House bathhouse made of 6x9 timber. Projects of houses and baths. Technical characteristics of the project

The reality is that many people have to limit themselves compact baths, because the area of the site and the budget often do not allow doing everything on a grand scale. If you belong to that group of lucky people who have the opportunity to build a large bathhouse, then we advise you to pay attention to the 6 by 9 bathhouse project.

Bathhouse project 6 by 9: advantages and disadvantages

The main advantage is the wide construction area, which makes it possible to create almost any layout.

In such a project, you don’t need to limit yourself to a steam room, a washing room and a relaxation room; you can make a bathroom, place a swimming pool, a terrace, a kitchen and whatever your heart desires! The 6x9 bathhouse project is suitable for building a guest house or a full-fledged country house.

The disadvantage of a 6 by 9 bathhouse is the price - it is quite high. Building a bathhouse of this size will certainly be more expensive than construction, for example, but if you add the cost of the house, it turns out that it is cheaper to build a 6 by 9 bath house than two separate buildings. Savings come from fewer materials and work, and in this case there is no need to make two separate sewer and ventilation systems.

Bathhouse projects 6 by 9: examples, photos

The construction of any building begins with drawing up a project. The drawing should be as detailed as possible; you must decide on the size of the rooms (taking into account the thickness of the partitions), the location of windows and doors, and draw a diagram of the wiring, sewerage and water supply.

At the design stage, you also need to decide on the material from which the bathhouse will be built. The undisputed leader is the 6 by 9 log bathhouse projects. Of course, there are other materials that are in no way inferior in quality (brick, gas block, expanded clay concrete, etc.), but a wooden bathhouse is traditional version, these are the kind of buildings our ancestors built. You feel unity with nature, the material retains heat well, “breathes” and is pleasing to the eye.

In its turn wooden baths are also divided into several types. The most preferable option would be bathhouse projects made from 6 x 9 timber. This material almost does not shrink, looks aesthetically pleasing, retains heat perfectly, and at the same time it is much easier to build a bathhouse from it than from a log.

Remember, the more accurate the drawing, the less likely it is that difficulties will arise during the construction process.

Also keep in mind that the larger the bathhouse, the more difficult it is to make the project, and the more difficulties if it is compiled incorrectly. If preparation is not a problem even for those who are not particularly knowledgeable in this area, then here you need to experiment with caution.

Certainly the most reliable option- turn to professionals, they will draw up a project to suit all your needs and preferences. But you will have to pay for this service. If you prefer to do everything yourself or want to save money, then choose already finished project and make adjustments if necessary.

It’s worth making a 6 by 9 bathhouse project from scratch only if you are confident in your abilities and are well versed in this. Of course, for builders it will not be difficult to draw up such a project, but for beginners it is a difficult task.

As already mentioned, a bathhouse of this size is quite large, so the layout of a 6 by 9 bathhouse can be almost anything. Of course, any bathhouse should have a steam room, a washing room and a relaxation room, the rest of the rooms are at your discretion.

In every project of 6 by 9 bathhouses you can see a bathroom, and this is not surprising: it requires very little space, while the presence of a toilet in the bathhouse eliminates many difficulties and makes your stay much more comfortable, especially in the cold season.

Most often people go to the steam room in the summer, so we suggest paying attention to the designs of bathhouses with a terrace. It can be small, or you can make a spacious veranda that can accommodate not only a table and chairs, but also hammocks, a swimming pool and a summer kitchen.

By the way, in 6x9 bathhouse projects you can often see a kitchen - the area of the bathhouse is quite large, so why not equip it with everything necessary or make it out of one-story bathhouse 6x9, for example, a guest house?

This project will good decision if you need to build country house and a bathhouse. Obviously, the construction of one building will require significantly less money and time than the construction of two, in addition, it will take up less space.

A 6 by 9 bathhouse can easily accommodate a steam room, a washing room, a relaxation room with a kitchen, a toilet, and if you make a second floor, you can add two bedrooms and a balcony - and the house is ready.

