How to make a sconce with your own hands from scrap materials. DIY chandelier: manufacturing principles with photos DIY pendant lamp

In electrical goods stores there are all kinds of lamps - manufacturers go to all sorts of tricks so that every buyer finds exactly what suits him both in design and affordability. But a sconce created with your own hands still remains the most original functional decoration of the home.

Electricity and creativity

During production, installation and operation, electrical appliances require compliance with all rules prescribed by law, safety standards and the laws of physics. Therefore, if there is no special knowledge and skills to work with electrical appliances, then it is best for creativity to use the base from an old sconce, at least its electric filling. Collect Wall Light As they say, starting from scratch is possible only for those who understand the materials and tools for assembling such equipment, know the branch of physics called “electricity,” and know how to assemble electrical circuits that meet the requirements for household lighting devices. If all knowledge about this sphere of life comes down to a successfully forgotten physics course school curriculum, then it’s not worth the risk. It’s better to use that wall lamp that has been asking for the trash for several years. Different types of creativity and craftsmanship allow you to create sconces with your own hands. Photos of similar works are presented on this page. Therefore, the question of how to make a sconce with your own hands does not require a complex answer, you just need to use your imagination.

Lampshade for sconces - the essence of the lamp

Wall sconces perform an interesting functional task - lighting a small area of the room. They are located on the wall, and most often the light from the sconces falls down, slightly scattering to the sides. That is why wall lamps are popular for creating coziness in the bedroom, in the kitchen, above the table where the whole family gathers, near a seating area with an armchair or sofa. Such a local lighting device can have any design in any style - from eco-style to high-tech. Only the interior of the room decides what the sconce lamp will be like. Therefore, for man-made wall lighting you can use the most different materials. The only condition is that they must be resistant to sufficient high temperature light bulbs in operation. Although, thanks to modern LED lighting devices, this question disappears by itself - the LED light bulb during operation heats up to 64 degrees in the lower part, where the necessary elements of the lamp are located. The flask itself heats up to approximately 33-34 degrees, i.e. You can easily hold it in your hands. That is why LED bulbs allow you to use almost any material for the lampshade. Having decided to make a sconce with your own hands, you can turn to materials in available sources or printed publications, to choose suitable option and for your creativity.

Threads and weaving are a suitable basis for creativity

Different types thread weaving: macrame, tatting, knitting, crocheting, fork - are actively used by needlewomen to decorate the interior of their home. Creating a lace sconce with your own hands is not a problem for a craftswoman; you just need to find a suitable pattern or develop it yourself. When preparing for work, you should first think about the base of the lampshade. Will the lace be stretched or will it hang down, what shape is the lampshade and how to place the lace on it: following the pattern, or will it be abstract, or undemanding to the clear correspondence of each rapport. Lace will look very elegant on a rounded lampshade classic shape. And for a non-trivial solution for a DIY sconce lamp, lace may be appropriate. For example, for a high-tech style you can use lurex or metallic threads. But even those who don’t know how to knit can make a lace bra with their own hands using ready-made lace. Measure the area of the frame for the lampshade and buy required amount material you like with a reserve for any shortcomings or unforeseen circumstances in the work - and an interesting, unusual lamp will decorate the room. In general, threads always make beautiful lamps. Even chaos created from textiles can be presented in an unusual way, for example, by winding threads around balloon, having previously coated them with PVA glue. When the threads are dry, the ball must be carefully deflated by piercing it with a needle. The resulting cobweb sphere is used as a lampshade.

