Ideas for a garden made from large plastic bottles. DIY crafts from plastic bottles. Bottle gazebo

A plastic bottle is not just ordinary waste (garbage), it is a decorative option, if used skillfully. Bottles, depending on the liquid stored in them, vary in shape, color and size. These features will allow you to make interesting crafts from plastic bottles for a do-it-yourself dacha.

Massive buildings

Plastic bottles are used in this case as a substitute for various materials of various designs. They can replace bricks and even slate. To provide the necessary strength, the bottle is covered with sand, and in order to achieve a certain shape, pressing and scissors are used.

Gazebos, greenhouse buildings

The essence of the building is PVC installation products using fastening materials in the form of wires or ropes. Ultimately, when using sufficiently strong frames, decent supporting walls for any structures emerge.

Enclosing elements

The principle of the craft is the same as in the point described earlier. It is also possible to decorate an existing fence or gate using plastic bottles, cutting them, and gluing mosaics.

Awnings

The structure can be used by you as a shelter from the rain. You can hide not only yourself, but also leave your car or equipment behind. To build it, you need to install a strong frame onto which bottles are attached using wire.

Water heater

With proper construction and combination of containers, you can make an outdoor shower, the water of which will be heated in bottles under the influence of sunlight.

Plastic furniture

Using bottles you can make outdoor benches, chairs, and even sofas that can be upholstered for greater comfort.

Shades for lamps

Use bottles made of heat-resistant plastic. You can make a lampshade of any shape and color, depending on the design of your summer cottage and the requirements.

Flower pots

Usually bottles act as containers used for initial planting, but with skillful processing you can get beautiful pots and flowerpots.

Flower beds made from plastic bottles

By subjecting the bottle to physical processing in combination with other fastening materials, for example, stones, you can mount an exquisite flower bed and, if necessary, paint over the resulting products.

Birdhouses

Hanging products from bottles for bird feeders are made with just a couple of cuts in the base of the bottle. With additional processing, the feeder can look quite aesthetically pleasing.

Home decoration

All kinds of animal shapes, lanterns and even curtains can be made with a skillful hand.

boats

With a certain number of bottles and a couple of video lessons, you can make your own boat and go fishing.

Playgrounds for children

It is possible to cut out figures, slides, for plant lovers - artificial palm trees, flowers and much more.

Children's slide made from bottles

Installations for land cover

Figures of animals, aircraft and much more. The most popular crafts and instructions for making them are described below.

Swans-pots

In order to make an original design in the form of a swan, we need a certain number of large bottles (5-6 approximately, depending on the size of the bird), as well as:

wire made of copper or any available metal;
putty (finishing);
metal grid;
tight-fitting material (bandages, gauze);
knife (for shaping);
spatulas of various sizes.

Swan from bottles

Step-by-step production:

Cut a large bottle lengthwise, do not try to make two identical halves, this is completely unnecessary for the craft. The approximate shape resulting from such an operation should resemble a voluminous flowerpot. Next, add wet sand in order to achieve the desired deformation of the bottle.
We attach the wire to the lid, having previously made a hole in it. To make this process easier, you can use a heated nail or hand drill. The wire will become the bird's neck in the future. We throw the diluted putty onto the prepared polyethylene bedding in a layer of 5-6 cm. Place the bottle of sand discussed in the previous paragraphs on the resulting kind of foundation. Using a spatula and mortar, shape the swan's body into the required shape.
Give the wire a curved shape, reminiscent of a neck. Attach knurled ovals of putty to the wire and secure everything tightly with gauze or bandage. The transition from the base of the swan to the neck should not be abrupt, otherwise the design will not be aesthetically pleasing. At the end of the wire, make a head out of putty by adding eyes and a beak.
We attach the metal mesh to the body using a solution and get wonderful wings. The solution is applied to the mesh and the result should be wings of the shape you choose. The process is quite painstaking, so be patient and strong. Using spatulas, create the curves of a swan.
After drying, sand the resulting product with emery cloth. The next step is to prime the bird and paint it, not forgetting to draw all the attributes of the swan's face.

cacti

Enough original idea and very easy to install. Using wire, we make the base of the cactus and fix it in the ground. Afterwards, we put on the bottles of the required shape and color.

Cacti from plastic bottles

Flowers

To make plastic flowers we need to have:

knife and scissors;
bottles of the required shape and color;
paints and varnish for finishing work.

Step-by-step manufacturing instructions:

Cut off the top of the bottle. Next, we make several cuts to the base with scissors. One stripe should be wider than the next three, since it will represent the petal, and thin stripes will play the role of stamens.
Larger strips are cut with scissors, giving them a sharp shape. Thin strips are twisted and bent down using a knife.
Petals - wide stripes are painted with green paint or varnish.
The stand is made from the remaining material by cutting the bottle in half, not reaching the bottom 4-5 cm. The middle of the bottom remains intact. Give the workpiece the appropriate shape and place it on the ground.

Owl made of disks and bottles

Necessary materials:

bottles of different sizes (2 x 5 liters and 40 x 2);
special glue (epoxy);
screws for fastening;
discs and beads for eyes;
knife and scissors;
foam for framing.

Manufacturing instructions

The outlines of the future face are organized by cutting it out of foam plastic; also allocate places for the eyes. Using packaging from button batteries we make eyes. Place the beads inside the empty package and pour epoxy glue into it. After drying, the eyes are attached to the head. If desired, you can glue regular CDs in front of the beads, which will give your eyes a more interesting look.
Having chosen a bottle of a dark color, a beak is cut out of it, which is then attached to the head in Right place. The rest of the bottle is not thrown away; feathers can be made from it. After cutting, the feathers are glued along the back of the eyes. Eyelids are cut out of the remaining plastic, which, when glued, should cover the places where the feathers are attached.
The next step is making the wings. Taking a large bottle, use it to create a frame for the wings; pre-cut feathers from a two-liter bottle are attached to it. When gluing feathers, you must block the neck big bottle. Afterwards, attach smaller feathers in several rows, and use a knife to bend the last row behind the base of a large bottle.
Using the second large bottle, make the base for the owl's body along with the back of the head. The body is covered with feathers in several rows, as are the wings. The part that should not have feathers is the back; the rest is covered with feathers in random order.
Using self-tapping screws, we attach the resulting parts (head and wings) to the owl’s body. Before doing this, cover the back of your head with cutouts from the middle of the bottles. The joints are also covered with feathers. After securing all the parts, paint the owl in the desired color.

bottle pig

Necessary materials:

bottles different sizes(one 5-liter and 4 one and a half liter);
arakal color of future eyes and nose;
nails for fastening;
knife and scissors;
paints or markers;
pen or pencil;
paper.

