Do-it-yourself original lamps and lampshades. Ideas, master classes. Do-it-yourself multifaceted cardboard lamp How to make a lampshade from cardboard

Lighting can either transform or make any room uncomfortable. Suffice it to recall cold hospital corridors, and, for example, cafes, where there is always soft warm light.

Especially in winter, people miss the sun, so it is very important that there is always light at home. A special cozy atmosphere can be created with the help of various lamps or floor lamps. However, it is not always possible to choose a lamp that matches the interior of the room. But don’t be upset, because you can do it for any lamp.

DIY frame and base for lampshade

First you need to select a lamp or several lamps for which you need to make fabric lampshades. It is better to use lamps with energy-saving or LED lamps. Regular light bulbs can simply burn the fabric, so it’s better not to take risks.

Before you begin, you need to remove the frame for which the lampshade will be created. If the lamp does not have a frame, then it can be purchased, for example, in a special store or construction department.

Also, the frame for any lamp, be it a floor lamp, table lamp or chandelier, can be made independently. To do this you will need thick wire and pliers.

The base can have any shape. It will be easier to make a lampshade for a cylindrical or cone-shaped frame.

How to choose fabric for a lampshade

First of all, you need to choose a suitable fabric for the lampshade. You can use light, hard or dense material. If desired, you can even make a lampshade from wool, it all depends on the creator’s idea and the interior of the room.

If the frame consists of ordinary wire, it is better to use an opaque material to cover it. Dark silk, cotton and taffeta are suitable.

It is also worth remembering that the color of the fabric can give both cold light, and warm. In the first case, you can use blue or green fabric, and in the second, yellow, orange or red.

Necessary materials for making a lampshade

Fabric lampshades can be done different ways. If the new lampshade is glued on top of a regular plain lampshade, then there will be no preparatory work not required.

But if there is only a wire frame, then it is better to first coat it with paint and then wrap it with light or dark cotton tape.

To make the lampshade look neat, you need to sew it on a typewriter.

In addition, you will need:

• iron;
• a simple pencil;
• ruler;
• textile;
• pins;
• threads matching the color of the material;
• kraft paper (or any thick paper, as well as whatman paper);
• glue (you can take a special one for fabric or a universal one).

When all the necessary materials and tools are at hand, you can start sewing DIY lampshade made of fabric.

Master class on making a lampshade with your own hands

First step

First you need to make a template to cut required amount fabrics.

There are two ways: if the frame is cylindrical, then you can measure the circumference and draw one line on the fabric, and then measure the height and draw a second line. After this, all that remains is to draw two more sides of the rectangle and cut out the template.

If the frame is cone-shaped, then you can lay out the paper, take a pencil and gradually roll the frame along the sheet, mark with a dotted line the lines of its sides.

The main thing is that the frame rotates completely; to do this, you can mark a reference point on it using a piece of thread or a pin. After this, you can connect the lines and cut out the template.

Second step

In order not to cut off more, or worse, less fabric, you need to attach the template to the frame of the lamp - it must completely fit. If the template is larger, you need to cut off the excess paper; if it is smaller, you will have to take the measurements again and make a new template.

Third step

When the size of the template matches the size of the base for the lampshade, you can begin to attach it to the fabric. If the material has a pattern, you need to position the template so that the drawn elements “look” in the right direction. You need to calculate everything so that, for example, you don’t cut off the head of a flying bird. Otherwise the lamp will look ugly.

The template must be applied to the wrong side of the fabric, and then it must be secured with pins. After this, you can carefully trace the template along the contour. If the fabric is dark in color, you can use not a simple pencil, but special fabric crayons or a piece of soap.

After this, you need to draw allowances. To do this, you need to draw lines at a distance of one and a half to two centimeters from the boundaries of the template.

Fourth step

Without removing the template from the fabric, you need to carefully remove the pins one at a time and wrap the seam allowances inside. The fold lines must be secured with pins.

Now you need to remove the template and thread the sewing machine. The threads must be chosen so that they are almost invisible on the fabric.

Fifth step

Now you need to sew the resulting part on a typewriter. This needs to be done only on three sides - one of the sides must be left untreated in order to then form a seam on the frame itself.

You need to stitch at a distance of five to seven millimeters from the edge. If desired, you can process the sections. But in any case, they will have to be hidden when the fabric is glued to the frame.

Sixth step

After this, you need to turn on the iron and iron the fabric piece well. If wrinkled parts remain, the fabric will not adhere well to the base, and the lampshade will look ugly.

Seventh step

The next part of the work must be carried out in a well-ventilated room. First you need to lay work surface waste paper or an old tablecloth and lay out the fabric. Then you need to apply glue to it and leave it for some time, which is indicated in the instructions for the glue.

