To the wall is an important task. Its reliable performance should not be neglected. It should be done as well and efficiently as possible.
Please note that if you install the door correctly, you will forget about many problems. It will open and close freely. The effect will last not for a couple of months, but for several years.
The most important thing is the correct adjustment of the gaps that are located between the door frame and the leaf itself. They should be the same both on top and on the side.
You may say: “What’s the big deal if the box bends a couple of millimeters? It will be completely unnoticeable!” Yes, we agree with you. The appearance will not deteriorate. But after a while the door will stop closing. And if he doesn’t stop, then it will be very difficult to do so. That is why fastenings must be made at the highest level.
Neglecting our advice means subsequently changing the entire unit. And this is both troublesome and expensive. And in general – it’s not necessary.
Why jambs bend: all the reasons
Do you know that door jambs made of wood. And, as you know, wood perfectly absorbs moisture. Of course, the outside of the jambs is varnished. And this, in theory, should protect the material from water. But the fact is that the varnish perfectly allows moisture to pass through.
The result is the following diagram. By absorbing moisture, the tree increases in size. And when it gives it away, its size decreases. The process is natural - but unpleasant.
Installation of jambs
Since wood has a non-uniform structure, it both increases and decreases non-uniformly. As a result, the jambs bend.
This is the main, only and main cause of the problem. How to solve it? Yes Easy! The jambs should be properly secured. Then they will remain in their place in any case, even when exposed to external factors.
Experts offer a number of tips:
- first step: insert the frame into the opening. It must be made of metal. And then foam it up;
- Mechanical fastening of the jamb must be done at five points. If you neglect at least one of them, then the door will subsequently become difficult to close. Or other, not the best consequences will arise;
- if the door is double-leaf, then it should be secured at six points;
- if flexible plates are inserted into the opening, they should grip the wall.
Errors that prevent you from performing high-quality fastening
There are errors that lead to poor fastening. Take them into account and try not to do:
- You cannot attach the block only to polyurethane foam because it is unreliable. Foam is an elastic substance and cannot prevent bending;
- foam itself can be a problem. This may cause bending. Everything is very simple - if it lies unevenly somewhere, this provides a bend.
Even professional installers often attach blocks to three points, and not to five, as we advise. This is bad because then the entire lower part of the jamb will be loose, which is why the fasteners bend. So listen to us and don't make mistakes.
IN double doors Often there are no fastenings between the hinges. This is a mistake that should not be made. Be sure to add another fastener between the loops.
The flexible plate must be fixed to two walls. If it is attached only on one side, nothing good will come of it. There is no reliability with such a door. Not only will the jamb bend, it can also turn like a screw.
Four main mounting methods
Mounting methods door frame we have already described above. Now let's select them as expected:
- on polyurethane foam. You shouldn’t do this - in the end, the door may simply fall out of the opening;
- V three points. The most common technique. It's fast and easy way, which is relatively reliable. Suitable for those passages where there is not much traffic;
- at six points. Even GOST recommends this technique. It is considered optimal. The only negative is the plugs because they can ruin appearance at the door;
- using plates. Ideal for expensive doors that you don’t want to spoil with plugs. The plates are attached from the back.
Now let's look at mounting options at six points and using plates in more detail.
Traditional way
The algorithm of actions is as follows:
Installation according to GOST: accessible method and important recommendations
We will not argue about how to properly attach the blocks. There are 4 ways to do this, and everyone has the right to choose what they like best. We will just tell you how to work using the most proven techniques. We have already outlined one in detail above.
Now let's talk about something else. So, instructions:
Now we'll give you a little advice. If you need to put it later flooring, place a gasket underneath the jamb that will be equal in thickness to the floor covering. Afterwards you just need to remove the gasket and lay down the flooring. And that's it - no problems.
