Moidodyr, come back, or something to clear the blockage in the bathroom and sink. Ways to clear a blockage in the bathroom - top effective methods Clean pipes in the bathroom at home

10/19/2017 1 1 541 views

How to unclog a bathroom at home? Thousands of people face this issue every day, since after some time, plumbing fixtures tend to become clogged, even if they were used as carefully as possible.

Sewage systems are prone to littering not only in private sectors, but also apartment buildings. There can be many reasons for contamination of the siphon and other water communications: human or animal hair, greasy deposits, pieces of rags, and other small waste.

All this negatively affects the permeability of water, since accumulations of soap scum, grease and other debris in inside pipes impedes its pressure. As a result, it appears bad smell, and the liquid leaves more and more slowly, or remains completely. Of course, it is necessary to resort to various methods cleaning to fix the problem and prevent it from recurring.

The main causes of blockages in the bathroom

Make sure that the contamination occurred only in your apartment, since in the event of a general blockage, housing office workers are required to take care of the problem. To do this, open the water in the bathroom and kitchen - if in one of the rooms the liquid flows freely, but in the other it is standing, then you should start cleaning the pipes.

Polluting factors

greasy plaque (you can get rid of it using various chemicals);
installation errors sewer system;
external debris: hair, wool, threads, paper, etc.;
unsuitable water supply system;
careless attitude when using plumbing equipment, as well as non-compliance with maintenance rules;
primitive choice of materials ( plastic pipes less susceptible to contamination than cast iron).

How to clear a clog using folk remedies?

Gradually decomposing debris stuck in the drain leads not only to the fact that the water does not flow well, but also to the appearance of a very unpleasant odor that spoils home comfort and comfortable living conditions. In order to quickly get rid of the problem, it is not necessary to seek the help of specialists, because it is possible to clean a clogged drain efficiently and at home on your own, using traditional methods. Cleaning methods:

thermal (using hot water);
mechanical (disassembling the siphon or removing debris using a plumbing cable);
chemical (use of chemicals);
pressure (using a plunger).

The choice of method is influenced by the material from which the pipes are made. For example, a plastic system can be damaged by boiling water or cable, and before using chemicals, you must read the manufacturer's recommendations.

plunger

The most common method is mechanical cleaning with a plunger that even a woman can use. This method can be used both to clean clogged pipes and for preventive purposes. The more often you use this cleaning product, the less often you will encounter problems associated with dirty drains.

Instructions for use:

The rubber bowl of the plunger must be thoroughly lubricated with Vaseline so that it fits tightly to the drain part.
Fill the bathtub halfway with water.
Make sure the plunger attachment is in firm contact with the drain, completely covering the hole.
Actively lift and lower the device with sharp movements to break through the debris that has formed on the walls of the pipe with air.
Quickly remove the plunger, making a final push.
Open to maximum hot water, which will wash away the pollution.

If the blockage cannot be completely removed, repeat the procedure again until the liquid drains normally. For cleaning purposes, you can also use a powerful vacuum cleaner that has a “reverse air blowing” function. The procedure takes place in the following stages:

find a small rubber ball (slightly bigger hole plum) and divide it in half. One half should be smaller in size than the other;
place the smaller half in the larger one, making a hole in the center that matches the diameter of the vacuum cleaner tube;
insert a vacuum cleaner tube into the hole made, securing the structure with clamps or electrical insulating tape;
connect the hose to the vacuum cleaner outlet;
press it to the hole homemade device and turn on the vacuum cleaner.

The action of this design is comparable to the operation of a plunger, however, a strong air flow from the device can quickly clear the blockage, without much physical effort.

Plumbing cable

A plunger is a fairly effective device for clearing blockages, but it only copes with small debris. For more global pollution, this method is not suitable, so to clean the pipe yourself you need to use a plumbing cable. The method is quite simple and does not require serious financial costs.

The essence of the method is to mechanically pull out debris using a cable. Contaminants can also be pushed into a wider part of the pipe. Under no circumstances should you use this cleaning method for plastic and chrome-plated pipes - there is a high probability that the device will damage the surface. To perform cleaning you must:

Wear rubber gloves.
Disassemble the siphon located under the sink.
Straighten the end of the cable.
Insert the end into the drain hole.
Use a circular motion to push the clog down the pipe.
Give 3-4 sharp pushes when the main debris is removed.
Pull out the cable.
Turn on hot water to completely wash off the dirt.