Manufacturing instructions

One and a half liter bottles are cut diagonally to remove the neck. The cut off part will be used for hooves in the future. Draw eyes, ears and nose on paper. Using a marker, move the drawn outline onto the arkal. The part of the bottle that remains after cutting is used to organize the ears. Cut a tail from any bottle and shape it into a twisted shape using a knife.
After marking the future attachment points for the ears, hooves and tail, use a pre-heated nail to make holes. The parts are cut at the fastening points and at the joints the resulting edges are bent for greater strength.
The last stage is painting the pig. After it dries, glue on the eyes and nostrils. Paint the hooves black. The piglet is ready, you can install it in a flowerbed or anywhere in your summer cottage.

Palm trees

Necessary materials:

bottles desired color(green and brown);
knife and scissors;
copper wire or rod.

Manufacturing instructions:

Cut the bottle in half and make jagged cuts on the top. Prepare as many pieces as possible, as the palm trees must be large.
A metal pin or thick wire is attached to the ground. It is necessary to ensure the reliability of the fastening so that the structure does not fall in the future.
Plastic blanks are strung on a pin and bent for a more natural structure of the palm tree.
Green bottles are needed for branches and leaves. Using scissors, the bottom is cut off, and the rest becomes the required form using cuts. The shape of the leaves can be any, it all depends on your imagination.
The last stage is securing the leaves to the pins and connecting all the parts into general design. In order to fasten everything together, you can use welding or ordinary harnesses, which can be purchased on the shelves of any hardware store.

Flowerbeds

Necessary materials:

cement and sand;
crushed stone or gravel;
tire or barrel cut in half;
bottles (can be glass).

Manufacturing instructions:

Place the blank in the place of the future flower bed.
Prepare a solution (mix cement with sand in a ratio of 1:2, gradually adding water).
Coat the workpiece with the solution (the layer should be quite dense) and insert the bottles with their necks into the solution. When inserting bottles, follow a checkerboard pattern.
After hardening, pour gravel or slag onto the bottom of the workpiece to organize drainage. Afterwards, fill the flowerbed with soil. The structure is ready, now you can plant it with any flowers you want.

Crafts from the bottom (bottom) of a bottle

The bottles are cut (the lower halves are used for work). The color scheme can be any to your taste. After organizing a mound of soil so that it becomes a slide required diameter, blanks from bottles are stuck into it. With a dense arrangement of bottles and the right color, original plastic buildings are obtained.

Ladybug made from bottles

Decorating garden beds

In order not to waste time on solid plastic crafts, you can simply decorate the area by making contours for the garden or paths using plastic bottles. The bottles are cut, the neck is removed to the narrowing point, filled with sand or earth and dug in along the contour of the bed, flower bed or plot.

Decorating a garden bed with plastic bottles

If necessary, the bottles are painted, which gives your frame an even more aesthetic appearance. This type of decor is quite diverse, since it is possible to organize any shapes and colors according to your desire.

Flowerpots

Hanging pots or just mini flower beds can be easily made from plastic bottles. By cutting off the top, we get a straight pot, cutting off the bottom - cone-shaped, or the middle - for hanging models. Afterwards, the workpiece is filled with soil and the plants you need are planted in it. Bottles can be painted or left transparent. You can install pot models along the path or decorate the fence with hanging plant pots.

Bottle fence

Making a fence is, in principle, simple; such a construction is very economical and will allow you to protect the area from the penetration of animals and other unwanted guests. For construction, pins are used, firmly fixed in the ground, on which plastic bottles are strung.

Bottle gazebo

If you have the necessary materials and free time, you can make a gazebo. For the base of the gazebo you will need a lot of wire and rods. The foundation can also be made from plastic bottles filled with sand or soil. If desired, the gazebo can be covered with protective fabric or tarpaulin. The bottle components can be painted and easily replaced at any time.

Trap for bloodsuckers

To make a mosquito trap from a plastic bottle, you will need a two-liter container, which is then cut in half. The upper part is turned over and inserted into the lower one, creating a funnel, and the lower part, in turn, is filled with sweet water. Then the entire workpiece is darkened by painting or gluing. The trap is ready. To attract flies and wasps, you can add a little jam, honey or syrup to the container.

Scheme for making a mosquito trap from a plastic bottle

Scarecrow for moles

For this craft, make three cuts in the bottle and bend the plastic so that you get blades. Place small stones at the bottom of the bottle, and place the bottle itself on a rod buried in the ground. In the presence of minimal wind, the structure will produce sounds that are not tolerated by moles.

Mole scarer made from plastic bottles

Irrigation structures

Bottles can also be used for watering plants in your summer cottage. Uniform watering can be organized in several ways. An option is to cut the bottom of the bottle and bury its neck in the ground. Before burying the neck, a hole is made in the lid, and grass is placed at the bottom of the hole to prevent the lid from clogging with earth.

You can also cut off the bottom of a plastic bottle and hang it over a flowerbed or on in the right area plantings. In this case, watering will be carried out through the neck of the bottle with the lid loosely screwed on. Watering is regulated by tightening the plug more or less.

Crafts from lids

When working with plastic bottles, there may be a fair amount of cork left behind. Using them correctly can give them a second life and help avoid the recycling process.

Curtains made from lids

Organization is very simple, using a drill or thin nail, holes are made in the lids different colors and with the help of fishing line the elements are attached to each other and to the cornice.

Paintings from traffic jams

Having some experience and a sufficient number of caps of different colors, you can make wonderful decor any surface.

When working with bottles of any size or color, make sure they can withstand weather your climate region. Before carrying out any operations, take care to remove the labels from the surface of the bottle.

Conclusion

Plastic bottles and caps do not have to be thrown away after their direct use; they can be indispensable decorative elements for your dacha. After reading this article, you will be convinced of the rational use of plastic containers and will be able to make good crafts with your own hands.

For many people, regular plastic bottles don't make a big difference. Of course, now everyone has such containers and in quite large quantities, so they are simply thrown away as unnecessary. However, as today's craftsmen with golden hands show, it is in vain. You can use them to make wonderful crafts from plastic bottles, which will be not only useful, but also beautiful decorative elements. These things can decorate your personal plot, changing his appearance beyond recognition.

Crafts from bottles for the garden (+photo)

As a rule, they make various crafts, the material for which is plastic bottles, for garden plots or vegetable gardens. After all, every summer resident wants to equip his plot in such a way as to create comfort and coziness on it, and making crafts from plastic bottles with your own hands is not so difficult, or rather, quite simple. And the materials for the products do not require large financial outlays; everyone always has them at hand.

Products made from bottles do not require the use of any special tools, and no skills are required to create something unusual from such material.