- the next step is to insert the box into the opening. Be sure to use the level! We secure it with good self-tapping screws;
- We hang the canvas in place. Checking the gaps. Next you need to adjust the gaps. We have already written about this above, in a different way. This is done by tightening the screws or, conversely, loosening them;
- then the second rack is attached. There is no need to install spacers here, which means there is no need to wait for the foam to dry. The door in this case is ready for use immediately after the foam is applied;
- We install plastic plugs. They will cover the fastenings;
- The last step is to foam the entire box.
That's all! The work is done. Judging by people's reviews, this method is really good, and GOST was not mistaken.
The main signs of a well-installed jamb:
Door frame in place
- the lock, fences and other fittings must be carefully and accurately inserted into the canvas. The main thing is that nothing is skewed;
- All elements of the door frame must be carefully joined together. You can do the docking yourself, it’s not difficult;
- The loop jamb should be made vertical. It is very important! Then the door, no matter how it is opened, will not go down;
- The gaps should be the same everywhere, from top to bottom. For a single door, the gaps on the handle side should be slightly smaller than the gaps on the hinge side;
- Great attention should be paid to the doorway of the canvas, because it must be precisely and precisely adjusted. When this is done, then closed door, from the side door handle, not a single gap or gap will be visible, regardless of whether there is a seal on that side of the jamb or not.
What should the result be?
Please note that the handle on the door should turn without the slightest effort. At the same time, she must return to her place as soon as she is released.
The door should close very easily. It happens that when closing, the hinges pull slightly, this should not happen.
The lock on the door should close easily. And at the same time it must be tight and reliable, otherwise it will be very easy to open the door.
Mounting to the wall is important, no matter how you look at it. We have already said that this is important so that the door does not become deformed; no one wants to see an ugly door in their home. Moreover, from an aesthetic point of view this is unacceptable.
Any bend in the frame can cause the door to be difficult to open or close. Moreover, the door may eventually stop opening and closing at all! And then you will have to change the entire block at once. And this is expensive, troublesome, and will take a lot of time. Therefore, it is better to do the job correctly right away than to redo it later.
But that's not all! The fact is that due to the bend, the door may simply fall out. But this is not the worst thing. The worst thing is that a poorly installed jamb can lead to the door being simply opened. It is enough to give such a door a good push with your hand or foot to knock it out along with the jamb. And then - complete freedom of action. You can simply take and remove all property from the apartment. Thieves and robbers use this method very often.
Therefore, we strongly encourage everyone to listen to us. Do not install the joint only on the foam, but use the techniques and methods that we have already described above. Then the jambs will be secure, the door will become impenetrable. And you, the owners of the apartment, will be calm.
To quickly and conveniently install interior doors, you can use a special installation kit, which will greatly facilitate the installation process. AND experienced craftsmen, and especially beginners, claim that using a kit to install doors is much more convenient and easier. In this article we will look at the features of the installation kit and find out what is included in it. We will also find out at what price you can purchase this useful auxiliary device from different manufacturers.
Description of the installation kit for quick installation of doors
The installation kit consists of two parts: the first one is attached to the door frame with its inside, and the second part - to the wall of the doorway. By connecting parts of the fittings system to each other, it becomes possible. And, in addition, you can adjust the level of the evenness of the box with the canvas already installed.
You can make adjustments and check the evenness of the installation at any stage of the work: and at any stage it will be possible to correct the “jamb”, if there is one. At the same time, the savings in time and effort are significant.
Find out how to install a convenient handle with a lock for an interior door.
pros
Let's find out what are the advantages of an installation kit for installing doors.
Although the kit looks like just a set of fasteners, in fact it is a well-thought-out technology from start to finish. door installation. And included with the kit detailed instructions will allow the installation of doors even for a person far from such activities.
Using the kit allows you to significantly save on the purchase of fasteners, as well as save nerve cells and time. The kit already includes all accessories and necessary elements for mounting the door frame.
What to do if the key is stuck in the door lock will tell you.
All installation kits are hidden fastener. They do not require through-drilling of the box. The door decor does not suffer from their presence. At the same time, the kit allows you to fix the box in six places, which makes the finished product securely and firmly fixed.