Project of a 6 by 9 bathhouse with a terrace

A bathhouse with a terrace is a popular option in Russia. Most people build bathhouses in their summer cottage and relax in it in the summer, when it’s warm outside, so there’s no point in sitting in a stuffy room when you can relax on a cozy terrace.

This project is simple and has nothing superfluous: there is a steam room, a washing room, a relaxation room, a small bathroom and a fairly spacious terrace where the whole family can fit.

This bathhouse is designed for a large company. The project has a spacious washing area, where you can not limit yourself to a shower stall, but install tubs, or even a small swimming pool.

Bathhouse project 6 by 9 with attic

Is there no house on the property? Or country house not big enough to fit all your friends? No problem! Choose this project, and the question of where to spend the night will no longer bother you.

This option provides three living rooms, balcony, terrace. In additional rooms you can make a bedroom, a SPA room, a children's room, an entertainment area, etc.

Project house-bath 6 by 9

Simple cottage, combined with a bathhouse, will good option For summer cottage. The bathhouse is designed for a family or small company. There is a steam room, a washing room, a bathroom, a relaxation room with a kitchen, a vestibule and a spacious terrace on which you can create a barbecue area, a swimming pool, etc.

Project of a two-story bathhouse 6 by 9

The two-story bathhouse is highly compact and spacious. With such a bathhouse, there is absolutely no need for a house on the site, since everything necessary for living and recreation is already there!

On the ground floor there is a steam room, a washing room, a vestibule, a bathroom, an entrance hall, a relaxation room and a terrace. The second floor is occupied by two bedrooms and a small hall.

Convenient is that bath rooms there is a separate vestibule where you can store firewood for the stove, slippers, hats and bathrobes, i.e. there will be nothing superfluous in the residential part of the building.

The best option for installing the stove is near the wall between the relaxation room and the steam room, in this case the room will also be warm when the stove is running.

Project of a two-story bath house 6 by 10

Another option for a full-fledged country or guest house-bathhouse 6 by 9 is presented below. This project, like the previous one, has everything you need: a steam room, a shower room, a bathroom, a furnace room with a separate entrance, a hall, a living room-kitchen, a terrace and a dressing room. The second floor is occupied by a hall, two rooms and a balcony.

But this project is inferior to the previous one in several respects:

the furnace room has a separate entrance located on the opposite side from the other entrance;
you can only get to the bathroom through the shower, which, of course, is not always convenient;
the steam room and the relaxation room are located at a distance from each other, so it will not be possible to place a stove between them, this leads to unnecessary costs for insulation of the rest room.

A 6 by 9 bathhouse is an excellent option for a summer cottage. She has enough large area, therefore, in the construction you can not be limited to the main premises, but also make additional rooms. Do you like spacious rooms or prefer large quantity rooms - doesn't matter! A 6x9 bathhouse makes it possible to realize any ideas!

The cost of building a log bathhouse 6x9 without finishing under the roof is 531,000 rubles

The foundation is support-column. 2 blocks per cabinet (for one-story houses) and 4 blocks in a cabinet per cement screed(for houses with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight.
Total in the log house one-story baths– 16 crowns. There are 17 crowns in the log house of the baths with the attic.
An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm. Steps at the entrance.
The clear ceiling height of the first floor (from the floor joist to the floor beam) for one-story baths is 2.15 m (+/-50mm); for baths with an attic 2.29 m (+/- 50 mm)
The second floor is attic. Clear attic ceiling height (from floor beam to ceiling beam) – 2.25 m
The height of the roof at the ridge for one-story baths is 1.20 m.
The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. Exterior decoration gables - lining (spruce/pine AB) 17*90 mm. Wind protection – NANOIZOL “A” (for buildings with an attic).
In the gables of one-story buildings, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
In the gables of buildings with an attic, ventilation hatches are installed (3 pieces for each gable).
Eaves and roof overhangs with a width of 200 mm (for one-story buildings) and 300 mm (for buildings with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
Installation of window and doorways with a dressing crown, without installing casing bars.
Assembly of a house/bath on the customer's site.