Tired of spending money on clay pots that constantly break - original hanging plastic pots will be a real salvation for prudent owners

With a little ingenuity, an ordinary plastic bottle turns into a wonderful bird feeder

What can be made from a plastic bottle

Plastic bottles can be an excellent material for making decorative items, intended not only for the site, but also for the house. After reading this article you will find many different examples of the successful use of this material. So, a little more about everything...

Greenhouse or gazebo

It can be built from bottles. Such buildings will not require large expenditures on various building materials, and the result will please any avid gardener.

Having a large number of polyvinyl chloride bottles, you can safely begin building a building, giving it any desired shape. Using this material, you can build not only a greenhouse or, but even.

To build this structure you will need to adhere to the following instructions:

Before you start building a gazebo or greenhouse, you need to build a frame made of metal or wood;
After the frame is ready, holes should be made in the bottom of the bottles. The covers also need to be drilled;
Next, through the holes, the bottles are threaded onto the wire. Next, you need to secure the wire to the frame, thus carrying out the process of erecting walls;
You can use vertical and horizontal methods for threading bottles onto metal wire. When these methods are mixed, the structure is much stronger. To create patterns on the future walls of the structure, you need to use multi-colored bottles.

PVC bottles can be used for cultivating plants as well as vegetables. To do this, you need to cut off the top of the bottle and make holes in its bottom. Then you can pour soil into the resulting container and plant seedlings or flowers.

You can make original crafts from plastic bottles with your own hands on completely different topics. By showing your imagination, you can make a comfortable chair or table for your garden that will harmoniously fit into overall design summer cottage plot. You can also build an original birdhouse or bird feeder that will not only decorate your garden, but also bring benefits.

You can use absolutely any item as a material, of which there is always plenty in any household. This could be an old unnecessary bucket, a cast iron pot, worn out car tires and much more.

Using original decor for decoration, plastic bottles can be used to make excellent containers for storing various small items

How to make original decor from a bottle

As mentioned above, plastic bottles can be an excellent material for making decorative items intended not only for the site, but also for the home.

To make the design of the site more beautiful, you can use bottles to create flower arrangements. These can be daisies, tulips, roses, cornflowers, asters, begonias, carnations and many other flowering plants.

Daisies from plastic bottles (+photo)

For example, to create daisies you will need green and white bottles. The sequence of work is as follows:

For white bottles you will need to cut out the base for daisies. To do this, you need to cut out the side walls in the shape of a circle. The diameter of the circle should be 7 centimeters;
The resulting circles should be cut without reaching the center. The result will be future chamomile petals;
Next, you need to give the petals an oval shape. After which you need to warm the future flower over the fire. This way the chamomile will seem real;
Small circle of plastic yellow color Perfect for making the core of a future chamomile. The green bottle will act as leaves and stem;
The final stage is to combine all the elements into a single composition.

Lilies of the valley from plastic bottles (+photo)

To make your garden look more beautiful and attractive in spring, you can also create lilies of the valley from plastic bottles. This craft will look very unusual in the garden.

To create lilies of the valley you will need the same plastic white and green bottles:

The top of white bottles is cut off. The cork in this case will play the role of a bud;
Holes are made in the lids;
Leaves and stems should be made from green bottles;
The buds are attached to the stems with wire.

After the lilies of the valley are ready, they must be carefully placed in the ground; you can place such flowers in a small flower bed.

Vase made from a plastic bottle (+photo)

From unnecessary bottles you can create an original vase, which can be used as a decoration not only in the garden but also at home. For this we need a regular transparent bottle and sharp scissors.

The first step is to cut off the neck of the bottle. This must be done so that the cut is smooth and without burrs;
Next, cuts are made in strips of the same width;
The resulting strips need to be bent outward;
After which, the strips need to be bent, giving the vase its shape. For this you can use the same scissors.

When working with plastic bottles, you need to do everything carefully and slowly, otherwise your work may be in vain, and all your efforts will be nullified. You should also be extremely careful when using sharp tools, which can seriously injure you.

A beautiful vase is only for beautiful flowers

A white stork and a pink flamingo together is a picture that you will probably never see in nature

For making a flower vase, you can also use glass bottles. It is advisable that they have a wide neck and are made of thick glass, so they will be more convenient and practical to use.

You can decorate them using multi-colored wool threads and special glue. The bottle is wrapped completely, from the bottom base to the very neck, where the end of the rope is securely fixed with glue. It is best to use beads as decoration for finished products.

As practice shows, everything is ingenious, simple!!!

Broom made from plastic bottles

You can make a broom from a bottle, which will be convenient for cleaning up garbage. It is done quite simply.

To do this, you need to cut the bottom, cut the bottle into strips to the base of the neck;
After that, the resulting broom should be placed on a handle specially selected for the width of the neck and securely fix the attachment point with a nail or self-tapping screw.

Crafts from bottles for children

Who else, if not small children, will be delighted by various crafts made from plastic bottles, especially if they are made with their own hands. The most important thing in this matter is to find time and desire, but there is no need to worry about the material; as they say, the summer resident always has it in abundance.

The limitless possibilities of this universal material allow you to realize even the most bold ideas and fantasies.

There is probably nothing better than the mischievous laughter of children, their joy and delight. Therefore, by making various fun decorations for your kids, you are guaranteed to provide them, and yourself, with a good and fun time at your summer cottage, which will give you a storm of positive emotions.

Sometimes you can take a break from plastic bottles and try to create something from other scrap materials.

Look around, use your head, ingenuity and imagination - this is exactly the occasion when you need to show your true ingenuity and creative skill.

There are many more ideas related to the use of plastic bottles that are easy to make. And the result can please everyone.

And the functionality of crafts can be aimed at various areas. The main thing is imagination, and then the plastic that no one needs will become a real work of art.

We hope that this article was useful to you and you were able to emphasize something for yourself personally. Good luck in your endeavors!

(20 ratings, average: 4,25 out of 5)

Every person wants to decorate their home or garden. I would like to spend a minimum of money on this. If you have free time, you can make some nice little things with your own hands. To make it very inexpensive, you can use affordable, waste material. For example, plastic bottles.

What can be made from plastic bottles?

Plastic is a universal material for making purely decorative or useful household crafts, which can be divided into types:

furniture;
shower at the dacha;
greenhouses;
paths from traffic jams to the country;
various flower beds and decorations on them;
children's crafts;
boxes for seedlings, flowerpots, flower pots or vases for cut flowers;
decorative figures for the garden;
decorative flowers and butterflies;
bracelets, jewelry boxes.

