regions from different materials– thresholds for laminate flooring are used. Such flooring popular, has good performance characteristics, at correct installation- serves for a long time. Correctly selected and installed thresholds will allow you to get a floor that is attractive in all respects.
Why is this necessary?
Thresholds solve a whole range of problems that arise when laying laminate flooring. For example:
- when the entire apartment is decorated, the laminate flooring between rooms may vary slightly in level. A threshold on the laminate between rooms solves this problem;
- the flooring cannot end in a clear, neat line. Laminate end thresholds allow you to achieve an aesthetic appearance of the edge of the covering;
- When decorating a room, the task of joining different types of coatings may arise. Flexible thresholds connecting tiles and laminate, for example, allow you to design the transition of coverings beautifully and neatly and hide the gap.
Connecting elements are required in the area of doorways, on stairs, near the wall, as well as on the connecting lines of individual areas of coatings. Depending on the tasks, you need to choose one or another class of laminate threshold.
One of the most important tasks that a laminate threshold solves is protecting the coating from damage. If the upper plane of the flooring is protected from moisture, a similar situation is observed in the area of the interlocking joints, then there is no protection at the edge of the covering. Installing thresholds on laminate flooring is necessary to prevent moisture and dirt from getting under the flooring.
What materials are used
When choosing thresholds between laminate and laminate or for other purposes, it is useful to know what such products are made of and what characteristics they have. Produced:
- metal products. Galvanized steel or aluminum alloys. This laminate threshold is strong, durable, and rigid. The ratio of price, quality and service life has made such products popular among consumers;
- Interior thresholds for rubber laminate flooring are also in demand. They prevent slipping; when the door rubs against them, visible marks are not formed, quality product lasts a long time. Installation of the threshold on the laminate is done different ways, the use of adhesives is allowed. The rubber elements are flexible, but at the same time quite durable, available with a smooth and corrugated surface, in different colors;
- wood products are classified as exclusive solutions. They do not show record service life, but are quite popular among a certain audience of buyers. Made to order, such thresholds for laminate flooring with hidden fastenings allow you to achieve high style and show the taste of homeowners;
- the cork threshold between the laminate and other covering is also an exclusive class product. Such design elements are flexible enough to design a curved seam line;
- the most inexpensive but rarely used format is plastic. Concealed laminate thresholds made from this type of material cannot provide sufficient rigidity to make the surface look aesthetically pleasing. Similarly, if you install a threshold at a junction with different heights, bends and zones of the element moving away from the surface will quickly appear. However, as a temporary solution, plastic products look rational.
The listed types of products have been used for a long time and are designed for all types of coatings. If we're talking about When working with modern flooring, you can use a laminate threshold. Made from the same material as the coating, it guarantees the same feeling of temperature and seamless transition (you can choose a product with a coating that exactly matches the design of the floor).
Threshold installation technologies
When deciding how to install the threshold, you have two options to choose from. There is a fastening scheme when screws or other structural elements are visible and open. Much more popular is the threshold for laminate flooring with hidden fastening. It looks more aesthetically pleasing, and you can choose the mounting option that is most suitable for the existing situation.
Thresholds for various types of coatings open type easier to install. However, this scheme has several disadvantages. In particular, if you install interior threshold between laminate and tiles, with at different levels coatings - it is difficult to achieve the same level of immersion of fasteners. This greatly disrupts the aesthetics of the surface, which is especially noticeable on plastic products.
Thresholds for laminate flooring with hidden fastenings come in different varieties. Several installation schemes are also provided, using special fasteners.
- The simplest option for installing a threshold on the joint line or end line of a laminate flooring is to glue the element. Specially shaped products are designed for this type of work. A similar montage shows good results when connecting different coatings along a curve. The disadvantage of the technology is that the joint cannot be disassembled without damaging the laminate board.