Wood and light

Wooden objects look very original in any interior. Natural wood beautiful - with its own pattern, shades and color transitions. Using the natural bends of the branches, you can get interesting items and their details. How to make a sconce from wood with your own hands? Several options can be used. For example, you can take special blanks that are sold in craft stores. They are assembled or glued together to form a lampshade for the lamp. You can try to make an unusual sconce from the most ordinary twigs collected during a walk in the park. Wash small, 1.5-2.5 centimeter long branches, remove dirt, and dry. Then inflate an ordinary balloon and stick twigs onto it in a chaotic manner, using glue that does not destroy the rubber of the balloon, for example construction PVA. When the twigs have a good grip, the ball needs to be pierced with a needle, it will deflate and separate from the resulting ball of twigs. The lampshade, if necessary, is coated with furniture varnish. The only thing is that you will need to prepare a base on which the lampshade of the resulting diameter is attached. You can make a lamp for the wall with your own hands from unusual wooden parts. For example, by dismantling wooden clothespins for parts. They are assembled together so that they form a circle, gluing them to the base and to each other. Each half of the clothespin has an interesting shape with recesses that are simply ideal for a jute cord or decorative braid, chain, or any other material that is most appropriate for a specific interior solution. You can also use colored pencils - creating a chaotic lamp ball or gluing them into a slender circle or semicircle to form a lampshade.

DIY sconces made from dishes?

Craftsmen will come up with anything they can to create something interesting. For example, they use disposable plastic dishes- waste cheap material - for creating interior items, including sconces, with your own hands. Plastic spoons, having cut off their cuttings, are collected in the shape of a flower, gluing them together in circles and in rows. Disposable forks, also without stems, are assembled like a construction set using teeth into a sphere for the lampshade. The plates are bent to form two semicircles and also fastened together. This is an interesting DIY sconce solution that is actively used in decorative arts.

You don't have to throw it away!

Unusual wall lamps are made from tin cans. The cans themselves already represent a rigid shape that can easily fit a lampshade. You just need to decorate it. This can be done this way - draw a pattern on the jar like a dot painting and use a nail and a hammer to punch holes according to the pattern. To prevent the jar from being dented when a hammer is used on it, you need to place a block of wood inside it. The pattern must be constructed carefully, and the distances between the holes must be the same. When the drawing is completed, the jar needs to be painted.

An unusual do-it-yourself sconce is made from ordinary ones plastic bottles. They are different color, are easily cut with scissors and melted with a candle. Figures (flowers, butterflies, ribbons) are cut out of plastic, melted, giving them shape, and then using glue they are attached to a base from the same bottle or to an old glass lampshade. By the way, lost appearance a glass lampshade can be decorated in any way and give it a second life.

"Delicious" DIY sconces

A lot of interesting things can be done using natural materials. For example, pumpkin. Yes, you can create magic yourself, without magic wand fairies, if you just want to do something with your own hands. And the pumpkin just begs to be put on the desktop. There are varieties of pumpkin that can only be eaten, and there are those that are not suitable for a tasty dish, but the hard shell serves as a unique creative material, for example, to create a sconce lamp with your own hands. The pumpkin is prepared for processing, and then pictures or a mandala design are cut out of it, whatever you want. Such a lampshade for a wall lamp will not only decorate your home on Halloween, but will also bring a smile on any other day.

As easy as pie

The simplest sconce lamp can be made from an ordinary box, for example, juice or milk. It’s good when the inside of such packaging is covered with a layer of metallized foil, which is ideal for creating a lamp. Such a box will make an original sconce if you cut out the walls and cover them with, say, parchment paper or lace fabric, or make plot pictures on the walls of the box. This lamp is suitable for a child’s room, because the child can come up with a picture, and the parents will help cut it out. Collaborative creativity will make the room more comfortable and the family more friendly.

If you want to do handicrafts, decorating your world, then there will always be materials for creativity and interesting solutions. You just need to want to create beauty with your own hands. Good luck!

Materials

The most suitable and available materials- this is paper and textile. They are easy to transform, each of us is familiar with them and can be found in everyone. home. Wonderful lamps are also obtained from threads or yarn. Naturally, glass can also be used for lampshades. At home, these are ordinary or unusual, with an interesting shape, jars or bottles. Particularly daring projects include plastic containers, coffee packaging, and plastic children's toys.

