How nice it is to walk around your own garden, according to him beautiful paths, admire the well-groomed beds and flower beds, and then eat a rosy apple straight from the branch. But in order for all this splendor to exist, a lot of work has to be done. In order for the soil to be fertile, it is necessary to add a lot of organic matter. Mulching with grass – great way keep the soil in good condition. It can be spread out on the beds immediately after mowing or pre-composted. In order for thick stems of greenery to decompose more actively, it is recommended to chop them first. You can make your own herb grinder or just buy one.
The choice of finished equipment largely depends on the volume of raw materials to be ground. After all, ground grass is needed not only to fertilize the soil. It is also useful for those who have a subsidiary farm: chopped greens are added to the feed of livestock and poultry. A small amount of work can be easily handled with a regular saw. This is the name given to a triangular plate equipped with a durable and sharply sharpened lower edge.
A chopper is a basic tool for chopping grass. If the amount of work is small, then you don’t have to buy or build a gasoline or electric grass cutter. Place the cutting on the cutting and get to work
To work, the chaff is placed on a long stalk. It allows you to avoid bending over while doing work. The raw material to be chopped must be spread on the ground in a layer of 10-15 cm. The surface should not be hard, and the layer of grass should not be too large. Then the cut will not become dull and will not spring back. When the chopper hits from top to bottom, the grass is cut into small pieces.
If the volume of greenery being processed is large enough, you need a solid unit, which this video will help you choose.
The main purpose of this article is to find ways self-made the equipment needed on the farm. If you have the desire, patience and minimal skills, you can make a homemade herb grinder that will work just as well, and perhaps even better, than a store-bought one. Better, because only you yourself know the needs of your farm and can perfectly adapt the device to your own needs. It will be exactly what you need!
Option #1 – a drill to help you!
An excellent grass cutter can be very easily built from conventional drill. Exactly how this simple device works can be seen in the video below.
So, the grinding process resembles work food processor: in a cylindrical body, the role of which is a simple bucket, there is a sharpened knife. When rotating it in a circle with high speed the grass is being cut. To make this grass cutter, a two-mode Temp drill with a power of 850 watts is used. The knife is made from hacksaw blade. The whole secret is hidden in sharpening the knife. If done correctly, the grass will not wrap around the blade. The knife should remain clean and free of greens.
Sharpen the knife with a one-sided sharpening. It should be oriented with the sharpened plane facing down. If you have to chop fresh grass, best shape The knife will have a narrow diamond shape so that the cutting edge disappears at an angle to the edges. As a last resort, you can round the blade towards the tip. Then the grass, which is affected by centrifugal force, slides along the cutting edge of the knife straight to the edges. It cuts easily and never wraps around the knife.
Option #2 – for owners of the Typhoon vacuum cleaner
The working principle of this device is no different from the previous one. It just looks more civilized and its performance is higher. If in the previous case the grass was already in the container where it was placed cutting tool, then now the raw material is supplied through the upper hole, and the finished substrate exits through the lower one, located in the side of the apparatus. To prevent the finished silage from being scattered when poured out, it must be used for the outlet protective cover.
Perhaps such a grass cutter does not look as presentable as a purchased one, but it is functional and practically free. Decide what is more important to you
The chopped grass is collected in a bucket, which must be carefully placed under the outlet. It is clear that when choosing the height of the racks for the unit, it should be taken into account that a bucket of normal parameters must pass freely to be placed in in the right place. So what does Typhoon have to do with it? The body from the old Soviet vacuum cleaner "Typhoon" is ideal for basic garden shredder Herbs: It has a top hole of the most suitable size. I repeat once again: this perfect option. But not the only one!
Any cylindrical container, be it an old pan, bucket or piece of pipe, will also work. The 180 Watt motor can be borrowed from the old washing machine. An old hacksaw blade will be used for the knives, and it is recommended to use a 15x15 mm rectangular profile as stands. The bushing, 40 mm high, on which the knives will be attached, will have to be machined lathe.
The process of making a herb grinder is not as complicated as it seems. In the photo: No. 1 – body, very convenient, because you can load grass into it from above, No. 2 – engine from washing machine, No. 3 - location and appearance knives
The engine with the pulley removed is mounted on studs from below to the container. To tighten the knives, water nuts 32 mm in diameter are useful. When making bushings, be careful to cut threads for these nuts. Don't forget about the hole for the motor shaft. To ensure reliable fixation on the shaft, two holes of 7 mm in diameter are made in the bushing with M8 threads cut into them for locking bolts. On the motor shaft with reverse side the pads are machined to increase the reliability of fixing the bushing with locking bolts.