- The most common method for installing thresholds on laminate flooring is to use self-tapping screws and a special connecting element. The latter has a flat surface, and at the bottom there is a slot for fixation. The technology for installing such thresholds for laminate flooring with hidden fastening is simple: recesses are drilled in the base, plugs are placed, and screws are tightened so that their heads are at the same level. After this, it is enough to put on the connecting element, previously cut to the required length, with one side of the slot and, slightly bending the part, snap it onto the screws.
- An expensive and painstaking method for installing thresholds for laminate flooring with hidden fastenings involves the use of special connecting strips. They are cut to the required length, fixed in the area of the joining line, after which a decorative element is put on them. The disadvantage of this method of work is the need to operate in very cramped conditions.
The listed installation schemes are used when thresholds for laminate flooring are installed between rooms and other joint lines of relatively short length are drawn up. If it is necessary to decorate a complex line, in which there are both straight and curved sections, a mixed method is used. It consists of combining schemes in separate areas for laying the threshold, using both fasteners and adhesive compositions.
Video on how to install, screw and glue laminate thresholds:
Division of products by functional purpose
Having considered how to install a threshold on laminate flooring, it is worth dwelling on their varieties. In each specific case, separate types of connecting products are used.
- A straight threshold is designed to create a line along which coverings of the same height meet. It could be laminate different rooms, connection with tiles. It is recommended to use straight thresholds for coverings made of hard materials.
- Transition elements will be needed if you need to design the joint line of deckings that have different heights. This type of threshold can compensate for differences from 3 to 20 mm. It is often used to design the transition between solid and soft coverings. The connecting element is capable of exerting mechanical pressure on one side.
- End caps or cappings serve to protect the edge of the laminate. They have a shape that involves putting them on a board and then fastening them. This design element is often located near the doors, on the edge of the podium structures.
One part of the answer to the question of how to make a laminate threshold near a balcony door is to use special corner joining elements. They are also used in the design of stairs. Such thresholds are available in two formats: for external and internal corners. It is rational to use rubber elements. They are able to dampen mechanical loads and apply pressure, and also prevent slipping, being located on outer corner steps or edge of a threshold.
The beauty and durability of the coating will depend on the correct choice of such a functional element as the docking threshold. Don't skimp on your purchase. It is recommended to select separate classes of products for the design of straight and curved joining zones. Also, the thresholds look more attractive and aesthetically pleasing hidden installation. They allow you to create an almost invisible, stylish, beautiful joint.
The main question that arises when choosing several floor coverings is how to install the threshold between the tiles and the laminate. Laminate is a very popular and popular type flooring. It can be used in almost every room. However, in some rooms, for example, in kitchens and hallways, installing laminate flooring is not the most rational decision. Ceramic tiles are best suited there. The designers found interesting solution– part of the room is covered with laminate, the second part with tiles.
What types of thresholds are there - straight or transitional?
If you install such an interesting design as a threshold, you can hide the joint between different coatings, compensate for height differences and create an original transition from one surface to another. Today, there are a huge number of different thresholds connecting laminate and tile. They differ in shape, connecting seam, material, and cost. Depending on the functional purpose, the following categories of thresholds are distinguished:
- Direct. Thresholds of this type the best way suitable for, as well as for single-level linoleum connections. They can be used not only between different zones, but also between entire rooms.
- Transitional. Thresholds in this category are intended for connecting materials with relatively large height differences (up to 20 mm). Thanks to them, you can join tiles with laminate, linoleum or carpet.
- Final ones. They are used if it is necessary to cover the edge of one of the materials, for example, on a podium element or at the entrance to a balcony.
- Leveling. Today they are the most popular. Installing such thresholds will hide small differences in height between materials (from 3 to 5 mm).
Transitional thresholds deserve special attention, since, in turn, they are classified into several additional subtypes. There are corner ones that are used to connect different floor coverings: tiles and linoleum, tiles and laminate, laminate between rooms. Another type is round thresholds, in which the difference between surface levels reaches 20 mm. However, the most popular are considered flexible options complex shape. In addition to hiding height differences, they prevent water from flowing inside, and also look very stylish and beautiful.
