Purchasing furniture is a rather expensive procedure that is not always affordable. This especially applies to non-essential furniture items. However, there is a way out - to create an accessory yourself. This requires minimal experience with tools, creativity, patience and imagination. In this article we will tell you how to make a coffee table on wheels with your own hands from simple materials at hand, and show photos of successful examples of finished products. The latter will be a good decoration for any bedroom, living room or children's room. Very often such furniture is placed in cottages on summer terraces, where it emphasizes the existing style and subtle taste of the owners, and also creates the desired atmosphere of comfort.
DIY coffee table
There are many ways to make such an accessory. To make it work, you only need minimal carpentry skills and a limited amount of materials. During the process, the master will not need any drawings or any diagrams. All you need is a small piece of hardboard and a few legs (depending on the design, 3-4 pieces), which can be purchased at any furniture or hardware store.
Take a sheet of paper in a one-to-one size and use a construction tape measure to find the center. To do this, draw two straight lines and mark the point of their intersection. Drive a nail into the center to which the thread is attached. A pencil is fixed on the opposite side of the thread (it should look like a large compass). The handle determines the size and shape of the round tabletop. Next, everything is even simpler - cut out the part, process the edge, apply paint and varnish. At the final stage, install the legs.
Wooden table in country style
If you prefer simplicity and understatement, then rustic furniture is exactly what you need. But this is purely a matter of taste and everything can be adjusted. A simple rectangular shape and natural wood texture will be a wonderful addition to a country-style interior design.
Schemes on how to build a table for tea drinking
Below are popular assembly drawings wooden structures countertops You can put them into practice. All instructions are visually clear and shown in the form of step-by-step pictures. The main rule: measure several times and only then cut. To avoid cracking the wood, make preliminary holes with a drill in the fastening areas.
Super simple
The project is suitable even for people who have never been involved in carpentry in any way. You just need to cut a tabletop of the required size from a piece of plywood and 4 legs from rectangular or square shape. Make decorative bevels at the end of each leg. A wood miter saw is used for this. Then combine all the details into one composition. For a clearer understanding, it is advisable to number all elements in pencil.
Square
It is a solid design that will appeal to lovers of the classics. Boards for organizing the tabletop will not be cheap, so if you are on a limited budget, use plywood. Legs can be selected or ordered separately. Even with purchased parts, this option will cost much less than a ready-made purchased model.
Tall in rustic style
An original thing that not everyone will like. This design looks good in modern interior design, against the backdrop of expensive furniture. On step-by-step photo instructions it is clear that the assembly is simple and is carried out like a stool, albeit with some nuances. To give the table a noble look, decorative cross sides are used.
Carved
Furniture that looks like a museum exhibit is made with your own hands at home. The pictures below show all the stages of making this masterpiece. The master gave this product a figured relief using an ordinary knife. A little imagination, talent, perseverance and patience, and you can decorate your home with a luxurious item.
On trestles
Typically, in carpentry, this design of legs is not used. However, no one forbids its use. A table can become the highlight of any living room interior, giving the room a Mediterranean flair and flavor.
Rustic style
Quite a popular model, which looks very similar to the previous version. Here, instead of trestles, classic-looking legs are used. The photo selection clearly shows all the manufacturing stages, which, if desired, you can repeat yourself.
Classic with drawers
An interesting multifunctional solution for a living room or bedroom that you can make yourself. To give the structure a stylish antique look, you need to carefully work with the decorative coating. You can use various stains and ship varnish. During the manufacturing process, many have difficulties with drawers. There are several recommendations regarding this:
- . Make sure that right angles are maintained everywhere and that there is no deformation of the wood.
- . Make the first box right away, try it on, if everything is good, then create the second one according to its dimensions.
- . Always compare the details with the drawing and know that nothing is perfect. A slight curvature is quite acceptable.
With metal legs
Here the main material is solid birch, walnut bars and connecting elements. When everything is in place, you can start working:
- . Cut the boards into strips of equal size.
- . Pack them tightly cutting edges one way.
- . Carefully apply a layer of glue (make sure all edges are sealed securely).
- . Secure all elements with clamps, wipe off excess adhesive solution.
- . After drying, use a cross-cut saw to trim the edges.
- . Cut a 20 mm recess in the boards, so that there is 1 cm of margin at the top and bottom.
- . Spread the foam into equal strips, 30 cm wide and 20 cm long.
- . With help table saw Make an even chamfer on the lower edges, at an angle of 45 degrees.
- . Sand all parts of the structure with a grinder.
On last stage screw the legs.
With shelves
A beautiful product that is easy to assemble and has affordable materials. A convenient shelf gives the accessory solidity, and thin stiletto legs add lightness and sophistication. If a person has ever worked with a drill, then creating such a structure will be a trifle for him. The pictures show what is done and how.
Large coffee table for living room
An ideal option if you need roomy and at the same time non-bulky furniture. It will be a wonderful addition to the interior of a living room or bedroom.
Rectangular
Making furniture with your own hands is a fun activity, and most importantly, an inexpensive way to furnish your home. When deciding on a model, it is necessary to take into account the location and functional load of the piece of furniture. This option will fit into almost any room.