Eighth step

Now you can glue the fabric to the frame. You need to hide the raw cuts, and make the seam in such a way that the lampshade is covered with a stitched edge.

If the lampshade is attached to a wire base that is wrapped with cotton ribbons, there is no need to apply glue to the entire surface of the workpiece; it is enough only to the part that comes into contact with the frame parts. In this case, you need to stretch the fabric well.

Ninth step

The finished lampshade must be left for some time to dry completely. After about a day, you can put the lampshade on your favorite lamp and enjoy a beautiful object that will definitely decorate any interior.

Fabric lampshade decoration

Table lamp with lampshade looks much nicer than just a regular bare lamp. But if a monochromatic color is chosen for the lampshade, then you can decorate it in an original way. Here are some ideas on how to do it interesting decoration fabric lampshade.

Lampshade in Provencal style

In order to decorate a plain lampshade, you will need a piece of fabric and fringe. Usually green, turquoise and pastel shades of colors are used, checkered colors or floral patterns are also suitable.

First, you need to select a suitable fabric for a plain lampshade and cut two strips from it - one to decorate the top of the lampshade. This strip of fabric should be long enough to completely wrap the circle and make a bow. The second strip should be the length of the circumference of the bottom of the lampshade, and fringe must be sewn to it. This can be done on a sewing machine.

All free edges of the fabric must be processed so that it does not fray. After this, using glue or thread and a needle, you need to attach the fringed ribbon to the base of the lampshade so that the fringe hangs down.

Then you need to decorate the top of the lampshade. To do this, you need to glue or also sew a ribbon along the circumference, and tie the free edges with a bow.

For lampshade in provencal style You can also use lace. The good thing about this element is that it can simply be glued to the fabric.

You can make lace flowers, stripes, or completely cover the fabric lampshade with lace napkins.

Lampshade with fabric flowers

Another one unusual idea which will allow table lamp with lampshade to become like a flowerbed - decorating with fabric flowers.

Great for flowers suitable fabric delicate shades, you can use, for example, organza or chiffon, or you can simply take, for example, an old jacket, cut strips and twist roses out of them.

You can decorate a lampshade with just a few flowers, but if you have time and patience, you can make a whole bunch of flowers to completely cover the lampshade.

DIY lampshade made from scraps

If you have many pieces of different fabric at home, you can make a lampshade from multi-colored scraps.

In order to make such a lampshade, you need to use the technique of sewing pieces to a fabric base. The easiest way is to cut a piece of fabric to the size of the frame and divide it into several wedges.

Then you need to sew patches to each wedge the way you like - you can sew strips of fabric diagonally, or make small squares. To avoid delaying the process, it is better to use a sewing machine.

After this, all the wedges with patches will need to be sewn together and glued to the base of the lampshade.

This lamp can fit perfectly into a country style!

Lampshade made of unusual materials

When you make a lampshade yourself, you can give free rein to your imagination and experiment. To do original item, you first need to find unusual material.

For example, in the kitchen, a lampshade made from burlap can look very interesting. This fabric transmits light well. Such a lampshade can be decorated with some wooden parts, for example, clothespins or wooden beads and buttons.

You can also use grandma's old lace doilies for decoration. You can also write something on such a lampshade with white or black paint, as they usually write on bags.

For a teenager's room, you can sew a lampshade in . For this you will need denim. And you don’t have to buy it, you can just cut up old jeans - every person probably has such a thing.

Such a lampshade can be decorated, for example, with a denim pocket where you can insert artificial flower or a piece of a checkered handkerchief. You can also use applique for such a lampshade. Pieces of leather are suitable for this.

For example, for a lamp that will stand in a girl’s room or bedroom, you can sew a delicate lampshade from mesh. This fabric can be found in any sewing store.

A lampshade made of several layers of mesh will look interesting - it will resemble a ballerina’s tutu or a fluffy skirt.

Do you dream of adding brightness to the nursery or refreshing your workplace in the house? Or maybe you are a lover of the East, where the fashion for these such delicate little things came to us from? Then you should definitely read how to make a lamp out of paper with your own hands - unusual, original little things will instantly add a bit of magic to any corner of the house!

We guarantee that your guests will be asking for a long time where you bought this designer lamp, and having learned that you made it yourself, they will ask you to tell you how to make a paper chandelier with your own hands and its step-by-step instructions.

In this master class we will show you four ways to make a lamp out of paper, look and choose the option that’s right for you.

To create this delicate lamp, prepare:

• Colored paper of any color;
• PVA glue or glue stick;
• Paper clips;
• Compass;
• Scissors;
• Fishing line;
• Colored yarn;
• LED lamp ( );
• Wire with switch.