Depending on the connection method, thresholds for laminate and tiles are:
- 1. Profile with through fixation. This is a special strip that covers the joint between the coverings and presses it to the floor. It is necessary to use countersunk screws as the main method of fastening. This profile can also be used if the cutting of fiberboards or ceramics is not done entirely accurately. To seal the edges of the plank, we recommend using silicone sealing adhesives.
- 2. H-shaped profile. to his appearance resembles the letter N laid on its side. The lower part of the profile is placed under installed panels, after which the tile is inserted into the opposite groove and impregnated with glue. As a rule, after this there is a small gap left, which is filled with a special tile solution and sealant from the laminate side. Silicone and acrylic compounds are also perfect for these purposes.
- 3. H-shaped collapsible profile. His distinctive feature- this is the presence of two T-shaped structures connected by legs. This structure is installed at the boundary of the rupture and fixes it. Upon completion of all installation operations, you will need to insert the decorative upper part into a special clip located at the bottom and snap it into place.
Structures covering the transition between different floor surfaces, are performed from various materials. When choosing a threshold, you should definitely take into account the basis on which it is made. After all, certain materials differ from each other in various parameters, including strength, reliability, and durability. The financial component also plays an important role.
Wooden thresholds are the most in demand and popular, including because they are very beautiful and environmentally friendly. To transition between ceramics and laminate, it is best to use wooden options. However, they require special care and are also quite finicky to use. In addition, they are not suitable for wavy joints.
Wooden thresholds are environmentally friendly
Relatively the new kind thresholds on construction market– plastic. Despite this, they are already extremely popular, mainly due to their ability to be used in wavy joints. They bend wonderfully and hold perfectly the required form, while preventing dirt and dust from entering the gap.
Metal thresholds are another very popular type of structure for hiding the transitions between laminate and tile. They are distinguished by greater strength, reliability and durability compared to other types. They fit perfectly into any interior and are able to emphasize strengths room design, as they are presented in a very wide range of colors. There are also multi-level planks on the market that will help hide the height differences between the laminate and tiles.
Aluminum thresholds belong to the most budget category. This type has found application in straight, even joints, whereas, naturally, it cannot be used in wavy joints. The process of installing aluminum thresholds is very simple even for beginners in this matter. The main thing is to drill several holes between the materials when installing tiles into which screws will be inserted. It is on these screws that the threshold will be attached. The process is as simple as possible and does not require time or money.
If it is necessary to make a wavy joint, we recommend that you turn your attention to flexible rubber thresholds. Structures made from rubber are easy to maintain and use; you just need to wipe them from time to time damp cloth so that the appearance never ceases to please you. They have found application in hallways and kitchens. This is an indispensable element for decorative design joints. The installation process is somewhat more complicated. However, with big problems you won't collide. Thus, flexible thresholds are installed at the stage of laying the floor covering. They must be cut in the same way as the joint. By installing them on Right place, use help construction hair dryer for heating and shaping rubber.
Installation features - what you need to know
There are two main ways general installation- open and hidden. The hidden method is more preferable due to its beautiful aesthetic appearance, since the fastening elements are hidden and not visible from the outside. However, the hidden method is much more complicated, so most often they resort to open installation.
Any threshold, with the exception of metal ones, consists of two profiles - working (lower) and decorative (upper). In the case of the open method, screws are inserted through the decorative layer. Naturally, the appearance suffers somewhat, and besides, the screws can be felt if you step on them with your foot. In some cases, they protrude quite strongly above the surface, which can cause damage to skin, clothing and even shoes. . Therefore, we recommend screwing in the screws as tightly as possible to avoid any problems.
If you decide to install laminate thresholds in an open way, you need to mark the holes, which will then be drilled. However, the first step is to prepare the subfloor, including removing the foam padding and laying down plywood or hard plastic. The installation of these materials is required to protect the plugs and screws used during assembly from loosening.
As you can see, the open method is not particularly difficult to install. In addition, the financial costs are also not the greatest. For this reason, most people hide transitions from one type of surface to another in this way. The disadvantages are obvious to the naked eye - not the most beautiful appearance due to the visible heads of the screws. In addition, there is destruction of the holes over time, especially if the threshold between the tiles and the laminate is constantly subjected to loads.
