Premium German brand on the Russian market since 1995. With us you get the real thing German quality from a company with 48 years of history around the world.
- ALL profile systems top class "A"
- ALL are made frost-resistant and marked with the letter “M”
- ALL have maximum 4-sided steel reinforcement
- Uniform quality standard regardless of country of production
The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.
The wider the profile and the greater the installation depth, the higher the thermal insulation.
Profiles ONLY of the highest class “A”
According to the thickness of the internal walls, ALL of our profiles are of the highest class “A” - the thickness of their front wall is at least 3 mm.
- class “A”: front wall not less than 3.0 mm
- class “B”: front wall not less than 2.5 mm
- class “C”: wall thickness is not standardized
Please note that 80-90% of the Russian market are classes “B” and “C” and only 10-20% are class “A” profiles. At the same time, in our assortment VEKA profiles Class "A" ONLY.
We fundamentally DO NOT use profile systems of classes “B” and “C” (with a front wall width of less than 3.0 mm).
ONLY frost-resistant profiles
According to GOST 30673-99 “PVC profiles for window and door units” for resistance to climatic influences, ALL of our profiles are “frost-resistant” - for areas with an AVERAGE monthly air temperature in January BELOW minus 20°C.
GOST standards for different classes:
- normal version “N”: the average temperature in January is minus 20°C and above
- frost-resistant version “M”: the average temperature in January is lower than minus 20°C
Our assortment includes ONLY frost-resistant profile systems marked with the letter “M”.
Heat transfer resistance (thermal thermal resistance) is the main thermal insulation coefficient. Determined by the ratio of the temperature difference between outside and inside the room to heat flow passing through the window. The higher this number, the better efficiency thermal insulation.
Evolutionary double-glazed windows SmartGlass 2.0
Our multifunctional double-glazed windows work for you both in winter and summer. In winter, spraying silver particles retains up to 90% of thermal energy heating devices, and in summer the double-glazed window reflects 25% more solar heat than conventional plastic windows.
- by 42% more HEAT in winter (energy saving properties)
- 25% less HEAT in summer (sun protection properties)
All our double-glazed windows contain special energy-efficient glass. We DO NOT use regular glass even in the most basic configurations.
AirDrive I, II and III climate control systems
Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode. These are NOT external devices (combs or valves), but BUILT-IN ventilation fittings.
Three options:
- AirDrive I: slot ventilation (1 mode)
- AirDrive II: discrete multi-stage ventilation (3 modes)
- AirDrive III: discrete multi-stage ventilation (5 modes)
We try not to place combs based on their appearance (only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).
The German brand KBE is a leader on the Russian market of manufacturers and suppliers of high-tech plastic profile for window and door systems.
One of best products modern construction market, the KBE brand, can rightfully be proud of the history of its development, which began in 1980 in Berlin. As a pioneer in the field of high-performance extrusion, KBE as soon as possible has taken a leading position in the PVC profile market both in Germany and throughout Europe.
In 1995, the KBE profile brand appeared on the Russian market. Popularity of the KBE profile among Russian manufacturers window systems determined the decision to create production in Russia. Currently, there are two factories operating in our country - in Voskresensk near Moscow and Khabarovsk. At the same time, KBE profile systems produced in Russia and Germany are absolutely identical, which is confirmed by Rosstroy.
In Russia, KBE brand profile systems are presented through branches in St. Petersburg, Rostov-on-Don, Samara, Yekaterinburg, Novosibirsk and Khabarovsk, each of which has an extensive dealer network in the regions. A well-functioning logistics system ensures compliance with agreed delivery times.
KBE Etalon
Classic plastic windows!
KBE Etalon is a classic profile system, the production technology of which has been “honed” to perfection. It has been represented on the Russian market for more than 15 years. During this time window companies We worked out all the nuances of the assembly from the KBE Etalon profile. That's why this system has become a classic of plastic windows!
