Contact spray adhesive. Fabric glue: varieties, home recipes, characteristics. Types and applications

Reading time: 6 minutes

How often do your clothes, bedding and other textiles get torn? No one is immune from such situations, so there is different variants their decisions. Of course, you can simply sew it up, but this is not always suitable. The hole may appear in a visible place where the seam will be very noticeable. This is where aerosol glue for fabric and other materials comes to the rescue. There are at least 5 varieties of such glue. Select the composition based on the material that needs to be glued.

The main difference between aerosol glue and other types is the principle of application. The adhesive components are contained in an aerosol can. Thanks to the spray bottle it is easy to apply and lay down even layer. The number of layers can be adjusted. Excellent for gluing materials in hard to reach places and large surfaces with different textures. This glue is airtight and provides an elastic connection.

Types and applications

Spray adhesive for fabric is used in different areas life, as it is easier to use and more reliable than double-sided tape. Based on durability and adhesion principle, two categories of glue can be distinguished:

For temporary bonding of surfaces. Applicable for finishing woven and paper products. Glues quickly and does not leave stains.
For long-term results. Strongly and permanently glues materials such as foil, film, plastic. Covers evenly thin layer, dries instantly and lasts a long time.

The most popular varieties:

Advantages

Aerosol adhesive has the following advantages:

Easy to use, as it does not require spatulas, brushes or other tools.
Fast drying. Thanks to this, long-term fixation of materials is not required.
Long shelf life due to the tightness of the aerosol can.
Economical to use, since the time and intensity of pressing can be adjusted.
Does not stain the materials being fastened.
Does not destroy acrylic coating.
Strength and durability.
Resistant to elevated temperatures, so you can glue even those places where it gets sunlight, for example, window frames.

How to use spray adhesive for fabric?

To obtain a good, long-lasting result, several conditions must be met.

To begin, clean off any dirt, wipe with a degreaser and dry the materials to be glued.
Work must be carried out in a well-ventilated area with room temperature. Next, you need to shake the can well and apply the spray to the material. To regulate the width of the jet, you need to take into account the type of surface: for dense and heavy materials a thicker layer is required, and for gluing thin ones, applying only one material is enough.

When spraying, the distance to the surface should be at least 20 cm. The time interval between applying two or more layers should be 10 minutes. It takes about 30 minutes for complete and final drying.
When the glue in the container runs out, you need to turn it upside down and squeeze out the remaining solution. After this, it is necessary to remove the empty can into a room with dim lighting.

While spraying, hold the can of glue parallel to the surface. So, the composition will be quickly and evenly distributed.

When working with such glue, it is important to know not only the rules of use, but also safety measures:

Do not use the aerosol after the expiration date. Expired adhesive may hold surfaces in place, but will not retain its original strength and durability. Sometimes expired spray does not dry out at all.
Store only away from sunlight and out of reach of children. Optimal temperature storage from +5 to +30°С. The expiration date is usually indicated on the packaging.
Do not smoke while working with aerosol glue. Use personal protective equipment. (gloves, bandages).
If the composition gets on parts of the body, immediately wash them with soap and wash your clothes.
Keep away from batteries. Separated from alkalis and acids. Remember that contact with an open flame may cause an explosive fire.
If the glue is not used for some time, close the lid tightly.

Manufacturers

When choosing, consider properties such as:

High temperature resistance.
The glue should not deform the material.
Resistant to detergents.
Possibility of repeated gluing while maintaining adhesiveness.
Transparent color, allowing the aerosol to be used on materials of any color.

Below are the most popular brands:

This is a transparent waterproof adhesive for fabric, wood and others, which is based on elastomers, and the role of a displacer is played by dimethyl ether. Resistant to water, but has low gasoline and oil resistance. Operates at temperatures from -29 to +99. If necessary, surfaces can be re-glued more than once. Does not leave stains or marks. The ZM line of adhesives also includes a universal polymer that can be used to fix metals, artificial fabrics, wood, plastics and much more.

A glue that has no analogues. He is able to fix everything and independently select the gluing strength: from very weak to the strongest. main feature glue from this company is that it is used for aircraft and shipbuilding (eliminates problems with noise insulation and acoustics). This glue works even on dusty surfaces, so it can be used when finishing works oh and for gluing decorative elements on concrete base.