Step-by-step instruction:

Step 1

• Using a compass, draw semicircles 1 cm wide on a colored sheet of paper.
• With each line we increase the diameter of the semicircle.
• Please note that you will need quite a lot of sheets. Then cut out semicircular strips and cut them into pieces of 2-5 cm.

Step 2

• Roll and glue the resulting strips, making one side larger than the other - this will make it easy to glue them together into a dome-shaped shape. After that, you can connect them with glue in pieces of five.
• Glue the clusters together, strengthening them with paper clips until the glue dries. Glue until you have a circle, with a small hole for a lamp.

Of course, you can fantasize, and your lamp will be a little different than ours.

Step 3

Now, while our glue is finally drying, let's decorate our wire. To do this, take yarn of any color you like and carefully begin to rewind the wire with it. Try not to leave any uneven spots when wrapping the yarn over the previous layer.

You can add a drop of glue to the end of the yarn to strengthen it.

Step 4

Let's make a holder for an LED lamp. To do this, we tie a fishing line on three sides (it is advisable to measure the distance evenly) to our glued strips, and the other ends to a paper clip, which we first straighten to the shape of a triangle.

All! All that remains is to place the lamp in the circle and screw it to the wire. You can hang such a lamp either separately or in combination with, for example, .

Master class No. 2: Chandelier made of rice or parchment paper

We present to your attention new master class, where we will teach you how to make lamps from rice paper. There is nothing complicated in making it, as it might seem at first glance, and you can involve all household members in this exciting activity. The designer lamp is suitable for both the nursery and your bedroom.

Instead of rice paper, you can buy a roll of parchment paper for baking

So, to make a lamp you will need:

• Unnecessary lampshade;
• Thin wire;
• Several rolls of rice paper;
• Iron;
• Paper cutter;
• Sewing machine.

Self-production

Step 1

Take a lampshade you don't need (you can buy inexpensive new) and remove everything from it, leaving only the base. If your lampshade is similar to ours, then add a wire in the middle, securing it well.

Step 2

1. Prepare the parchment paper by unrolling the rolls and cutting them into roughly equal rectangles.
2. Iron the sheets until they become completely even and smooth.
3. Fold each sheet like an accordion, measuring equal distances of strips, and use a paper cutter to cut equal, even circles.
4. Try to use the cutter more carefully and don't leave a lot of extra paper– you will need a lot of circles.

Step 3

1. Connect all the circles together by stitching in the middle. Make connected circles of equal length and begin to strengthen them around the circle of the lampshade.
2. Once you complete the first circle, go around the subsequent ones, decreasing the length each time.
3. Carefully secure your lamp in in the right place straightening all the threads.

Remember to only use LED bulbs, to avoid fire.

This beautiful chandelier- result painstaking work, after completion of which you will admire your work and be proud of yourself for a long time. On our website you will find many more ways to diversify your home lighting, for example:

• you can or .
• , for lovers of modernism.
• Or for lovers of eco-style.

You can also at your discretion, paint the rice paper circles in any shade, based color range rooms. If you want to hang this lamp in a child's room, you can add, for example, glass angels on long gold threads - again, choose the right accessories for your child's room. different rooms, this will add warmth and originality.

WARNING: Be aware that incandescent lamps produce very hot temperatures and may cause paper to ignite. For paper lamps and lamps, use only LED lamps.

Master class No. 3: Origami chandelier made of paper

This beautiful bright lamp really resembles a ripe berry!

To make it, take the following:

• 2 paper bags, so that when gluing you get a one and a half meter bag (preferably with an interesting print);
• LED lamp (never an incandescent lamp );
• Wire with switch;

As soon as you decide that training is no longer necessary, we begin preparing the paper bag. Remove the handles and cut the bottoms off the bags and glue them together to make one large paper bag.

Fold the resulting bag in half, and then fold the halves like an accordion so that you get 16 identical folded strips. Then fold the two outer strips diagonally.

Follow the simple diagrams and you will get wonderful lamps to decorate your home. You may have to practice a little to fold origami perfectly, but you won’t regret it, because origami is a whole world of various interesting things created with your own hands. And your children will simply be amazed by your skillful hands!

Master class No. 4: Corrugated paper lamp

To make an unusual lamp you will need:

• Corrugated paper 88×44cm;
• Ruler;
• Spoke;
• Glue;
• A thread;
• Cable;
• LED lamp ( never an incandescent lamp ).

Step 1

• Using a ruler, mark a sheet of paper at equal intervals and fold like an accordion according to the markings.
• Helping yourself with a knitting needle, fold the folded sheet of paper diagonally, first on one side, and then unfold it on the other side.
• Unfold the sheet - you should have it double sheet marked with diamonds.