At a height of 15 mm in the upper part of the cylinder, the edges were removed with a grinder to form a square with a side of 25 mm. Knives will be put on him. To make knives, you need to cut 4 blanks from a hacksaw blade using a grinder. In the central part of each workpiece is cut square hole with a side of 26 mm. The width of each part depends on the degree of rigidity of the original metal. It is clear that the knives should be placed closer to the bottom. Their cutting edges sharpen using a sharpener. The bolts securing the sleeve are placed above the knives.
In the photo: No. 4 is a bushing for securing the knives and connecting the engine to the body, No. 5 is a square on which the knives will subsequently be attached, No. 6 is the chopper platform, which is made in the form of a truncated pyramid
If it is not possible to make an outlet for the silo directly under the knives, then it will be equipped on the side. To do this, you can use a grinder to make a 7x7 circle. Tin is used to form the guide body. The housing is attached to the chopper with M3 bolts. The platform of the unit must be as stable as possible. To do this, its base is made larger than the top. It has to be made as functional and convenient as possible.
The purpose of the platform is not only to support the chopper, but also to protect the engine. It is secured to the container with 3 M 6x45 bolts. Side faces It is better to cover the platforms with sheets of tin. The racks are threaded for M3 bolts, with which the sheets are secured to the platform.
Option #3 – grass cutter from what was on hand
Armed with the knowledge gained from reading the description of the manufacturing process of the previous unit, you will special labor and effort, build yourself something just as simple and useful.
This grass cutter is literally made from something you found in the shed. All things have served their purpose long ago, but in this design they will certainly be useful to their owner for a long time
For basic grass cutting you will need:
- Agidel pump or any similar electric motor capable of 3000 rpm and powered from a 220V network;
- old aluminum pan;
- used wood hacksaws, from which you can make wonderful knives;
- to start the engine you need a button, the role of which will be perfectly played by the NVD from the washing machine;
- plug and power cord.
We invite you to carefully examine the photographs, because they do not need any special comments. Everything is very clear. Start creating your herb grinder and you'll do great.
Pay attention to how the blades are placed in this herb chopper. It is possible that you will choose this particular model
The motor is installed under the pan, and the start button is located at the rear of the platform to make it easier to reach.
Such grass, chopped using a grass cutter, is perfect for feeding livestock and poultry, as well as for mulching purposes.
Option #4 – homemade straw cutter
Three previous units successfully turned grass into silage. But if we need a chopper not only for grass, but also for hay, it’s worth taking a closer look at another invention, which is presented in great detail in the video below.
A Few Safety Warnings
Any device, the creation of which is described above, is equipped with sharp cutting parts. To ensure that it serves you for a long time, brings relief in your work, and does not cause injury, follow basic safety precautions when performing work.
If the operation of the unit involves electricity, be doubly careful and take necessary measures. Be especially careful that children do not try to operate the grass cutter. It's better to overdo it than to underdo it!
Are you wondering where to put the grass that you mowed on the site, leaves, stems and tops? One option is to chop up the “free resource” and put it to use. For compost or food for small animals. For this you need a grass cutter. Don't want to overpay for a store-bought one? Make it yourself, inexpensively, as the users of the portal did.
- Homemade grass cutter “Monster” from an angle grinder and a galvanized tank
- Grass chopper and corn sheller with engine “Made in USSR”
- Features of the operation of homemade products and ways to improve them
Do-it-yourself grass cutter driven by an angle grinder
Tok2Z User FORUMHOUSE
I have birch trees growing in my dacha. Leaves are falling from the trees. We have to remove it, burn it, slaughter it compost pit. The foliage takes a long time to rot. I decided to chop it up. For this you need a grass cutter. I looked at what they were making on the Internet. I turned on my brain and this is what I came up with.
Did you like inexpensive option garden shredder? Read the article further and find out how to make a homemade product from an angle grinder and a metal tank. Tok2Z acted like this:
- He thought about how to twist the chopper blades. The choice is small - install a motor from a washing machine, or buy an electric motor. According to the user, the motor from the washing machine is weak, and I didn’t want to purchase a three-phase unit and convert it to one phase.