The price of a 6x9 turnkey bathhouse with a foundation and stove is 765,000 rubles

The foundation is columnar. 2 blocks per cabinet (for one-story baths) and 4 blocks per cabinet on a cement screed (for baths with an attic). Concrete blocks, solid, size 200x200x400 mm. The cabinets are installed on a compacted sand bed. Sand (PGS) is provided by the customer.
Waterproofing – roofing felt in one layer.
The strapping is a beam of natural humidity with a cross-section of 150x100 mm. Along the outer perimeter the strapping is laid in two rows. The timber is processed protective composition.
Floor joists - natural moisture board with a section of 40x150 mm per edge, with a pitch of 600 mm.
The subfloor is a natural moisture board with a cross-section of 22x100mm. Steam, waterproofing – NANOIZOL S.
Floor insulation – 100mm KNAUF/URSA mineral wool (or equivalent). Vapor barrier – NANOIZOL V.
The finished floor of the first floor is dry tongue and groove batten(spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
External walls - profiled timber of natural humidity with a section of 145x90 mm (wall thickness - 90mm) "block house" profile or straight. A total of 16 crowns (for one-story baths) and 17 crowns (for baths with an attic).
The partitions of the first floor are profiled timber of natural humidity with a section of 145x90 mm, straight profile. They cut into external walls with a depth of up to 30mm.
Inter-crown insulation – jute fabric 6mm thick
Inter-crown connection - on a metal dowel ( construction nail 6x200mm, 250mm).
Gusset- “half a tree.” The outer corners of the log house are covered with clapboard (spruce/pine AB) 17*90 mm in two rows.
An open terrace (if any) on supports made of planed timber with a cross-section of 100*150 mm, with shrinkage jacks. The fencing is a handrail made of planed timber with a cross-section of 40*100 mm filled with carved balusters. Steps at the entrance.
The terrace floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. They are attached with self-tapping screws to each board. The boards are laid in 5 mm increments.
The terrace ceilings are lining (spruce/pine AB) 17*90 mm. Vapor barrier – NANOIZOL V.
The clear ceiling height of the first floor (from floor to ceiling) is 2.10 m (+/- 50mm) for one-story bathhouses and 2.25 m (+/- 50mm) for bathhouses with an attic.
The ceiling lining of the first floor (except for the steam room) is lining (spruce/pine AB) 12.8*88 mm. (joint for layout is allowed)
The second floor is attic. Clear attic ceiling height (from floor to ceiling) – 2.20m
Floor insulation – 100mm mineral wool KNAUF/URSA (or equivalent). Vapor barrier NANOIZOL V.
The attic floors are dry tongue-and-groove floorboards (spruce/pine AB) 36mm thick. Every fifth board is fastened with self-tapping screws (for the possibility of re-upholstering the floors in the future).
The cladding of the walls and ceiling of the attic is lining (spruce/pine AB) 12.5*88 mm (a joint for layout is allowed).
Insulation of attic walls - 100mm basalt mats ROCKWOOL (or equivalent). Vapor barrier – NANOIZOL V.
The attic partitions are a frame made of natural moisture timber with a cross-section of 40*75 mm, sheathed on both sides with clapboard (spruce/pine AB) 12.5*88 mm. The partitions are not insulated.
Rafters - trusses made of natural moisture boards with a section of 150x40mm, 100x40mm. Installed in increments of 900-1000 mm.