Hidden method - nuances during installation
Installing thresholds in this way avoids the presence of visible fastener parts. Therefore, in fact, the method is called hidden. The main advantage is the appearance, since self-tapping screws and other fasteners do not distract attention from the threshold itself and the transition between the laminate and tiles. A line is first drawn according to which the markings for the holes will be located. The distance between them does not matter, the only important thing is that they are on the same line.
Thresholds for laminate flooring with hidden fastenings look simply wonderful if the work is carried out with due attention and care. We install dowels into the prepared threshold from the end side, in which there is a groove allocated for this. After this, we combine the dowels with the plugs, which must be pre-installed. Using a wooden point and a hammer, carefully hammer the threshold inward. A very important moment, since an inaccurate or too strong blow can cause the threshold to bend.
There is a latch sill that is also installed in a hidden way. Its advantage lies in the simplicity and speed of execution of all installation work. To install it, you just need to lay the snap profile into the seam, and then cover it with a decorative element on top, fitting exactly into all the grooves. The price of such a threshold is slightly higher, but installation proceeds as quickly as possible and without unnecessary questions.
Corner connection - how not to damage the tiles
In some cases, it is necessary to install a corner for the laminate and ceramic tiles, for example, if it is necessary to install a seam between surfaces at different levels, the difference of which reaches 50 mm. However this method not very common. The reason is that the threshold is mounted along the edge of the tile. But given that ceramics is a rather fragile material, an impact drill or hammer drill can cause irreparable damage to the tiles. So corner thresholds are usually installed using silicone sealants and liquid nails.
Thus, there are a huge number of different thresholds between laminate and tiles, which differ from each other in the material from which they are made, texture, and colors. The installation process can be done by absolutely anyone. The main factor here is choosing the right threshold based on its shape, purpose, and installation method. Thresholds for laminate flooring perfectly protect joints from dirt and moisture, increasing the life of floor coverings, and also emphasize the design of the floor, decorating the premises and making them more beautiful and original.
IN modern renovation It is planned to arrange the floor using various floor coverings. For example, each room, if necessary, requires an individual approach and option for choosing flooring and covering.
There may be different rooms different coatings, in certain cases, the floor in the hallway and kitchen is made of tiles, and in some rooms laminate is chosen as the flooring material. Laying thresholds for laminate flooring is the last stage of finishing the floor. They perfectly cover all uneven surfaces and mounting surfaces; they will help define the boundary of the room.
Based on the fact that the covering in the rooms is different, a case of unequal levels arises, that is, in one of the rooms the floor level will be higher or lower.
If the junction of laminate and tile materials is not covered, and this looks completely unsightly. A good, high-quality threshold for laminate flooring, which has a varied appearance and method of attachment, will help with this problem.
Conditions for using thresholds for laminate flooring
For a long service life of the floor covering, you need to properly care for the coating and thresholds. Caring for the thresholds is completely simple. They are not at all afraid of water, moisture and detergents. The main thing during installation is to do everything carefully so as not to damage or break them.
Purpose of thresholds for laminate
Convenient and constructive thresholds for laminate flooring are used at the final stages of installation of floor coverings. First of all, these elements have an important function:
- They reliably serve to cover the edges, thereby providing safety for family and friends.
- The possibilities of the threshold are provided in creating an aesthetic completion of a single covering.
- The threshold has a warning function and protects the floor from dirt and water, which without this element could get under the laminate flooring. It is important to understand that if debris or water gets under the laminate, there is a risk of damage and ultimately the material becomes unusable.
- Using a threshold, you can hide unevenness in the laminate that formed during the installation process.
Types of thresholds for laminate transitional thresholds
Their main purpose is as an addition to the connection of coatings. In turn, the coating is located at different heights. The height can vary from three millimeters to 20 millimeters.
Helpful information ! Thresholds of this type are used only when it is necessary to connect tiles and laminate together.