Thanks to this device, standard preparation, which usually takes a lot of time and effort, can be eliminated from the work process. This allows you to significantly simplify installation and save time.
Some of the work that will not be necessary when using the installation kit includes the following:
- adjustment (more often - reduction) of the opening area;
- strengthening the walls of the opening;
- adjusting the floor level and other types of work.
This reduction in work steps reduces installation costs and provides significant time savings.
One of the undeniable advantages of using an installation kit is the ability to quickly and easily dismantle the old door, and just as quickly fix a new one in its place. In this case, there is no need to destroy the opening, since the new door is hung on the remaining fasteners from the old one.
The versatility of the fasteners included in the installation kits allows it to be used for installing doors of various sizes and modifications. In addition, the installation kit will cope even if the door deck is noticeably skewed. 
How to open a lock front door without a key read .
Using the installation kit, it is easy to install doors in wall openings made of a variety of materials:
- wood;
- bricks;
- concrete;
- drywall;
- foam concrete, etc.
When using such a set, the need to use spacers, wedges, and other types of temporary fixation of the box disappears. Adjustment is carried out using open-end wrenches, available in literally every home. If after all open-end wrench If you can't find it, you can use pliers to tighten the adjusting screw.
Well, if the gap between the door deck and the opening is insignificant, then you can eliminate one nut, leaving 5 fastening points. This method allows you to reduce the clearance to 10 mm. Thanks to reliable fixation, service life is significantly extended door block.
Due to the fact that when using mounting kits to install doors, there is no need to “foam” the gaps in the frame, the reliability of the fasteners increases. In addition, the specified parameters of the metal brackets do not lose their relevance even after several years, which will ensure the evenness of the box. Foam used during conventional installation may begin to crumble and lose rigidity, so the benefits of using metal fasteners are obvious.
It is possible that information about rim locks for the entrance will be useful to you. metal door which will help you understand.
Metal fasteners securely hold the box in the opening, so even after the voids are filled with foam, the box does not “warp.”
When the door is installed in the usual way, it can be used only after the foam has completely hardened. And when using metal fasteners of the installation kit, this opportunity appears immediately after completion of the work. For some rooms (bathroom, toilet, kitchen) this advantage is very important. 
What is included in a set of fittings for an interior door frame
Let's find out which constituent elements included in the installation kit for installing doors.
- The kit necessarily includes detailed instructions, following which you can competently and quickly handle the door installation.
- Special universal key, which allows you to quickly cope with the fixation of all fasteners. They can be used to tighten all the nuts included in the kit, which is also beneficial to the person doing the installation. You may also be interested in information about.
- Nut with collar. This fastener makes it possible to firmly fix the door in six different places, which provides the fastening with much greater reliability. Some manufacturers also offer special nuts without washers, which make the installation process even simpler.
- There are also six screws with a press washer.
- Plastic dowels - 6 pcs.
- Low nut - 6 pcs.
- Self-tapping screws of a certain size (usually 16 mm) - 12 pcs.
- Hex head bolts allow for reliable and durable fixation of the door frame.
- Mounting bracket - 6 pcs. This element allows you to adjust the evenness of the door frame installation with a minimum error. In this case, the adjustment can be carried out with the door leaf already installed.
Features of mortise locks for entrances wooden doors told.
Manufacturers and prices
Let's find out at what cost installation kits for installing doors from different manufacturers are offered today.
Crepe door company offers high-quality installation kits from economy class to Special level. So, the economy option for 400 rubles is perfect if the weight of the door leaf does not exceed 50 kg.
But the “station wagon” set is more popular, which is also suitable for doors of the same “weight category”, but it includes a special curved key. The last tool allows you to quickly adjust the gaps and fix the brackets. The cost of the “station wagon” set is 420 rubles.
For massive heavy interior doors(for example, made of oak), the company offers an option with reinforced brackets. The cost of the “special” set is 495 rubles.