Windows from the KBE Etalon profile can change your interior and add zest to a familiar environment. The classic look of plastic can be improved color design, since, along with the black KBE seal, the Etalon is produced with a co-extruded gray seal. It will give the windows a noble look and make the light opening visually larger.
Technical characteristics of KBE Standard:
- Installation width - 58 mm
- Frost resistance - up to -60°С
- Heat transfer resistance coefficient, m2°C/W - 0.71 (0.63 with reinforcing liners in the frame and sash)
- /grey
KBE Engine
An economical solution for glazing residential and office buildings!
KBE Engine – affordable alternative KBE Standard system, created by KBE designers in response to market demand for an affordable 58 mm system.
Brief technical characteristics of the KBE Engine system:
- Installation width - 58 mm
- Maximum glass thickness - 34 (50 using a rebate expander)) mm
- Number of chambers - frame 3 / 3 / impost 3
- Possibility of combination with a “wide frame” (solving the problem of “cold bridges” in cold types of walls) - Yes
- Frost resistance - up to -60 C
- Maximum sash size - 150 cm x 150 cm
- Maximum leaf size for balcony doors - 90 cm x 235 cm
- Removing the fitting groove - 9 mm
- Heat transfer resistance coefficient, m2°C/W - 0.7 (0.62 with reinforcing liners in the frame and sash)
- Tightness of sealing contours - corresponds to class A GOST 23166-99
- Durability (standard years) - more than 40 years
- The standard seal color is black.
- Greenline is environmentally friendly (lead-free!), recommended for use in children's and medical institutions
KBE Etalon+
The KBE Etalon+ system was developed on the basis of the best Western technologies, taking into account Russian climatic conditions. KBE_Etalon+ expands the main advantages of the KBE Etalon system. Thanks to the combination of KBE Etalon with a “wide frame” (installation depth 127 mm), the system receives additional advantages: a higher heat transfer resistance coefficient; reducing heat loss through the edges of the window opening in the wall.
Along with the advantages described above, KBE Etalon+ has other advantages of plastic windows made from the basic KBE Etalon system: excellent sound insulation, good thermal insulation properties, durability, environmental friendliness and ease of maintenance.
KBE SELECT 70 mm
More than just design!
KBE SELECT 70 mm is a premium system characterized by smooth lines and rounded contours. Meets the needs of the most demanding consumers with high demands on design. The SELECT system is produced only in Germany, which indicates its exclusivity.
Brief technical characteristics of the KBE SELECT 70 mm system:
- Installation width - 70 mm
- Number of chambers - frame 5 / 5 / impost 4
- Possibility of combination with a “wide frame” (solving the problem of “cold bridges” in cold types of walls) - Yes
- Frost resistance - up to - 60 C
- Maximum sash size - 150 cm x 150 cm
- Tightness of sealing contours - corresponds to class A GOST 23166-99
- Durability (standard years) - more than 40 years
- Heat transfer resistance coefficient, m2°C/W - 0.77 (with reinforcing liners in the frame and sash)
- The standard color of the seal is gray
- Greenline is environmentally friendly (lead-free!), recommended for use in children's and medical institutions
KBE Expert
Windows for maximum comfort!
KBE Expert is a modern profile system that meets high thermal insulation requirements. KBE Expert has an installation width of 70 mm, which allows you to make the installation seam 20% wider and better insulate it. The wide 5-chamber allows you to install a thicker one, which significantly increases the thermal insulation of the room. That is why window systems from the KBE Expert profile are called “Windows of Maximum Comfort”.
Brief technical characteristics of the KBE Expert system:
- Installation width - 70 mm
- Maximum glass thickness - 42 (58 using a rebate expander) mm
- Number of chambers - frame 5 / 5 / impost 4(3)
- Possibility of combination with a “wide frame” (solving the problem of “cold bridges” in cold types of walls) - Yes
- Frost resistance - up to -60°C
- Maximum sash size - 150 cm x 150 cm
- Maximum leaf size for balcony doors - 90 cm x 235 cm
- Removing the fitting groove - 13 mm
- Heat transfer resistance coefficient, m2°C/W - 0.76 (with reinforcing liners in the frame and sash)
- Impact strength, kJ/m2 - 39.5
- Tightness of sealing contours - corresponds to class A GOST 23166-99
- Durability (standard years) - more than 40 years
- The standard seal color is black.