The gables are a frame made of natural moisture boards with a section of 150*40 mm, 100*40 mm. The external finishing of the gables is lining (spruce/pine AB) 17*90 mm. . Wind, moisture protection – NANOIZOL “A” (for baths with an attic).
In the gables of one-story baths, a door (1 piece) and ventilation hatches (1 piece for each gable, under the ridge) are installed.
Ventilation hatches are installed in the gables of bathhouses with an attic (3 pieces for each gable).
The sheathing is a board of natural moisture with a cross-section of 22*100 mm, with a pitch of 300 mm. Counter-lattice - 20*40 mm slats, along the rafter slopes.
Roof covering – ONDULIN (burgundy, brown, green) or galvanized corrugated sheeting. Under-roof vapor barrier – NANOIZOL S.
Eaves and roof overhangs are 200 mm wide (for one-story baths) and 300 mm (for baths with an attic). The cornices and overhangs are hemmed with clapboard (spruce/pine AB) 17*90 mm.
The staircase to the attic is single-flight, on strings made of planed timber with a cross-section of 145*90 mm. Floorboard steps. The handrail and fencing in the attic are planed timber with a cross-section of 40*100 mm.
Finishing the walls and ceiling of the steam room - lining (aspen B) 14*90 mm (joint for layout is allowed). Reflective insulation on a foil base - NANOIZOL FB. Counter rail – 10*40 mm ( ventilation gap– 10 mm). Before covering, the timber base of the walls is treated with a protective composition for baths and saunas NEOMID 200.
Two-tier shelf made of planed boards (aspen B) 28*90 mm. Joint width – 40 cm (height – 50 cm); Lounger width – 60 cm (height – 110 cm).
Installation of the ERMAK 12/ERMAK 16 furnace with a hanging tank (35 l stainless steel) for heating water.
The base of the stove is brick in one row. Cutting the combustion portal - brick.
Fire insulation - basalt cardboard, ceiling and roof passages, reflecting screen made of smooth galvanized steel on basalt cardboard, flush sheet.
The chimney is vertical, with an outlet into the roof through the ceiling. Starting tube - stainless steel. 0.5 mm, stainless steel gate valve, stainless steel starting adapter, sandwich pipes 115*200 mm (stainless steel 0.5 mm * galvanized 0.5 mm), galvanized head.
Installation in a washing room shower tray 800*800 mm with siphon. The drainage outlet beyond the perimeter of the bathhouse is a plumbing PVC pipe with a diameter of 50 mm.
The windows are wooden, double glazed, with sealing and fittings (screw-in hinges, twist locks). Inward opening doors. Dimensions (h*w) 1200*1500 mm; 1200*1000 m; 1200*600 mm; 600*600 mm; 400*400 mm. Windows are installed in casing boxes.
The entrance door is wooden, paneled, solid (spruce/pine A). Size (h*w) 1800*800 mm (for one-story baths; 2000*800 mm (for baths with an attic). Handles, hinges. A padlock is installed on the front door.
Interior doors – bath, frame (aspen A). Size (h*w) 1750*750 mm. Handles, hinges.
In window and doorways casing bars (swarms) are installed.
Sealing of corners, joints, abutments - spruce/pine A/aspen AB plinth.
Finishing windows, doors - spruce/pine frame A on both sides, aspen AB
Nails for fastening parts are black construction nails.
Nails for fastening the lining – galvanized 2.5x50 mm
Nails for fastening plinths, layouts - finishing galvanized 1.8x50 mm.
Loading, delivery up to 400 km from Pestovo, Novgorod region, unloading of a set of material.
Assembly of the bathhouse at the customer's site.
BONUS. Accessories for the steam room. Stones – gabbro-diabase 40 kg.

