Despite the fact that the kettle is a simple household appliance, it requires care. When using an electrical appliance inner covering and the heating element are covered with scale, which leads to the following consequences:

1. Breaking heating element.
2. Reduced thermal conductivity of the metal of a household appliance.
3. Reducing the service life of the electric kettle.
4. Excessive electricity consumption.
5. Premature wear of an electrical appliance.
6. Adverse effects of scale on the human body (deterioration in the functioning of the urinary system).

Let's look at how to clean Electric kettle from scale and prevent its occurrence.

The best way to protect against scale

The key factor influencing the formation of deposits on the kettle is an excess of magnesium and calcium salts, which leads to increased water hardness. Special flow filters with softening cartridges help reduce the concentration of magnesium and calcium salts in water, solve the problem of its hardness and prevent the formation of deposits in electrical appliances. Using water purifying filters helps prevent limescale in your electric kettle.

An effective technique is to regularly (at least once a month) clean the container of deposits and rinse it periodically cold water. These measures will help keep your electric kettle clean.

To electrical appliance remained clean, you should pour out the water remaining after boiling and rinse the device before boiling a fresh portion.

At home, it is recommended to install an electromagnetic water converter, which will help reduce its hardness and prevent the appearance of deposits on electrical appliances, washing machines, and water heating tanks.

7 most effective descalers

Since descaling a kettle at home is not always easy, let’s consider the most effective means to help solve this problem.

Lemon acid

To clean the kettle with citric acid you need:

• pour a heaped tablespoon of acid with water;
• bring the mixture to a boil;
• wash the electrical appliance;
• boil another 1-2 portions of water, pour it out;
• repeat the procedure several times to remove any remaining scale.

Soda

To descale a kettle with soda you need to:

• pour a tablespoon of soda with water;
• bring the resulting mixture to a boil;
• rinse the container;
• When deposits become soft and loose, remove them with a dishwashing sponge.

Salt and soda

Required:

• pour 2 tablespoons of soda with water;
• add a tablespoon table salt(with a slide);
• boil the resulting mixture;
• For better removal If any deposits have formed, leave the mixture in an electric kettle for 20 minutes;
• remove remaining deposits with a dishwashing sponge, which will help completely remove scale from the electric kettle.
• Rinse the device thoroughly.

Instructions

The easiest way is to buy any anti-scale agent in the store and clean it following the instructions. As a rule, such a product costs . But, if you want to protect your health from accidental ingestion of chemicals, it is better to use natural means.

Boil the resulting solution and leave for at least two hours, and if possible, overnight.

After pouring out the solution, rinse the kettle thoroughly with running water and boil again to remove any remaining vinegar and scale.

In addition to acetic acid, you can use citric acid to combat scale - 1 tablespoon per 1.5-2 liters of water. Pour acid into a kettle, pour hot water and leave for 15-20 minutes. It is not necessary to boil the solution. If the coating was not very strong, then after the specified time the kettle will shine like new.

In case of absence from home citric acid and vinegar - don't despair. This may be unexpected, but in past times, grandmothers got rid of it with the help of an ordinary one!

Take clean potato peelings, cover the bottom of the kettle with them and add 1.5-2 liters of cold water.

Drain the cooled water and rinse the kettle well with tap water.

If you are still unhappy with the result, try another very extravagant remedy.

Use a special pencil to remove scale. Heat the iron to 100°C, apply the product evenly to the sole and leave in this state for several minutes. Then delete scale cotton fabric. Fill in clean water and clean the holes with steam.

Remove scale from the iron with table vinegar. Prepare a solution of 1 glass of water and 1 tablespoon of vinegar. Pour liquid into the iron and turn on the steam function.

Clean the washing machine from scale with a special product, such as Antiscale. You can buy it at a hardware store. Before use, read the instructions or consult the seller.

Pour the product into the washing drum, set the mode at a temperature of 60-90°C. To prevent scale formation, carry out a similar procedure regularly - once a month. If your city or area has poor water quality, do preventative maintenance every .

Tip 4: How to descale a kettle using improvised means

Scale in water appears due to the presence of a large amount of salt and impurities in it, which settle on the bottom, walls and heating element of the electric kettle. If not done in time, this may cause rapid breakdown, or the process of heating the water will take longer. At the same time, scale affects the body negatively, destroying the kidneys and genitourinary system.

