Wall-mounted boilers DE DIETRICH. Gas boiler De Dietrich - review of floor and wall models Prestigious brand products

Gas boiler De Dietrich - review of floor and wall models

5 (100%) votes: 2

The De Dietrich gas boiler is a standard of quality and an example of heating technology; it competes with other successful units. These French devices are very economical, their operation is efficient and reliable. The difference between De Dietrich boilers is a special heat exchanger made of cast iron, which is characterized by high strength and for a long time services. Given technical solution contributed to increasing the productivity of equipment, increasing its efficiency and extension of the operational period.

Sectional high-performance boiler with cast iron heat exchanger De Dietrich GT124

From the history of the company

Among French manufacturers of heating equipment, De Dietrich is considered the number 1 brand. Developers gas equipment They try to achieve its maximum energy efficiency and environmental friendliness.

You can find out the price and buy heating equipment and related products from us. Write, call and come to one of the stores in your city. Delivery throughout the Russian Federation and CIS countries.

The history of the brand is very long, it begins in 1684 with the acquisition of a small forge by Jean Dietrich, the founder of the company. In 1778, the company received a logo from Louis XVI. The brand is considered the oldest in France. In 2009, the company merged with the huge Baksi concern. Currently it is part of the BDR Thermea holding. Every year, 300,000 boilers are produced under the De Dietrich brand.

Advantages of units

The De Dietrich gas boiler has incomparable advantages over competitors' products, namely:

Copper heat exchanger coated with aluminum and silicon dye, which increases the heat resistance of the metal.
Two valves in the gas block, which are responsible for safety, as well as a power modulation device.
Atmospheric burner made of of stainless steel has a ramp that makes the pressure stable.
Electronic ignition. The intensity of the flame is controlled.
Electronic control panel with display.
Possibility of expanding control by connecting thermostats inside and outside the house.
The hydraulic block, which is made of composite materials (in MS 24 and MS 24 FF - brass), has a pump with two speeds. The unit is equipped with pressure gauge, and a drain valve, and an automatic bypass.
Models with an open combustion chamber are equipped with a draft sensor, and those with a closed combustion chamber are equipped with a relay that responds to air pressure.
IN heating circuit There is an expansion tank of 6 liters.
The boiler is completed mounting plate for wall mounting.

It must be said that all Dietrich gas boilers cost a lot - from 30 to 100 thousand rubles, depending on the series and power characteristics. At the same time, there is no doubt about the reliability, quality and long service life of the equipment.

Possible problems

Owners of these French boilers will be notified special signal in case of operational problems. When an “error code” appears on the display, you just need to open the instructions and find the corresponding decoding. As practice shows, you almost always need to contact a service center, because a high-level assembly also requires professional service.

De Dietrich gas equipment is traditional quality and modern technologies. This technique differs from competitive devices in the following features:

Burner. Different models use design solutions that allow the installation of equipment with forced and natural air supply into the room. Atmospheric units from Dietrich gas make it possible to feed a ready-made gas mixture into the furnace. Mixing with air is carried out in a special injection chamber. This significantly increases efficiency. French gas burners can use the principle of forced air injection. IN in this case efficiency is achieved due to the rapid heating of the heat exchanger.
Heat exchanger. Special attention For this parameter, it is worth paying attention to a condensing type boiler. It works on this principle. Classic water heating devices are characterized by big amount heat losses for the smoke removal process. Mounted De Dietrich almost do not have this drawback due to the fact that the smoke is removed in a broken way. That is, the chimney repeatedly changes its own direction. Thus, heat accumulates, and the air leaving the chimney is barely warm.
Electric ignition. All models of French boilers are distinguished by the possibility of such ignition. The boiler automatically turns on when the burner flame goes out. This solution saves gas and eliminates the need to constantly burn the pilot light.
Configuration. The De Dietrich mounted gas boiler is perfect for heating small houses and cottages, as a rule, it is used for domestic needs. When the heating area is large, it is recommended to use floor-standing units that are larger in power and more efficient. If you wish, you can buy equipment that will function on a mixed system fuel supply(bottled and natural gas).
Additional features. Various models boiler equipment have certain options and capabilities. Many modifications are low-temperature, helping to maintain a temperature regime that is automatically adjusted depending on the time of year.