Step 2

• Connect the marked lines according to the photograph; it is advisable that the sheet is not very wrinkled at this time - otherwise appearance the lamp will be damaged.
• All that remains is to connect the top of the lamp with a thread so that it does not fall apart, and secure the cable with the LED lamp.

Be safe - do not use regular incandescent lamps, they heat up the paper and it may catch fire.

Paper butterfly chandeliers

The most popular paper chandelier is the butterfly chandelier. And such love for this product is not just:

• Firstly she looks very chic and expensive.
• And secondly The production is very simple, even a child can be involved.

Such an elegant lamp will go well with any interior style, and it is also appropriate in the living room or dining room and even in a children's room.

Manufacturing technique:

1. It is taken as a basis old chandelier or a frame from it. If this is not the case, then you can take a regular metal or wooden rim. If there is no such thing, take a thick wire and make 2-3 coils of yourself, so that you get a circle.
2. Cut out butterflies according to the template (butterfly template below)
3. We take a nylon thread or fishing line and attach butterflies to it. There can be two types of fastenings: either we pierce the butterflies or we put them on silicone glue. Whichever is more convenient for someone.

Butterfly pattern

To make a chandelier with butterflies, simply take a template and scale it to your size. It looks very nice if you make butterflies of several sizes, for example 3-4 diameters. Using a pencil, draw the sketch on paper and cut it out.

• It is best to cut with stationeryknife or straight manicure scissors without curves.
• It's better to use paper more dense and which does not attract dust, for example velvet structure. Since you will have to vacuum such a chandelier often

Also a very beautiful option is obtained if you make a ball out of wire, take as a basis an old pendant from a chandelier and place it using glue gun several butterflies.

Paper ball chandelier

The basis for such chandeliers is a ready-made Chinese lamp made from a ball of rice paper. They are usually very cheap, down to 1-2 dollars. But you can decorate it however you like with paper tartlets, an unnecessary map, newspaper or sheets of old books. We are publishing several ideas for decorating a ball chandelier with paper.

Paper New Year lamp

A regular idea for the New Year is to use an old lampshade and string snowflakes of various shapes onto a string. Very impressive and beautiful. Below are a few photo ideas such decor for the new year.

To polish your skills, as well as to replenish your collection with extraordinary beautiful lamps, see more ideas and . We are sure that among them you will find many that you will definitely want to create!

2 ratings, average: 5,00 out of 5)

Nowadays, many people strive to ensure that their home always has an atmosphere of comfort and beauty. As a rule, we do this using different ideas helping us to decorate the house in a certain style. We also try to decorate our interior various elements decor, bringing into it some kind of mystery and originality.

In this article we will focus on such important detail interior, like a hand-made lampshade. If your favorite lampshade is completely worn out, you can always decorate it, thereby breathing into it new life. You can also make it yourself for a floor lamp, night light, ceiling or floor light source.

Advantages

Two hundred years ago the first lampshades were created. This interesting name came to us from French and translated means "muffled light". As a rule, they were made of leather, wood or fabric, but lampshades made of multi-colored glass and crystal were especially popular and fashionable in those days.

You can also use any materials you like when making this beautiful and elegant decorative element for your lamp.

In order to decorate the lampshade for the lamp yourself, you need to choose it with not too much complex design, so for this purpose the simplest floor lamps and night lamps will suit you. They can be either floor-standing or hanging. After all, interfering with their simple mechanism of a vertical base and a round frame will not be a big problem for you.

Usually it is very easy to select parts for such lamps or replace them with a frame made of wire, wood or metal. The main thing is that the lamp with the lampshade stays very firmly on its structure.. At the same time, the floor lamp with lampshade will never be damaged or fall, and you can safely move it to any place convenient for you.

Master classes with descriptions

Making or decorating lamps with lampshades is a creative and interesting activity, and at the same time very fruitful: it gives the opportunity not only to make unique element decor, and in full accordance with the style of the room, but also helps to save cash. You just need to buy the most uncomplicated floor lamp or night light for little money and decorate it to suit every taste. They will help you with this various techniques manufacturing and materials.

At home, you can create lampshades to suit every taste. For this you will need any working night light, lamp or floor lamp, as well as the frame and base for them. The lamp must be LED or energy-saving so that the material from which your lampshade will be made does not deteriorate. When making such a decorative item, you must carefully follow all safety standards, because working with electricity can pose a potential risk of fire or electric shock.

Try not to use materials that are flammable or have a toxic composition when working, so as not to harm yourself and others. You can also make a frame of any shape yourself from wire or purchase a ready-made one in advance.

The most unusual things can be used as items to decorate a lamp, from children's toys to building materials or objects made of plastic and paper.