- Tok2Z bought on the market for 2 thousand rubles, old grinder, power 2 kW and blades from a lawn mower for 700 rubles. I ordered an adapter sleeve from a turner, spending another 500 rubles.
- I welded the frame and placed a galvanized water tank on it. I assembled the structure and turned on the grass cutter.
Tok2Z
The turnover is crazy. I threw a shovelful of leaves into the tank, and they blew away! I checked where the flow was going. Air goes up from the edge of the tank and is sucked in in the middle. I cut out a galvanized ring and installed it in the center of the tank. Threw the leaves. The knives crushed it just right, and it flew into the lower pipe.
To grind the grass into a very fine fraction, the user installed a corner in front of the “exhaust” pipe.
Pipe diameter 10 cm.
The grass cutter shreds the leaves directly into the compost bin.
Compare: a pile of leaves.
Shredded leaves.
Tok2Z
The grass cutter threshes everything - grass, leaves. Sometimes, along with the foliage, a wire comes across. Pebbles. Pieces of metal. The crusher crushes the stones. No iron. You have to turn it off, look for trash and throw it away. The noise is terrible. The disadvantage is the thin walls of the tank. It breaks through. I will redo it. I will make a tank from a sheet of iron 1-2 mm thick.
Universal grass cutter and corn sheller
Alex Nk User FORUMHOUSE
I also made a grass cutter. I mainly use it to chop grass for poultry. The basis of the homemade product is a kilowatt motor made in the USSR. I bought it for 1400 rubles. Works great. The engine is three-phase, but converted to operate from a 220 Volt network.
Making a homemade grass cutter step by step:
- The turner turned out the flange.
- Holes were drilled and threaded in the flange.
- The knives were made from a piece of an old rusty two-handed saw.
- The knives were screwed to the flange.
- The grass cutter frame was made from a sheet of metal 4 mm thick. A strip of metal with a cross-section of 4x40 mm was welded to the square, which was bent in a circle. A hole was drilled in the center of the frame.
Alex Nk
I bent the strip with a hammer, striking the metal on the jaws of a vice. The radius was controlled in a circle by drawing it on the bed.
At the finish, the user welded the legs to the base. Pinned Electrical engine. I made a large tank with a lid so that debris would not fly out of the grass cutter while the engine was running.
Homemade mobile grass cutter on wheels.
The tank is removable for ease of use of the grass chopper.
The engine produces 1500 rpm. The grass cutter operates almost silently.
Finished products.
Corn husker from grass cutter
Alex Nk I decided to use a grass cutter to make a mechanism for shelling corn. The result is a two-in-one unit. To make a homemade product you need:
- Cut a disk out of metal.
- Drill holes in it for M6 bolts.
Tests have shown that the height of the hex head of conventional bolts is sufficient for shelling corn. The disc was raised from the base by 4 cm.
- Rework the base so that the outlet is at the bottom. This is how the grass is chopped finer, and the corn is not chopped.
The slope of the output tray has become steeper, almost vertical. This way the grass mass did not clog the hole.
- The disk was screwed to the flange.
Side view.
The tank has been redone. A “reflector” was attached to it to throw the corn “cobs” into the bucket.
Inside view.
Grass cutter-corn sheller assembled.
In order for the soil at your dacha to remain fertile, you need to add organic matter to it yourself. Mulching with grass, cut tops and any plant waste is one way to keep the beds in good condition. The grass can be spread on the ground immediately after mowing or pre-composted. To make the greens decompose faster, you need to chop them. It will be convenient to cut plants into small pieces using special device– a homemade garden herb shredder.
- a hole is drilled in the center of a knife made of a metal strip;
- the knife is placed on a metal rod;
- the end of the rod is fixed in the drill head;
- screw a nut onto the free end of the rod so that the knife does not fly off;
- the knife is lowered into the bucket and the drill is turned on at high speeds - at low speeds the grass will not be crushed, but will be wound up.
- 1. Two rectangular plates are cut out of a hacksaw blade.
- 2. A square hole is punched in the center of each plate.
- 3. Knives are sharpened on a machine.
- some sharp knives fixed to the bottom of a metal container;
- rotating, the knives crush any plant debris;
- waste material exits through a side opening.
Show all
Manual chopping
A small volume of raw materials can be crushed using a manual metal chop, placed on a long handle. The cut is a sharply sharpened triangular plate, the longest side of which is directed downwards.