In addition, do not discard options such as rattan, bamboo and rubber. Both raw materials and a finished product can serve as the basis for a future product. For example, designers have become adept at creating delightful lampshades from beads, globes, parts of sets, mirror shards and even crumpled sheets of music! You just have to take a closer look at the objects around you...

Understanding how difficult it is to move from thought to action, much less to see in regular jar exquisite accessory, we have prepared several master classes for you. Following step by step instructions, you can easily make hand-made new things dear to your heart for any room in the house.

Ideas and their implementation

Since we have already mentioned the materials suitable for making lampshades and lampshades, let’s start with paper.

Lamp with butterflies

For work we will need:

white thin cardboard
thin twine or fishing line
glue gun
wire for frame
utility knife or scissors
round pliers

Advice! Before you start work, decide on the dimensions of the lampshade in finished form. In our example, the diameter is 30 cm, which means we need a piece of cardboard 90 cm long.

We make a frame. Cut a piece of wire 96-98 cm long. Roll the wire into a circle with a diameter of 30 cm and secure the ends with pliers.
We cut 3 hanging elements from twine or fishing line. We measure the length of the pieces based on the height at which you plan to hang the lamp. We tie them to the wire in three places, evenly distributing the load.
Draw butterflies on cardboard different sizes and cut them out.
We fold the cardboard, glue the joint with a strip of thick paper or staple it with a stapler.
We fix the upper part on the wire. For this you can use both glue and thin wire.
The places of joints and cuts can be decorated with butterflies remaining after cutting.
Look what an elegant lamp we have created. It will fit perfectly into both a children's room and a bedroom. You will see a special chic when you turn on the lamp and butterflies flutter along the walls.

Advice! Instead of butterflies, you can cut out snowflakes, stars or flowers. Decide for yourself what you like best.

60s style

If you ask our grandmothers, they will certainly remember floor lamps with lampshades in the form of an inverted bucket, tied with colored threads. We can do exactly the same thing with our own hands.

We will need:

frame for lampshade – 2 pcs.
decorative braid (3 colors, choose a combination to your liking)
scissors
crochet hook

Let's start production.

We tie the first braid to the lower ring of the lampshade, leaving a tail of at least 5 cm.

Pull it onto the top ring with outside, throw it over it and pull it through the inside of the lower ring. We alternate actions until the next sector of the frame begins.

We fasten the first braid and take a braid of a different color to work. We knit it to the next sector, not forgetting to leave a tail on the first knot.

We do the same with the third sector, filling it with the remaining braid.

We stretch the tails along the bottom of the lampshade using a crochet hook.

Now our lampshade from the distant 60s is ready, all that remains is to insert the socket and assemble the chandelier in any order.

Fringed braid

Another one original idea for a lampshade with your own hands, it is also connected with braid, but not single-layer, but with fringe. What do we need for this?

Prepare:

two metal hoops or an embroidery hoop
fringed braid
fishing line
acrylic paint, the same color as the braid
glue gun
scissors

Advice! Fringed braid can be purchased in stores that sell decor for curtains and furniture.

We paint the hoops or hoops with acrylic paint. If they are already covered with varnish or other paint, it is better to sand and clean them.
We wait until the paint is completely dry and make three marks on each ring of the lampshade, placing them at an equal distance from each other.
I cut three identical pieces of fishing line.
We tie them to the smaller ring of the lampshade, leaving the upper ends with a margin so that we can then tie them to the lamp cord.
We measure the length of the fringe, subtract 2 cm from it, and tie the fishing line to the second ring using the resulting length. This way we can get a cascade.
Heat the glue gun and carefully glue the braid along the bottom ring.
We do the same with the upper ring, pulling it out from the lower one.

Advice! Please note that the hot glue may melt the line, so be careful not to apply it directly to the line. Drop glue onto the paper, let it cool a little, and then apply it to the fishing line.