With round table top
The accessory can be assembled from parts from old and antique furniture. Round form it looks noble and is very relevant in rooms where there are small children - there are no corners and a child cannot be injured by such a product. For the countertop, it is better to purchase a high-quality sheet of plywood. The final decoration is individual, depending on the materials used and the taste of the master.
Folding
Tables classified as coffee tables often play a decorative role in rooms - they serve as a stand for flowers, remote controls, the press, and are less often used for morning and evening tea parties. But for work, for example, with a laptop, such accessories are not suitable or require improvement. A folding tabletop that rises to a certain height would be ideal. A simple mechanism made from wooden blocks and a regular box as a stand will make your table multifunctional. Also, under the lid of such a product you can store a lot of useful things.
With a pop-up top
Here is an excellent modernized model homemade table with a height-adjustable tabletop. The mechanism makes it possible to lift work surface to a computer-friendly level. It also turns out to be a good place for a quick snack in front of the TV. However, to mount such a mechanism you will need patience, a little ingenuity and welding.
Coffee tables made from pallets
A separate group of furniture accessories made from recycled building materials. It is practical and cheap.
DIY table made from pallets
One of the most economical options coffee table, which can be made from available materials. You will need a sheet of plywood of medium thickness, one pallet that is as smooth and free from defects as possible, and an iron welded metal frame. If you have any difficulties with the last part, it doesn’t matter - it can be made of wood.
DIY metal legs for a coffee table - drawings and dimensions
An original product based on construction pallets will fit perfectly into a simple rustic interior in country, Provence or eco style. In addition, the project will allow you to save a lot of money and show your imagination. The model will be exclusive and in one copy. You can place it near the sofa and store remote controls and newspapers in it. For manufacturing you will need a pallet. The latter may differ in the size and pitch of the boards nailed on top. To create a flat surface, pallets are disassembled and fastened tightly. Then everything is sanded and covered with stain and varnish.
Original do-it-yourself coffee table
The table can be made mobile by organizing a wheelbase. Everything is very simple here, even step-by-step instruction not required. Take two pallets and connect them inside. In this case, the lower one will have to be disassembled in order to attach the boards tightly and screw the wheels to it. You can put glass or a sheet of plywood on the top tray. The entire structure must be treated with stain or decorative paint and varnish.
Examples in the photo
Below are the most popular and sought-after models of homemade coffee tables.
From wooden boxes
The hard part of the job is finding the materials. But once you have found the boxes, they need to be processed: sanded, fastened with a sheet of plywood, varnished or painted. If desired, you can screw on the wheels.
From a car tire
When we talk about available materials, we cannot fail to mention ordinary tires. A little imagination, patience, and skills in working with tools and you will end up with a unique thing.
Glass accessory in high-tech style
You can make a small simple coffee table from glass with your own hands. This is not an easy task, but it is doable. The main thing is to choose the right glass material - triplex with a sheet thickness of 10-12 mm is best. Next, everything is according to the diagram: we make a drawing, use it to create a pattern, and cut the tabletop to size. We process, grind the edges and install the finished canvas on a pre-fabricated support structure.
Glass coffee tables
There are many product options here that fit well into modern design interior There are both complex designs, and those that you can do yourself.
As shown in numerous photos, they look especially good exclusive ideas DIY coffee tables made from scrap materials.
Unusual solution
A vivid imagination and minimal experience with tools is all that is needed to implement such a project. You definitely can’t take away his extravagance and originality.
From a wooden barrel
Not a bad idea to implement. From a technical point of view, creating such a product is not easy, but all the efforts made will pay off with interest. An accessory with an opening tabletop looks especially elegant and practical.
How to make a coffee table-clock with your own hands from scrap materials - photos of step-by-step work
A very interesting idea to add a clock mechanism.
DIY shelf table
A good option mobile furniture on wheels. To make such a masterpiece you will need a minimum set of materials - plexiglass, wooden blocks, plywood and four stainless metal tubes. Assembly is not difficult, and the result will delight generations.
From round wood
A similar product from sawn wood is quite easy to make. However, in this case, simple does not mean fast. If the material is freshly cut wood, then it must be allowed to dry. Next, you should carefully treat the surface and open it with varnish.
From birch logs
Birch is a wonderful material that fits into many interior styles. It has a pleasant color and radiates lightness and warmth.
From willow branches
Simple and at the same time original design- a dream for connoisseurs of eco-style. This is full-fledged furniture created on the basis of branches. The material can be found on almost every street. A room furnished with such attributes looks like something exotic.
Modern
High-tech products are gaining enormous popularity. You can create such an interior item yourself. To do this you will need non-standard imagination, fiberglass, epoxy resin and dyes. The pictures show step-by-step assembly.
From glass bottles
A very unusual approach; below are drawings with the dimensions of such products.
Homemade giraffe table
Using an electric jigsaw and a small sheet of MDF, you can create an original coffee table in the shape of the famous African animal.
In the form of a tetraerd
A conceptual model in a complex geometric image is an interior item that will fit perfectly into any office space. Combine individual elements, and you will receive a unique item that will become the highlight of the design.
From the lids
In pursuit of extraordinary ideas visionary craftsmen create truly unique accessories. Check out this tabletop made from regular bottle caps.