We have compiled for you a convenient table of differences in the configurations of bathhouses for shrinkage and turnkey.

CONSTRUCTIVE	SHRINKABLE	FULL CONSTRUCTION
Columnar foundation made of concrete blocks 200200400	Yes	Yes
Double strapping made of timber 150*100 mm	Yes	Yes
Floor joists made of boards 40*150 per edge with a pitch of 600 mm	Yes	Yes
Subfloor made of boards 22*100/150 mm	No	Yes
Floor insulation with hydro and vapor barrier	No	Yes
Finish floor – dry tongue-and-groove floorboard 36 mm	No	Yes
Walls and partitions made of profiled timber of natural moisture with a cross-section of 145*90 mm (wall thickness – 90mm)	Yes	Yes
Assembling a log house on steel dowels	Yes	Yes
Corner connection - half a tree	Yes	Yes
Intercrown insulation - jute	Yes	Yes
Rafters - trusses made of timber 40*100/150 mm with a pitch of 900/1000 mm	Yes	Yes
Sheathing – board 20*100/150 mm	Yes	Yes
Roof covering– ondulin / galvanized corrugated sheet C20	Yes	Yes
The eaves and roof overhangs are lined with spruce/pine AB clapboard	Yes	Yes
Window and door openings with a dressing crown, without installing casing bars	Yes	No
Window and door openings with installation of casing bars	No	Yes
Installation of windows and doors	No	Yes
Ceiling lining – spruce/pine lining AB	No	Yes
Insulation + vapor barrier of floors/attics	No	Yes
Finishing the walls and ceiling of the attic - spruce/pine lining AB	No	Yes
Finishing the walls and ceiling of the steam room - aspen lining AB + shelves	No	Yes
Installation of stove and chimney	No	Yes
Installation of a shower tray 800*800 mm with a siphon in a washing room. Exiting the drain outside the perimeter of the bathhouse	No	Yes
Stairs to the attic	No	Yes
Finishing: plinth, platbands	No	Yes
Loading a set of material, delivering it up to 400 km from our base, unloading at the customer’s site	Yes	Yes

*Name*	*Cost, rub)*	*Unit*
Construction of foundations on screw piles or reinforced concrete foundations	8-921-930-69-80, 8-926-742-95-01
Decorative finishing plinth - pick-up ()	1000-1600	linear meters
Installation of reinforced concrete slabs 500500100 mm for support pedestals ( )		PC.
Protection (backing board) of the first row of strapping made of larch boards 50*150 mm ( )		linear meters
Protection (backing board) of the first row of strapping made of larch boards 50*200 mm ( )		linear meters
Double strapping made of timber 150x150mm		linear meters
Double strapping made of timber 150x200mm		linear meters
Installation of floor joists made of timber 150x100mm		linear meters
Installation of larch floors decking boards"corduroy" (for open terraces)()	2000	m*2 floors
Installation of finished floors from tongue-and-groove larch floorboards 27 mm ( )	2000	m*2 floors
External walls made of profiled timber are moisture resistant with a cross-section of 145x140mm, partitions are made of profiled timber. humidity section 145*90 mm	2500	linear meters external walls
External walls and partitions made of profiled timber chamber drying section 145x90 mm	2300	linear meters external walls And partitions
External walls made of profiled kiln-drying timber with a cross-section of 145x140 mm, partitions made of profiled kiln-dried timber with a cross-section of 145x90 mm	4000	linear meters of external walls
The outer walls are made of profiled timber. humidity with a cross section of 145x190mm, partitions made of profiled timber. humidity section 145*90 mm	4500	linear meters of external walls
External walls are made of profiled chamber-drying timber with a cross-section of 145x190 mm, partitions are made of profiled chamber-drying timber with a cross-section of 145*90 mm.	5300	linear meters of external walls
Set of kiln-dried lumber ( )	1000	m*2 building area
Pairing crowns with a wooden dowel	1000
Assembling a log house using a SPRING UNIT FORCE ( )	2000	linear meters external walls and partitions of the log house
Assembling a log house with the height of the crowns tied with steel studs	1500	linear meters external walls and partitions of the log house
Corner groove-tenon joint (warm corner)	6000	one corner of the log house
Corner connection “into the bowl” ( )	from 30 000	house kit
Inter-crown insulation – holofiber()	300/450/600	linear meter external walls of the log house
Increase in ceiling height by 14cm (+ one crown in the log house)	500/750/1000	linear meters external walls and log partitions
Insulation 150mm		m*2 insulated area
The construction of a staircase on strings made of laminated veneer lumber, with wide steps, turned pillars, balusters and a figured handrail.	25000	PC.
Roof covering – metal tiles RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Roof covering – corrugated sheeting with polymer coating (RAL 3005,5005,6005,7004, 7024,8017)		m*2 roof
Installation of a drainage system (PVC, DEKE)	1200	linear meters roof slope
Installation of corner snow barriers ( )		linear meters roof slope
Construction of tubular snow barriers ( )	1300	linear meters roof slope
Attic structure: sparse flooring made of edged boards By ceiling beams, door in one of the gables + dormer window in the opposite gable		m*2 ceiling
External finishing of gables – house block spruce/pine AB 28*140		m*2 gable area
External finishing of gables - imitation timber 18*140 mm		m*2 gable area
Processing the entire building fire-retardant composition NEOMID ( )		m*2 building area
Surface treatment with oil for terraces NEOMID ( )		m*2 floors
Treating the walls and ceiling of the steam room and washing room with NEOMID varnish “for baths and saunas” ( )		m*2 walls and ceiling
Treatment of the ends of the log house with NEOMID TOR PLUS ( )		opening/corner
Treatment of shelves in the steam room with NEOMID oil ( )	1000	m*2 shelf
Wall and ceiling finishing washing clapboard larch 14*90mm ( )	1500	m*2 walls and ceiling
Installation of a “leaky floor” in a washing room ( )	5000	m*2 floors
Finishing with paired lining OSIN A, including shelves - OSIN A		m*2 walls and ceiling
Finishing with paired lining LIPA A, including shelves - LIPA A	1200	m*2 walls and ceiling
Finishing with paired lining LIPA EXTRA, including shelves - LIPA Extra more details more details)	35 000	PC.
Installation of PVC windows with single-chamber double-glazed windows	from 4000	PC.
Installation of PVC windows with double-glazed windows	from 5000	PC.
Installation of a heat exchanger in the ERMAK furnace, installation of a remote tank (stainless steel 60 l) on the wall of the washing room, water supply hot water metal-plastic pipes	20000	PC.
Installation of a tank (stainless steel 50 l) on a pipe above the stove, with a tap leading to the washing room	13 000	PC.
Installation of another ERMAK furnace (	12 000/16000	set
Chimney device from of stainless steel 0.8 mm thick (includes a protective screen and a stainless steel inlet sheet)	16 000/20000	set
Delivery over 400 km from Pestovo, Novgorod region.		km
Construction shed 2.0*3.0 / 4.0 m ()	from 21 000	PC.