The list of materials that Multi spray can glue is large: plastic, cardboard, metal, foil, rubber, tiles, plywood, stone, wood, cork, paper, and so on.

Universal aerosol waterproof varnish for fabric, paper, canvas, posters does not shrink. Used for fixing surfaces for decorative and artistic works, suitable for decoupage. Due to the absence of acids in the composition, it leaves no traces. Creates an even coating without creases when fixing thin materials. It is recommended to apply in several layers and avoid smudges during gluing.

Ghiant hobby colle permanent

Ghiant adhesive is designed for permanent fixation of lightweight fabrics and materials. Suitable for photo and regular paper, film, tracing paper, cardboard, foam. Most often used for decoupage and decoration.

Hobbi aerosol is sprayed in a thin, even layer without the formation of wrinkles or creases. Only needs to be applied to one surface.

Aerosol fabric adhesive has become widespread and popular, as evidenced by glowing reviews. Aerosol adhesive has gained such recognition due to its ease of use and relatively inexpensive cost. So, the cost of one can varies between 200-1000 rubles.

Popularity aerosol spray glue can only be compared with PVC glue, and this is associated with a number of advantages.

Universal compounds firmly adhere:

veneer,
concrete,
plywood,
textile,
metal,
plastic,
foil,
tiles,
stone,
paper,
cork,
cardboard,
tree,
felt.

Wherein:

easy to apply and does not require use additional tool in the form of spatulas, tampons and brushes,
penetrates into any, even hard-to-reach places, is evenly applied to complex surfaces,
you can adjust the spray width, saving material consumption,
has high heat resistance,
does not dry out for a long time during storage,
does not require long fixation during gluing,
you can adjust the position of the glued object until the glue sets,
is a worthy alternative to double-sided tape,
glues materials even to concrete screed.

Areas of use:

furniture manufacturing,
textile industry,
production of packaging materials, billboards, leather, fabrics, foam rubber,
Automotive industry,
renovation and decoration of premises,
small household work,
creativity, handicrafts.

VIDEO ON THE TOPIC

The procedure for using universal glue in an aerosol can:

the surface for gluing must be dried, degreased, cleaned of dirt,
work is carried out in a room at room temperature,
The can must be shaken well before use,
if the objects are light, it is enough to apply glue on one side, if the surface is porous, then on both,
Leave to dry completely for 30 minutes,
for the most dense adhesion, the glue is applied in two layers with an interval of five minutes,
The composition should be stored at a temperature from +5 to +30 degrees.

OUR CHOICE

one of the most popular compositions today. It is ideal for processing and mounting surfaces, does not leave marks, and can be used to repeatedly re-glue even complex materials. The glue jet is controlled with one finger press, while the other hand remains free. Does not require the use of jars, brushes or other additional tools.

Another popular composition - Abro aerosol glue, which glues surfaces in a few minutes. Does not lose its properties at temperatures from -23 to +93 degrees. Easily applied to hard-to-reach places, firmly bonds plastic, wood, laminate, polypropylene, polyethylene and light metals. The kit includes a nozzle for even application, and the sprayer operates in three modes – minimum, medium and maximum.

Use for fabric

Aerosol fabric adhesives allow you to bond cotton, felt, coconut fiber, textiles, jute and other materials. Thanks to its transparent composition, it is perfect for repairing clothes and effectively seals tears and punctures.

Used for edging carpets, attaching various details and appliqués to fabric.

Properties:

does not cause deformation of the material,
resistant to detergents,
not afraid of high temperatures.

Thanks to the special formula, it does not seep through the fabric, does not pill, and is convenient for fixing patterns and materials, as well as for sewing in a zipper. Glue consumption is very economical. Before use, shake the can well and spray at a distance of 30 cm.

Multi spray is another great option.

produced in England. This unique composition adheres well to various materials - from veneer and metal to foam rubber and cardboard. Acts quickly and glues firmly. Can be used for both permanent and temporary fastening different materials. Suitable for drapery and finishing work.

To get an effective result:

the surfaces to be bonded must be degreased,
remove dust and dirt.
It is better to work with safety glasses and also open the windows.
The container should be shaken well and held at a distance of 20 cm.
Apply the glue in an even layer and leave for 5-10 minutes.

For one surface, the exposure time is about 30 minutes, for two – about 2 hours.

You can use solvent to clean the nozzle on the cylinder.