On gas keys
Corner table in the hallway
If the corner is in your living room is empty, so there is an opportunity to fill it original furniture. Outwardly, it resembles a bookcase containing several baskets for storing things.
Photos of original products
A selection of photographs of unique tables will allow you to gain useful ideas.
DIY restoration
If your favorite accessory has lost its former attractiveness, there is no need to immediately send it to the landfill. There are many ways to breathe into it new life- modeling, painting, patination, tinting and other methods.
Coffee table made from a Singer sewing machine
If you are the owner of a frame from an antique mechanism, then you can remake it into an expensive piece of furniture.
Schemes and drawings - photos
Below are schematically presented the most popular models of coffee tables and coffee tables.
Tables for magazines - photo
Photo selection of the most original products that anyone can make.
Making furniture with your own hands is not only great way save money, but also the opportunity to put your creative potential into practice!
We will talk about making coffee tables with your own hands. There is no such thing as too many side tables. They can be placed next to the sofa to place a vase of flowers or a mug of tea, or used as bedside table or as a stand for potted indoor plants. However, monotonous wooden tables are unlikely to liven up a dull interior. I want something stylish and unexpected...
Stylish table made of wooden slats with your own hands
This bench can serve as a coffee table, extra seating or storage space indoor plants. This piece of furniture will “fit” well into almost any interior!
DIY coffee table photo
Materials:
Tools:
Step one: Using a hacksaw, cut the ends of two 2.5 x 7.5 cm boards at a 45 degree angle. Cut out fragments from 2.5x5 cm bars, the length of which will correspond to the internal length of 2.5x7.5 cm blanks.
how to make a coffee table with your own hands. Photo
Step two: Place 2.5x5 cm of the workpiece in the middle, and 2.5x7.5 cm on the edges. Make sure the ends of the inner slats are aligned.
Step three: Measure the distance between the outermost 2.5x7.5 cm bars and cut two pieces of this length from 2.5x10 cm boards. They will serve as lower supports for the bench. Secure them by screwing self-tapping screws into each longitudinal rail.
Step four: Using a Kreg Jig, drill two pocket holes at each end of the support crossbars. These holes will be used to connect to the 2.5 x 7.5 cm edge bars.
Tip: It is difficult to give specific recommendations regarding how far from the edge to attach a Kreg Jig. This depends on the length of the screws used, the exact thickness of the board, etc. We advise you to first practice on unnecessary scraps of boards.
unusual coffee table with your own hands. Photo
Step five: Place 2.5x7.5 cm blanks along the edges of the structure. After making sure that their ends are at the same level, secure them with clamps.
Tip: If you use soft wood (for example, pine) to make the table, place unnecessary scraps of boards under the clamp supports. Otherwise, marks from the clamps will remain on the wood.
Step six: Securely attach the outer 2.5x7.5 cm bars to the base of the bench by screwing 3.5 cm screws into the countersunk holes that you made a little earlier at the ends of the support crossbars.
coffee table made of wood. Master Class
Step seven: Measure the width of the fabricated base to determine how long you need to cut the 2.5 x 7.5 cm blank for the ends of the bench. We recommend that you make a cut with a small margin in length, and then slowly grind off the excess until you achieve the perfect fit.
Step eight: Wet the ends of all slats with water and apply a small amount of Gorilla Glue.
Step nine: Place the end boards in their intended place and secure the entire structure with a belt so that it does not fall apart while the glue is wet. For reliability, you can additionally secure the ends with several finishing nails.
Step ten: Sand the surface of the bench sandpaper 120 grit to eliminate all unevenness at the joints. Fill all gaps in the seams and recesses from nail heads (the latter must be recessed into the wood) with putty. Once the putty is dry, sand the surface again, this time with 220 grit sandpaper.
Step eleven: Paint the bench. We recommend that you sand the surface again using 400 grit sandpaper and water before painting.
Step twelve: Install special mounting plates on the lower support crossbars to secure the legs. When attaching them, make sure that you drill holes in places where there are no screws already screwed in. The distance from the fastening to the edge of the base of the bench should be about 2.5 cm. Screw the legs themselves into the fastenings.
Coffee table made of copper pipes. Master Class
The material for making the next table can perhaps be called the most unexpected. This time we decided to tell you how to make a table with your own hands from... copper pipes OK.
Materials and tools:
The figure below shows all the parts (pipes (A-E) and various connecting elements (F-H)) with their sizes and quantities. All that remains for you is to take it in your hands pipe cutter and sit in front of the TV, which will brighten up the tedious cutting process a little. It's not difficult, just a little boring. 😉
When all the pieces are ready, you can begin assembling the lower part of the table. How to do this is shown in the figure.
Having assembled the lower tier, you can proceed to the upper one. The only parts not listed in the parts list are the four 2.5cm pieces of pipe that fit into the tees at the top. corner posts. Without these inserts you will not be able to put on decorative caps, because... the latter have the same diameter as the tees.
Reliable connection of the tubes with each other will ensure glue, but we recommend applying it only after preliminary assembly of the structure, i.e. after you make sure that all the cut tubes are the correct length and fit together well.