To make all these cute and undoubtedly necessary things you will need a little time, fantasy, available materials and, of course, the desire to make a craft with your own hands. Before making crafts, bottles must be washed, labels removed and dried.

Crafts from plastic bottles for the garden

At your summer cottage, you can make a lot of useful and inexpensive things from plastic with your own hands.

DIY furniture made from plastic bottles

In theory, you can assemble both a sofa and armchairs, but this requires a lot of time, patience, and most importantly, material. Much faster assemble the ottoman, coffee table and other small furniture. At the heart of any furniture made from plastic bottles there will be a so-called block, which consists of one whole empty bottle with a closed lid and a second bottle with the neck cut off. She puts it on the first one. The result is a design with two bottoms.

To make an ottoman, such blocks are tied into a round structure and wrapped with tape. You can finish the job here. But in order to get not only what you need, but also beautiful thing, you need the resulting construction wrap with foam rubber and put a sewn cover on top. The soft ottoman is ready.

To make a coffee table, you will need blocks from one whole bottle and several cut ones, which are put on with the bottoms up until the required height. The tabletop can be made of plywood, which is then covered with a tablecloth or laid out with a panel of multi-colored lids.

Shower made from plastic bottles at the dacha

If there is no water at your summer cottage, and after a hot summer day you want to douse yourself with some water and wash off the sweat of work, a shower from a 10-liter bottle may be the solution. In the bottom of the bottle you need to do big hole for filling with water, and smaller holes for fastening. A wire or thick fishing line is threaded through these holes and secured to the required height. Holes are pierced in the lid with an awl; the more holes, the more intense the water pressure. Using the same principle, you can make a washbasin from a 5-liter bottle.

Broom for cottages and summer cottages

You need to take several empty plastic bottles, cut off the bottom and cut into small longitudinal strips, not reaching the neck by 4 centimeters. Cut the bottles lengthwise and tie them to the handle. The broom is ready.

Gallery: crafts from plastic bottles (25 photos)

What can be made from bottles for room decoration

Products made from plastic bottles in an apartment or house will look appropriate in the kitchen or children's room. If the decor allows, you can place them in the living room.

Butterflies made of plastic

You can decorate flower pots with these butterflies or make a pendant for a nursery. Even in the living room you can decorate the curtains in the desired color scheme.

To make a butterfly, you need to draw or print it on paper insect pattern. According to the size of the template, cut a rectangle from a transparent plastic bottle and transfer the design to the plastic. Cut out the outline of the future butterfly. Paint the blank in the colors you like. The butterfly is ready. If you decorate flower pots with such a butterfly, you need to attach it to a thin, but not soft wire and install it in the pot. It will seem that they are fluttering over the flower.

DIY plastic flowers

Flowers and vases require precise markings. To make a flower you need to take colored plastic bottles. You need to draw a template, cut out blanks from plastic and burn them over a candle to give the desired bends to the petals. String several simple pieces onto a wire and form a flower. Wrap the wire stem in spirals cut from green plastic. Make leaves from it, cutting it out according to the template and making a fringe along the contour of the leaf. They are attached to the stem either by heating or by gluing.

Crafts from plastic bottles for children

For small children you can make funny figures and piggy banks. For example, penguins for the New Year. Cut two bottles at a height of 10 centimeters from the bottom and insert into each other. Take a felt-tip pen, draw a face and color the penguin, draw a scarf and a hat for him.

Can be done frog candy bowls. They are made similarly to penguins, only the bottles are not inserted into each other, but a zipper is sewn or glued to the edges of the edge so that the future candy bowl can be opened and closed.

For older children, you can make boxes or bracelets. To do bracelet, you need to cut a strip of the required width, which can be tied with multi-colored threads.

Also, artistically decorated cut blanks can be used as pencil holders and cell phone holders.

Crafts from plastic bottles for the garden

The uses of plastic in the garden are almost limitless. Homemade products made from plastic bottles will organically fit into any garden landscape. Here are some possibilities for using bottle crafts in the garden:

flowerpot;
flower bed fencing;
bird feeders;
boxes for seedlings;
decorative elements for decorating flower beds and fences.

For the manufacture of flowerpot lay the workpiece horizontally and cut out a rectangular recess, make holes in the opposite wall so that the water does not stagnate after watering, add soil and plant the plant. To decorate the flowerpot, you can glue plastic eyes on the side of the neck and you will get a hedgehog with a plant instead of needles. You can make a vertical planter by cutting the bottle to the required height. Glue on the eyes, and instead of a nose there will be a lid, you get a little man. The plant will serve as hair.

Plastic crafts can be used as figured flower bed. Outline the outline of the flower bed. Cut the plastic at an equal height from the bottom and dig in the blanks with the bottoms up. They can be painted in different colors.

To execute bird feeder, you need to take a 5-liter container, hang it and cut a hole so that birds can fly inside. The hole should not be too high, in which case the birds will not be able to fly out, and too low, as the food will spill out when swinging.

Can be done flowers from plastic bottles with your own hands in the flower beds. The stem is a wire painted green, the flower itself is a figuredly cut bottle.

Crafts from plastic caps can become a decoration for a summer cottage. For example, you can do decorative curtains. The corks are strung on a fishing line and secured to the base.

Crafts made from plastic bottle caps are used as garden paths and as fence decorations. To create multi-colored panels, you first need to make a sketch on paper to calculate the number and position of covers of different colors. Lids are fastened cement mortar for strength, but glue can also be used.

DIY crafts from plastic bottles

Trend rational use Household waste disposal has recently become increasingly popular, especially for plastic containers. You can make almost everything from plastic bottles with your own hands. country house interior and not only. One of the main advantages of this material is its long service life, and it is also very elastic. Don't forget that plastic bottles are... available material, which is always available to every owner or hostess.

Cheap and cheerful - we make flower beds from bottles

Plastic containers are an ideal option because they have a great advantage over wood and even metal. Wooden fencing in flower beds or flower beds dries out over time or rots under the influence of moisture and sun. Even metal curbs are susceptible to corrosion and require periodic maintenance, such as regular painting.

What about plastic? It does not lose its shape and does not collapse for a long time. This means that such a flower bed will last for more than one season or even one year, and it also requires absolutely no maintenance. Even if a “breakdown” occurs, the required “element” can always be found in the pantry and easily replaced, without resorting to long, tedious shopping trips to find a suitable fragment.

So, what can you make from plastic bottles with your own hands?

Bottle borders

If you need to fence a flower garden, plastic containers of different sizes will do the job perfectly. This will not only limit space and prevent growth perennial plants, but will still retain moisture and prevent the appearance of weeds.

The shape and size of the flowerbed depend only on the imagination of the summer resident: it can be either equilateral or in the form of some kind of animal or plant. You can also use bottles to break the flowerbed itself into segments.