Safety precautions when using spray adhesive:

provide good ventilation,
close the container during breaks,
store separately from alkalis and oxidizing agents, away from heating devices,
enjoy by individual means protection,
Wash soiled clothes thoroughly.

It is useful for applying drawings, and for finishing work - special compounds for working with plastic, paper, plastic.

Big choice brands and glue will allow you to choose the most best option for household and professional use.

High-tech and extremely convenient aerosol glue. This is an excellent option for fast and high-quality bonding of a wide variety of materials. It has economical consumption and high connection strength. The peculiarity of this glue lies in the method of its application by spraying, the same property is its main advantage.

Varieties and features

The unique formula of the aerosol glue allows the substance to be evenly distributed over the surface. It immediately begins its action and instantly glues materials together. Some species are resistant to high and low temperatures, humidity and chemical reagents. The ability to spray the glue is achieved due to the dichloroethane substance present in the composition.

Based on the time and mechanism of adhesion, the group of aerosol adhesives can be logically divided into 2 categories:

For temporary fastening of materials. This adhesive is used for fabric and paper, repair and decoration. Its advantages are that it leaves no residue and sets instantly.
In order to obtain permanent results. This adhesive composition is ideal for strong and long-term gluing of lightweight materials - plastic, foil, labels, films. The glue lays on a thin layer and is not noticeable on the surface, dries quickly and lasts a long time.

Aerosol adhesive firmly bonds different types materials among themselves, its consumption is economical, the can is convenient for storage and can be reused.

Aerosol adhesive has become widespread, due to the versatility of its composition and high adhesion rates. It is also important that, thanks to its special release form, it is easy to use and can be stored for a long time.

What it is?

Aerosol adhesive is a universal fixing composition suitable for gluing a large number of materials, including those of different textures. The composition demonstrates high adhesion, fast setting time, and ease of use. A special feature of this composition is its release form - it is sold in the form of a spray in cans. To apply glue to the surface, you do not need to have professional skills or purchase tools (brushes, rollers). The spray jet penetrates even hard-to-reach places, providing high-quality fixation. It is also important that thanks to the dispenser and large spray coverage, it is ensured economical consumption glue. Even in open form Most formulations do not dry for more than 12 months.

This composition is suitable for paper and fabrics, polyethylene, foil, polystyrene foam products, for metal and plastic bases (which allows it to be used in short-term automotive repairs), for wood (used for furniture repair), for rubber, artificial and natural leather. In addition, the glue reliably connects ceramics and glass. The wide scope of application is due not only to the characteristics of the composition, but also to the colorlessness of the glue. When dry, it forms a transparent layer, does not leave stains or streaks, does not cause warping of materials - the joints remain invisible. This glue can replace double sided tape. It is widely used in repair work, in everyday life and at work, and is also extremely popular among motorists, because it fixes almost all the details of the interior, dries quickly, and the small volume of the bottle fits even in the glove compartment.

Properties and composition

In many ways, the composition of aerosol adhesive is similar to the composition of adhesive mixtures for certain surfaces, but in addition to them, it contains liquefied gas and other components that provide an aerosol form. A large number of aerosols have a rubber base combined with solvents. There are sprays on neoprene, butadiene styrene and polyurethane bases. The latter, in their principle of action, are somewhat similar to two-component compositions based on polyurethane foam with a hardener. Today on the market you can also find odorless aerosols with an acrylic dispersed base. Regardless of the composition, all sprays demonstrate high adhesive strength and adhesion, rapid drying and sprayability. The addition of individual components increases certain characteristics of the composition, for example, providing it with increased moisture strength or frost resistance.

Kinds

Depending on exposure time Aerosol glue comes in the following types:

for short-term gluing - the composition is intended for temporary fixation of paper, fabric, used in repair work;
for long-term fixation – provides a longer and stronger connection of materials and parts, the subsequent dismantling of which becomes not always possible.

Depending on the material for which the glue is intended, the following types are distinguished:

for textiles and paper - usually these compounds produce a temporary effect, and after separating the materials they do not turn yellow or deteriorate;
for foil and film – provide both short-term and long-term fixation;
combining polypropylene materials with wood or metal - such compositions demonstrate increased adhesion;
compounds for rubber - they are characterized by the fact that they do not destroy the structure of the material;
aerosol for carpets, carpet;
spray for polystyrene foam - also does not harm the structure and integrity of the material;
compositions for plastic.