Wooden shelves, which you can pre-paint if you wish, are secured using special clamps that are placed on the underside of each board. Now you're ready to decorate your home with a new, handmade table!
DIY lightweight cement table
Countertops and other interior elements made from concrete have become increasingly popular recently. However, for all their attractiveness, they are not without a number of disadvantages. Firstly, pouring large quantities of concrete can sometimes be quite an expensive undertaking. Secondly, when it comes to small side tables, another serious problem emerges - such furniture turns out to be too heavy. On the one hand, there is a desire to get a good, solid thing, on the other hand, you want to be able to move a table you made with your own hands without the help of professional movers. The solution found can be considered an insight.
Materials and tools:
Step one: Mark and cut out the foam sheet. From a 120x240 cm piece you can cut 18 squares of 40x40 cm. By stacking them on top of each other, you will get a parallelepiped 40x40x45 cm.
DIY foam table. Photo
Step two: Glue the cut pieces together. 3M Super 77 aerosol adhesive is ideal for this. It is better to perform this stage of work outdoors. Don't forget to wear gloves and a long sleeve shirt. Apply even layer glue to one side of the first square, then do the same with the second. Wait ~15 seconds, then connect the squares, making sure their edges meet. Repeat this until all the square pieces are joined into one piece. Wait about 30 minutes before moving on to step 3.
Step three: Now the most interesting thing... giving the resulting parallelepiped the outline of the future table. We decided to make a table in the shape of a cylinder. You can come up with something more original or, on the contrary, keep the original block with right angles. Cutting foam is easy and fun. Your design will have a rough, angular appearance at first, but don't worry! After the table is given required form, it's time for sanding. Using 36 grit sandpaper will quickly smooth out any rough edges. As you get closer to the ideal, gradually move on to sandpaper with a finer grain size. Do not strive to achieve a super smooth surface; at this stage it is important for you to achieve only the required shape.
Step four: The surface of the future table has been sanded, it’s time to cement it. The first layer, applied over the entire foam mold, will fill in the voids and texture of the foam. You only have ~20 minutes, so work quickly so you have time to smooth out any rough edges. Once the applied cement mortar has dried, you can apply the next layer. The number of coats depends on how smooth and even the final surface you want (usually four to five coats are required). It should be remembered that the smoother the surface of the final layer before it dries, the less sanding it will have to do!
Tip: When cooking cement mortar follow the manufacturer's instructions. You should not prepare more mortar than you need to apply one layer (for example, we used 220 ml of water and 450 g of cement). Make sure you don't forget to cover the surface of your workbench or workshop floor, because this job is quite dirty.
Step five: After the last cement layer has dried, you can sand the surface if desired. We wanted to achieve a glossy finish on at least the top of the table, so we sanded it using varying grit sandpaper ranging from 100 to 2000 grit.
Tip: If you are planning this operation, purchase a protective mask that will help you protect your lungs from cement dust
(The table made in this project turned out to be very durable and strong, but at the same time it weighed no more than a kilogram.)
DIY stump table
The material for the next table is sometimes literally lying under your feet. Even residents of megacities will be able to find a suitable stump if they wish.
log table. Photo
Materials and tools:
- wooden block;
- white acrylic paint;
- hand grinder;
- chisel;
- hammer;
- decorative upholstery nails;
- molar tape.
Step one: Find a table base! This should not be an old rotten stump, but a freshly cut log. Allow it to dry for at least 6 months (nothing is worse than waiting, but it must be done) until the bark begins to separate from the trunk.
Step two: Using a chisel, use a downward motion to carefully scrape away the bark from the log. If the stump is dry enough, you won't have to use too much force to do this.
Step three: By using grinder With medium-grit sandpaper, sand the surface, removing any remaining bark and smoothing out any sharp corners. Don't forget to sand the surfaces of the lower and upper cuts. Wipe the wood with a damp cloth.
Step four: It's time for painting. We used white semi-gloss paint that included a primer (we needed three coats for full coverage). You can choose a different type and color of paint, focusing solely on your taste. Don't forget to prime the surface of the wood first. Make sure you don't forget to trim the bottom cut.
Step five: Prepare decorative nails. Glue a strip along the upper edge of the side surface of the log masking tape, thereby marking the place where the first row of nails will be located.
Step six: Use a hammer to hammer in the first row of decorative nails. To ensure that the distance from them to the top edge is the same throughout the entire “line” of nails, use the strip of masking tape you previously glued as a guide. Once the first row is completed, repeat with the second and third row of nails (we needed almost 150 nails for three rows).
Tip: Cover the bottom surface of the stump with furniture felt so that you can move the table around the room without damaging the flooring.
The work is done. You can enjoy your new piece of furniture and be proud that you made this charming coffee table yourself.
Coffee tables: do it yourself
Wooden table: how to make?
Many people are interested in how to make a wooden table with their own hands to get a model with an original appearance. Let's consider one of the options.
To make an original coffee table with your own hands, you should take timber with a section of 5x10cm. It is cut into pieces of the following lengths: 130cm - 9 pieces, 21cm - 12 pieces, 34cm - 2 pieces.
The prepared timber is placed in three rows, leaving space for attaching the legs.