The easiest way to remove scale is using citric acid. To clean scale, you need to buy one sachet of food-grade citric acid. Pour acid into the kettle. Dial into it cold water and leave for several hours. Then pour everything out of the kettle, add fresh water and boil several times.

If citric acid does not cope with the scale, then pour an additional 100 g of 9% vinegar into a kettle with water, then boil this mixture, pour it out and rinse the kettle thoroughly.

Fanta, Sprite or Cola carbonated water is suitable for descaling. You need to remove the gases from them, fill the kettle 1/2 full and boil.

Potato peelings along with apple peels will also work. They should be washed, put in a kettle with water and boiled several times.

If the kettle has a large amount of scale, you can do the following procedure: Pour a full kettle of water, add 1 tablespoon of soda and boil for 30 minutes. Change the water, add 1 tbsp citric acid and also boil for 30 minutes. Change the water, add 150 g of vinegar, boil. With this method, the scale will become soft and must be removed with a sponge.

Video on the topic

Tip 5: How to clean a kettle from of stainless steel from scale

Lime deposits in water not only make it hard - when boiling, substances settle inside the kettle, forming scale on the walls. Depending on the material of the kettle, scale will form on it less often or more often.

In stainless steel, scale forms somewhat more slowly. But it is still not possible to completely avoid it. Scale slows down the process of boiling water, and if it does, then a lot of electricity is consumed. Deposits can harm not only the kettle, but also the person who drinks the water boiled in it. Filters installed on the spout do little to solve the problem.

Preventing scale formation

The best way to combat scale is to prevent its formation at all. The rules that must be followed for this are quite simple. For boiling, you need to use soft and clean water, passed through a filter or settled. You need to boil a portion of water once. Water that has already boiled should not be heated - it is better to replace it with fresh water. Before each use, it is advisable to rinse the kettle well from the inside, rinse it to remove any white flakes that form, and clean the walls of the kettle from plaque more often.

Means that can be used to remove scale

In hardware stores you can buy quite effective anti-scale products, such as Silita and Antiscale. Their use is almost the same: basically, you need to pour the product into a kettle, add water and boil it. After about fifteen minutes, the kettle needs to be rinsed clean water.

If a reddish scale forms during boiling, citric acid will help. But it is better not to use it for enameled ones. Prepare a solution from a liter of water and a teaspoon of acid, boil it. Leave for 10 minutes and boil again. If the plaque still remains, after the second boiling there is no need to drain the water - it is left in for another couple of hours.

You can clean a stainless steel kettle with a mixture of vinegar and baking soda. Suitable for those who can easily tolerate the smell of vinegar. Mix soda with water to a paste and rub into the walls of the kettle. After this, moisten a cloth with strong vinegar and wipe over the pulp. Baking soda and vinegar react very easily.

Scale can be removed with carbonated water - Coca-Cola or Sprite. The liquid should be poured into a kettle, boiled and left for about 10 minutes. Then drain everything and rinse the kettle. For a teapot white It is better to use sprite - so that the dye does not spoil the whiteness.

Whatever product is chosen - soda, carbonated water or specialized household chemicals - descaling must be done regularly. Then cleaning is much easier, and scale will form much less.

Tap water that is poured into a kettle contains a large amount of different salts. They gradually settle on the inner surface and bottom of the kettle, resulting in the formation of scale. It must be removed regularly - there are a lot of means for this, and you can choose any convenient way.

You will need

• - household chemicals for descaling;
• - vinegar;
• - baking soda;
• - lemon acid.

Instructions

Pour a special descaling agent into the kettle. This could be “Antinscale”, “Antinscale” or other household chemicals with a similar effect. They are very easy to use - you just need to add water and boil them. This method can be called the easiest, but at the same time it is far from the most useful. Cleaning products contain many chemicals that may remain partially in the detergent even after repeated rinsing. Getting them into the stomach poses a danger to the body.

Try descaling more in a safe way– using regular . Boil water, add three tablespoons of soda to the boiling water. After this, the water should cool down. After about half an hour, boil the kettle again. Pour out the boiling water and fill the kettle with hot water with a couple of tablespoons of vinegar essence added. Boil the water again and cool the kettle. After these activities, the scale becomes loose and is very easy to remove with a regular dishwashing sponge. This method is good for neglected ones. No matter how thick the layer of scale is, it begins to come off in thin sheets.