The whole country rests on such workers

Alexey Gennadievich!!! Due to lack of time, I couldn’t write to you - thank you very much for the work of your employees in building the bathhouse, two young men, unfortunately, I don’t know their names, they worked clearly and harmoniously, the quality of the bathhouse is EXCELLENT!!! The whole country rests on such workers. All our friends and relatives also noted the impeccable work of the guys, which resulted in the bathhouse we dreamed of.

The guys built us an amazing bathhouse

I would like to express my deep gratitude to Alexey (general director), Sergey Zorin and Vladimir Chistyakov (builders)! At the beginning of August, the guys built us a stunning bathhouse, taking into account all our wishes. The delivery of materials was carried out on time, the construction was completed even ahead of the time agreed upon earlier, the quality of materials and work was excellent top level. In general, just a fairy tale! I advise you to build only with Russian carpenters!

"Price quality"

The work is pleasing to the eye. Fast, high quality, on time. I thank the team of guys (Evgeny, Dmitry, Sergey) and general director Alexey Roslov for the work done. I ordered a bathhouse with a 6x6 attic, project B-20, with minor changes, “for shrinkage”. All work has been completed ahead of schedule and high quality. All my wishes were taken into account. I was very pleased with Alexey Roslov’s attitude towards his work. He always promptly and competently answered all my questions and resolved controversial issues. The team, despite the young age of the guys, worked quickly and smoothly, and at the end they gave advice on caring for the timber and preserving it for the winter. IN next year I will do the finishing with the same team. "Russian Carpenters" wins in all respects compared to other large companies. “Price-quality” is about them. Again Thanks a lot. I will recommend it to everyone.