The top two rows are removed. The beam in the third row is slightly shifted to get an interesting appearance. Next, mark the places for attaching the transverse parts.
Lay the outer bars of the second row and mark the places of cuts. Then the cuts are made circular saw or a hacksaw with a chisel.
The bars of the second row are secured with screws.
Lay the third row, move the parts and secure them.
An empty space is formed under the tabletop, in which they fix legs.
The wood is processed protective composition, preserving the wood texture.
Original model of a wooden coffee table with your own hands
First, to make a table with your own hands, prepare planks: 6pcs - 22.5x45cm, 2pcs - 22.5x41cm, 8pcs - 20x4cm, 8pcs - 40x4cm.
Planks 20x4 and 40x4 are glued in pairs. To ensure they stick together securely, they are clampedclamps.
While the leg blanks are drying, assemble box from the remaining parts. They are connected with wood glue and nailer.
Legs They are attached to the box with countersunk screws. Crossbars are placed between the legs at the bottom.
cover for a wooden table they are also made using 22.5x45cm planks. They are glued together, and then the resulting square is sawn into two triangles.
One triangle is secured with screws, and the second triangle is secured with slats so that it is removable.
All parts are sanded and painted.
Stylish coffee table. Master Class
Start making a stylish table with your own hands by marking the sheet Chipboard 16mm thick. The center is found on the sheet at the intersection of two diagonals.
A nail is driven into the center, to which a thin rope or harsh thread is tied.
A pencil is tied to the free end. This allows you to draw a circle.
If you want to make a table with your own hands that is not round, but of a more interesting shape, then the shape of the circle is changed by drawing curves.
The table top is cut out jigsaw or a reciprocating saw.
Edges are processed sandpaper.
Legs secured with screws. If they are located obliquely, then the slope should be outward.
Table surface paint in the desired color.
Simple coffee table
To make a coffee table with your own hands, take boards 40x15cm - 2 pieces and 50x19cm - 2 pieces. In addition, you will need legs and mounting plates.
A larger one is fixed on one of the boards plates for attaching legs. You should step back a little from the edges.
The sides and top of the table are secured with wood glue.
It dries in about half an hour.
DIY log table
A self-made coffee table with this appearance will decorate your dacha or country house. Work begins by assembling the frame. To do this, take sheets plywood two centimeters thick. A base with dimensions of 60x80cm is cut out of them. A box 68cm long, 45cm wide and 40cm high is attached to the base.
DIY log table. Photo
After this, thirty round pieces are cut logs 45 cm long and twenty-four round cuts, the thickness of which is 3 cm.
The prepared logs are secured around the perimeter of the box. Fixed from below to the base rollers. They are installed at a distance of three centimeters from the edge.
In addition to glue, it would be useful to secure the logs with screws from below.
Installed on the box plywood cover. Round circles are glued onto it. The space between them is filled with wood putty, which does not shrink when dried. Apply it in stages so that the previous layer has time to dry.
After the putty has dried, the surface polished. For this, a surface grinder is used. After this, the log table can be used.
Country style table
If you are interested in how to make a table from wood cuts with your own hands, then you should read the instructions.
They begin making such a coffee table with their own hands by choosing the appropriate material.
Selected slept We inspect for any interesting parts or parts that need to be removed.
Excessively rough, protruding parts are cut off. On the side where the tabletop will be, the surface level.
Used for work cleaver, which moves at an angle of forty-five degrees.
The sides also need to be leveled.
All surfaces polished, using ever-decreasing grain sizes.
Glossy varnish mixed with resin in equal parts.
The resulting composition is applied to the wood in a thick layer. It will take a long time to dry. If cracks appear during the drying process, they must be filled.
Bottom side clearing out. If there are voids in the tree, they are filled with resin gradually until the hole is filled.
If there are air bubbles in the dried resin, the surface is heated with a heat gun or burner.
A second layer of resin is applied and again left to dry for two days. The entire surface of the tabletop should be glossy.
The part of the ax handles is cut off at an angle of 22 degrees. The surface is sanded and painted in the desired color.
Mark places for legs and make holes.
Glue is poured into the holes and the legs are installed. Special pads are attached to each.
White coffee table
Make such a coffee table with your own hands from plywood And glass First, prepare a drawing and determine the dimensions. Then they proceed directly to production.
DIY coffee table. Blueprints
Plywood acts as a tabletop box with partitions, covered with glass on top. Triangular legs are attached to it.
You can make a door at the box to access what's inside, or you can lift the glass.
LegsFor a table with your own hands, it is better to cut it out of fairly thick plywood. It must be remembered that double legs are easier to make than large quantity single.
When all the parts are ready, they are assembled together and fastened. The table is painted or varnished.
DIY table made from pallets
If you know how to make a table from pallets with your own hands, you can get an interesting version of furniture for your home. Pallets must first be sanded, sawn into pieces and primed.
table made from pallets. Instructions
A table is assembled from the prepared material. To do this, attach legs or wheels. A pallet directly or a surface assembled from individual planks can be used as a table cover.
After all the parts are connected, the structure needs to be painted or varnished. After this, the table made from pallets is ready.