Take citric acid - two bags are enough for a standard three-liter kettle. Pour the powder into cold water and boil. Leave the water in the kettle for about half an hour, then drain, add fresh water and boil again. The acid will easily break down the scale. After this, the kettle will need to be rinsed thoroughly so that no aftertaste remains. This method is perfect for descaling both in simple and cold conditions. But for metal teapots citric acid is contraindicated. In the process of dissolving scale, acid makes it rough. inner surface kettle, and new scale will form in it much faster. Citric acid will not cope with a thick crust of scale.

At the moment, the electric kettle has become a decoration of the kitchen and an indispensable assistant However, due to repeated use, problems such as scale may arise. If scale is not removed, it can cause an unpleasant taste in the water and can also lead to damage to the electrical appliance. In order to remove scale from your electric kettle, you can use the following tips.

A coating forms on the heating element of the kettle and its walls, which is ordinary salt deposited on the surface. Before cleaning, you need to figure out what is causing the limescale deposits. Sometimes the problem is the quality of the water: then it is necessary to replace it with a better one.

In order to remove scale, you will need the simplest products that most housewives have in their kitchens.

1. You will need 2 tablespoons of vinegar and 50 g of citric acid: pour vinegar into the kettle and then add lemon, boil the kettle and leave it with this mixture for 60 minutes. After the specified time, the plaque can be easily washed off with a sponge. If plaque remains from the first time, you can repeat the procedure. Sometimes lemon is used instead of citric acid.

2. Soda is an excellent way to clean an electric kettle. First, pour water into the kettle, then add 1 tablespoon of table salt, boil the water and leave for 30 minutes, then pour water into the kettle again, add 0.5 teaspoon of citric acid and put it on the fire again. After the water has cooled, you can start washing the kettle. kitchen sponge.

3. Vinegar also helps to clean an electric kettle: pour a third of vinegar and two parts of water into the kettle, then boil the water and leave it to cool. The scale in the kettle will dissolve under the influence of acid, and then it can be easily washed.

4. One of the most unconventional cleansing methods is to use regular carbonated water. Pour water into the kettle, bring to a boil, and then drain. After this manipulation limescale must leave.

5. Keep in mind that stores have a large number of household chemicals for cleaning limescale. Sometimes such means are quite expensive, and the result is not so effective, so you can use methods.

Consider the following points:

1. After cleaning the electric kettle, it must be rinsed, otherwise the substances you used for cleaning may enter the body along with drinks.

2. The most the best remedy in the fight against scale - this is daily care behind your electric kettle.

Video on the topic

It is not easy to find a house where there is no kettle - regular or electric. Since many of us use mostly hard water for boiling tap water, then it’s no wonder that sooner or later this container becomes overgrown with scale from the inside. Plaque is not only aesthetically unattractive, but also harmful to health - its microparticles end up in your mug of tea or coffee. And an electrical device may well fail due to such growths. Therefore, today we will talk about how to descale a kettle quickly, efficiently and in simple ways. Let's look at the most popular!

Why does scale form and why is it dangerous?

In metal, glass and enamel teapots we see growths on the internal walls and bottom, in the electric one - mostly on the heating element. The reason for the formation of scale is the salts in which it is so rich tap water. Accordingly, the harder the latter, the more intense the formation of limescale build-up. Special filters will not help here either - they only soften the water a little, but do not completely deprive it of salts.

It is very important to descale your kettle at home. Here are the risks of ignoring the problem:

• It is scale that causes the destruction of the walls of conventional kettles and the premature failure of electric ones. Build-ups on the heating element lead to its overheating, preventing water from directly contacting the metal, heating the latter to high temperatures.
• The use of strainers and filters does not always protect our body from the ingress of scale along with drinks. And it can cause problems with genitourinary system, kidneys.

Method number 1: vinegar

The method is ideal for metal containers. Use with caution in relation to glass and plastic - after all, this is an aggressive product. How to descale a kettle with vinegar:

1. Dilute the substance with water. This is 100 ml of 9% food vinegar per 1 liter of water. If you use vinegar essence (70%), then 1-2 tbsp is enough. spoons.
2. The composition is poured directly into the kettle, which is placed on low heat.
3. Wait until the solution boils.
4. When lifting the lid, periodically watch for scale removal. Usually 15 minutes of boiling is enough for the growths to leave the walls and bottom.
5. Rinse the kettle thoroughly under running water, removing both scale and vinegar residue.