Domestic manufacturer "Ocean"» offers mounting devices for installing doors at a price of 400 rubles. Minus - the curved key is not included in the package. But if you do not take this drawback into account, in general the quality of the fasteners is decent and quite competitive.
You can also read the material on how to change the lock on a metal entrance door.
By the way, if you search hard, you can find offers even at a price of 100 rubles per set. But in in this case A minimum order amount of 500 rubles is required. The quality of such sets raises logical suspicions, so it’s better to pay more, but get a guaranteed purchase quality product than becoming the owner of five faulty sets.
Video
Installation kit for installing doors:
We examined the features of using an installation kit for installing interior doors. As you can see, this device- a thing, without a doubt, very useful, saving time, effort and money. In addition, the installation kit allows even a beginner to cope with the work. Therefore, if you are planning to change the doors inside your apartment, do not forget to purchase this useful set of fasteners, with which you can get the job done in a short time.
Installation of the door frame is carried out only after completion finishing works on the ceiling and walls. The renovation of the room should be completely completed, but the baseboards should not be installed yet.
Doors can have the following types of configuration:
- door block - all parts are connected, hinges are cut in, and the doors are hung. This is the easiest type of interior door assembly for installation, since everything is already assembled and all that remains is to install the door yourself;
- door leaf and a box. This set consists of all the parts that fit each other perfectly in size, but have not yet been assembled. The owner needs to correctly assemble everything into a single whole and then insert the door;
- door leaf. All materials and components in this situation are purchased separately. Next, assemble the door frame and install the door in doorway.
The more complete the doors are, the more they will cost you. This must be taken into account when choosing the most suitable configuration.
Door frame dimensions
The door frame consists of many elements and to assemble it you need to clearly know all the parameters of the components. Their dimensions are directly dependent on the height and width of the wall for which the door was selected correctly.
Experienced craftsmen advise adhering to the following ratios of component sizes:
- For interior wall made of brick, about 70 mm thick, you need to choose a door frame with a width of 108 mm;
- for a wooden block wall with a thickness of about 100 mm, the best option will wooden box, having a width of 120 mm.
These parameters of wooden door frames absolutely comply with the standards in our country. Foreign manufacturers can produce boxes with sizes from 80 to 205 mm.
If the dimensions of the door frame do not correspond to the width of the doorway and the thickness of the wall, then you can replace it with a special “draft version”. In this case, the door frame is made of boards or special beams and correctly adjusted to the thickness of the wall.
Required Tools
Installing a door frame with your own hands does not require significant effort, you need to know how to do it installation work, and also have the necessary tools on hand:
- hammer;
- drill or screwdriver;
- nails (for interior box installed in a wooden wall);
- screws;
- milling cutter;
- hacksaw;
- wooden slats;
- chisels;
- building level;
- template for installing door frames;
- a set of bars, which are usually sold together with the door frame.
If you do not have such a tool, then you can rent it for a nominal fee.
Removing the door frame
Before you install new door, it is necessary to properly dismantle the door frame. First you need to remove the platbands, and then carefully disassemble the wooden door frame. Old bolts and fasteners can be removed by cutting them down with a grinder or a hacksaw; they will not be useful in the future. After complete dismantling door design you need to check the strength of the interior wall and properly strengthen it, if necessary.
Sometimes, when a wall requires fastening, it is necessary to use a special reinforced structure or carry out concrete works. Thanks to such methods, you can significantly strengthen a wooden or brick wall and increase the service life of the door frame.
Door frame assembly
To assemble the door frame, you need to perform a number of these sequential steps:
Installing a door frame
After installing the door frame to the wall with your own hands, you need to place it exactly in the center and once again check how accurately all the elements are located. This can be done using a level, plumb line or square.
If there are gaps at the joints, they are sealed using any heat-insulating materials.