Second version of a table made from pallets
To make such a table with your own hands, you will need one or two pallets. You should first draw a sketch of the future product, taking into account all dimensions.
The table will have a shelf for small things under the table top. The structure is assembled from prepared parts.
The surface is painted black, but this is not the only possible variant. There are many other decorating possibilities.
Coffee table stand
Option on how to make a table from copper pipes with your own hands, may be of interest to many craftsmen.
The pipes are first marked and cut. Then they are coated epoxy glue and assemble the base for the table.
This base is applied to the board and the fastening points are outlined. In these places you will need to drill holes by pipe diameter.
Four holes are drilled, but not all the way through.
The board is impregnated polyurethane and cover stain.
The remaining one is collected from the pipes frame.
Legs and base cover paint in the color of the tabletop.
Made from a piece of cloth pocket, which is hung on the transverse parts of the legs.
All parts are assembled together, adding epoxy glue for reliability.
DIY marine style table
This table is from an old one window frame looks very romantic. The frame is cleaned of dust. If necessary, replace the glass.
Wooden surface paint white acrylic paint. After drying, the paint layer is sanded so that the wood appears. An option is also available in blue and white.
To make the legs, take stalk and sawed into pieces of 34 cm. After this, it is treated with sandpaper to remove roughness.
The blanks are drilled in four places. Next, each leg is attached to the base, and the base with legs is attached to the frame. All this is done with self-tapping screws.
The legs are covered with coarse rope.
For peeled and low-fat glass glue sea souvenirs and seafood. They must be covered with glass on top, which is cut in the workshop to the size of the frame.
A loop is made at one end of the rope. The rope is glued around the perimeter of the frame, leaving the loop free. When the other end reaches it, an interesting sea knot is tied.
Coffee table can be just a functional surface, or can become an excellent decorative interior detail.
A table made of natural tree. You can buy it in a store or manufacture on one's own.
Magazine tables, handmade, decorate different ways, sometimes turning an ordinary piece of furniture into a masterpiece design thoughts.
Coffee table options
View, The size and decor of the coffee table can be completely different. The only limitation is your imagination.
The most common and tables available in production:
- square or rectangular wooden table;
- round and oval table;
- table transformer;
- glass table;
- table made of combined materials (for example glass and wood).
Note! A set of two or three tables will make gatherings in the living room even more comfortable: each guest will have a personal surface for a cup of coffee or a glass of wine.
What to make a table from
Materials, which are used to make magazines tables:
- tree (solid array, timber);
- hemp;
- glued panels;
- plywood;
- glass.
But on your own manufacture a coffee table can be made not only from traditional materials. Tables made from assistants funds and old things such as suitcase, window frame, large coil, pallets, etc.
Important! If you have chosen glass table, make sure that it is made of quality tempered glass, which will ensure the reliability, durability and safety of the product.
Materials and tools
The most beautiful and various the shape of the tables is made of wood, chipboard or MDF. The material for the coffee table should be calculate in advance.
For simple table the following will suffice elements:
- bars for legs (4 pcs.);
- thick board, panel or a sheet of plywood for the countertop;
- corner fastenings for connecting the tabletop with legs (4 pcs.);
For round coffee table you will need:
- 2 round details made of chipboard or MDF (table top and support for table wheels). Diameter 60 cm;
- rectangular parts for legs(2 pcs.). Size 60 x 40 cm;
- wheels(4 things.).
- putty for wood;
- glue carpentry (for wood).
You must also purchase impregnation And varnish, so that both contamination and imparting to the product Beautiful appearance.
In addition, to make a coffee table you will need the following: tools:
- hammer;
- nails;
- screwdriver or screwdriver;
- corner fastenings(not necessary);
- Master OK.
Round coffee table
Must be pre-ordered details from fiberboard or MDF. Can do them independently, but it should be noted that the tabletop and support for the wheels must be ideal forms. This will give the coffee table a sophisticated and careful view.
Stages of work
Step 1. IN rectangular shapes need to make small ones cuts in the center to insert them into each other. The cuts are made in accordance with thick chipboard (MDF) sheets.
Step 2. We connect the rectangles using cuts. We coat the joints with carpentry glue. This is necessary to ensure that the table parts hold tightly.
Step 3. Apply on top table top. We nail it to the legs with thin nails. For small table one is enough nail in the middle and one nail for each leg.
Step 4. We turn the table over and nail the support for wheels. We also use glue and 5 nails.
Step 5. Carefully cover the nail heads putty.
Step 6. Processing a coffee table impregnation for wood. Cover with varnish or paint.
Step 7 When last layer varnish or the paint is completely dry, you can screw on the wheels.
The coffee table can be left in this condition, or you can additionally decorate.
Important! Before you start assembling the table, you should cover the ends of all parts made of chipboard, laminated chipboard, MDF with melamine edge.
Transformable coffee table
This table will fit perfectly into the design of any room and will save there is a lot of space, and if necessary it can easily turn from a coffee table into dining. The downside of the transformer is not easy assembly. Let's consider manufacturing such a table.
First you need to decide on mechanism on which the whole will be built assembly. Mechanisms domestic production cheaper, foreign ones are more expensive.