Freshly cut grass, weeds, leaves, tops are laid out on the ground in a layer of 10-15 cm and chopped into pieces. The tool must be lowered sharply. After each blow, the plant mass is divided into smaller and smaller parts.
Electrical accessories
The operating principle of any electric grass cutter is simple. Freshly cut or dried plants are placed in a tank equipped with cutting elements. The knives are driven by an electric motor. After processing, the mass significantly decreases in volume and becomes suitable for use as a feed mixture, mulch or laying in compost heap. Loading and unloading of raw materials from the machine occurs manually.
Factory grass cutters use electric motors of at least 3000 rpm. IN homemade devices You can use motors with a much lower shaft rotation speed. But it should be remembered that the higher the rotation speed, the less likely it is that the grass will not be chopped, but will wrap around the knives.
Grass cutter from an electric drill
The owner of an old electric drill can assemble a unit in which greens will be crushed, like in a blender. Place a small portion of green grass at the bottom of a metal bucket or cylindrical tank and turn on the drill with the attached homemade knife. After one or two minutes, all that remains is to pour the finely chopped mass out of the tank.
Manufacturing scheme:
Shredder from a Typhoon vacuum cleaner
The plastic body of the Typhoon vacuum cleaner is suitable for making a grass cutter hopper. The device with a body made from a vacuum cleaner works on the same principle as the previous ones, but has more high performance and presentable appearance. Raw materials are fed into the bunker from above. The finished cut exits through the side opening. To prevent the grass from flying away different sides, put a protective cover on the outlet hole.
The entire structure is placed permanently, secured to a frame made of metal corner. The base of the electric shredder must be as stable as possible - this is required condition engine safety. The unit body is attached to a metal stand with bolts. For additional protection electric motor can be sheathed on the frame sheet metal, attaching it with self-tapping screws.
A pair of knives is made from two old hacksaws and secured to the bottom of the hopper on a sleeve turned on a lathe. Sleeve length 40 mm. To power the knives, you will need a 180 W electric motor removed from an old washing machine. The electric motor pulley is secured with studs under the hopper. The knives are secured with an M32 nut. The thread on the bushing is cut during its manufacture. The electric motor pulley is ground with a grinder, making areas on it for fixing the bushing.
Knife making:
The diameter of the hole is selected so that the knife fits tightly onto the motor shaft. The width of the knife depends on the hardness and thickness of the blade.
Grass cutter-grain crusher from a grinder
This device is a “three in one” device. It allows you to grind any vegetable waste(except for thick branches), crush grain, chop root vegetables. Fresh grass passed through the machine can be used for mulching or placed in a compost heap. Chopped root vegetables, cabbage heads and grain are fed to farm animals.
To set the knives in motion, you will need a grinder with a power of 1.5 kW. Knives are made from saw blade on concrete, from which excess parts are cut off, leaving a cross-shaped structure. The opposite knives are slightly bent - one pair up, the other down.
A shallow welded casing is attached to the body of the angle grinder, in the side of which there is an outlet hole. A durable polypropylene bucket is placed on the casing (you can use a container from water-based paint).
To obtain chopped plant mass, a polypropylene bucket is filled to the top with raw materials and closed with a lid. A bag is placed over the outlet hole into which silage or crushed grain will be poured. Then turn on the grinder. If you make a hole in the lid of the bucket, the process can be made continuous - serve portions of raw materials on top, which, after grinding, will be poured into a substitute bag. The whole process is similar to chopping meat in a meat grinder, only the knives rotate not in a vertical, but in a horizontal plane.
Homemade shredder with a washing machine motor
Scheme of operation of the device:
To rotate the knives, a drive from an activator washing machine of the “Malyutka” type, mounted under the tank, is used. The drive rotates two cross-shaped knives made of circular saws for sawmill. For a more detailed examination, you can refer to the drawing.
A grass cutter for chopping grass and tops is very necessary on the farm. True, the factory one is not cheap. But if you have the materials and skills to work with metal, it can be made in a home workshop for a subsidiary plot.
I offer a simple option that I have been using for many years. To make a grass cutter with your own hands, you will need some that are lying under your feet. required material, welding, turner and also consideration.
Do-it-yourself grass cutter work progress
■ Cut out ring 1 from a gas cylinder the right size, and from steel sheet 3 mm thick - cover 2 of slightly larger diameter (Fig. 1). We press them together with clamps and weld them from the inside. We clean the outer protrusions of the resulting casing with emery.■ On a lathe, we make a hole 4 in the cover for the knife shaft 6 and make markings for the clamp 3.