Two-story bathhouse DB10

(click on the project to enlarge)

Bathhouse 6x9 with attic and gable roof According to our project, it will become the highlight of your site and a recreation center for guests and family. Big sizes rooms allow you to place everything you need and feel comfortable.
When looking at the building from the outside, the first thing that catches your eye is the terrace where you can put coffee table and enjoy nature and fresh air summer evenings. Inside, at the entrance, a small vestibule awaits you, where they usually leave outerwear. It goes into a spacious rest room, which you can design according to your own vision, placing here everything you need for a comfortable stay. There is a locker room in front of the washing room and the steam room itself, which is what makes this 6x9 project stand out. Here you can undress immediately before the steam room. In addition, on the ground floor there is a fairly large bathroom.
On the second floor you will find two large rooms, which can be equipped as bedrooms and combine a bathhouse with a guest house, or create activity zones by installing, for example, a billiard or tennis table, exercise equipment or any other options for an active or relaxing holiday. One of the rooms on the second floor in this 6x9 bathhouse has access to a spacious balcony.

Profiled timber. When building our baths we only use quality material, own production.

(click on photo to enlarge)

Joinery. The final stage bath installations are Finishing work. Wooden windows 1.2x1.0 (0.6x0.6 in the steam room) are used as carpentry. All windows are double, winter, glazed, with fittings. Wooden panel doors 2.0x0.8, metal entrance. It is possible to produce other sizes for the customer, as well as installation of plastic PVC windows,

Photos of timber baths. During installation we use proven technologies, we build from scratch and “produce-ready”.

For wooden baths We use the following types of stoves for heating steam rooms in baths. We install the following models: Teplodar, Ermak, etc. We also install stoves with hobs in houses (baths). Some photos here. More details

When installing a stove in a steam compartment, we comply with the construction and fire safety standards. It is possible to order lining (cutting) with furnace bricks. The finishing of the steam room according to the technology is aspen lining on foil, installation of shelves.

Technical description of a one-story bathhouse made of 6×6 timber

1. Foundation type: support-column
2. Material of main walls: profiled timber 150mmx100, 150x150, 150x200
3. Method of fastening the crowns: on metal dowels (nails 200mm), (on wooden dowels for an additional fee)
4. Cutting of corners is carried out: “into the floor of the tree” (“in a warm corner”, also known as tongue and groove, for an additional fee)
5. Inter-crown insulation: “jute”
6. Material of the “subfloor” and roof sheathing: material of the “subfloor” 20mm edged board, 20mm edged board sheathing with a pitch of no more than 400mm
7. Lag material and rafter system at home: logs made of timber 150mmx100 with a pitch of no more than 1.0 m, rafters 50mmx100 with a pitch of no more than 1.0 m.
8. Floor board and method of fastening: floor board (tongue and groove) 28mm fastened with nails. (floor board 36mm tongue and groove for additional fee)
9. Ceiling height: 1st floor - 2.35-2.4m (17 crowns), 2nd floor -2.3m.
10. Decoration Materials: gables, attics, ceilings and roof overhangs: softwood lining
11. Used thermal insulation material“URSA”: floor of the 1st floor - 100 mm, floor, ceiling, walls (entire attic) 50 mm.
12 Used vapor barrier material: “isospan” (lays on the floor and ceiling, walls)
13. Used waterproofing material: roofing felt (placed between the foundation and the lower crown)
14. Roof type: gable
15.Used roofing materials: ondulin (red, brown, green)
16. Carpentry: a) Door blocks: interior – paneled (2.0 x 0.8 m), metal entrance, with lock and peephole.

b) Window blocks: opening, double, glazed, with fittings (1.2x1m.), in a paired compartment (0.6x0.6m.)

17. Partitions: 1st floor - profiled timber 145x90mm, 2nd floor - frame-panel
18. The steam room is lined with aspen paneling on foil, shelves are installed
19. A change house for construction workers, 3*2 m, remains to the customer upon completion of construction (for an additional fee, supplied if there is no housing on the customer’s site for builders)
20. Generator for rent, customer’s fuel (supplied for an additional fee if there is no electricity at the customer’s site)
21. Installation of the furnace at the request of the customer for an additional fee. fee

Timber of natural humidity (atmospheric) drying (timber of chamber drying (dry) for an additional fee)

A coniferous plinth is nailed to the joints of the corners of the walls and ceiling.