Next, the verticality of the sidewalls is re-checked, after which they need to be secured in the required places. If in your home wooden walls, then you can put the box in its place using nails, with brick walls use screws.
A template for installing door frames will help to significantly simplify the work of installing a door. You can make it yourself or buy it ready-made.
Methods for attaching a door frame to a wall
There are four main methods to secure a door frame:
Every master is faced with the problem of how and what to attach assembled doors. To install a finished door block, it is possible to use in various ways installations. Knowing these installation options, you can easily choose the one that suits you. You will need a small set of tools: a drill, a hammer drill, a level, a screwdriver and a hammer. Also, to directly secure the box in the opening, fasteners and polyurethane foam are needed. Depending on where you need to attach the door block, you may need screws, dowels, and anchors.
The main stages of installing a door block
At the very beginning, the old door frame is dismantled. This can be done using a nail puller (crowbar), having previously made cuts on both sides of each vertical bar, in order to then press this structure away from the opening. If anchor bolts were used when installing the old box, nails that are not possible to unscrew can be cut off using a grinder.
Before installing the frame of interior doors, it is necessary to check the verticals of the walls and take into account differences in the level of the walls and floor. The door frame must be positioned so that if there are any unevenness, the frame does not go deeper into the opening. This is necessary for the door trim to fit. In order to correctly position the door frame, you should use a building level and take into account all the errors in the opening.
First, the installations are rigidly fixed in the opening to achieve the initial level of rigidity using wedges. After completing the fixing work, it is worth re-checking the correct positioning with a level so that the frame is level with the door.
Working with polyurethane foam
It is important to know that the foam that is intended for the gun is much better and more convenient to use due to the fact that it is more dosed and has a small expansion coefficient; it hardens much faster. Foam served with a straw big amount, it will take longer to expand. Before starting work, it is better to close the door leaf masking tape and film, because foam is difficult to wash. It is important to know that you need to start foaming by fixing individual small areas. After 30 minutes you can already go through the entire perimeter. All cracks are filled with foam (50% of the total volume). Do not fill with a large amount of foam, because during expansion the foam will squeeze the box inward. We recommend using professional foams.
Since wood contracts and expands precisely because high humidity the consequence of expansion is deformation of the door block. The door will simply stop closing for this reason.
Video on possible door installation methods
There are several ways to fasten a door frame in an opening, each of which involves the use special type fastenings Various options fastenings provide a certain level of reliability and strength of the fixed structure. We hope the video stories on options for installing wooden door frames will help you.
Hidden method of installing doors on foam
The door frame is fixed in the opening using wooden wedges for fixation, and correct location checked according to the building level. Foaming polyurethane foam need to be done little by little, in sections and with breaks to avoid deformation. The door frame is held in place almost thanks to foam alone.
To maintain the gap between the frame and the door itself, small 3 mm spacers are used, which are inserted between the door and the frame. They can only be removed when the foam dries. Usually the door is left overnight.
This method is convenient if you do not need to go into the room, it is fast and does not require special effort. It is important not to overdo it with foam so that you can open the door.
Installing doors using clamps or spacers
The installation principle is that we use spacers inside to temporarily fasten the door block in the opening. These can be either ordinary wooden rivers or special adjustable devices.
Both of these methods are very good for light and small doors.
Fastening doors using Knauf hangers
For these purposes, direct suspensions from the Knauf company, which are used in suspended ceilings, are ideally suited.
- The plates must first be screwed to the box.
- Insert the door into the opening.
- Adjust the level.
- We mark the places for the recess in the wall.
- We make a sample for the plate.
After this, we set it according to the level and fix the plates. To adjust, we use wedging with wooden blocks.
It is also necessary to take into account that with this method of mounting the box on outer part walls, the place of the recess will definitely need to be hidden under a layer of plaster. That is why this method is only good if there is no finishing.
New mounting options
This video will show you how to secure a door frame in an opening. This type of fastening involves installing an interior door frame by placing the frame on the screwed heads of the screws that are located at the ends of the opening. This happens with the help of metal plates with a hole, which are screwed with outside boxes.