Method number 2: citric acid

But this substance was created for plastic electrical devices. You can also easily wash glass containers with it. Let's look at how to descale a kettle with citric acid:

1. First of all, dilute 1-2 teaspoons of powder in 1 liter of water.
2. The solution is simply poured into the kettle, which you turn on and bring to a boil.
3. As a result of the process, the layer of plastic will be “renewed” - the plaque will easily peel off under the influence of acid.
4. You only need to thoroughly rinse the kettle and then boil the water in it “idle”.

Note that boiling with acid is a last resort. It is best to carry out preventative monthly cleaning of the device. in this case? Dilute citric acid in water in the same amount and leave the composition in the kettle for several hours.

If you don't have acid on hand, a quarter of a lemon can easily replace it.

Method number 3: sparkling water

How to descale an enamel or metal kettle? Use carbonated drinks - Cola, Pepsi, Fanta, Sprite and the like. But this method is not suitable for electric kettles!

By the way, we note that gas water is also capable of dissolving rust and even cleaning car carburetors. But what we will do specifically for the teapot:

1. Unscrew the cap and let the soda sit open for a while.
2. As soon as the gas bubbles stop rising, pour the drink into the kettle about halfway.
3. Now it remains to bring the liquid to a boil.
4. Finally, we thoroughly rinse the container to remove any remaining scale. That's all.

By the way, if you intend to clean a snow-white or light-colored teapot with soda, then it is better to use a colorless drink for these purposes - for example, Seven-Up, Sprite. "Pepsi" or "Fanta" can leave their characteristic shade on the walls of the container.

Method number 4: soda + citric acid + vinegar

Let’s say right away that the method is for the most severe and advanced cases. It should not be used for electrical devices at all.

How to descale a kettle here:

1. Pour water into a container, add 1 tbsp. spoon of baking soda.
2. Bring the solution to a boil, then drain it.
3. Fill a container with fresh water. We will already dissolve citric acid in it - 1 tbsp. spoon. We will simmer over low heat for half an hour. The composition is merged again.
4. Refill the kettle with fresh water and dissolve 1/2 cup of vinegar in it. Boil again for half an hour and drain.

In most cases, this three-step procedure is enough for the scale to gradually disappear on its own. One way or another, even if left, it will become pliable and soft. Therefore, you can easily remove it with a regular soft dish sponge. But we strongly recommend that you do not use metal or hard brushes or sponges for cleaning teapots.

You can use a slightly different version - vinegar + soda:

1. Fill the kettle 2/3 full with water.
2. Add baking soda at the rate of 1 tbsp. spoon per 1 liter of water.
3. Boil the mixture for half an hour.
4. Discard this solution.
5. Add fresh water, stir vinegar in it - 1/2 cup per 1 liter of water.
6. Boil again for half an hour.
7. Drain the solution and rinse the kettle thoroughly.

Method number 5: soda

This method is equally good for both enameled and metal containers. You can descale your kettle with baking soda like this:

1. Fill a container with water and add 1 tablespoon of baking soda.
2. Then we put the kettle on the stove and bring it to a boil over low heat.
3. So the solution is boiled in it for another half hour.
4. Then we drain the composition, rinse the kettle, fill it with clean water and send it to boil again. This step will allow us to remove any remaining soda from the inner walls of the kettle.

Method number 6: brine

Quite an unusual folk method. How to descale a kettle using a solution for preserving tomatoes, cucumbers, squash and other tasty pickles? The scheme is similar:

1. Pour the brine into the kettle and place the container on the fire.
2. Bring to a boil.
3. Boil until the scale begins to move away from the walls.
4. Rinse the kettle thoroughly after cleaning.

Why is brine so good? The fact is that it contains citric acid, which helps remove limescale deposits. By the way, brine does an excellent job of removing rust from iron salts in the same kettle.

Method number 7: potato peelings

We also hasten to introduce you to a waste-free descaling method - potato peelings. But we note that it will only cope well with slight growths on the walls of metal and enamel teapots.

Here's how we'll do it:

1. Potato peelings First of all, you need to rinse thoroughly to remove dirt.
2. Place them in a teapot and fill with water.
3. Place the container on the fire and bring the brew to a boil.
4. Remove the kettle from the stove and leave to steep for several hours.
5. Then pour out the cleaning water and rinse the container thoroughly.

And also, a note to the housewife - do not rush to throw away the peelings of apples or pears. If you brew them according to similar instructions, you can get rid of a small whitish salt scale on inside containers.