The design of the transformer comes with gas play and with springs.
Stages of work
Step 1. Purchase of a transformer mechanism.
Important! Mechanisms for the transformer are produced different types and sizes, so when choosing, you should take into account the dimensions of your future table.
Step 2. Using a modeling program we create layout table that's right for you. Suitable for this programs PRO100 or Sketch Up from Google: lightweight, intuitive, and easy to use. Creating a layout will take 2–3 hours.
Step 3. Uncover details The same can be done using the program. She calculates all the necessary materials, which greatly simplifies our work. Having received everything sizes, sawing the parts.
Step 4. Table assembly. Frame our table will be assembled using confirmations(ties for connecting parts from wood materials). To do this you need to do hole with a special drill. It is more convenient to make markings with a pencil or using ordinary stickers.
Step 5. Further, in accordance with the one attached to the transformer mechanism instructions We attach it to our frame. Before this you need to insert springs.
Fasten with simple end-to-end way due to the heavy weight of the mechanism.
Drilling holes for the bolts and use a special drill to drill places for the bolt heads.
Fastening transformer using bolts.
Step 6. We fasten in a similar way mechanism on the other side.
Step 7 We collect legs. The weight of our table is approx. 50 kg, therefore, it is necessary to fasten the table legs together with ordinary furniture zip ties.
Step 8 We will screw down our legs to the table frame. We make markings and drill holes.
Step 9 We screw all the legs to the frame. Legs hidden all working moments of the table.
Step 10 Manufacturing countertops. The tabletop is the most main part of the table. Choose durable ones hinges for the countertop. The size of the holes for the hinges is small. We screw in the hinges.
As a result, after screwing all the tabletops to the mechanism, you get this transforming coffee table:
Product finishing
Decorate a coffee table can be used in completely different ways. To add charm to the product, you can decorate it using the technique decoupage, decorate with shells and other unusual objects.
Ideas for decoration:
- Fat rope-rope along the edge as edging;
- Mosaic from various glass objects;
- painting on wood;
- Pasting with wooden pads;
- Craquelure (artificial aging table surface);
- Pasting with decorative mirrors;
- Veneering(pasting with decorative film).
For information on how to make a round coffee table from solid wood, see video:
Furniture making with my own hands- not only a way to save money, but also a fun activity. You can bring the most bold ideas, for example, create a coffee table. After all, this is not only stylish accent in the interior, but also a functional element of the room.
The procedure for making a table at home is as follows:
- We take a beam with a cross-section of 5x10 cm, cut it into three parts, several pieces each. For example: the length of the first part is 130 cm, it is necessary to cut 9 pieces of beams with this length. The length of the second part is 21 cm - 12 pieces. The length of the third part is 34 cm - 2 pieces. You can start by making a drawing of the table.
- The timber is placed in three rows. At this stage, you need to leave a small gap so that you can place the table legs there later.
- Remove two rows from the top. We begin to move the rest of the timber. This will give the table an original appearance. Then we make markings for the transverse parts.
- We lay the outer bars of the second row and put marks for the cuts. The cuts can be made with a hacksaw or saw. After which we secure the bars with screws.
- Let's move on to the third row. We shift the parts a little and secure them.
- Appeared under the tabletop empty seats. They are for feet.
- The table must be treated with a protective compound.
Original coffee tables
Every person wants to have an unusual table in their apartment so that it fits into the interior of the room and pleases the eye. This piece of furniture can be made from any material: wood, chipboard, drawers, etc. Let's look at several of these options.
Table made from waste paper
If there are old magazines and newspapers in the house, there is no need to rush to throw them away - perhaps they will serve you as material for the table. True, the interior design must be appropriate. By making furniture in this way, you can choose the table height you need and is comfortable for you. Process making a table from old newspapers and magazines height:
- We take waste paper and roll it into a tube, securing it with money rubber bands.
- We dilute the water-polymer emulsion. And put the rolled paper in it for 2-7 minutes.
- Then we dry the paper.
- We glue the bunch of cabinets with glue, you can use PVA. Dry it in a vertical position, securing it with thread in advance.
- We mark the strips and cut them.
- We glue the glass tabletop. The glass should be 12 mm thick.
Gallery: coffee table (25 photos)
Stylish table made of logs
This method is more complex in terms of execution than the previous one. The main elements for creating a table will be logs. It is taken as a basis wooden box, preferably on wheels. After which it must be furnished with logs. A homemade surface planer is also used for marking. After sawing off all unnecessary elements, there is no need to throw away the sawdust. It is better to collect them in any pallet. After this, the round pieces are glued to the surface. Sawdust must be mixed liquid nails. The mixture should resemble plasticine. Using a spatula, it is necessary to rub all the cracks between the rounds. Then, the product must be removed from all sawings and dirt, sanded and varnished.
DIY coffee table (video)
Creative curved table
Make a table like this It will be difficult on your own, but still possible. The main thing is to follow the manufacturing rules. For the design you need to take any type of wood. You choose the height yourself. The basis is taken from the property of wood, such as softening during dry heating. After which the form is saved. More details about production:
This table option is for those who love functionality and beauty in one item. With the help of simple manipulations he able to change height and appearance.