To achieve final fixation of the frame in the doorway, conventional means of adjustment are used.
With this method, the door block pillars move freely in the opening.
The obvious advantage of this method is the full possibility of adjustment and at the same time rigid fixation while maintaining the original appearance of the box and exterior finishing walls. 
Concealed installation, fastening under hinges
As a rule, for the rigidity of the structure, screws or anchors are used, which are hidden under the hinges. To do this, make a hole between the screws in the hinge and attach it to the wall through it. On the side of the lock, under the decorative plate, another fastener is attached. As a result, we get 3 fixation points.
After direct fastening, we place a spacer at the bottom of the doors, since the bottom is not secured, and fill all the gaps with foam.
A significant advantage of this method is relative rigidity and preservation of appearance.
Through fastening with anchors or screws
This is the most common standard option installation of interior doors. For this fastening option, holes for anchors are first drilled in in the right places racks, then fasten the door in the opening.
Preparation
- Marking 4 anchors on each side.
- Drilling with a 14 mm pen to a depth of 10 mm (space for the plug).
- We drill a through hole with a 10 mm pen (a place for fixing with an anchor).
After which the box is exposed and the concrete is drilled with a 10 mm drill for the anchor. When the box is supported by anchors, it holds securely and does not require any spacers. Mounting points can be hidden by installing decorative plugs desired color, size (14 mm). Instead of anchors, you can use screws; this will reduce the diameter of the plug. The use of this option is the most reliable for heavy doors. Using it you can straighten (tension) a crooked rail. The doors can be used almost immediately. It is possible to adjust the gap. The downside is the presence of plugs. 
Tricks for installing door panels
Conclusion
There are many options for installing interior door frames, but you should choose the one that is the easiest, most convenient and reliable, or the fastest. The choice can be made using any door installation method, but these methods may be affected by the opening in which the installation is taking place, taking into account the intensity and other factors.
– the procedure is troublesome and time-consuming. But with minimal skills in working with wood and necessary tools You can still handle the installation.
Not only the aesthetics, but also the strength of the structure depends on whether the door frame was installed correctly. But before you get started, you should familiarize yourself with the main parameters that you need to pay attention to during installation.
Construction plans
There are two schemes for fastening the door frame, which differ in the execution of cuts:
- to make a cut at an angle of 90ᵒ you need a saw with small teeth, accuracy and minimal knowledge of woodworking technology;
- for an angle of 45ᵒ you will need a miter box or miter saw.
The second mounting scheme is described below, as it is simpler to implement. Now - directly to the installation.
Stage 1. Door frame elements
You should first purchase necessary details designs. Here is a list of all components:
- door leaf;
- self-tapping screws with dowels;
- a pair of vertical bars 2 m long;
- one horizontal block;
- wooden platbands;
- anchor bolts of the appropriate size;
- iron hanging bars;
- platbands;
- wedges of a size corresponding to the width of the opening between the block and the wall surface;
- polyurethane foam;
- foam spray gun.
Stage 2. Equipment
Installation will require a lot of tools and materials. Every owner should have some of them, the rest need to be bought or rented. So, For work you need to prepare:
Stage 3. Dismantling the old box
Preparation for installation often begins with dismantling old door. This must be done in this sequence.
Step 1. First of all, the trim is removed and the door frame structure is disassembled. All this must be done very carefully so as not to damage the wall.
Step 2. Anchor bolts and other fasteners are unscrewed or, in extreme cases, cut down.
Step 3. The wall is checked for strength and, if required, further strengthened.
Note! Do not neglect the strength of the wall, because the reliability and durability of the box directly depends on this. If strengthening is necessary, it is better to make reinforcement and finish cement mortar"problem" areas.
Stage 3. Installation of the door frame
Before starting, it is advisable to lay out all the components on the floor at a single level, having previously placed cardboard or other soft material. The structure can also be placed on two tables or four stools.