Lamps are not just a source of artificial lighting in the interior, but also important element decor, without which the composition looks incomplete. You can create bright accents by making a lampshade for a chandelier with your own hands, because it is not at all necessary to spend huge amounts of money on purchasing designer models. Read about the nuances of work in our article!

Where to begin?

When creating a lampshade with your own hands, keep in mind that using a regular incandescent lamp is not the best good idea. It is better to opt for energy-saving light bulbs that do not heat up so much and, accordingly, do not heat nearby parts, thereby ensuring safety. In addition, they are quite economical, which allows you to save money on electricity, and are also durable.

When choosing a material for a lampshade, focus on both aesthetic properties and specifications. Firstly, these must be environmentally friendly, preferably natural, bases that will not distribute unsafe substances with minimal heating.

Secondly, the lampshade should not collect a lot of dust: some surfaces, like fabric ones, are more prone to this than others. Choose an option that is easy to clean and easy to clean damp cloth. This does not apply to paper, but due to the cheapness and simplicity of the material, such a chandelier can always be replaced if necessary.

Thirdly, the chandelier should illuminate the room well without darkening it. However, for some interiors, dim lighting is more suitable: in a nursery, bedroom or living room for an intimate atmosphere. In such cases, you can show your imagination by making a lampshade that creates light patterns in the room. You, as the author, can implement any of your decisions - and this is probably the main advantage of homemade lampshades.

Selecting a lampshade to match the interior style

The chandelier can become bright accent in the interior or as an inconspicuous but important addition. With any choice, the lampshade should harmoniously match the style of the room.

Unfortunately, not every product can be created with your own hands. For example, classics are characterized by elegant crystal, glass or hardware, which you can’t make yourself. But there are other options.

Minimalism

A laconic and laconic composition of minimalism can easily be disrupted due to one extra detail, which will be especially noticeable in such an interior. Regardless of the type of room, simple geometric shapes, the absence of hanging elements, as well as a uniform color scheme that is included in the overall palette of the space will look appropriate here.

Metal ones work well frame structures, which slightly darken the light, or paper shades without decorative details.

Loft

This is where you can really go wild, in a loft interior, in which they will look organic homemade products from unusual materials. It’s not scary if the appearance of chandeliers reveals their non-manufacturing origin, because many details of this style highlight their imperfections as their main advantage.

For lampshades, you can even use familiar objects: transparent cans, metal utensils, frames made of thread or wire. If the ceiling height allows, then a long one would be an excellent option. hanging chandelier with a minimalist cap.

Scandinavian style

Despite its northern origin, this style of interior design looks very cozy and modern. Minimalistic in nature Scandinavian style prefers natural materials, as well as light, mostly white, colors.

There are many options for chandelier design - the style does not greatly limit the shape. But not everything can be created independently. Ball-shaped, airy models made of thread or paper are suitable.

Provence

Coming to us from distant French villages, Provence prefers the simple, cozy aesthetics of natural materials, floral patterns, and light shades. This is approximately what a lampshade for a chandelier should be like.

Products made of fabric or lace with a round shape look appropriate. With a small level of skill, you can decorate a glass dome with decoupage, thereby saving money - after all, despite its simplicity, authentic Provence involves significant costs in the arrangement.

Paper lamps

Despite the fact that paper is not considered the most reliable basis for lampshades, but the ease of working with it and its noticeable low cost made this material very attractive among handicrafts. In addition, with its help you can update your interior at least every month, creating new crafts.

Origami lampshades

Who wasn’t interested in origami as a child, designing little animals or complex modular paper products? Now you can use your skills for more practical purposes. However, even people who have encountered this activity for the first time can also easily master it and make origami lampshades for a chandelier with their own hands.

These are laconic designs of different geometric shapes that will fit perfectly into modern interior. It is not recommended to use very strong paper, as it does not transmit light well.

Figured products

However, fans are more various decor can create lampshades of a wide variety of shapes from paper. For example, surround the lamp with paper houses, butterflies or envelopes.