When assembled, it is a regular table for various waste paper. One has only to lift the two sides with legs, and it changes its usual size and turns into a dining room one.
Another transforming system is based on metal frames-pedestals. They are attached to the tabletop. In their usual position, that is, when assembled, they lie horizontally; if you change the size, the lid rises and rotates on hinges and becomes vertical.
When unfolded, the size of the structure is 73 cm. This height is acceptable for computer desk. Before making a transformer, you need to make a drawing.
DIY coffee table
To make a coffee table you need to take a sheet of chipboard. Its thickness is 16 mm. Make markings: find the center at the intersection of two diagonals. A nail is driven into the center, to which a thread and a pencil are tied. With its help you can draw a circle. If you want to make a table of a different shape, then draw the bends. After this, the shape is cut out using a jigsaw. The edges must be sanded.
The legs of the table are attached with screws. Paint the countertop itself in the color you want.
Table on wheels
If you have never made tables with your own hands, then you can try the simplest option. Let's consider making a model from chipboard. To make it you do not need a lot of knowledge and skills and expensive materials.
You can order cutting of laminated chipboard.
To make the structure you will need: a table top, planks, a shelf, a bottom, wheels, plastic corners, self-tapping screws, confirmations. When all necessary materials Yes, you can start assembling:
- First you need to make a shelf.
- Connect the tabletop and planks to plastic corners. The result is vertical slats to which you need to attach the shelf using a confirmant. To make her hold on tighter. the same must be done with the bottom.
- We attach the wheels using screws.
- At the very end, you need to seal the attachment points using self-adhesives.
As we have already found out, making a coffee table at home is not difficult. The article presents options that everyone can handle. Over time, you will be able to create the most original designs.
The height of a coffee table according to GOST should not exceed 50 cm, but no one forbids adjusting it to suit yourself. For example, the height of the transformer can be 73 cm. It is also worth noting that the table should fit your interior. Self-production Making such a piece of furniture is a fascinating process that will also save you money. A little imagination - and you already have an original product ready.
Coffee table - at first glance, not the most necessary furniture. Therefore, its acquisition is endlessly postponed.
But it is precisely such items that make the interior truly cozy and comfortable. Therefore, we are sharing ideas that will tell you how to make a stylish coffee table with your own hands and not go broke.
1. Democratic and accessible
Table made of boards and boxes.
To make such a table you will need a couple of metal or plastic boxes and two large boards. Don't forget to fasten the structure securely.
2. For the smartest
Elegant mini table.
Books with beautiful covers and small glass for the table top are all the materials for such a coffee table. The books must be glued together, and the glass can be fixed to them using silicone glue, which becomes transparent after drying.
3. Ordered chaos
Original do-it-yourself coffee table.
A coffee table made of flat elements fastened together in a chaotic manner is an idea that is easy to implement. Will fit wooden cuts, parts of boards, large books. 
Table made of wooden cuts.
4. Industrial style
An industrial cable reel can become a table.
A reel for industrial cables is a thing that cannot be found on every corner. But if you are lucky enough to become the owner of this item, it can be used to make an excellent coffee table. 
Functional coffee table.
5. Table for car enthusiasts
Reliable tire table.
Coffee table from car tire will last long years. But it is advisable to use the tire without damage. All that remains is to paint it, secure the tabletop and legs.
6. Wooden table almost free
You can make a coffee table with your own hands from pallets.
Ordinary pallets, which can be purchased for pennies, are an excellent material for making furniture. A little imagination, and the wooden coffee table is ready.
7. Second life for old boxes
Large drawers are the basis for a coffee table.
Another way to become the owner of a coffee table from natural wood- this is to use old boxes as material for its manufacture. Four large drawers fastened together form a stylish desk.
8. Extravagant chic
Asymmetrical coffee table.
A coffee table with asymmetrical legs looks especially original, but at the same time luxurious. The tabletop is made of a thick board or a wooden cut.
9. From the dacha to the living room
Barrel table.
Big wooden barrel Easily converts into a coffee table. It must be cut into two parts, and then the table top and legs must be attached to one of them.
10. Spacious and functional table out of the box
Functional table out of the box.
A utility box made of plastic or wood can also be used as a coffee table. To make the table mobile, you can attach small wheels to its bottom.
11. Warm table
Furniture made of metal radiator.
Old heating radiator – solid foundation, which will help you make a coffee table with your own hands. You just need to paint it the desired color, attach the wheels and put thick glass on top.
12. From the interior door
An old door can also come in handy.
An interior door that has served its purpose becomes a material for making a coffee table with your own hands. It must be cut into several parts and fastened together.
13. If it’s a pity to quit and it’s hard to carry
Coffee table from a suitcase.
An old suitcase can become an original tabletop for a coffee table. You just need to attach the legs to it.
14. Brutal elegance
Original legs made of pipes.
An affordable option for making legs for a coffee table is ordinary plastic or metal pipes, connected to each other by fittings. This furniture will fit perfectly into a loft-style interior.
15. From ordinary wooden beams
Wooden table made of timber.
A wooden beam, folded in a checkerboard pattern, will become a tabletop for a homemade coffee table. The legs can be made from thick metal wire.