When choosing this heating equipment, you should pay attention to the following nuances:

Location. Technical parameters of the building and the need for heating large area may influence choice a certain model. Let's say a De Dietrich floor-standing gas boiler is characterized high performance and can easily heat a large room. Often this model also has a built-in water heater. This solution is very profitable, even better than having a second circuit. The downside is a lot of weight. And this may cause additional preparatory work. Wall mounted is smaller in size, it saves space and can be mounted on any supporting wall.
Marking. It also plays a role; you should pay attention to the markings when choosing the optimal unit. Let’s say that the De Dietrich floor-standing boiler of the DTG line operates only on natural gas, and the GT series models operate on diesel fuel or gas, etc. These models can usually be mounted on the floor. Mounted gas units are the MS line, equipped with a remote control, a weather-sensitive sensor, they are the most comfortable for the user.
Multifunctionality. You can buy a device with a built-in boiler or with the ability to heat liquid using the flow method. Typically, a De Dietrich mounted boiler is a 2-circuit type, because the main requirement for such a model is considered to be light weight; in this case, the use of a large built-in tank for heating the liquid is impossible.

Please note that almost all appliances: gas floor-standing boilers De Dietrich and mounted models- dependent on energy. This means that for their stable operation it is necessary to install a power supply or. It is worth saying that the electronics in these models react quite sensitively to changes in electrical energy, and this drawback can be solved by purchasing an additional surge protector or power rectifier.

Mounted models De Dietrich

Dietrich wall-mounted gas boilers are low-temperature condensing devices that function to heat and preheat water for domestic needs. On average, as practice shows, the service life of units is 15 years.

ZENA MS

Gas convection boiler De Dietrich ZENA MS 24

This model of wall-mounted unit is single-circuit, with an open combustion chamber and automatic ignition. Technique is adjustable different ways– by electronic system or home sensor and outside temperature. The boiler is compact, so it can easily find a place in a small room.

Zena Plus

This model is presented in wall version, has two circuits - for heating and for supplying warm water. The boiler is low-temperature, with high heat exchanger productivity - up to 14 l/min. Power is 24-31 kW.

INNOVENS MCA

Gas condensing single-circuit boiler Innovens MCA 35

Excellent technology that embodies an innovative approach and high efficiency. The model is hinged, condensing. The efficiency is more than 100%. Recycles heat from exhaust gases. Electric ignition and modulating burner available. The unit is very economical, the only negative is its considerable cost.

INNOVENS PRO MCA

All De Dietrich gas boilers in this line are small in size and have high power - up to 115,000 W.

NANEO

Condensing double-circuit boiler Dietrich Naneo PMC-M 24

This is a wall-mounted unit, with two circuits for heating and hot water supply, with a turbocharged system. There is protection against pressure drop, flame extinguishing, liquid heating and lack of traction.

Boilers of this series are very economical. Compared to similar traditional devices they save up to 40% of energy resources. And for all that, they are characterized by compact dimensions and a low weight of 25 kg. For regulation purposes, a removable control panel is provided.

MCR-P

This is a De Dietrich mounted gas boiler, condensing. With low power - up to 39 kW, but high efficiency. The model is easy to install, the depth is only 40 cm. Based on the connected device, they can operate in both a storage and flow type.

Of course, these are not all models. There are a lot of mounted boilers in the De Dietrich company's assortment. In this case, only the main lines were considered, which will give an idea of the capabilities of units of the popular French brand.

Floor models De Dietrich

De Dietrich floor-standing gas boilers are high-power equipment of large dimensions. As a rule, they are purchased for heating houses, buildings, and industrial premises. Such devices require a separate boiler room that will comply with operational standards.

DTG 230

Gas floor-standing atmospheric heating boiler DTG 230-10 with control panel

These are low temperature boilers made of cast iron. They are easy to install and maintain. They have a 2-stage burner available. Pre-mixing of gas with air is carried out. If desired, the boiler can be converted to operate on propane (a reconstruction kit is available).

GT 336

This is a floor-standing single-circuit unit with connectivity. The standard equipment includes pressurized burners. If desired, the boiler can be converted to operate on liquid fuel.