Made of wood

They are considered the most durable and moisture resistant wooden lampshades, which will serve you for a long time and at the same time fit into any interior in a classic or modern style. But usually they are of great relevance for a bath or sauna. To make such a lamp from wood with your own hands, you will need a roll of paper, a simple pencil, wood and self-tapping screws.

Using these materials, you can make a corner lamp:

• To do this, draw a trapezoid-shaped frame layout on paper. Please note that the side parts must match the wall on which the lamp will be mounted.
• Next, take the wood and apply the design of the layout onto it and cut it out. Wood can be treated with paint or varnish. Of the three wooden planks one centimeter wide and half a centimeter thick, make a frame.
• Combine the top and bottom of this frame on the sides and in the center. Measure the distance from the middle to the edges and cut several more planks of the same size. The planks must be fastened with self-tapping screws from the inside.

• You can also make a lamp from vines or dry branches. To decorate a lamp from dry branches with your own hands, you will need twigs various sizes, lamp, base for lampshade, glue, paints, brushes.
• Before gluing branches to the base, sand it sandpaper, then wipe with alcohol. This way the branches will stick better. Next, take the branches and glue them in different orders to the base in a circle.
• After the lampshade is completely dry, attach it to the lamp.
• To make the lamp look bright and modern, paint the branches silver or gold. acrylic paint. By combining these shades, your lampshade will turn out to be in a Nordic style and will decorate any interior.
• You can also add various decorative elements in the form of pine cones, chestnuts, feathers, artificial leaves, beads or sparkles.

Weaving from vines and branches has never lost its relevance, and if you want to please yourself, as well as create interesting items decor for the home, then you can do it yourself, only by studying the sequence and rules of working with such material as wicker.

To weave a lampshade or various objects, you can use branches of all varieties and you. This should be done in the spring before the first shoots appear on the branches, so that the product turns out to be of high quality and lasts a long time. Excellent material will be branches of willow, straw and reeds, which are also prepared in advance. As a rule, this happens in the autumn season. And twigs are suitable for a solid base of products walnut and willow.

You can select different sizes of rods for the product and use them to make ribbons for decoration. You can also change the color of the product by holding it in water for some time. This will give it a more sophisticated look.

From paper

The advantage of a material such as paper is its availability and ease of manufacturing products of any shape. A lampshade made from newspaper tubes is one of the most popular and creative ways. To weave such a lampshade you will need newspapers or magazines, a bottle, scissors, glue, disc, paint or varnish.

Operating procedure:

• The tubes are prepared in advance by rolling and gluing; they also need to be dried well.
• Next, we cross three tubes, place a bottle on them and weave in a spiral. Thus, the lampshade is expanded by placing tubes on top of each other. Thus, we reach a certain size, glue and cut off unnecessary tubes. After this, you need to paint the lampshade and varnish it.

It will be very easy to make paper lampshade with butterflies. You can also use various fakes using the origami technique.

The frame of the lamp is taken as the basis of the lampshade. Next, we cut out a large number of butterflies according to the template and secure them to the frame with transparent fishing line or white thread. This product will look very original and will fit well into a child’s room.

To decorate a paper lampshade, any decorative elements will do. Let's look at a few useful ideas for decorating such lamps. To add a little extra flair, buy some butterflies from an office supply store or make your own. Next, attach it to your lampshade. Such a decoration idea lighting fixture Any child or teenager will love it.

Even more original idea is to decorate the lamp with special aromatic bags containing dried herbs and essential oils. This will create a romantic and cozy atmosphere in your room or bedroom.

The pleasant aroma of herbs and flowers will always be present next to you.

If you are fond of collecting herbariums of flowers and leaves and decide to use them to decorate a lampshade, then you definitely can’t go wrong by creating one. unusual element decor. You just need to glue them onto the finished lamp and let the glue dry. So you can do it lampshaded in rustic style , which will decorate any interior in the country or in the house.

Wallpaper lampshade would be a great idea. Its creation does not require much expense or effort. Let's consider the most interesting option, made in the form of an accordion. To do this you will need a lamp frame and wallpaper. On the section of wallpaper you need, draw stripes, the distance between which will be at least two centimeters. Then fold the wallpaper into an accordion shape and make holes on the top of the piece. Then you need to thread a lace through them to secure and glue the structure.

Another idea for creating a lampshade is from a napkin. To do this you need to have glue, openwork knitted napkins and balloon IR. Next, take napkins and coat them with glue, place them on the balloon and wait for them to dry completely. The ball can be pierced or lowered, and a light bulb can be attached to the resulting lampshade.