Finally, there are universal versions suitable for joining most types of materials in all conditions. To apply drawings, you should use a special glue for stencils. Before use, you need to make sure that the stencils themselves will not be printed or become wet under the influence of the spray. Universal contact glue can be produced in cylinders and cylinders. The modification in a can is convenient if you need to spray glue in hard-to-reach places. The cylinder is usually equipped with a hose and an applicator, so it is convenient to use for applying glue to large areas. Assembly adhesive in a cylinder can also be used to seal joints and crevices different surfaces made of concrete, plastic. For the same purposes, you can use a composition from a cylinder if it is equipped with a nozzle for more precise, less voluminous spraying.

Review of manufacturers

Only glue from a reputable manufacturer demonstrates high-quality fixation.

You should not expect the appearance of withered characteristics from the composition in an unnamed cylinder.

The trust of customers has been won by the waterproof adhesive spray “3M” based on elastomers and solvents, which ensures increased moisture resistance of the composition. However, the adhesive is not suitable for surfaces in contact with oils and gasoline-containing liquids. Suitable for use at temperatures from -30 to +100ºС. If necessary, you can re-glue the materials; the glue does not leave marks and does not cause deformations. The range of adhesives of this brand is quite wide and includes compositions specifically for metal, wood, plastic, polystyrene foam and rubber surfaces. Each cylinder has its own number, and different compositions may differ in spray intensity.

When super strong connections are required, Multi Spray is usually recommended. Evidence of the high adhesion of the composition can be considered that it is used even in aircraft and shipbuilding. The adhesive demonstrates high-quality adhesion even when applied to rough, dusty surfaces, so it can be used for fixing rubber bases to concrete ones. It is based on unique rubber components. The list of materials to be glued is very large.

Positive reviews also receives Abro glue. In addition to excellent technical characteristics, users note the presence of several replaceable nozzles in the kit - a thin “neck” for applying the composition to narrow surfaces and a standard aerosol. The glue dries quickly, but is not suitable for all materials, since some light ones may not “take”, while heavy ones glue almost everything. This glue has several varieties. First of all, it is a universal composition, but when applied to painted surfaces it can ruin them appearance, and specialized for specific types of bases.

For fabrics, including car interior trim, Tuskbond glue is useful. It bonds even very thin materials without forming a hard “backing” or stains. For the same purposes, you can also use the universal composition Done Deal.

Instructions for use

Apply glue only to clean, dry and grease-free surfaces. Otherwise, its adhesion is reduced. Before spraying the glue, shake the can vigorously several times. After this, remove the cap and direct it with a spray (the point from which the composition comes out) onto the surfaces to be glued. Correct distance to them - 20–40 cm. As a rule, the manufacturer indicates from what distance to spray.

The glue container must be held parallel to the surface being glued, which will ensure its uniform spraying. In order to increase the bonding strength, you can apply glue in two layers, and after fixing the materials or parts, press them for a few seconds. If light bases are being combined, it is enough to apply the spray in one layer to only one of them. When connecting heavy or porous surfaces, it is recommended to apply glue to each surface, and this can be done in two layers. A little trick will help you use glue until the very end without any residue. At the end of use, turn the bottle over and press the sprayer until air begins to come out of it.

If you are a wholesale buyer, please contact our consultants. If you buy fabric spray adhesive in quantities of 1 box or more, we will offer you a substantial discount.

For all materials

In our catalog you will find compositions that are compatible with a wide range of materials that are used as furniture upholstery. Here you can buy:

Adhesive for leatherette in aerosol.
Compositions that allow gluing natural fabrics.
Special aerosols that can be used to fix porous materials, including foam rubber.
Adhesives for hard materials - plastic, wood, rubber, laminate, leather, paper, etc.
Adhesives for synthetic fabrics.

In addition, there is a universal spray adhesive that can work effectively on a variety of woven and nonwoven materials. The purpose of each product from the catalog is indicated in the description.

Features of choosing glue in cans

Before you buy adhesive composition read the product description. It specifies the temperature at which the adhesive can be used, recommended materials, and application rules. Pay attention to parameters such as drying time and speed of complete adhesion. The faster the glue dries, the faster the surfaces glued with it can be used, but the more difficult it is to use.

If you have any questions about choosing an adhesive from our range or its price, you can ask our company consultants. To make a purchase and contact us, fill out the form on the website, adding the desired product to the “Cart”.