DTG

This is a line of floor-standing gas boilers from De Dietrich with a power range of 18–48 kW. Boilers are manufactured specifically for the Russian climate. Manufacturing material – cast iron. Unit type – low-temperature, convection. The combustion chamber is open. There is weather-compensating automatic control. The series is intended for heating only.

The range of De Dietrich gas boilers is wide, and it is not limited to the above models. But no matter which boiler you choose from this company, it will be of high quality, durable and reliable source heat for your home. The brand has been a leader in the heating equipment market for many years, providing premium equipment throughout Europe.

Wall gas condensing boilers DE DIETRICH (De Dietrich) NANEO PMC-M and PMC-M ... MI

These are modern, highly efficient heating devices from the world-famous French company, designed to operate on natural gas or propane.
Operating principle of a condensing boiler consists in using the energy contained in the water vapor of combustion products (latent heat of vaporization). To obtain an average annual efficiency of about 109%, it is necessary to correctly calculate the area heating devices(e.g. underfloor heating, low temperature radiator heating etc.) to get as much as possible low temperature in the return line - below the dew point during the entire heating period.
Naneo series boilers are the most compact on the market!

The series of wall-mounted gas boilers from the De Dietrich company of the NANEO series is represented by the following models:

PMC-M 24: single-circuit boilers only for heating, power from 6.1 to 24.8 kW. To organize DHW, you need to additionally purchase a capacitive water heater BMR 80 or SR 130.
PMC-M 24 + BMR 80- with a water heater De Dietrich BMR 80, with a capacity of 80 liters, which is installed to the right or left of the boiler;
PMC-M 24 + SR 130- with a water heater De Dietrich SR 130, with a capacity of 130 liters, which is installed under the boiler.
PMC-M...MI: double-circuit boilers for heating and DHW flow type with a plate heat exchanger, power from 6.1 to 35.7 kW (in DHW mode power 37.8 kW). DHW comfort level - 5 stars in accordance with EN 13203, is ensured by a plate heat exchanger with large area heat exchange.

De Dietrich wall-mounted gas condensing boilers PMC-M 24 and PMC-M...MI are supplied fully assembled and factory tested and pre-set to operate on natural gas. The boilers can also operate on propane after simple adjustment using a modulating thermostat room temperature or service module (supplied as additional equipment).
PMC-M 24 boilers are initially equipped with a heating/DHW switching valve for connecting a DHW cylinder.

Advantages of De Dietrich wall-mounted gas boilers of the NANEO series:

All the advantages of condensation in a compact design - lower fuel costs. Savings of 30% to 40% compared to a classic old generation boiler!
Fully pre-set condensing boilers;
Very compact: 368 x 589 x 364 mm;
Very light boilers with innovative design - weight only 25 kg;
Equipped with a highly efficient, compact cast heat exchanger made of aluminum-silicon alloy;
Extremely easy to use and highly efficient gas condensing boilers.
Minimum level of emissions of harmful substances into the atmosphere.
Hot water capacity up to 19 l/min in compact design (PMC-M-MI);
Quick replenishment of the volume of hot water for constant water supply (models with a capacitive water heater);
Burner power modulation from 24 to 100%;
Heat exchanger made of aluminum alloy with silicon provides: chemical resistance to acidic condensate flue gases; very good heat conductivity (5 times better than steel); low weight (3 times lighter than steel) allows you to get a compact boiler and simplifies it Maintenance; the high fluidity of the alloy makes it possible to manufacture a heat exchanger complex shape with a large heat exchange area; reduced water volume ensures high reactivity of the heat exchanger; environmentally friendly material with the possibility of recycling and reuse.

Technical characteristics of gas condensing boilers De Dietrich PMC-M 24 and PMC-M ... MI:

Boiler type: condensing
Maximum operating pressure: 3 bar
Maximum operating temperature: 90°C
Safety thermostat: 110°C
Power: 220 V, 50 Hz
Efficiency up to 109.2% (at 30% of the boiler’s rated power and temperature conditions 50/30°C).
Nitrogen oxide emissions: NO 60 mg/kWh: class 5 bc

Technical characteristics of wall-mounted gas boilers Di Dietrish

Features of wall-mounted gas boilers De Dietrich NANEO PMC-M 24 and PMC-M ... MI:

The boiler can be equipped with a mounting frame or a kit for hydraulic connection (additional equipment);
Gas boilers De Dietrich PMC-M are designed as new heating installations, and for replacing old equipment, thanks to kits for replacing old boilers (additional equipment);
Various configurations are possible for combustion air intake and combustion products removal: vertical or coaxial chimneys, connection to a chimney, separate pipelines for air intake and combustion products removal, connection to a collective sealed chimney (3CE p).
Composition of the gas/air module: modulating gas burner with a modulation range from 24% to 100%; check valve for working with a collective chimney under overpressure; central module; Venturi tube; fan with noise suppressor for supplying combustion air; gas supply tube;
The hydraulic module contains 1 speed circulation pump heating (modulating pump class A - optional equipment), heating/DHW switching valve, plate heat exchanger with large heat exchange area for heating domestic hot water in models PMC-M ... MI, safety valve 3 bar, flow limiter, flow sensor for models PMC-M...MI;
Expansion tank with a capacity of 8 liters, built into the support frame.

Overall and connection dimensions of condensing boilers De Dietrich NANEO PMC-M

A very easy to use removable control panel is located under the PMC-M boiler. If necessary, it can be installed separately on the wall. The control panel and the central boiler module are connected via BUS.
Equipped with 2 knobs for adjusting the temperature: for heating and for DHW, as well as 2 keys with LEDs to indicate the status: “chimney sweep” and “reset”. The remaining parameters can be adjusted using various additional equipment: a modulating room temperature thermostat (setting the slope of the heating curve, maximum boiler temperature, etc.) or a service module.
Additional equipment is also available for control depending on room and/or outside temperature

De Dietrich chimney for boilers PMC-M 24 and PMC-M ... MI

Various configurations are possible for combustion air intake and combustion products exhaust:

horizontal coaxial chimney PPS Ø60/100 mm. with ending (DY 871) - type C13x;
vertical coaxial chimney PPS Ø80/125 mm. with black (DY 843) or red (DY 844) end + adapter (HR 68) - type C33x;
connection to a chimney (type B23p or C93x);
separate pipelines for air intake and exhaust of combustion products (type C53x);
connection to a collective sealed chimney (type C43x).

These chimney accessories must be ordered as additional equipment.
Connection to the heating circuit.
De Dietrich PMC-M boilers can only be installed on heating systems with a closed heating circuit that must be flushed to remove various particles remaining after installation, as well as sludge deposits that can cause the installation to malfunction. It is also necessary to protect the heating installation from possible corrosion, deposition of hardness salts and the proliferation of microorganisms using a corrosion inhibitor, which must be suitable for all types of heating installations (steel and cast iron radiators, underfloor heating with cross-linked polyethylene pipes). The chemical products used for treating heating circuit water must have appropriate certificates and recommendations for use.

Wall-mounted gas boilers DE DIETRICH MS 24

Traditional low temperature wall-mounted boilers De Dietrich series MS 24 and MS 24 MI are designed to operate on natural gas, with the possibility of converting to propane after installing additional equipment. You can buy models with an open combustion chamber for connection to a chimney or with closed camera combustion - for connection to coaxial chimney.
MS 24 FF boilers are single-circuit gas boilers designed for heating only, compact in size: 730x400x299 mm.
For hot water supply, cylinder water heaters can be connected to them, since boilers of this type are initially equipped with a heating/DHW switching valve:
– water heater BMR 80, with a capacity of 80 liters, which is installed to the right or left of the boiler;
– floor water heater SR 130, with a capacity of 130 liters, which is installed under the boiler.
De Dietrich MS 24 MI (FF) boilers use a plate heat exchanger with a large heat exchange area to produce domestic hot water.
MS 24 BIC (FF) are double-circuit, compact (965 x 600 x 466 mm) boilers for heating and domestic hot water with a built-in water heater with a capacity of 40 liters, with open or closed combustion chambers.

Boiler models:
Single-circuit boilers for heating only:
MS 24
MS 24FF: with a closed combustion chamber, atmospheric burner with fan.
Double-circuit boilers for heating and hot water supply
MS 24 MI: with an open combustion chamber, atmospheric burner without fan;
MS 24 MI FF: with a closed combustion chamber, atmospheric burner with fan;
MS 24 BIC: with an open combustion chamber and a built-in water heater;
MS 24 BIC FF: with a closed combustion chamber and a built-in water heater.

