

We are pleased to present you with the drawings of the device and the technology for preparing “FESHMAKA”. It won’t take you much time to make a simple device for preparing it.
Feshmak is a caramel-type product, popularly called “cotton candy”, usually in the form of a bundle of elongated thin white threads.
One kilogram of sugar produces up to 80 servings of the finished product.

Homemade cotton candy

P.
If you seriously decide to start making a feshmak, we recommend using the design shown in Fig. 1.
For its manufacture it is necessary to use materials specified by GOST for the food industry.

Rice. 1
1- electric motor;
2 - working disk;
3 - container made of material recommended by GOST;
4 - bushing;
5 — stand on wheels (4 pcs.)

Rice. 2
Apparatus for preparing “feshmak”:
1 - electric motor;
2 - power cord;
3 — disk fastening bolt;
4 - the resulting layer of cotton candy.

Note.

The design of the device we propose reflects only the basic principle of the production of “cotton candy”; it is elementary and easy to manufacture. If you wish, you can improve the device yourself by mechanizing some of the manual labor.

Method for making cotton candy.

First you need to prepare the caramel mass. It is prepared without making molasses, which simplifies the cooking process. The mass is not candied due to the formation of invert sugar under the influence of vinegar essence added in the middle of cooking. So, granulated sugar is dissolved in a small amount of water (about 3 parts sand to 1 part water) and boiled for 10 minutes, after which vinegar essence is added (3 ml of essence per 1 kg of sugar) and the mass is boiled again for 10 - 12 minutes. After this, the mass is heated over very low heat for 25 - 30 minutes. until a strong caramel sample is obtained with a moisture content of 1.5 - 1.7%. Humidity is determined by the boiling point of the mass. At the beginning of boiling it should be 100 - 105?, and at the end - 135 - 145?. Without allowing it to cool, pour the finished mixture in a thin stream onto the edge of the rotating disk (2 - 4 mm from the edge). To do this, it is convenient to use a small enamel ladle. Hot syrup, breaking into thousands of thin threads, hardens at room temperature, forming a layer of “cotton wool”.
With high ambient humidity, it is impossible to obtain a high-quality product. In this case, you can close the device with a lid with a hole for pouring caramel mass. Turn off the electric motor and separate the threads from the body. Cut the finished product along the diameter line and roll the resulting semicircle into a tube on the table. Do the same with the second semicircle. Then cut the cotton wool into the required number of servings. The product should have a white color and a pleasant sweet taste. When using food coloring, the product takes on a more attractive appearance.
To maintain the high quality of the “cotton wool”, it is necessary to clean the disk from adhering syrup after each working cycle. Feshmak cannot be stored outdoors for a long time - this is its significant drawback. Sealed packaging and refrigeration will keep it for a day or more.
Do not despair if you are not satisfied with the quality of the product the first time. The main condition for success is the accuracy of each operation.

This material was taken from the site http://freeseller.ru

Perhaps everyone likes it. However, it is not advisable to purchase a device for its manufacture solely for home purposes. After all, installation costs a lot of money. However, you can make a cotton candy machine with your own hands.

Is it possible to do it yourself?

Almost everyone can create a machine for making cotton candy with their own hands. This requires few materials and tools. You will need a large saucepan, as well as some accessories that can be found in anyone's pantry. With a little effort, you can create a device without spending a penny. With help homemade device You can make any quantity of treats at any time.

Required parts and tools

So, as already mentioned, to make the apparatus you will need a large saucepan. But that's not all. You also need a special container where the sugar will be poured. The container must be made of fire-resistant material. After all, the sugar will heat up and melt in it. In this case, the container should rotate and throw out thin threads of cotton wool. Of course, that's not all. So, to create a machine for making cotton candy with your own hands, you will need the following tools:

Several drills, it is advisable to have a very thin one on hand - no more than one millimeter in diameter, and a drill.
or metal scissors.
Set of files.
Soldering iron.

Device components

A sweet made without a machine is unlikely to turn out so airy and light. To create the device you will need the following components:

Jet lighter. Such a device is characterized by a blue flame. This type of lighter produces heat that is significantly higher than the heating temperature of conventional lighters. When burning, the device does not emit soot. It is worth considering that the lighter should be installed so that it can burn on its own. It will be much more convenient.
Power supply for the electric motor. It could be a regular battery.
Electric motor direct current. The device must be powered from low voltage.
A tin can, for example, for vegetables.
Lid small sizes for a lighter.
Bucket or large saucepan.
Washer, bolt, nut.
A rod longer than the length of a metal or wood pan.
Tube 15 centimeters long.

Lighter mount

Let's look at how to create a cotton candy machine with your own hands. First you need to create a stand for the lighter. To do this, the device must be wrapped in two layers of cling film. To secure the lighter, you need to mix a small amount of epoxy glue, apply it to the milk cap and glue the lighter. When everything has hardened, you need to take the device and remove the film from it. That's all, the lighter stand is ready. It can be removed at any time.

Installation of rod and motor

In order for a ready-made cotton candy machine, created with your own hands, to work, you need an engine. It can be connected using a short tube or a metal rod to a tin can. It's much more convenient. It is worth making one hole at the ends of the tube or rod. Each of them has its own purpose. One will serve to connect to the motor shaft. You can secure it with superglue. You can also use a locking screw. IN in this case another hole will be needed. However, this method allows you to remove the engine if necessary.

The second hole is needed to attach a tin can. It is best to secure the container with a bolt. After this, the engine must be mounted on cross bar. This is done very simply. It is enough to drill two holes in the center of the strip. It is better to secure the engine with two screws.

Preparing the Can

So, the machine for cotton candy is practically made with your own hands. The tin can will serve as the container inside which the sugar will melt. To do this, you need to pour the product into it and spin it. A hole should be made along the top edge of the jar. The top cover must be completely removed. It is better to clean the edge with a file.

You need to make a lot of holes on the sides of the tin can, preferably near the bottom edge. To do this, you should use drills with the smallest diameter that exists. It is better to retreat one centimeter from the bottom seam, and only then can you make holes.

Installing the container

It is worth making a hole in the tin can for attaching directly to the rod. The container will be secured using a nut and bolt. If desired, the can can simply be soldered to a metal rod or nailed to wooden plank. However, bolting is the best option, as it allows you to replace the container.

The jar should be located above the fire source inside the pan or bucket.

How to prepare cotton wool

That's all. The DIY cotton candy machine is fully prepared for use. It's quite simple to use. Just light a lighter, pour a little sugar into tin can and start the engine. The lighter should be installed inside a pan or bucket.

As the jar heats up, the sugar will begin to melt and fly out through the holes in the jar, forming cotton candy fibers. After production required quantity All you have to do is collect the goodies on a bamboo skewer. As you can see, everything is simple.