Even a child can build a bottle border (with the help of adults, of course):

The first step is to draw the contours of the flower bed with a sharp object or sprinkle sand on the site.
Remove the labels from the bottles, wash them, pour sand into them and screw on the cap. If this is not available, you can use ordinary soil or water. This is necessary for stability, since empty containers will quickly fall out of the fence.
Dig a groove along the outlined contour so that the bottle can be deepened into it by about 1/3.
Place the filled bottles in the groove with the neck down, as close to each other as possible, and cover with soil.

For visual effect you can use bottles from different color plastic (green, white, brown).

Some summer residents do without digging in bottles. For example, bottles without a bottom are simply inserted into each other, forming a circle. The finished structure can be “put on” or taken into a ring trunk circle tree. To secure the curb, it must be pressed tightly to the ground with arcs.

Multi-tiered flower bed

If you really want to have a flower garden, but there is too little space, you can make it yourself from plastic bottles. The principle is the same as when constructing a border, only after laying the first tier it is necessary to fill it with nutritious soil, and only then lay out the next floor.

When planting plants for the lower tier, it is better to choose moisture-loving specimens, since when watering the water will flow down.

Mini flower beds

Beautiful and useful crafts for a summer residence, you can make it from 5-liter plastic bottles. They will serve as miniature and cute flower beds, for example, in the shape of everyone’s favorite piglets.

Group compositions in the form of trains with flowers look no less impressive.

And if instead of flowers you sow lawn grass, a large bottle turns into a cute hedgehog with green spines. All that remains is to attach the eyes and nose.

Those who are not afraid of small rodents will like cute mice from small (liter) bottles. They are good for planting petunias.

Flower pots and flowerpots

With a little imagination, plastic bottles can easily be transformed into small decorative pots for flowers or herbs. You can make them even or cut them to fit a marker in the shape of a face. Such flowerpots will look great not only in a garden gazebo, but also on a windowsill in a house.

But if you put a fabric cover on the cut bottle and attach ropes, you will get elegant flowerpots for the summer veranda.

The easiest way to make hanging pots is to cut out fragments of the walls on both sides of the bottle, and secure a rope under the neck for hanging. Compact, low-growing plants can be planted in such flowerpots.

Making a beautiful garden path

Paths made from plastic containers are especially popular among summer residents. The strength of such a path depends on the laying method and what part of the plastic container serves as building material:

Paths made of plastic bottles become very slippery in winter.

Fun playground - decorating a place for children to play

Caring parents always strive to provide their children with a place to play in their dacha, where the children can while away the time while the adults are busy in the garden. Of course, it should not only be safe, but also colorful so that the kids will like it. With the help of plastic bottles it is easy to decorate the playground by making a variety of plants and animals. Regular paint will help give them brightness.

In the shade under a palm tree

What is a children's playground without a sandbox? And where there is sand, a palm tree must “grow”. For Tropicana you will need bottles of green and Brown for the trunk and leaves, respectively.

Before you begin assembly, you need to make sure you have a solid base. For example, fix in concrete screed a metal pin, and it must be quite long so that the tree is tall and children can walk freely under it.

When the base is fixed, you can start “growing” the palm tree:

cut off half the bottle (the top and neck are not needed) and form a jagged edge;
Make a hole in the center of the bottom, string the blanks onto the base pin, bending the teeth to the side for a more natural look;
cut off the bottom of the green bottle and make straight cuts along the entire contour to the place where the wall meets the neck (if desired, the branches can be made into shapes - cut into 4 parts and make teeth on each one);
string fragments of the branch onto the base;
firmly attach the finished branches to the top of the stem (by welding or construction cords).

If after assembling the palm tree there are still a lot of green bottles left, you can use them to make a small (or large) Christmas tree. Remove the bottom of the bottle and cut it into long narrow strips right up to the neck. Trim the edges of the strips to resemble thorns. String the leaves onto the base.

Such a Christmas tree will look great on the site in winter, especially under the snow, and will also help out on New Year's Eve those who, in a hurry, did not have time to buy a living tree.

Guests from a fairy tale - funny animals

And of course, there must be toys. Children often take their old favorites outside. With the help of plastic bottles, you can easily diversify the “zoo”, creating real masterpieces - from the fairy-tale Frog Princess and Goldfish to modern cartoon characters.

Take, for example, a handsome cat, painted with black and white paint. Or you can use brown beer bottles and you will get a brown cat, also beautiful.

Form a head from two bottle bottoms (connect them), and the curves on the bottoms will indeed look like a real head. On one of them, paint eyes, eyebrows and mustaches with white paint, and a neat tongue with red paint. Insert small cut out ears on top. For the body, string the same short-cut bottoms onto the base, closing the body last. Melt the edges of the bottoms. Apply white paint along the melted contour of the ears and body fragments, and make a white spot on the chest on the front bottom.

Glue the head and legs - the top parts of bottles with elongated necks will be useful for them. Cut them to the place where the bottle expands, cut the edges with sharp teeth and build legs from 4-5 parts, putting them on the base wire. Screw the plugs onto the upper necks and use them to glue the legs to the body. For the tail, take a long wire and string the narrowest parts of the neck onto it, but without the plugs. To make the tail fluffy, cut the edges into thin strips.

Beautiful animals are also obtained from large 5-liter containers. With the right combination of bottles of different sizes and with the help of bright colors, you can place a zebra, horse, cow, donkey and even a giraffe on the site.

Flowers for my daughter

In the sandbox, children not only make Easter cakes. Little girls love flowers very much and often collect dandelions on the lawn (or in their mother’s flowerbed) to plant them in their sand garden. But you can make a whole greenhouse of flowers from bottles, and little girls will be happy to take part in making the simplest options. Chamomiles, cornflowers and tulips will decorate the sandbox, especially since young flower growers will be able to repeatedly “transplant” them from bed to bed without harm to the plants or mother’s nerves.

For flowers you will need:

wire for the stem;
straight parts of bottles for cutting leaves out of them;
necks or bottoms for the inflorescences themselves;
dye.

Adults can make more complex versions. Plastic roses or poppies will decorate not only the playground, but also the flower bed.

Plastic design for garden

Plastic bottles have a wide range of applications. So, if small animals and birds look appropriate in flower beds and playgrounds, then larger animals can be placed in the garden, among trees and shrubs. They will give the garden a unique look and enliven it.

Amazing garden sculptures

Representatives of large birds made of plastic look almost alive. Using multi-colored paints you can achieve a stunning realistic effect. To make them, you just need to master the technique of cutting feathers from the sides of bottles and prepare a frame on which they will be attached.