The appearance of such a lampshade also depends on the surface - plain, patterned, newspaper, and so on. By combining these materials, completely different effects can be achieved.

Chinese lanterns

If you have paper lanterns at home, do not rush to use them as an independent lamp, because this is an excellent basis for other experiments.

You can paste it over with anything you like, but to avoid homemade look— we suggest decorating the ball with small paper flakes or long “feathers” that will gracefully hang down to the bottom.

Lampshades made of threads

Various threads and ropes are an excellent base for a lampshade, which is suitable for creating an intimate atmosphere due to the darkening effect.

Graceful cocoon

A round lampshade made from randomly twisted threads looks very simple and at the same time stylish. To keep such material the required form, it is fixed with glue on hot-air balloon, which is delicately removed after finishing work.

Although the field for creativity here is small, you can always experiment with colors, weaving in several shades.

Knitted lampshade

This solution made from threads looks less chaotic. The main conditions for making it are the ability to knit or the presence of a grandmother who will kindly knit a napkin for you. The finished product must be placed on any base - metal carcass, transparent container, Chinese ball. Similarly with the first option, you can attach the lampshade to the balloon using glue.

Bottle lamps

Stylish chandeliers for rooms different types You can even create them from bottles. This includes both glass and plastic containers.

Glass bottles or jars

The principle of working with such a base is simple: choose the most beautiful one and hide the lamp in it. Elongated bottles or small jars can be used. It is necessary to make sure that the glass transmits the amount of light required for the room, and if there is not enough light, several sources can be used.

If the chandelier plays more decorative function, the bottle can be covered with acrylic paint or painting.

Plastic lampshades

Plastic bottles should not be used untouched. But it’s quite possible to make cheap parts from them for a homemade lampshade.

Luxurious (as far as this word is generally applicable to plastic) look chandeliers from the bottom of ordinary bottles, which are shaped like a flower. They are fastened together with wire for better fixation, creating a variety of compositions.

Another option is a 10-liter eggplant covered with plastic spoons, which are lined up in several rows, like scales. The design will transmit muted but uniform light, which will further decorate the product.

Lampshades made of metal elements

Enough unusual solutions Metal products are also offered for chandeliers. Fortunately, you don’t need to make them yourself, so you don’t need any special skills in working with metal. But a spectacular appearance is guaranteed in any case.

Kitchen appliances

Don't rush to throw away old spoons and forks - you will need them to create original design. By placing a dozen devices around the lamp, you will get an excellent lampshade for kitchen chandelier, which fits perfectly into the theme.

The same effect can be achieved by using, for example, a grater. In general, you can experiment with any devices, especially if your interior is decorated in a loft style. Just make sure that metal parts didn't get very hot.

Gear dome

If you want to add a little steampunk into your life, make a chandelier shade out of gears. They can be obtained by disassembling old bike, or buy at a flea market. But the result is definitely worth the effort!

We looked at the features of making lampshades for chandeliers with our own hands and the most popular solutions from various materials. But, of course, there are many more interesting options - as evidenced by our selection of photographs. Enjoy watching!

Lighting fixtures can not only dispel the darkness, but also give an unusual aura to your interior.

There are many various ideas, with which you can make a wall lamp or any other type of lamp with your own hands.

You yourself are capable of creating a masterpiece that cannot be found in any store.

Creating an extravagant chandelier

Very original item It is made from the simplest materials, most of which can be saved after a picnic. Lamps from various containers will look impressive.

To do this you will need:

oval plastic bottle with a capacity of 5 liters;
disposable spoons;
cable with socket and plug;
low power LED lamp;
pliers;
glue gun;
screwdriver;
stationery knife.

To avoid fire, use only LED bulbs!

Use a knife to carefully cut the bottom of the bottle, then remove the handles from all plastic spoons. Apply to the cut area a small amount of hot glue from a gun, glue them to the bottom of the container.

Approximately you will need about seventeen pieces. Place the next and remaining rows in a checkerboard pattern.