Control panel for gas boilers DE DITRISH MS 24

De Dietrich MS boilers are equipped with a simple and functional control panel with an LCD display on the front, which controls one direct heating circuit and a DHW circuit. As an option for this panel, you can install a room temperature thermostat and/or an outside temperature sensor (weather-compensated control), which provide 2 levels of comfort. The control panel contains a frost protection function for 2 circuits if the flow temperature drops below 5˚C. In addition, the control panel contains a full diagnostic system with indication on the display, an unlocking system for the heating pump and the heating/DHW switching valve.

Advantages of gas boilers DE DIETRICH MS 24

Primary copper heat exchanger covered with a layer of aluminum-silicon paint, which increases its heat resistance;
Gas block with 2 safety valves and external power modulation device;
Atmospheric burner with stainless steel ramp;
Electronic ignition and ionization flame control;
An electronic control panel with a digital display allows you to control the operation of the direct heating circuit and the DHW circuit (DHW sensor is an additional equipment).
You can expand the control capabilities of the circuit by installing a room temperature thermostat and/or an outside temperature sensor (optional equipment);
Hydraulic block from composite material(for MS 24 MI, MS 24 MI FF, MS 24 BIC and MS 24 BIC FF) or in brass (for MS 24 and MS 24 FF) contains: 2-speed pump with automatic air vent, automatic bypass, heating/DHW diverter valve on the return line, water pressure switch, drain tap, separator, 3 bar safety valve, pressure gauge; for models with DHW (MS 24 MI and MS 24 MI FF): stainless steel plate heat exchanger and flow meter with turbine for determining hot water flow, removable filters for heating and DHW circuits;
Draft sensor for models with an open combustion chamber, air pressure switch - for models with a closed combustion chamber (FF);
Exhaust fan and air pressure switch for models with a closed combustion chamber (FF);
Expansion tank with a volume of 6 liters for the heating circuit;
Mounting plate for wall mount(included in delivery);
Power cable for connection to electrical network

Specialists of the company "Thermogorod" Moscow will help you choose, buy, and install a DE DIETRICH wall-mounted boiler, will find an acceptable solution at a price. Ask any questions you are interested in, a telephone consultation is absolutely free, or use the form "Feedback"
You will be satisfied by cooperating with us!

Today the owner of the property, decider for its heating, a huge number of brands and models of heating boilers can be found on the domestic market. And some of the most profitable, reliable and durable units are the products of the famous French brand De Dietrich. Anyone can buy such gas-fired boilers from the TeplovodServis company, which is the official supplier of the brand.

Equipment Features

Among the main parameters of any De Dietrich boiler it is worth noting:

long service life (rarely does a unit have to be replaced earlier than after 20 years, although the manufacturer guarantees it for 2 years);
high levels of efficiency (at least 90%, and, when compared with conventional gas heating equipment, the average effect of the units exceeds 109%), due to which very low operating costs can be achieved;
wide choice of capacities various models. For De Dietrich boiler traditional type productivity ranges from 18-342 kW, and for condensing models reaches 1000 kW. Thus, with their help you can easily heat and small rooms 100-180 square meters in size, and large industrial facilities with an area of several thousand square meters. m.

In addition, any of the De Dietrich boilers, which you can buy using our catalog, either has an additional circuit that provides hot water supply, or can be quite easily equipped with a water heater or boiler, with the help of which it is also possible to supply hot water with quite a decent flow rate (from 11 l/min and higher). And most of them can operate not only on natural gas, but also on liquid gas.

Features of choice

When choosing any De Dietrich boiler model, you should pay attention to:

the size of the room that requires heating. It should be taken into account that the power of the unit and the heated area should be in a ratio of approximately 1:10;
availability of space for installation of equipment. If there is not too much space, you should opt for a wall-mounted model, although sometimes it is not suitable in terms of power. In other cases, a floor-mounted option will be required;
need for hot water. If you can't do without water, this is what you need. dual-circuit model(with or without boiler). When hot water is not a pressing problem, you can save some money by choosing a single-circuit option. And, if desired, it can later be equipped with a heater.

Delivery of boilers

We deliver in the shortest possible time - already on the day of purchase, the boiler will be delivered to the site and even installed by our specialists, if necessary.