Step 1. Upon completion of the dismantling work, measurements of the resulting doorway are taken. It is important that the width and height of the structure are at least 5 cm less than the opening - this will allow the installation of spacer wedges.
Note! The wedges must be 0.5 cm larger than the gaps, otherwise the fastening will not be strong enough.
Step 2. The ends of the bars are cut off with a miter box at an angle of 45ᵒ.
Step 3. Holes are made at the joints of the bars. The bars are tightened with self-tapping screws. When tightening, you need to be extremely careful, because if you overdo it, the wood may crack.
Bottom bars in modern designs not provided.
Step 4. Determine which side will be attached door hinges, after which their outlines are outlined. The door leaf is tried on and the presence of a small gap between the floor and the frame is checked. Using a chisel, prepare the fastening points door hinges. The hinges are screwed with self-tapping screws to the canvas and block.
Step 5. Where the box will be adjacent to the wall, hang the hanging strips with self-tapping screws. The bar of each frame is equal to the width of the wall, and the antennae extend 5-7 cm into the inner and outside. There should be two similar strips horizontally, and three vertically.
Next, the door frame (only without the leaf) is installed in the opening. Using a level and plumb line, the horizontal/verticality of the structure is checked. A spacer frame of the same size as the bar located on top is installed at the bottom.
The frame for the doorway is almost ready.
Step 6.
Step 7. All that remains is to secure the box with anchors. Along the entire perimeter of the beam, through holes with equal steps, points for drilling the wall are marked in parallel. Then the wall is drilled with a hammer drill, and anchor bolts recessed into the block are inserted into the resulting holes. The fasteners are tightened with a wrench.
Step 8. At the end, the door leaf is hung, after which the axes are aligned. If everything is done correctly, the door will open and close easily. All cracks are filled with polyurethane foam.
Note! The amount of foam needs to be controlled, because an insufficient amount will reduce the strength of the structure, and an excess can cause deformation of the box.
After this, platbands with pre-cut corners are installed. For fixation, small nails without heads are taken, all joints are covered with wax-based mastic.
Video - Assembling the door frame
Methods for fastening the box
If the width of the opening is greater than the width of the box, then instead of wood you can use jambs made of MDF - a building material used in last years very popular. In this case, the fastening technology is almost the same as described above.
Various additional elements are used to increase the distance from the beam. Such elements can be purchased ready-made in a store or pre-cut at the preparation stage. In most cases, MDF is used with a special trim strip located in the center. This strip is removed, and the required number of holes for anchors is made in the groove located under it. Then the groove is closed with a bar and a reliable and aesthetic design is obtained.
Door frame in a wooden house
Wood - excellent construction material, the main disadvantage of which is subsidence after construction. For this reason, you need to know how to make a door frame in this case.
In this case, there can only be two options.
- If the width of the opening corresponds to the size specified in the project, then grooves are made at the ends and timber is driven into them. A box is nailed to the beam (it is better not to nail it directly to the walls, because the notorious subsidence will continue).
- If the opening is not formed, the hole must be made slightly smaller than that specified in the project. In this case, the timber is made with a groove.
The sequence of actions should be as follows.
Step 1. First, the outline of the future opening is marked, using a building level and plumb line.
Step 2. Then the opening is cut out, the upper and lower parts are planed.
Step 3. The diameter of the log house is measured and the dimensions of the door frame jambs are determined from the resulting figure. Shoals are made from blocks.
Step 4. The decks are split into blocks and hewn.
Note! It is not at all necessary that the profile of the jambs be rectangular - it can be, for example, trapezoidal.
Video - Door frame made of wood and MDF
And one last thing. During repair work the humidity in the room usually increases, which is very important, especially when assembling the door frame. After some time, the door, which was previously sitting tightly, begins to loosen. At the same time, many craftsmen also prefer to save on accessories. This is not necessary, because weak fastening usually causes the fragility of the door.