Napkins can also be paper. Cut them into equal parts, coat the lamp with glue and glue it to its surface. You can attach a ribbon or braid to the bottom or top of the lamp, which will give it a more vintage look.

From scrap materials

To make a lampshade from scrap materials, you should first decide what materials it will be made from, and you also need to have a frame for the lamp. This base can be a balloon or ball.

Another material option for creating a lampshade frame is a regular five-liter plastic bottle. To do this, you will need to cut off the top of the bottle and paint it from the inside with any light paint, and outside blue or green. To make the edges of the bottle look neater, stick tape on them that matches the color of your lampshade.

You can do it with your own hands lampshade made from plastic cups. To do this you will need a stapler, wire, a wooden base and a lamp socket. Next, the glasses are fastened in a circle to each other, and on wooden base a socket with a lamp and a structure of cups are attached.

Such an original and practical lampshade will serve as a worthy addition to your interior.

Any available material can be used to design a lampshade. Cocktail straws are no exception. To do this, you need to prepare about two hundred straws, which we glue onto the glass base of the lamp using construction glue. And from finely chopped multi-colored tubes you can make a small night light in the shape of a cube.

The most easy solution decoration is to glue cocktail tubes vertically to make the old lamp even brighter and more beautiful.

It won't be too difficult to make lampshade made of simple galvanized wire and beads. To do this, you will need wire cutters and pliers to give the wire different shapes. These can be curls, leaves, hearts, circles and patterns. Such simple design will look very original. You can also make a wire base and stretch fabric or leather over it.

Cardboard lampshade with your own hands is very easy to make and will be distinguished by its unusual appearance, and will find a place in any room. To do this, you will need to cut out four frames from durable cardboard and attach them to them with reverse side using lacing fabric. For this, not only ordinary threads can be used, but also various ribbons or braid.

Thus, you will get a flashlight, which additionally needs to be glued with glue. After that, you can paint this unusual lampshade in any color and install it on the lamp.

Cork or self-adhesive paper can also work great when making a lampshade. To start with old lamp Apply silver paint, then cover it with cork paper. Glue branches on top of them different sizes. And if you have felt left over, you can sew a new lampshade from it. To begin, make a pattern for the base of the lamp, sew its parts and pull them onto the base. Decorate with various applications.

From threads

The most environmentally friendly option for your home would be a lampshade made from twine or twine with your own hands. To work you will need threads of two various colors or varieties, a needle, a balloon, glue and a cup. In order for the thread to be saturated with glue, it must be threaded through a glass of glue or a jar of glue must be pierced. This can be done using a needle.

Next, take the ball and draw a circle on it for the hole for the light bulb, while wrapping the ball so as not to touch this circle. After this, we leave the ball for a while so that the glue dries well and the structure does not deform when the air is released from the ball. Next, insert a cartridge from the hole into the hole. old lamp and attach the resulting product to the ceiling.

Another unusual way decorating a lampshade is crochet it. To do this you will need a base for the lampshade, yarn, a crochet hook, and glue. According to the knitting pattern, knit two openwork products required size and go all the way around the lampshade frame. Patterns can be varied.

To give smooth appearance product, apply a mixture of water and glue, diluted in equal proportions. During drying, you can give the lampshade any shape. Next, install it on a floor lamp or lamp.

And in order to make a wicker lampshade with your own hands, purchase a frame from an old retro-style lamp. This element will make your interior unusual and emphasize its advantages. To make it you will need threads, glue and a spray bottle. Wrap the base of the lampshade using random and simple movements.

Make sure the threads are wrapped tightly. After this, dilute the glue with water and spray it on the threads from a spray bottle so that after drying they hold a certain shape.

Manufacturing jute lampshade will become great ideas for those who want to decorate their home. To do this you will need jute thread, glue, wire, decorative leaves. First you need to make a lampshade template that will match the lamp frame. We attach screws or nails to the finished template. Then we stretch the thread along the contour of the layout and drag it vertically along the entire contour. Next, we weave horizontally and treat it with glue.

Immediately after drying, remove the product from the layout and glue the side parts. In order to decorate the lampshade, we take decorative ivy leaves and attach them with wire to the base of the lamp. This lamp will create a fabulous atmosphere in your home.

From fabric

First you need to choose the fabric for the lampshade. It can be fabric of any density and stiffness. The choice of material will depend on what the lamp frame is made of, but preference should be given to dark fabrics rather than transparent ones, as this will be more practical.

To ensure that the color of the emitted light is cold, use a fabric in blue or green shades, and for cold light choose yellow shades or red.

If the base for the lampshade is made of wire, it must be painted or wrapped with tape to prevent the fabric from deteriorating over time. The product can be sewn by hand or by sewing machine. You will also need an iron, pencil, tape measure, thread and glue.