In order to hide the neck of the bottle, place ten to twelve spoons without handles on the glue so that they form a ring.

Pull the socket with the lamp and cable through the hole at the bottom of the bottle.

If you don’t want to make this part yourself, you can purchase it in any department of household goods - the wire, socket and plug are already connected together.

Make a hole in the lid for the cord by drilling it with a drill or a hot self-tapping screw. Screw on the lid and place the previously prepared ring of spoons on top. Exclusive LED lamp ready for use.

Some ideas for creating lampshades

It’s enough to simply create a lamp from scrap materials for your home or garden.

Idea N1

any hollow dish (this could be an old saucepan or flower pot);
wire;
polyurethane foam and gloves;
paint and brush;
sharp knife;
pliers.

Place the item taken as a basis upside down. Wind the wire around the product the way you want the lampshade to look, since all the turns copy its shape. Put on gloves and squeeze the foam onto the frame a little at a time until it completely covers the wire, leave to dry.

Then, using a knife, give the contours more evenness and paint them in any color. This option will be the best for a street lamp.

Idea N2 is a classic

thick wire;
pliers;
small bottle of water.

Note!

For making the top central element screw a coil of wire onto the bottle, then remove it and trim off the excess. The ends must be secured so that they form a ring, the diameter of which should allow the cartridge to pass through at the bottom, and prevent it from coming out at the top.

Next, you need to make a large outer ring from the wire. To secure it you will need four equal pieces of wire. Connect one edge of each to the small ring, and the other to the large ring. The upper part of the lamp is ready.

The largest will be the bottom circle of wire; it must be attached to the second top one, evenly placing five identical pieces of wire.

To decorate the frame, thread a wire through the second top ring, giving it a wavy shape, and wind it onto the base. Decorate the bottom ring in the same way.

Note!

When walking through the forest, take with you an interestingly shaped branch; it will make an excellent wooden lamp. Wash the branch and remove the bark from it with a knife, coat it with wood varnish. For good stability, screw the lamp to a heavy stand with self-tapping screws; wood can also serve as a stand.

A better option is an oak tree; find a broken branch and saw off a circle at least five centimeters thick from it. Varnish or paint it too.

Making a lampshade with children

There is an option for making a lampshade with children. For the frame you will need a canister or bottle with a capacity of five liters. You need to roll the paper strips into a tube, it is best to wrap them around a pencil or sushi stick, then glue the remaining edge with glue.

These blanks need to be glued to the frame in several layers so that there are no gaps. When the glue dries, the lampshade can be put on a table lamp or made ceiling lamp, which looks very unusual.

Experienced needlewomen can knit or crochet a lampshade, decorating it with crocheted flowers and ribbons.

To give the product the correct shape, you can use a starch solution or regular PVA glue. Look at the proposed photos of knitted lamps, how much tenderness and comfort they contain!

Note!

This article told you how to make a lamp with your own hands. Using the information received and your own imagination, you can now create an exclusive lighting fixture for any room.

DIY lamp photo

Decorating your home yourself favorite hobby many housewives, this article reveals how to make a lamp with your own hands. You can revive the interior of a living room, bedroom or hallway using improvised means, just by changing the shade of a chandelier, floor lamp or table lamp. Do-it-yourself lamp shades can be used not only in residential interiors, but also in cafes, pubs, and pizzerias.

Selection of materials and lamps for the lamp

Products made for children's rooms must be made from natural, non-toxic materials and painted with environmentally friendly paints.

When manufacturing, you should also remember fire safety Therefore, lampshades made of flammable materials made from paper, plastic, feathers or threads should only be used with lamps that have a low heating temperature.

You need to use LED or fluorescent lamps. They have a number of advantages:

long service life;
minimal heating of the base from the glass part;
the light has three shades: warm, cold, neutral.

In addition, such lamps are also called energy-saving; their only drawback is their high cost.