- Greenline is environmentally friendly (lead-free!), recommended for use in children's and medical institutions
KBE Expert+
The KBE Expert+ system is developed on the basis of the best Western technologies, taking into account Russian climatic conditions. KBE Expert+ expands the main advantages of the KBE Expert system. Thanks to the combination of KBE Expert with a “wide frame” (installation depth 127 mm), the system receives additional advantages: a higher heat transfer resistance coefficient; reducing heat loss through the edges of the window opening in the wall.
Along with the advantages described above, KBE Expert+ has other advantages of plastic windows made using basic system KBE Expert: excellent sound insulation, good thermal insulation properties, durability, environmental friendliness and ease of maintenance.
KBEEnergy
A high-quality solution for glazing objects with special requirements for heat and sound insulation!
KBE Energy is a worthy alternative to the KBE Expert system. The three-chamber design of this system makes the KBE Energy profile more affordable. At the same time, the 70 mm platform allows you to install a thick two-chamber window and increase the width of the installation seam, which makes the window warmer overall.
Brief technical characteristics of the KBE Energy system:
- Installation width - 70 mm
- Maximum glass thickness - 42 (58 using a rebate expander) mm
- Number of chambers - frame 3 / 3 / impost 3
- Possibility of combination with a “wide frame” (solving the problem of “cold bridges” in cold types of walls) - Yes
- Frost resistance - up to -60 C
- Maximum sash size - 150 cm x 150 cm
- Maximum leaf size for balcony doors - 90 cm x 235 cm
- Removing the fitting groove - 13 mm
- Heat transfer resistance coefficient, m2°C/W - 0.75
- Tightness of sealing contours - corresponds to class A GOST 23166-99
- Durability (standard years) - more than 40 years
- The standard seal color is black.
- Greenline is environmentally friendly (lead-free!), recommended for use in children's and medical institutions
KBE 88 mm
The ideal solution for efficient energy saving
KBE 88 mm - the most modern plastic window system on the Russian market. Windows made from the 88 mm KBE profile are distinguished by their elegant appearance and high functionality, providing highest comfort with maximum efficiency, thermal insulation and environmental friendliness. The heat transfer resistance indicator of this PVC profile system already today meets the requirements of 2016 (1.0-1.05 m²°C/W), regulated by order of the Ministry of Regional Development of the Russian Federation No. 262 dated May 28, 2010.
Optimally suitable for replacing old plastic windows with new ones Ideally solves problems in the field of effective energy saving Embodies all the best that has been developed by KBE specialists in the field window technologies over the past 30 years. Made in Germany
Brief technical characteristics of the KBE 88 mm system:
- Installation width - 88 mm
- Maximum glass thickness - 52 mm
- Number of cameras - 6
- Possibility of combination with a “wide frame” (solving the problem of “cold bridges” in cold types of walls) - No
- Frost resistance - up to - 60 C
- Maximum sash size - 150 cm x 150 cm
- Maximum sash size balcony door- 90 cm x 235 cm
- Removing the fitting groove - 13 mm
- Tightness of sealing contours - corresponds to class A GOST 23166-99
- Durability (standard years) - more than 40 years
- Heat transfer resistance coefficient, m2°C/W - 1.04 (0.95 with reinforcing liners in the frame and sash)
- Impact strength, kJ/m2 - 44.2
- Greenline is environmentally friendly (lead-free!), recommended for use in children's and medical institutions
Information from the official website of the KBE company - www.kbe.ru
We bring to your attention Kbe Engine profile systems. Products from the German concern have earned wide popularity around the world due to their high reliability and durability. At the same time, such plastic windows retain their visual appeal and durability well, regardless of weather conditions, so they are well suited for our variable climate.