The following will look very impressive in the garden:

In the garden you can place sculptures of not only birds, but also animals of a large enough size so that they do not get lost against the background of tall trees.

Among the greenery, a bright spot will be a white sheep, which is quite easy to make if you have 2 liter bottles and several 1.5 liter bottles lying around in the pantry:

Cut the necks of two 2 liter bottles and put them on top of each other - this will be an elongated head. Cut out long ears from the third bottle, roll them up a little into a tube and attach them to the head in appropriate places with wire (or glue). You can draw eyes or glue two corks.
For the body, insert the whole bottle with the neck inside into the cut-off top. Make 3 more such blanks and attach them to the first one on the sides and top, thus giving the sheep the desired “waist” volume.
The neck will be a whole two-liter bottle, which should be attached to the body at an angle of approximately 120 degrees so that the cork is on top.
Place the head to the neck (on the plug).
For the legs, cut off the top of a two-liter bottle and insert a whole bottle of a smaller volume (1.5 l) into it. Make three more such blanks and attach the legs to the body with the wide part up.
From the cut bottoms of two liter bottles make a fleece, fastening them together, and put it on the body. Grip the edges of the fur coat under your belly.
Paint the sheep with white paint and draw black eyes.

Caring for birds

Plastic bottles can be used not only for decorative purposes, but also for the benefit of the garden. After all, it is always inhabited by the summer resident’s little helpers - various birds that collect pests from the trees. In the warm summer time they have something to eat, but in winter it becomes more difficult to get food. That’s when the feeders hanging around the garden will come in handy. And if you involve children in the process, you get a double benefit: the children get an interesting activity and pleasure, and the birds get cozy house with grains.

The simplest ones can be made from large 5 liter plastic bottles, simply cutting out on both sides large holes in the shape of an arch.

To prevent birds from injuring their paws on the sharp edges of the bottle, they must first be melted or covered with electrical tape.

For those who rarely visit their summer cottage in winter, a feeder that fills automatically will come in handy.

You can make it from a bottle and two wooden spoons:

make two holes in the bottle opposite each other, with the second one located slightly lower;
unwrap the bottle and reverse side repeat the procedure;
insert the spoons crosswise into the holes.

After the bottle is filled with food, it will be poured through the holes into the spoons as they are emptied.

A cozy place to relax using improvised means

Not only birds, but also the owners themselves should have their own secluded corner among the greenery, where on warm summer evenings you can happily drink a cup of tea, inhaling the aromas of nature. Many people prefer to place it in the garden. They are very beautiful, you can’t argue with that, but they require certain financial investments. But it’s cheap and cheerful to make from plastic not only a recreation area, but also to completely equip it.

Alcove? Easily!

A gazebo is one of the largest-scale garden crafts made from plastic bottles. But a plastic gazebo has two big advantages:

it is easy to assemble;
will last for more than one year without damaging the material.

Perhaps the only drawback of the building is the presence of a large number of bottles, which need to be stored somewhere during the collection process.

What the gazebo will look like depends only on the desire of the owner, and, accordingly, on the availability of “building materials”:

Practical curtains for the gazebo

In summer gazebos there is a lot of fresh air, but, unfortunately, also dust. Ordinary tulle requires frequent washing, while a plastic curtain does not collect as much dust, and you can “wash” it without even removing it - just spray it with water from a hose (of course, if such a curtain is not hanging in the house).

For dreamy and romantic housewives, delicate curtains made from the bottoms of plastic bottles strung on a base are suitable.

To energetic people who love bright colors, cork curtains assembled according to the same principle are more suitable.

garden furniture

A table, ottoman, armchair and even a sofa in a gazebo can also be made from plastic bottles. The old one from the house is also quite suitable for relaxing in the fresh air, but it, like the curtains, will eventually become a collection of dust. In addition, take out wooden sofa It is quite difficult to go outside, because such furniture is quite bulky and heavy. But rearranging the plastic chair will not be difficult.

Assembling the furniture is not difficult - the bottles just need to be placed tightly and connected together with tape, giving the required form. For ottomans, knitting or sewing a cape - no one from the outside will guess what they are actually made of.

Leatherette covers are more suitable for a sofa.

Unbreakable chandeliers for the garden

If you are planning an evening tea party, you should definitely go to the gazebo. To decorate the light bulb, you can cut the bottle into two parts and make a simple lampshade from the upper half and paint it or cover it with colored thread.

In plastic chandeliers, it is better to use energy-efficient light bulbs - they do not heat up so much and will not melt the material.

In more complex versions, chandeliers are assembled from fragments of leaves or flowers cut from multi-colored bottles.

Gardening supplies for gardening

To country cottage area looked beautiful and neat, it needs to be looked after all the time - weeding, collecting fallen leaves and small debris. To do this you will need tools. Of course, you won’t be able to make a hoe or rake out of plastic, but simpler ones are quite possible.

Craftsmen have long known how to use plastic bottles to their benefit and to save money. family budget. After all, if the scoop suddenly breaks, you no longer have to run to the store for a new one. From household waste, which is found in every home, a lot of useful things are obtained at no extra cost:

Garden cares

From plastic bottles you can make useful things not only for the garden, but also for the vegetable garden. These can be either small crafts in the form of, or larger-scale structures such as greenhouses.

Greenhouses for seedlings

Most summer residents grow seedlings of garden crops on their own. Some do this in apartment conditions, but better quality seedlings are obtained from greenhouses - there is enough heat and light.

We can’t even talk about cost, but as for durability, plastic bottles will certainly last longer than film shelters or glass structures.

To increase the service life of greenhouses made from plastic bottles, it is advisable to place them on a foundation and use a metal profile for the frame.

The simplest version of a greenhouse involves constructing walls from whole bottles that are placed on top of each other.

It will take a little longer to tinker with a greenhouse made of plates, but it will turn out warmer. In this case, you need to cut out even parts from the bottles and fasten (sew) them together in the form of a canvas. Use ready-made canvases to assemble a greenhouse.

Watering "systems"

For gardeners, watering is no less pressing issue than having a greenhouse. Instead of ready-made watering systems in the garden, you can use. They must either be hung above the bush, having previously made holes in the lower part, or dug into the ground.

In addition, the bottle makes a good sprinkler - you just need to make small holes in it and connect it to a watering hose.

Getting rid of pests

A repeller made from a plastic bottle will help drive away the gardener’s worst enemy, the gardener, from the property. He not only plows up the beds, digging his tunnels, but also damages them in the process root system plants, depriving gardeners of the future harvest.

If you cut the side walls of the bottle, bend them and put the container on a steel rod, when there is a gust of wind, the bottle will spin and make noise. The sound will go into the ground through the rod and deprive the mole of the desire to manage in this noisy place.