It is also advisable to have a specialist connect the wire to the socket. You should not try to perform this operation yourself, as this may lead to undesirable consequences. It is more convenient to decorate an existing lamp frame or make it from durable and not very heavy materials.

To create lamps they use following materials: scissors, mounting knife, fishing line, wire, pliers, hot gun, in some cases it can be replaced with super glue. They should be used by an adult; it is unacceptable to involve a child in gluing. Since in one case he will get a burn, and in another he may glue his fingers together or stick to the parts of the future product.

What can a lampshade be made from?

Many craftsmen make lamps from completely unnecessary materials:

made of plastic or glass bottles;
newspapers, thin or colored paper;
artificial or natural threads;
dried branches of unusual shape;
disposable spoons;
old disks.

Plastic lamp

From plastic containers You can easily create a homemade chandelier of different sizes.

For the base you need to take a 5 liter bottle. The bottom is cut off from it. Then circles with a diameter of 1.5 cm are drawn on the surface. They need to be cut out assembly knife or small scissors.
The bottom of the bottles for decoration is cut off and the entire surface is cut with scissors into strips 0.5 - 1 cm wide, then the workpiece is heated over a lit burner. When exposed to heat, the stripes will take on a chaotic appearance.
Then the blanks are inserted into a 5-liter container with holes, and with inside The lids are screwed on. Then a wire is threaded through the large neck and the lampshade is installed. For such a lampshade you need to use an energy-saving lamp.
In some interiors you can find a fancy lamp made on the basis of an ordinary hanger or straw hat. In general, limit the scope of imagination of both home craftsmen and professional designers can't do anything.

Glass bottle lampshade

Very interesting option homemade chandelier is made from glass bottles. They are used to decorate the halls of catering establishments. Also this a good option for the kitchen in a residential building or apartment. This can be a lampshade consisting of one or several bottles, the bottom of which is cut off. You can do this yourself, but it is better to use the services of a workshop where they cut glass and mirrors.

How to use thread

For a lampshade made of threads or ribbons you will need: a ready-made frame made of strong wire, threads of different colors, scissors, glue.

The frame consists of two rings connected to each other by metal pieces. You can make it yourself from strong wire.
One color or several shades of thread is required.
A thread is secured to the bottom, then it needs to be pulled through the top ring, lowered down and thrown through the bottom ring. You need to make sure that the thread is taut and the turns fit snugly against each other. As soon as the thread runs out, you need to attach the next piece to the bottom ring.
Carefully trim the remaining threads and glue them on the back side.

Spoons for lamp

You can make a multi-tiered, colored lamp from ordinary disposable spoons.

It is necessary to make a frame from wire; for a round small lamp you need to make three circles with a diameter of 12, 18, 26 cm. Then the circles are fastened together using fishing line. The largest diameter will be at the top; there should be the same distance between them.
In the spoons you need to make a small hole with a thick needle at the top of the handle.
Spoons color acrylic paints in three colors, for example, yellow, orange, red.
Assembling a homemade chandelier: cut the fishing line to a length equal to the distance between the circles. A spoon is tied to one end of the fishing line, and the other to the frame. You need to tie spoons to the lower circle of small diameter yellow color, to the middle - orange and to the top - red.

Lightweight and elegant lampshade

For a paper lampshade, paper or thin cardboard is suitable. Such a lampshade can be either rectangular or square shape. First you need to think about the size of the lampshade; the larger the room, the wider the structure can be. In a small nursery or hallway, a lampshade with a diameter of 30–35 centimeters will look good.

The frame can be made of wire; it will consist of an upper and lower part; consider making a lampshade in the shape of a cylinder.