Description of the Kbe Engine model range
The Kbe Engine window became in modern world synonymous with high quality and durable profile. Products are manufactured in accordance with all European and domestic standards, which guarantees a long service life. Other benefits model range can be distinguished:
- Green Line production technology. Thus, Kbe Engine systems are distinguished by their increased environmental friendliness. During the manufacture of the profile, lead and zinc, as well as their combinations, are not used. Instead, windows contain calcium and zinc compounds. As a result, the models do not release toxic elements into the environment;
- excellent protection from the cold. The Kwe profile reaches a thickness of 58 mm. The three-chamber design perfectly protects against the penetration of moisture, dust and cold air, which significantly reduces the cost of heating a house or apartment. Thermal insulation indicators are maintained even when the temperature drops environment up to -60 degrees Celsius. This can also be achieved by one- and double-glazed windows, which come with the profile;
- high strength. The use of steel reinforcement technology makes it possible to increase the rigidity of windows. As a result, they will serve perfectly for a long period;
- light weight. Such structures are distinguished by their low mass, which makes them convenient option for installation. At the same time, the models are characterized by good repairability, so even if they are damaged, their functionality can be quickly restored.
Where can you purchase Kbe Engine systems at an affordable price?
You can order the production of such windows from our company. We will promptly produce structures that are ideally suited to your home according to its parameters. Among the reasons to cooperate with us are:
- high quality goods. We provide a quality guarantee for all our products, which allows you to be confident in their reliability and durability;
- constant promotions and discounts. With their help, you can save even more;
- prompt order fulfillment. The structure will be ready within 5 days after signing the contract;
- possibility of installing models in Moscow and the region.
To purchase Kbe Engine plastic windows, contact our specialist. He will advise you on any issue and then help you place your order.
One of the leaders among suppliers of plastic profiles in Russia is the German brand KBE. Expert reviews indicate that this is indeed one of the best manufacturing companies of modern glazing.
Recognized German quality window profiles Profine International Profile Group is backed by many years of experience in the window construction market. The history of the brand began in 1980, and today thousands of companies throughout Europe install windows from this manufacturer.
Popular KBE profile systems:
Plastic windows KBE Engine - savings through technology
Windows in the budget segment are currently the most in demand in Russia. The KBE Engine window profile belongs to this category.
we will call you back
Windows from this profile showed excellent performance when installed:
- in apartments of houses of various series
- in government agencies
- at manufacturing plants
- at retail outlets
It's all about the efficiency, reliability and unpretentiousness of the profile of this series.
Technical characteristics of the KBE Engine profile
- Installation depth is 58 mm, which fully satisfies Russian building standards
- Maximum glass thickness in standard version- 34 mm, and using a fold expander - 50 mm
- The profile has three chambers, but their geometry provides very good thermal insulation
- In order to get rid of “cold bridges” with cold walls, the standard Engine profile can be combined with a wide frame
- The strength of the profile allows it to be used to make windows with maximum size sashes 150×150 cm. This will help in large windows solve the problem of excess partitions that reduce the illumination of the room and not in better side changing appearance windows
- The maximum size of a balcony door made from the KBE Engine profile is 90×235 cm, which is suitable for rooms with high ceilings
- The tightness of the sealing contours is tested at temperatures down to -45°C and corresponds to class A
Considering the high coefficient of resistance to heat transfer and the service life of the profile for more than 40 years, it is recommended to use it for windows of medical, preventive and children's institutions.
This is all the more justified since the KBE Engine profile is made without lead and does not pose a health hazard.
KBE products - catalog of optimal solutions
German brand KBE, supplying windows and doors to the Russian market highest quality, offers customers
- window components
- custom designs
- ready-made solutions for home renovation and building renovation
Various installation depths, energy-saving or other special double-glazed windows, varied and very precisely calculated fittings - all this allows you to select a design option for each individual customer.