The list of things you can make from a plastic bottle with your own hands is quite long. These are just a few crafts that make life easier for summer residents. Agree – it’s better to get the most out of bottles than to pollute the environment. Take care of nature and work with pleasure!

21 ideas for using plastic bottles - video

For people with imagination and skillful hands, it will not be difficult to turn unnecessary things into real masterpieces. Masters and beginners use crafts from plastic bottles for the interior, like garden decor and in the form practical furniture. Colored plastic bottle caps are an excellent material for mosaic panels on walls and fences. Best ideas With detailed instructions and the photo can be easily implemented at the dacha, turning a bare area into a “clearing of fairy tales”, and filling the house with useful little things.

Important advantages of crafts made from plastic containers

A well-made souvenir or trinket will eventually develop into a hobby, if there are no limits to your imagination. Summer residents who have moved from simple fences on wire to buildings that delight in scale never cease to amaze.

From available material that many throw away, someone builds:

greenhouse;
carport;
summer shower or bath;
country toilet or shed;
summer gazebo or sun canopy;
a mansion for children or a playground;
sandbox with decorative sides;
various temporary buildings on the site.

The main advantage of such structures is the available material. When the elements are securely fastened, the walls of the building are aesthetically pleasing and completely reliable. It all depends on the way the plastic bottles are connected. If you approach the matter thoroughly, the desired result will impress even experienced builders.

Over time, plastic becomes a real environmental disaster - it is difficult to recycle. But if you involve everyone who cares in cleaning the area, there will be a whole mountain of empty PET bottles for building a greenhouse, cascading flower bed or vertical gardening. The only drawback is that it takes a long time to collect identical containers, since containers are produced in different colors and volumes.

Some manage to collect enough craft material in one season, while others involve neighbors and friends in collecting plastic. Someone decides to clear the area for picnics in order to improve the environment on the way to the dacha and collect material. As a result, the plastic bottles are in use and the area is clean.

Another advantage - plastic container soft and pliable, easy to cut, no complicated tools required. With little skill, the material itself “dictates” ideas.

For creating original decoration required:

interesting idea;
finished sample for imitation (illustration);
material for crafts with tools;
step by step guide training plan.

In the hands of a true master, plastic bottles take on a second life, becoming functional objects. It is better to make souvenirs on a seasonal basis. For example, New Year's toys are made in the winter, practical country houses are made in the summer, and in spring and autumn it remains to build a “clearing of fairy tales” near the house for children.

Recycling plastic containers is a fun activity for the family. It is easy to attract children to him by entrusting him with a simple part of the work. Don’t forget to remind them that you’re not just making a firebird or “Chunga-Changa island” with palm trees from bottles, but that you care about the environment. You can involve a yard or a school classroom in beautifying the area.

Furniture and interior items made from plastic bottles

Furniture made from plastic bottles looks like a masterpiece that is not accessible to everyone. They will require a lot of plastic containers of the same type. Sofas and poufs impress with their design and comfort, not inferior to real furniture. There is nothing complicated if the sofa is made in blocks - seat, back, sides. If the container is not enough, the sofa blocks can be made one at a time. It’s better when you collect bottles from one drink, for example, two-liter kvass or lemonade.

The principle of “assembling” furniture from bottles is simple - they are placed in layers and tightly wrapped with tape. To make the furniture softer and more springy, a little air is released from each bottle and twisted tightly. At the place where the cap is, cut out a cap from another bottle and tape it with tape. It turns out to be a block with a bottom on both sides - this is the basis of the furniture.

Then it all depends on your imagination, the type of furniture and the number of bottles available. We wrapped 7 containers of the same volume with tape to create the base for an ottoman. What its appearance and style will be depends on the artist. For a soft seat you will need round pillow or a block of foam rubber to fit the top. The cover is cut to the size of the ottoman in the form of a cylinder, and it is convenient to insert a zipper along the side seams, but it is easier to sew the upholstery tightly.

If there is not enough furniture for the summer, an ottoman for the cottage is made from an old wadded blanket and a baby pillow, wrapped in a block of bottles. Old curtains or a bedspread will be used for the lining. If the pouf should have a presentable appearance, choose newer and more expensive fabric or eco-leather.

To build a coffee table you will need 4 racks of plastic bottles and a plywood board as a table top, which can be hidden with a long tablecloth. They do it in a similar way convenient stand for a laptop or a remote table for the garden. For large furniture (sofa, chaise longue or chair) made from plastic bottles, you will need a lot of patience and raw material.

Useful little things for the home from plastic bottles

Flowers and vases

Decorating a schoolchild's bedroom or children's room with crafts from plastic containers is not difficult. You can build a whole bouquet of artificial flowers. Place the resulting chrysanthemums, daisies or roses in a vase made of the same material, adding diode bulbs on an insulated wire to the centers. This is what a night light of extraordinary beauty will look like, where the faint light shimmers in the plastic petals.

Advice: To give the leaves a special shape, use heating the blanks and folding the corners with tongs!

To place a homemade bouquet you will need a suitable vessel; simply cutting off part of the bottle is not aesthetically pleasing. The edges of the cut are marked with a ruler to make the cut, securing the result by heating the bends. A small transparent bottle is cut off to the very top, and about half of a large container is cut off. We choose a material with a ribbed or “waist” in the middle to create an interesting base.

Then we do it as our imagination allows, but we bend the edges beautifully. The fringed cut is obtained from vertical or diagonal cuts in the plastic base. The resulting strips are evenly folded to the outside.

Note! It is important that all the notches and the depth of the slot are absolutely identical, then the entire product will come out neat.

Depending on which edge is desired, the strips of the vase (the edges of any other product) are secured in different ways:

curly bend;
staplers;
fusing;
gluing with transparent polymers.

Flowerpots, flower pots and containers for seedlings

Colored plastic containers in the form of bottles and bottles of different sizes are suitable as containers for growing live plants. It is very easy to make a fragrant balcony from 3-liter tanks - a cascade of hanging petunias. Fragrant flowers hanging from cut containers will help make your dream of a beautiful piece of paradise come true.

Large bottles and tanks cut in half are hung with both the bottom down and the lid. It is recommended to place large pebbles at the bottom for drainage. Excess water after watering will go to the plants in the lower rows. Plants are grown in the same containers without soil - hydroponic method with the addition of fertilizers. Fresh greens and seedlings (in urban and country conditions) are also germinated in prepared plastic bottles.

Advice: Use the compact form and ability to hang containers for vertical gardening with automatic watering. In the absence of the owners, watering cans with water immersed in the ground will cope with moistening the plants.