In addition, this application is necessary for joining these materials with carpet or linoleum, as well as tiles. Straight thresholds
Such thresholds are intended for the design and joining of floor coverings located at the same height. For example, in the case in which they connect different types laminate between the room and the corridor, the basis is that the level of the connected materials should form one plane.
Corner threshold for laminate
A threshold for a laminate of this type is often called a staircase threshold. It is used in cases where it is necessary to fix the edges of the floor covering in the areas of steps. These types of thresholds are made of rubber; this will prevent the sole from sliding off steps and thresholds.
Final thresholds
Such thresholds are used when it is necessary to overlap the edges of one covering on the floor of two, which have different height levels. They are also used to decorate raised edges of floors and thresholds, balconies, and hallways.
What are the types of laminate thresholds?
The difference between the thresholds and each other lies in color, size, materials of manufacture, and methods of fastening. Thresholds are attached using two methods: open and closed.
Open way simpler, but not with an aesthetic appearance due to the fact that the screws with which the thresholds are attached are visible. With the second option, the thresholds are mounted much more beautifully, and they are also often used.
Thresholds are made from different materials:
- Wooden thresholds. They are the most harmonious. They are mounted using mounting rails. A wonderful option for laminate flooring is wood. But still, you will have to sand it and varnish it.
- Metal thresholds. The most durable. They have gained popularity due to their reasonable price. Such thresholds are made of aluminum, steel, brass, and are used more often. From the outside they are covered with gold, silver and wood.
- Cork thresholds. The price is the same as for wooden ones - these are very flexible thresholds for laminate flooring. It is this quality that gives them the ability to quickly take the desired shape.
- Plastic thresholds are the cheapest thresholds, their quality corresponds to the price. You should not think that such a product will last long.
- Quite often, a laminate coating is combined with an MDF profile. This product is a cheap one, the main disadvantage is its susceptibility to moisture.
Selection of thresholds for laminate
Correct selection The threshold for laminate flooring is determined by assessments of many factors, among which it would be unreasonable to underestimate the importance of the functional purposes of the premises. Since the threshold will be between the tiles and the laminate, it will be greatly affected by moisture.
Eg, the threshold between the laminate and the tiles is very important protection from moisture. In this regard, the material from which it is made must be high quality and resistant to moisture.
The threshold that separates the tiles and the laminate must be able to level out differences in height due to the fact that the difference in flooring levels cannot be predicted in advance. If we take into account the dimensions of thresholds for Quick Step laminate, their selection will depend on the space in which these products will be used.
Nowadays it has gained great popularity flexible threshold for laminate, it is made in the form of a roll. These thresholds are perfect for finishing surfaces that have a curved shape.
Installation and its features
In all cases, thresholds are used in places where rooms meet, since it is often not always possible to maintain identically oriented laminate panels throughout the house. During installation, the threshold is cut to length. This length, together with the distance between the baseboards, must be the same.
note! The threshold is mounted flush with the surface of the baseboard.
Even the existing difference between the tiles and the laminate of no more than five millimeters will be perfectly hidden thanks to the wide threshold. And also two planes with different levels can be connected to each other.
Conditions for the right choice
- When choosing a threshold for laminate flooring, pay attention to the color, material and surface texture. Also take a closer look at the strength, moisture resistance, and intended purpose of the product.
- Select the color depending on the coating being joined or on matching the decorative elements.
- Follow pricing policy when purchasing the used threshold and floor covering. Don't complement expensive coating plastic, its cost is very small and it is of poor quality.
There you are good advice : Select thresholds only after you have decided on the floor covering, its color, and material.
Installing thresholds is not at all difficult; you can easily do it with my own hands. It only requires you to carry out the work sequentially; the video instructions, as well as the photographs that we have provided you, can help you with this. The main thing before choosing a threshold is to decide on the choice of flooring - this is the most important thing. The choice and decision to carry out work depends only on you.
In any case, you will succeed, the main thing is to act correctly and confidently. Good luck with your work!