First you need to take measurements and cut out a template that will fit the lampshade frame. Next, cut out the pattern according to the template and match the threads to the fabric. We sew the parts using a sewing machine and then smooth them with an iron. The next step is to glue the product to the base of the lamp. In this case, you need to carefully hide the seams, tightly fitting the frame. Just dry the finished lampshade and put it on your lamp.

It can fit very interestingly into the interior lampshade made of burlap. This fabric transmits light well. Her main feature is that it can be decorated with some decorative details, buttons, beads, artificial flowers or openwork lace. You can also write on the burlap with special paint.

Another idea for making a lampshade will appeal to many. It will be made in the form flared lampshade in a cylindrical shape. You can match it with any fabric to match the color of your furniture or sofas and armchairs. You don't have to worry about the density of the fabric, because it can be made more durable with glue or starch.

Measure the diameter of the base of the lampshade frame from the bottom and top, as well as its height. Next, make a pattern on the fabric with a margin of a couple of centimeters according to the measurements that you took from the lamp frame.

Any decorative element can decorate such a lampshade, for example, simple bows and ribbons will do.

Thin fabric in dark colors can also be stretched over the frame of the lamp. But its peculiarity will be that on the inside there will be cardboard in which you can cut various shapes. These can be various butterflies, animals, plants. The main thing is that the cut out silhouettes can be easily distinguished when the light is on, which will come from your lamp. Thus, we will get an original lamp and a peculiar play of shadows.

Decor ideas

If the lampshade looks very boring and inconspicuous, it can be decorated in an original way. Next we will consider interesting solutions who can help transform your lamp. To do this, you will need thick fabric or multi-colored scraps. For example, if you decide to decorate your lamp in Provence style, then you will need fabric in a blue, light green, or pink shade, since this style is characterized by pastel colors, a checkered or floral pattern.

To start making a lampshade, select a suitable fabric for it and cut out two strips. From one, make a bow for the top of the base of the lamp, and sew lace or braid to the other strip. The fabric can be decorated with various beads, buttons or covered with sequins. Don't forget to trim the edges of the fabric and attach or sew a second strip around the base of the light. Attach a bow to the top of the lamp in the same way.

You can also use fringe or knitted napkins in decoration, as this will give your lampshade more sophistication and luxury.

Another interesting idea is to decorate the lamp with flowers and leaves made of pastel-colored fabric. You can make roses from ribbons or ordinary chiffon fabric and decorate the entire lampshade with them. This lamp will find its place in any room, especially in the bedroom or nursery.

A good idea for decorating a glass lampshade would be to stick a photograph or picture on it that will glow even in dark room. You can also apply stained glass paints to the glass or paint it. And from unnecessary scraps of scraps you can make an interesting applique of floral motifs and sew it on your lampshade.

Do you want to make the interior of the room more diverse, but at the same time you don’t need to spend too much money? But you yourself can make a lampshade out of fabric, oriental style, which will look very original and will decorate absolutely any room in the house.

How to make a lampshade with your own hands?

First you need to make a blank required material. You will need: glue and scissors, thin paper and a light bulb, rope and a balloon.

So, take your balloon and inflate it to get a medium size.

Take a tray or some container and pour glue into it.

It’s better to take two papers different colors. It should be torn into narrow strips.

Next, these strips need to be applied to the balloon. Attach the first one (any color) first. Then you need to apply glue to the same strip. Thus, you need to glue strip after strip. Order may not necessarily be geometric; you can also use randomness, this is everyone’s business. In general, you need to glue in the same way, strip by strip, until the entire ball is completely sealed. Hang the paper-covered ball to some clothespin and wait for it to dry completely. This will last for about a couple of days.

When your ball is dry, take a marker and draw some design on the ball. These could be some interesting and unusual hieroglyphs, for example.

The upper part of the ball should be used for the hole for the light bulb. To do this, you need to cut this hole in it with ordinary scissors.

Thread a pre-prepared lamp into the resulting hole.

This flashlight can be mounted anywhere. You can use a small wooden stick to attach the light bulb.

And so, now you should not have any serious question about how to make a lampshade for a lamp, since your lantern is ready and you made it with your own hands!

And if your acquaintances and friends ask about how to make a lampshade, you can show off your own masterpiece of art!

In fact, you can make the most varied lanterns with your own hands that you can imagine, or maybe not...

Usually, insufficient attention is paid to the issue of lighting design during the renovation process, which is why subsequently people not only find themselves in twilight, but also suffer from lack of thought. In this case, you can not only buy a lamp, but also make it yourself, and this option will be the most original and unusual. But there are a huge number of options for creating them, and here are the main ones.