Traps and feeders

Using plastic bottles you can repel pests or attract birds to your site. For this purpose, the tank is used as a feeder, and at the roots fruit trees place traps from bottles of chemicals. From double plastic containers, craftsmen build traps for wasps, where they fly into sweet water and cannot get back out.

Equipment for a summer cottage

At the dacha, it’s easy to whip up crafts from plastic bottles in the form of an impromptu washbasin by hanging a full bottle upside down. Just unscrew the lid a little and a small stream of water will help you wash your face and hands. It is also worth making a bench and organizing lighting with beautiful owls or plastic gnomes. Any garden decor for inspiration - with interesting illustrations.

Multifunctional items for the home

Make an original cosmetic bag from 2 bottoms of plastic bottles, sewing the edges together with a zipper. This box can be used as a multifunctional item - a piggy bank, a case for large beads, hairpins or jewelry.

It is convenient to knit from such a ball, suspended somewhere nearby, by pulling the thread from the ball inserted inside. It’s easier to find nail polish or a lipstick collection in a makeshift zippered box.

New Year's decor

Bright New Year's balls, garlands or toys made from plastic bottles are a worthy use for transparent containers. One bottle, cut into round strips, will produce a transparent ball. After securing the sphere with a stapler, decorate it in any way:

“rain” winding;
pasting with crushed polystyrene foam (snow);
decoration with sequins, beads and stones.

New Year's decor made from white plastic bottles with a waist is suitable for snowmen or penguins. You can use black nail polish to draw eyes and other elements, cotton wool (snowball), glitter, small buttons, beads and whatever is at hand. Funny caps for characters - from colored socks without a pair, strips of knitwear are used as a scarf.

Advice: From homemade winter characters, a candle, ready-made tinsel and a couple of pine branches with cones, create an original New Year's composition so as not to buy a Christmas tree.

Curtains made of colored plastic caps and bottles

Zoning space is a popular design technique, where a hand-made translucent curtain is often used. Original curtain can decorate any living space, cottage or covered terrace. Original hanging partitions made from unusual materials are widely used in the interior.

IN modern decor Plastic is in demand, including bottles and bottle caps. There are options for curtains:

from scraps from the bottoms of small containers - strips on a thick fishing line, swaying with the movement of air;
from colored lids - a fantasy panel of tightly strung elements;
a garland of plastic and lights to give the LED curtain more aesthetics.

Original all-season flower beds

The summer season is passing, and living flower beds are being replaced by homemade plastic flowers that are no less beautiful than real ones. Their advantage is the ability to decorate the territory at any time. These flower beds pale in comparison to living plants, but in early spring and late autumn they alone attract admiring glances.

For daisies you will need small ones plastic containers white(petals), yellow (centers) and green (leaves). You will also need an awl and a candle (for heating), “liquid nails,” scissors and stiff wire in green insulation.

We cut the base of the white bottle to the center, marking 16 segments - these are the petals. We bend the neat edges over the candle flame, and also make 2-3 chamomile corollas, which we connect in the center with an awl. Here the stem with leaves is fixed on a green wire, closing with the middle. We fill the center of the flower with a yellow basket with small cuts from 2 finely dissected circles with a fringe bent over the candle. We supplement the flower with green sepals from the bottom, collect all the parts and fix them together.

From the remaining pieces of green plastic, cut out leaves with a hole at the base (for stringing) and give them the desired shape, heating them over a candle flame. We attach the leaves to the wire handle; they should bend around it slightly. All that remains is for the chamomile to make several “companions” and find a worthy place for the bouquet.

Using samples and imagination, it’s easy to make plastic lilies of the valley, roses, chrysanthemums or tulips. To do this, you need plastic of a suitable color, from which several layers of petals are made to achieve a resemblance to real flowers.

All-season flower beds include mosaic compositions made from containers filled with earth. The lids are used to make wall panels. "Butterfly" or " ladybug» – in different versions.

Crafts from plastic bottles for the playground

An incredibly beautiful bird with plastic plumage – a whole “clearing of fairy tales”. These are the peacock or firebird, swans, pigeons, bullfinches and parrots. All of them are made from empty PET bottles according to the general principle:

Design an aesthetic bird's head with eyes and beak;
Construct the torso and neck;
String plastic plumage;
Provide with wings and tail;
Place on paws or secure to selected surface.

Plastic swans can be fenced off by a blue “lake” of upside down plastic bottles. Outlandish birds will decorate the trees in the corner of the garden, which is reserved for children's games. You can choose a themed decor, for example, a desert island with palm trees and parrots.

Plastic animals, birds and insects, familiar to our latitudes, as well as favorite fairy-tale characters, are supplemented with other materials. Tires, wood and empty containers that can be easily painted will be used.

How to make decorations from plastic bottles for the cottage and garden

Original garden decor made from scrap material is another way to give the site some personality while the young plants come into their own. From green plastic bottles it is easy to make funny little frogs on the edge of the pond, watching dragonflies and butterflies from the same material.

Palm trees are a popular garden decoration, consisting of trunks (up to 15 brown bottles) and palm leaves (green plastic 5-10 pieces). This is a simple process that even children willingly participate in.

Prepared brown cups with notches are strung on a thick steel rod (bamboo fishing rod), after first piercing the base. It is better to use brown containers (1.5-2 l) entirely, cutting them in half, then you only have to punch through the bottom.

We leave the green bottles without a bottom and neck, with the exception of the last one with a neck, which will be needed as a loop. We cut these containers lengthwise into 3 parts up to the loop and dissect them like leaves. If longer leaves are required, staple the second half of the leaf. All parts of the stem are strung on the base and attached to the top, connecting with a common loop. All that remains is to reliably install “exotic guests” with a lush crown on the site.

The material is collected throughout the year, but it’s easier to involve neighbors and acquaintances in the “ecological” cleaning project. There are special containers for plastic in the yards - it’s much easier to collect.

Preparation for work - removing labels and glue residues from plastic bottles; it is important to rinse well and discard the deformed material.

If vertical fences are built, they need to be filled. Depending on the idea, sand, stone chips or dry soil are poured into PET bottles, burying them 1/3 of the way down.

For selected purposes, plastics of varying elasticity are used. Heat treatment is required for filigree work (flowers). It is important not to overheat the fragments cut into strips.

For fairy tale characters Sometimes additional painting is required. For example, it is better to cover pink piglets for a playground with an aerosol from a spray can and secure them with transparent acrylic paint.

Plastic bottles are an excellent material in the right hands. Using them as a basis, it’s easy to teach children a lesson in environmental education and fill your home or garden with practical things. At creative approach The color, volume and shape of plastic bottles themselves will prompt new ideas for an exciting creative process.