Note: Antiseptic treatment of the bottom frame and subfloors, casing in windows and doors, painting the outside of the house, delivery of change rooms and a generator for an additional fee. fee.

It is possible to replace the foundation, windows with PVC, increase the thickness of insulation, replace the roof with corrugated sheets, metal tiles, etc.

Delivery within a radius of 500 km from Pestovo (Novgorod region) is free.

Additional services:

Double
in the door and window openings
bottom trim and subfloors
one layer on the outside
under the roof
Assembly on
Dry

Spacious chopped sauna(guest house) from a log house 6 by 9 meters. The internal walls divide the log house into a steam room with a shower room, a living room with a kitchen, a boiler room and a dressing room. See 3D models and layout for more details.

Technical characteristics of the project

purpose - bathhouse or guest house
external building size 6 by 9 meters
the dimensions of the log house along the axes are 5.3 m by 8.3 m.
effective area
type of log house - six-wall, manual felling
cutting type - bowl with lock
wood type - pine
average log diameter 26 - 27 cm
height - 12 crowns
roof - hip

Project cost and construction options

Let's look at the main stages of building a 6x9 bathhouse and the cost of each stage.

Log cutting
Construction of the foundation
Installation of log house and roof installation
Installation of windows and front door
Finishing and insulation

Log cutting - 445,200 rubles

The cost of manufacturing a log house (well) at a felling site in the village of Shuvoe, Moscow Region, is indicated.

log diameter 26-27 cm.
log house from winter forest(Arhangelsk region)
calibrated log of normal running quality
processing of logs - hand-planed with an electric planer
cutting into a reverse “bowl with a lock”

Construction of the foundation - 207,000 rubles

The cost of erecting a shallow shallow belt is indicated reinforced foundation. Overall height foundation 1 m (40 cm in the ground, 60 cm - base, 40 cm - width).

Not included in the price: delivery of sand and concrete to the construction site.

Installation of a log house “under the roof” - 383,000 rubles

The finished log house is marked, disassembled, loaded onto a vehicle and transported to the installation site. Installation is carried out on wooden dowels, inter-crown insulation - jute. The price “under the roof” includes:

dismantling of the log house at the cutting site and loading
unloading at the site and assembling the frame
impregnation lower crown antiseptic
jute tape (inter-crown insulation)
birch dowels
logs / beams - 150*200 mm timber
bottom trim - 150x150 mm timber
top trim - 150x150 mm timber
rafter system (rafters, sheathing, waterproofing)
subfloor
crossbar
lining
Povetka
fastener

Not included in the price: caulking, sanding.

Metal roofing - 137,000 rubles

The classic metal tile Atlas classic 0.5 (chocolate color) was chosen as the roof for the Badgers project. Snow guards were also installed, drainage system and ridge aeration.

Installation of windows and doors - 360,300 rubles

Finishing the log house begins with cutting openings, installing the front door and windows. There are 6 in the project window openings and 3 door. The price includes casing installation, plastic windows, metal entrance door, wooden platbands inside and outside.

production and installation of casing of openings (composite-adhesive made of pine wood, 90x300 mm)
Veka Softline windows, profile 70 mm
metal-plastic Veka doors entrance series, profile 58 mm
entrance steel door
wooden trims 30x150 and 30x200 mm.

Finishing and insulation - from 200,000 rubles

vapor barrier of floor and ceiling
insulation of floor and ceiling 10 cm
finished floor made of tongue-and-groove floorboards 35 mm thick.
ceiling trim with clapboard (pine + linden in the steam room)
stove installation
canopy making

Note! Prices for a specific implementation of the Badgers project are indicated. At your request we can change wall material, for example, build a bathhouse from timber or a gun carriage. Or change location interior walls, roof type, add a veranda or attic. Install other windows, doors and finish. Contact us or leave your coordinates.