The De Dietrich gas boiler is an economical heating equipment with a practical and ultra-precise control system. Moreover, the De Dietrich technique is one of the most durable.

Equipment from the French company De Dietrich

De Dietrich offers a large assortment range equipment, among which are the following types of boilers:

condensation;
atmospheric;
solid fuel;
diesel

According to the type of installation, there are wall-mounted and floor models. The power of floor-standing units for household use reaches 100 kW or more, which makes it possible to use them even in large rooms. Floor standing boilers operate on gas or liquid fuel.

For use in houses and apartments, the company produces single-circuit and double-circuit devices. The first type only heats the premises, and the second supplies the house warm water in any season.

What are the benefits of De Dietrich boilers?

Purchasing products from a French company implies a lot of advantages:

long service life - with careful operation and regular maintenance, installations can last 15 years or more;
easy integration into any heating system - among a large number of models you can choose the most suitable option for a particular room;
increased productivity;
budget consumption of any type of fuel;
small dimensions.

"De Dietrich" produces not only boiler equipment For home use. The company creates highly efficient condensing, solid fuel models with a power of up to 3000 kW. The cascade option (2-10 devices) is capable of ensuring the implementation of a heavy-duty boiler room.

First of all, home comfort is associated with warmth. Agree that it is impossible to imagine a full-fledged home atmosphere without a vital hearth. Of course, over the centuries the hearth has changed, the fireplace has turned into a boiler, but the function has remained the same - to create and maintain heat.

So, none other than the De Dietrich company knows everything about boilers. The company was founded in France in 1684 (more than 300 years ago!) by the French nobleman Jean Dietrich. Originally it was a forge. The founder loved his brainchild so devotedly and selflessly that soon his products gained wide fame, and he himself received the nickname “King of Iron.” In 1778, King Louis XVI of France granted the manufacturer a distinctive mark against counterfeiting in the form of a hunting bugle. This symbol is still the brand logo and a guarantee of quality.

Serviced by Hogarth Service

About products and solutions

Over the past centuries, the company has undergone an amazing transformation: from an ordinary forge it has grown into an industrial Atlanta manufacturer of household appliances with a worldwide reputation. It is De Dietrich that we owe the invention of the first gas stove in 1956, and in 1980 the company developed the first induction cooker for home use.

In 2005, cast iron and gas boilers brand De Dietrich received the French Design Institute Janus Award. Now do you understand why the choice should be made in favor of boilers from De Dietrich?

De Dietrich is a leader among manufacturers of heating equipment. According to their focus, boilers are divided into the following models: sectional diesel, wall-mounted, floor-mounted, boilers equipped with atmospheric gas burners, double-circuit and single-circuit boilers.

Single-circuit boilers are designed exclusively for heating indoor air and are equipped with a heat exchanger, thanks to which the boiler operates with maximum heat output due to the release of condensate, while double-circuit boilers have additional function boiler

The gas wall-mounted condensing boiler is highly environmentally friendly and economical in fuel consumption. In addition, it is simple and easy to use. If necessary, it is possible to choose a system that runs on both natural gas and propane.

Floor-standing cast iron boilers are created taking into account all modern engineering innovations and guarantee uninterrupted operation both natural gas and propane. They have a system of low-temperature modes, as well as safe ignition and protection against leakage of combustion products.

Important factor of choice

When choosing a boiler model, it is necessary to take into account the area of the heated room. If the area is large enough, then the model will need a higher power, such as the De Dietrich 24 boiler. This modification has high power and is equipped atmospheric burner, control panel, DHW circuit, pool circuit and a number of other useful functions.

De Dietrich DTG condensing boilers are adapted to operate on natural gas, and the De Dietrich MS series boiler is mounted exclusively on the wall, which significantly saves living space and is also compact and easy to use.

Burners of two options, gas and liquid fuel, are able to provide reliable, economical and stable operation by optimizing the combustion process. There are one and two-stage burners, which can be used in boilers from De Dietrich and in boilers from other manufacturers.

A distinctive feature of boilers of the French brand is vertical design with legs that can be adjusted to the required height. The steel tank and heat exchanger are coated with special enamel with a high quartz content, which significantly extends the life of the equipment and serves as shockproof protection. During installation, it is important to take into account all the technical capabilities of the equipment and carry out operation according to the instructions.