Special means

As you can see, you can easily descale a kettle using improvised means that can be found in almost every home. However, in our article we will not ignore special substances that effectively cope with the problem.

The recognized leaders will be “Cinderella” and “Antinakipin”. Use according to instructions. It is no different from what we described above - the product is also added to the water, after which it is poured into the kettle and boiled. At the end of the procedure, the container is thoroughly washed from chemical preparation.

After cleaning...

So we figured out how to descale a kettle. No matter which method you used, after cleaning we recommend that you do the following:

1. Rinse the inside of the container thoroughly.
2. Boil water in a kettle once or twice “idle”, not for drinking.

The fact is that not all cleaning products used will be useful if they enter your body along with tea or coffee.

Prevention of the problem

The methods we have presented are quite simple and effective. But it’s still better to prevent a problem than to fix it. Therefore, we present to your attention several effective recommendations that will help you encounter scale in your kettle quite less often:

1. Don't forget about preventative cleaning. It should be done at least once every 1-2 months. Gentle means such as brine, peeling apples or potatoes are suitable here.
2. Get a water filter. Although it will not rid the liquid of all impurities, it will significantly reduce the amount of salts in it. This means that much less scale will form.
3. As soon as you have finished drinking tea, pour out the remaining water at the bottom of the teapot. Don't forget to rinse the container before adding fresh water.
4. A good option- purchase bottled water. Or, if possible, use spring or melted water.

Now you know how to quickly and effectively descale a kettle. We also advise you to listen to preventive recommendations that will help you encounter this problem as rarely as possible.

Someone noticed that the kettle, like the stove, by the way, is the face of the hostess. Therefore, each of us should know how to descale a kettle.

Where does scale come from?

Drinking water contains a huge amount of minerals and salts. No matter what folk methods or modern filters you use to clean it, even a small percentage of various impurities still remains. When sodium and magnesium salts are heated, they form a limescale that eats into the walls of the cookware and does not want to leave it voluntarily.

This plaque covers any type of material, so all housewives have to clean their teapots.

Why get rid of scale

• Limescale has low thermal conductivity, causing water to boil more slowly.
• If the kettle is electric and you are too lazy to clean it, the deposit will quickly damage the heating element.
• Due to scale, water becomes tasteless. And if it boils for a long time, it will also become cloudy.

Effective ways to combat scale

How to clean a kettle using simple remedies, which can be found in every home.

Hit the scale with citric acid

1. Fill a full kettle of water, add 1-2 sachets of citric acid (depending on its volume and thickness of the scale). Boil it.
2. Let the solution cool slightly, in the meantime the acid will have time to eat away the plaque as much as possible. Drain the liquid.
3. Boil water with citric acid again. Drain the liquid again and rinse the kettle thoroughly.
4. You can replace citric acid with vinegar - 100 grams per liter of water.

Removing a thick layer of scale

If the citric acid solution does not give the expected result, try another method:

1. Dissolve 2 tablespoons of baking soda in 1 liter of water. Pour this solution into a kettle and boil for about half an hour.
2. Drain the resulting liquid. Pour water and add a tablespoon of citric acid, boil.
3. Pour water with vinegar a third time (the thicker the layer, the more vinegar), boil for 30 minutes.
4. After such triple treatment, the scale becomes soft and easily comes off the walls. Remove it with either a kitchen sponge or a wooden spatula. Rinse the kettle thoroughly, to be safe, boil clean water and pour it out.

Trying to clean with Coca-Cola

1. Before use, release all gas from the drink.
2. Fill half the kettle with Coca-Cola and boil.
3. Pour out the contents and rinse.
4. Some claim that Fanta and Sprite are also suitable for this purpose.

Is your kettle sparkling clean again? Isn't it time to drink some fragrant tea? Have a nice tea party and pleasant conversation!

Often, to prepare hot drinks, a kettle is boiled running water, which has high hardness due to salt impurities. When heated, salts precipitate, which is deposited on the walls of the container, forming a dense coating after some time. In this article we will look at how to descale a kettle at home.

If the dishes are not cleaned, scale prevents the water from heating, impairs the cooling of the heating element, which leads to overheating and increases the risk of failure of the device.

When systematically introduced into the human body, salt deposits lead to the development of various diseases, including gout, osteochondrosis and stones in the urinary system, so regular cleaning of the kettle is required. How to perform the procedure correctly and safely?