Laminated windows KBE - a rich palette of colors for designer glazing
KVE Engine windows can be not only white. A whole palette of colors will allow you to make the design of the room and the facade of the building match almost any style.
In the production of colored profiles, lamination technology is used, in which a film having the desired shade or pattern is applied to white PVC in a special way.
we will call you back
In addition to rich natural colors (red, dark blue, dark green, etc.), KBE offers a whole line of wood shades. Windows with imitation oak veneer, walnut and valuable species wood look truly wooden and will add chic to your home or office.
Caring for PVC windows KBE
Plastic windows declared by the manufacturer for 40–50 years will last only with regular but simple care.
- In addition to washing the profile with soapy water, you must also monitor rubber seals. Be sure to clean them of dirt and dust at least twice a year and treat them with a silicone oil-based product (in the form of a pencil or spray)
- Periodically clean the drainage channels at the bottom of the frame - this will improve the waterproofing of the windows
- Regularly lubricate the fittings with resin- and acid-free oil. Such products will take care of the moving elements of the fittings and at the same time will not violate the factory corrosion protection
PVC profile KBE: quality comes first
Ten years ago, the concern was the first among manufacturers PVC profiles brought to the market plastic produced using greenline technology. To stabilize it, a calcium-zinc compound is used instead of lead.
This allowed the company to make a huge leap in ensuring the safety of its products. At the same time, prices for KBE profiles are available to any buyer.
The KBE brand invests considerable resources in new developments and research in the field of quality assurance. The result is a product that, in some respects, exceeds the requirements of not only Russian, but also European standards.
Our company works from 9:00 to 22:00, seven days a week
The KBE window profile system is an affordable product developed by the Profine concern for Russian consumers.
The KBE Engine profile is made from resistant polyvinyl chloride, which is used to create metal-plastic windows.
The Engine system has established itself in the market as a high-quality product, not inferior to systems manufactured in Germany. PVC frame trademark KBE is used for glazing of non-residential and commercial, entertainment premises, for industrial, industrial buildings, warehouses.
Distinctive features of windows from the KBE Engine Greenline profile
Existing advantages of plastic windows KBE Engine took over for themselves. Also, the system under consideration has features that are inherent in the products of the Profine concern. Let's take a closer look at the features of windows:
Characteristics
KBE windows are divided into several models:
- 70 mm systems - Expert and Select;
- Engine profile;
- KBE 88 mm.
Let's look at the technical characteristics of the KBE frame, Engine model:
- width of the polyvinyl chloride frame (installation width) - 5.8 cm;
- external width of the profile wall - 0.028 cm;
- use is possible in the temperature range from +40 to - 40°C;
- maximum sash size - 110x150 cm;
- maximum dimensions for loggia and balcony doors are 240x90 cm;
- the level of tightness of the sealing contours corresponds to class A;
- the installation groove of the fittings is located at a distance of 0.9 cm from the edge of the frame;
- maximum thickness of the KBE Engine glass unit is 58-0.36 cm;
- Greenline technology used in production allows you to install plastic structures with this PVC frame in medical and children's institutions.
average cost
Let's consider minimum prices for the basic package (in Moscow):
- opening measuring 140*145 cm - average cost 7,000 rubles;
- opening size 140*180 cm - 9000 rubles;
- window for a balcony with a door 220*190 cm - 13,700 rub.
If the width of the window opening is more than 2 m, then give preference to a reinforced structure of 3 sashes. The design can be made in different options: 2 flaps on the sides - blind, central - opening or tilt-and-turn, central - blind, opening flaps on the sides.
The average cost of three-leaf structures starts from 13,900 rubles.
It should be taken into account that the turnkey installation of KBE windows, which includes the window structure, window sill, ebb and flow and finishing of slopes, delivery and installation, will cost the buyer more. An increase in price will entail a change in profile color, shape, installation of glass with tinting or energy-saving properties.
Choose a quality product, enjoy the peace, coziness, and comfort.
Calculate the exact cost of windows in the KBE engine profile in