You need to make two circles of wire required diameter. They are connected to each other using a fishing line, the distance between the lower and upper frames is 12 - 15 cm, the hoops are fastened with fishing line in three or four places. The larger the diameter of the base, the more you need to do connecting elements.
You can draw circles on a piece of paper different diameters, figurines of cartoon characters. Outline drawings can be taken from the Internet and printed, then redrawn using carbon paper. A special ruler is suitable for drawing circles, or you can outline lids or buttons of different diameters. Some drawings are completely cut out stationery knife, some cut along the contour.
The paper is tried on the base and glued with an overlap. Then glued to the wire; it can also be secured with thin wire. To do this, first make a hole in the paper with a thick needle or awl, then thread the wire and carefully tie it to the frame. It is advisable to glue thin paper, as it can easily be damaged.

Exclusive lampshade made of metal basins

Cans made of any metal are used; an interesting option would be made from copper or aluminum containers. An old, used basin will also work. If there is a through hole in it, it needs to be welded or sealed, for example, epoxy resin.
Inner surface needs to be painted in light color so that the light reflects as much as possible from it.
The outer surface can be painted in a dark, rich color that harmonizes with the interior.
A fringe about 5 centimeters long is glued to the bottom of the headband with hot glue. In the central part of the basin you need to make a hole for the wire. It can be drilled with a drill or pierced with a nail.

Such a lampshade can be decorated with a mosaic of CDs. To do this, the discs are cut into small fragments with sharp scissors, which are glued to the outer surface of the pelvis. You can glue only the bottom outline and paint the rest. Or decorate the entire surface of the lampshade with such a mosaic. The more convex the surface, the smaller the disc fragments should be.

Natural materials

An original lamp can be made from a dry branch of an unusual shape. It needs to be cleared of bark and covered with stain, then, if desired, treated with clear varnish. The branch must be attached to the hook on the ceiling using regular fishing line. Then I wind the wire with the lamp onto the branch several times. A branch entwined with several wires looks beautiful.

You can make a lamp from plastic hangers. Described in detail in the video:

Lamps for different rooms

DIY bottle chandeliers are more suitable for the kitchen. Structures made of glass or plastic will be easy to clean from dust and wash if necessary. For the kitchen, hallway or living room, a lamp made of natural wood.

For a children's room, a lampshade made of painted plastic bottles, a floor lamp made of bright threads, or a paper composition would be more suitable. The last option cannot be called durable, but this is the option that children will like. Girls will like a lampshade with butterflies and plant elements; boys will like designs with cars, superheroes or bright plastic lampshades.

Some cafes and pubs use original lamps made from bottles to decorate the hall. These could be beer bottles. They can serve as a lampshade for light bulbs or be an interesting frame for a lamp.

Ideas for homemade lamps by location

With your own hands you can give new look floor lamp. You can decorate the lampshade with fabric, threads, paper with cut-out designs, and you also don’t need to ignore the base and leg of the lamp. They can be painted with acrylic paints, glazed, and decorated with beads. The decor of the lower part of the floor lamp should echo the elements in the upper part. The simplest option is to decorate the lampshade in a single color with lace or guipure.

Decorating lamps

The lower part of the lampshade made of threads can be decorated with pom-poms same size hanging on a thread. They are glued to the inside of the frame with glue. Pompoms can hang at the same or different heights. They can be made in one color or combined several shades.

For decoration paper lamps You can use lace, thick tulle, beads of different sizes. You can decorate glass jars or bottles with glass pebbles, which can be purchased at hardware stores. You can also use buttons of different sizes and colors. Small buttons can even be glued to PVA.

On new year holidays It is customary to decorate the Christmas tree, but you can also decorate the shades of lamps and floor lamps. Here you can use regular rain, hand-cut snowflakes, Christmas tree figures, decorative balls and a regular garland. If an energy-saving lamp is installed in a wall or floor lamp, then its shade can be decorated with paper snowflakes.

Wall sconces are installed in living rooms, bedrooms, and children's rooms. After repairs, you can use old sconces, only by changing their appearance. You can paint the body of the lamp in a light color, and apply bronze or silver paint on top with a hard bristle brush to create a patina effect. If the lampshade is glass, the desired pattern is applied to its surface using a glass stencil. Here you can use contour paints (they are used to create stained glass) or aerosol paints.