Safety precautions and preparatory stage

• Do not use synthetic preparations used for cleaning washing machines. Only products designed for kitchen equipment and appliances whose surface comes into contact with food are suitable. Chemical substances and abrasive preparations may end up in drinking water, since they are difficult to remove from plastic and metal elements.
• To clean the outer surface you can use household chemicals without abrasive inclusions. It’s better to forget about metal sponges or brushes.
• Before cleaning the kettle, unplug the appliance and let it cool. To prevent sediment from getting into the drinking water, the kettle is equipped with a filter. It is located in the spout and also requires cleaning.
• Do not immerse the appliance in water or any other liquid for cleaning.

Folk remedies against scale

If the kettle is covered with too much scale, then not all means will help achieve the result the first time. However, you shouldn’t be upset, there are effective traditional methods, which cope well with plaque and cost practically nothing.

Vinegar

To prepare the solution you will need 9% table vinegar and water. Fill the kettle with ⅔ of the water maximum level. Then add vinegar to the max mark. Boil the solution, then leave to cool.

If 9% vinegar is not found, use vinegar essence (70%). Pour water into the kettle up to the max mark, then add 2-3 tablespoons of essence. Work with the product very carefully, avoiding contact with mucous membranes, so as not to cause a chemical burn.

Finally, rinse the device thoroughly with water. If it was not possible to remove all the scale the first time, repeat the procedure. The disadvantage of the method is Strong smell vinegar (especially in the case of essence), so the room should be well ventilated.

Video tips

Lemon acid

The solution is prepared at the rate of 10 grams of citric acid per 1 liter of water. Typically, acid is packaged in 25 gram bags, so a standard kettle will require one bag.

Bring the resulting solution, as in the case of vinegar, to a boil. After boiling, turn off the kettle as the solution may begin to foam intensively. Let the kettle cool, drain the solution, and rinse thoroughly with water. Repeat the procedure if necessary.

Baking soda

If the kettle has not been cleaned for a long time and the layer of scale is large enough, then before carrying out one of the above procedures, you need to boil water in it with baking soda. The solution is prepared at the rate of 2 tbsp. spoons of soda per 1 liter of water. This preparation will give a more active reaction with the acid and increase the likelihood of cleaning.

Coca Cola

The method is suitable for any kettle, except electric. Sweet carbonated water must contain phosphoric and citric acid. Coca-Cola, Fanta or Sprite drinks are considered suitable for cleaning. They clean scale and do an excellent job of removing rust.

Before starting the procedure, open the lid and release the gas from the drink. Fill the kettle to medium level, bring to a boil and leave the liquid to cool. Drain the liquid and rinse the inside thoroughly with water.

Advanced cases require a combination of several methods. A kettle with heavy deposits can be cleaned in the following way:

1. Perform the first boiling with water and soda, drain the liquid, and rinse the kettle.
2. Perform the second boiling for half an hour. To do this, add 1-2 teaspoons of citric acid to the water and after boiling, rinse the container with water.
3. Perform the third boiling with water and vinegar.

At the end of the procedure, the scale will become loose and will fall away from the walls without any problems. After this, thoroughly wash the device again to prevent acid and crumbling plaque from getting into the future drink.

Purchased products and chemicals

If you need to quickly and easily remove scale from your electric kettle, use by specialized means sold in stores. Such remedies are effective and act quite quickly.

• “Antinscale” is commercially available, inexpensive, and quickly achieves the desired result.
• "Descaler" - cheap and effective remedy.
• “Major Domus” is a proven product in liquid form, but unfortunately, it is not available in all stores.

Using anti-scale powders is quite simple: pour them inside the kettle and fill with water. After boiling, drain the water and rinse the inside of the appliance thoroughly.

Non-standard solutions

If you don't have the ingredients needed for cleaning at home, try cucumber pickle. Pour it into the kettle and boil for 1-2 hours. Instead of brine, you can also use whey or sour milk.

On the Internet there is a method of peeling apple peels. Only sour apples are suitable, the peels of which are filled with water and boiled in a kettle for an hour.

After the procedures, the kettle is thoroughly washed.

The best way The solution to the problem will be to prevent the appearance of scale.

• Use a sponge to remove a thin layer of scale from the inside surface after using the kettle 1-2 times.
• Boil pre-filtered water.
• Do not leave boiled water in the kettle for a long time; pour out the excess immediately.
• Carry out descaling monthly to prevent the deposits from becoming too thick.

Cleaning and preventative procedures will protect the kettle from scale, extending the life of the heating element.