■ Cut out a ring for the clamp from the pipe, weld jaws to it, drill into them through hole d 7 mm for bolt 7. Then we cut the ring between the jaws and, installing the clamp on the grinder, insert a metal spacer between them. We clamp the bolt, allowing the clamp to move freely along the angle grinder. Then we weld the clamp to the circle (according to the markings), leaving 1/3 of the circle free near the jaws.
■ Weld a section onto the casing of the grass cutter pipes 5, cut out a hole inside using electric welding, and clean the edges with a grinder.
■ We make the knife from a saw blade, sharpen it, burn a hole by welding (we don’t recommend drilling, it will ruin a lot of drills) and widen it with emery attachments (Fig. 2). We install it with the cutting edges up.
■ We put the finished casing with a knife on the electric motor shaft.
Note
During operation, fix the grass cutter over a bucket or other container. If desired, it can be secured with clamping bolts or clamps.
For convenience, you can select a container for chopped grass according to the size of the grass cutter lid. This will prevent cut grass from spilling out of the cracks.
How nice it is to stroll through your own garden, along its beautiful paths, admire the well-groomed beds and flower beds, and then eat a rosy apple straight from the branch. But in order for all this splendor to exist, a lot of work has to be done. In order for the soil to be fertile, it is necessary to add a lot of organic matter. Mulching with grass is a great way to keep the soil in good condition. It can be spread out on the beds immediately after mowing or pre-composted. In order for thick stems of greenery to decompose more actively, it is recommended to chop them first. You can make your own herb grinder or just buy one.
The choice of finished equipment largely depends on the volume of raw materials to be ground. After all, ground grass is needed not only to fertilize the soil. It is also useful for those who have a subsidiary farm: chopped greens are added to the feed of livestock and poultry. A small amount of work can be easily handled with a regular saw. This is the name given to a triangular plate equipped with a durable and sharply sharpened lower edge.
A chopper is a basic tool for chopping grass. If the amount of work is small, then you don’t have to buy or build a gasoline or electric grass cutter. Place the cutting on the cutting and get to work
To work, the chaff is placed on a long stalk. It allows you to avoid bending over while doing work. The raw material to be chopped must be spread on the ground in a layer of 10-15 cm. The surface should not be hard, and the layer of grass should not be too large. Then the cut will not become dull and will not spring back. When the chopper hits from top to bottom, the grass is cut into small pieces.
If the volume of greenery being processed is large enough, you need a solid unit, which this video will help you choose.
Methods for making the unit yourself
The main purpose of this article is to find ways to independently manufacture the equipment that will be needed on the farm. If you have the desire, patience and minimal skills, you can make a homemade herb grinder that will work just as well, and perhaps even better, than a store-bought one. Better, because only you yourself know the needs of your farm and can perfectly adapt the device to your own needs. It will be exactly what you need!
Option #1 - a drill to help you!
An excellent grass cutter can be very easily built from a regular drill. Exactly how this simple device works can be seen in the video below.
So, the grinding process resembles the work of a food processor: in a cylindrical body, the role of which is played by a simple bucket, there is a sharply sharpened knife. When it rotates in a circle at high speed, the grass is cut. To make this grass cutter, a two-mode Temp drill with a power of 850 watts is used. The knife is made of hacksaw blade. The whole secret is hidden in sharpening the knife. If done correctly, the grass will not wrap around the blade. The knife should remain clean and free of greens.
Sharpen the knife with a one-sided sharpening. It should be oriented with the sharpened plane facing down. If you have to chop fresh grass, the best shape of the knife would be a narrow diamond so that the cutting edge disappears at an angle to the edges. As a last resort, you can round the blade towards the tip. Then the grass, which is affected by centrifugal force, slides along the cutting edge of the knife straight to the edges. It cuts easily and never wraps around the knife.
Option #2 - for owners of the Typhoon vacuum cleaner
The working principle of this device is no different from the previous one. It just looks more civilized and its performance is higher. If in the previous case the grass was already in the container where the cutting tool was placed, now the raw material is supplied through the upper hole, and the finished substrate comes out through the lower one, located in the side of the apparatus. To prevent the finished silage from being scattered when spilled, you need to use a protective cover for the outlet.