• Photo flashlight option with your photographs. To do this, you should prepare a photo for printing, paper and a printer, a paper lantern, glue and ribbon, a cup and a brush, a knife and a template sphere. And here the most difficult thing is to get into required sizes in the process of correctly cutting the sphere. There's nothing to worry about anymore. Glue + hands will do everything intuitively. By the way, you can make a whole family row of such lanterns.
• Bamboo chandeliers. To make them, you can use ordinary bamboo curtains with thin ribbons, glued together with ordinary glue and clothespins into balls. Then the light source itself is added there and voila! This option is fast and budget-friendly.
• A lamp in which the lampshade is made of cork.
• Chandelier made from a variety of cans.
• The lamp is made from waste paper, that is, old magazines are used to make it.
• Lamp in the form of a light cloud. This lighting option is temporary, but it is perfect for decorating any kind of celebration. The main thing that is needed to make this type of lighting is cotton wool and ready-made paper lanterns, as well as hands, desire and working hands.

Photo instructions on how to make a lampshade with your own hands

When you want to change the decor in your apartment and add a little originality to it, start with the little things. Try changing the lampshade, and you will be surprised at the transformation of your family nest.

And if you manage to find an original model that differs from analogues, then the changes will impress not only you, but also your guests.

Is it true, unique lampshades they cost a decent amount of money, because you can’t buy one-piece works by famous masters for pennies.

But no one is stopping you from creating your own unique masterpiece from cheap, and sometimes even waste materials, which will look much better than the samples presented in the store.

All you need are simple materials, a little patience and a flight of imagination, and we will tell you how to make a lampshade with your own hands.

Materials

You can create a masterpiece from everything you have at hand: fabric, paper, thread, twine, wire, plastic bottle, beads or beads.

In general, absolutely everything is suitable, even what you usually throw in the trash bag.

Don't believe me? Just look at the photo of the lampshade.

Frame

If you have a frame from an old lampshade, then that's just great.

However, don’t be upset if you don’t find one, because you can create a frame yourself from ordinary wire.

Copper, aluminum, steel - anything that you can independently combine into a single structure will do.

The metal frame of a classic lampshade consists of three rings and six jumpers between them. The small ring is a holder, which is connected by three jumpers to a ring of a larger diameter.

The same, in turn, is connected by jumpers to the last ring. The following photos will help you understand the design.

From fabric

When you have a frame for a lampshade, the easiest way to create your masterpiece is to wrap the base in fabric. For this you will need:

• paper (newspaper);
• scissors;
• textile;
• chalk or pencil;
• threads

Wrap the frame with newspaper in such a way as to form a pattern out of it. Then transfer the resulting shape onto the fabric using chalk, adding 1 cm to the seam on each side.

Make a pattern, cut off the edges and sew the sides, forming a cover for the base of the future lampshade. We bend the upper and lower edges of the “cover” in such a way as to close the frame rings and secure them with a seam.

Note!

Voila, your lampshade for the floor lamp is almost ready. All that remains is to add a few highlights to your taste, making it unique.

From threads

How to make a lampshade when there is no frame? As easy as pie.

Take a balloon without drawings, glue, thread, marker and start creating.

First you need to inflate the balloon and mark on it the upper and lower boundaries of your future masterpiece. Then take the threads and wrap them around the ball, trying not to protrude beyond the marked contours.

Apply glue diluted with water 1:1 to each layer of thread. When the thickness of the wound thread satisfies you, fix the cut edge and hang the ball to dry. After 3-4 hours the threads will dry. Then pierce the ball and carefully detach it from the walls of the finished lampshade.

Leaves and flower petals woven between layers of threads can add additional charm to a thread lampshade.

Note!

A ball decorated with sparkling drops of beads also looks original. In general, watch and be inspired.

From paper

Ordinary sheets of office paper, glossy magazines, a cheap newspaper, an unnecessary book or an ordinary notebook, a paper towel or napkin - these are all future lampshades.

It doesn’t matter whether there is a frame or not, the main thing is that you have scissors, glue and paper. A thousand and one versions of such lampshades can be described with the words “cut and stick”.

The main thing is not to forget a few simple rules:

• It is safest to use a paper lampshade together with economy light bulbs, which heat up significantly less than incandescent bulbs;
• the diameter of the lampshade should be large so that the paper does not heat up excessively;
• for a light room you can make a lampshade from thick paper, but for a dark room you need a thin one that transmits light well;
• be careful with color. For example, red or yellow paper will add warmth to the room, green and blue will add coldness.

Well, that's all. Charge yourself with new ideas, arm yourself with the means at hand and move forward to easy changes that will bring warmth and comfort to your home.

Note!

DIY lampshade photo