Perhaps such a grass cutter does not look as presentable as a purchased one, but it is functional and practically free. Decide what is more important to you
The chopped grass is collected in a bucket, which must be carefully placed under the outlet. It is clear that when choosing the height of the racks for the unit, it should be taken into account that a bucket of normal parameters must pass freely in order to place it in the right place. So what does Typhoon have to do with it? The body from the old Soviet Typhoon vacuum cleaner is ideal for a basic garden grass shredder: it has an upper hole of the most suitable size. I repeat once again: this is an ideal option. But not the only one!
Any cylindrical container, be it an old pan, bucket or piece of pipe, will also work. The 180-watt motor can be borrowed from an old washing machine. An old hacksaw blade will be used for the knives, and it is recommended to use a 15x15 mm rectangular profile as stands. The bushing, 40 mm high, on which the knives will be attached, will have to be turned on a lathe.
The process of making a herb grinder is not as complicated as it seems. In the photo: No. 1 - the body, very convenient, because you can load grass into it from above, No. 2 - the motor from the washing machine, No. 3 - the location and appearance of the knives
The engine with the pulley removed is mounted on studs from below to the container. To tighten the knives, water nuts 32 mm in diameter are useful. When making bushings, be careful to cut threads for these nuts. Don't forget about the hole for the motor shaft. To ensure reliable fixation on the shaft, two holes of 7 mm in diameter are made in the bushing with M8 threads cut into them for locking bolts. Pads are machined on the reverse side of the motor shaft to increase the reliability of the bushing being secured with locking bolts.
At a height of 15 mm in the upper part of the cylinder, the edges were removed with a grinder to form a square with a side of 25 mm. Knives will be put on him. To make knives, you need to cut 4 blanks from a hacksaw blade using a grinder. A square hole with a side of 26 mm is cut out in the central part of each workpiece. The width of each part depends on the degree of rigidity of the original metal. It is clear that the knives should be placed closer to the bottom. Their cutting edges are sharpened using a sharpener. The bolts securing the sleeve are placed above the knives.
In the photo: No. 4 is a bushing for securing the knives and connecting the engine to the body, No. 5 is a square on which the knives will subsequently be attached, No. 6 is the chopper platform, which is made in the form of a truncated pyramid
If it is not possible to make an outlet for the silo directly under the knives, then it will be equipped on the side. To do this, you can use a grinder to make a 7x7 circle. Tin is used to form the guide body. The housing is attached to the chopper with M3 bolts. The platform of the unit must be as stable as possible. To do this, its base is made larger than the top. It has to be made as functional and convenient as possible.
The purpose of the platform is not only to support the chopper, but also to protect the engine. It is secured to the container with 3 M 6x45 bolts. It is better to cover the side edges of the platform with sheets of tin. The racks are threaded for M3 bolts, with which the sheets are secured to the platform.
Option #3 - grass cutter from what was on hand
Armed with the knowledge gained from reading the description of the manufacturing process of the previous unit, you can build yourself something equally simple and useful without much difficulty or effort.
This grass cutter is literally made from something you found in the shed. All things have served their purpose long ago, but in this design they will certainly be useful to their owner for a long time
For basic grass cutting you will need:
- Agidel pump or any similar electric motor capable of 3000 rpm and powered from a 220V network;
- old aluminum pan;
- used wood hacksaws, from which you can make wonderful knives;
- to start the engine you need a button, the role of which will be perfectly played by the NVD from the washing machine;
- plug and power cord.
We invite you to carefully examine the photographs, because they do not need any special comments. Everything is very clear. Start creating your herb grinder and you'll do great.
Pay attention to how the blades are placed in this herb chopper. It is possible that you will choose this particular model
The motor is installed under the pan, and the start button is located at the rear of the platform to make it easier to reach.
Such grass, chopped using a grass cutter, is perfect for feeding livestock and poultry, as well as for mulching purposes.
Option #4 - homemade straw cutter
Three previous units successfully turned grass into silage. But if we need a chopper not only for grass, but also for hay, it’s worth taking a closer look at another invention, which is presented in great detail in the video below.
A Few Safety Warnings
Any device, the creation of which is described above, is equipped with sharp cutting parts. To ensure that it serves you for a long time, brings relief in your work, and does not cause injury, follow basic safety precautions when performing work.
If the operation of the unit involves electricity, be doubly careful and take the necessary measures. Be especially careful that children do not try to operate the grass cutter. It's better to overdo it than to underdo it!
Related Posts