Tips for effectively clearing a bathroom clog with a plumbing rope

It is not necessary to purchase a plumbing cable in a store; you can make it yourself:

Take a small piece of flexible iron cable.
Bend the tip, fluffing it a little.
Wrap the cable in hard material, making it look like a handle.

For more efficient work take a second person to help you monitor the cable tension. While pushing the tip into the drain, you can ask your partner to make circular movements at the same time. After this, open the hot water without finishing the action with the cable. The flow of water and active rotation of the cable will perfectly remove blockages in the inside of the pipe.

Rubber hose

Another device that everyone can use at home is a rubber hose. To carry out the procedure:

Take the rubber hose and stretch it over the faucet, securing it tightly.
Place the unused end of the hose into the drain hole at the deepest part.
Open the hot water.
Use a pushing motion to clear out any internal debris.
Fill the bath hot water.
Remove the drain plug with a sharp movement. To achieve the best result, use a plunger at this moment - thanks to the pressure generated, the water will wash away any remaining contaminants.

Siphon cleaning

In order to get rid of an unwanted odor, or to prevent yourself from clogging at the wrong time, you need to clean the siphon from time to time. To clean the siphon, you need to perform the following steps:

place a rag on the floor under the siphon that will absorb liquid well, or a container so that subsequent cleaning does not take much time;
it is necessary to unscrew the shutter nut and remove the flask, then wait until all the liquid has drained;
Next, using chemicals, you need to thoroughly rinse the siphon and its walls so as to completely remove the plaque;
upon completion of this procedure, the entire structure must be assembled. The drain pipe should not focus on the siphon flask, because this will disrupt the water seal;
To check the tightness of the connections, you can simply turn on strong water pressure from the tap.

This procedure can be done both during blockages and for preventive purposes. It is recommended to flush the siphon approximately once every two to three months. This will at least prevent the appearance of plaque on the walls, which emits an unpleasant odor, and will reduce the chance of blockages to a minimum.

Soda and vinegar solution

Due to the fact that soda and vinegar can be found in every home, this method does not require financial expenditure and is environmentally friendly. Because these two substances react when they come into contact with each other, they can clear up more serious clogs. To clean pipes using this method, you must do the following:

First of all, pour the soda into the cup, and then into the drain.
Pour the same amount of vinegar into a cup and pour it down the drain again.
Close the drain with a plug.
Wait 15-20 minutes.
Rinse the pipe with hot water to remove any remaining baking soda and vinegar.

Lemon

Folk remedies are good because if a problem suddenly arises, it can be eliminated with improvised means, but their effect will be weaker. For light blockages, the folk method using lemon works well. To remove dirt in this way, you need to squeeze several lemons to obtain lemon juice. Then pour it into the drain hole (it is important to ensure that no bones get there). Lemon juice will remove stains within an hour or two. After this time, rinse the sink with hot water.

Salt, soda and cream of tartar

To use this method, you need to take a glass of salt and soda, and only a quarter glass of cream of tartar. Mix all components thoroughly and place in a box or container. Once a week, pour ¼ of the resulting mixture into the drain hole, then fill it with boiling water. After a couple of minutes you also need to flush the drain cold water from the tap. This method will help quickly and effectively eliminate a blockage that suddenly occurs, and will also serve as a good preventive measure to prevent it.

How to choose the right household chemicals

Household chemicals will help deal with various blockages in the pipe. At the moment, there are a large number of different chemicals designed to combat blockages. It is noteworthy that when using them, you do not need to use any other force. Mostly like this chemicals There are several types: in powder form, liquid, gels, foam and granular.

To choose the right product, you need to follow a few simple rules. If the blockage occurs in the bathroom, choose a product that can dissolve the hair. If there is a blockage in the kitchen, the product should be able to dissolve the grease. Also, when choosing a chemical, it is necessary to take into account the material from which the pipes are made. If the pipes are plastic, best choice will be granular or gel products. In addition, attention should be paid to the purpose of the substance. These can be both products intended to remove blockages and for prevention.

Any household preparations are primarily chemicals. Therefore, when using them, you should special attention treat the means personal protection. Any actions with such substances are carried out with rubber gloves, since their contact with the skin is extremely undesirable.

Video: how to unclog a bathroom at home?

Preventing blockages in the bathroom

In order to protect yourself from many problems, you should not wait until the pipes become clogged. Several steps should be taken simple recommendations on prevention, to keep your pipes clean.

First of all, equip the drain hole with a special mesh. With its help, less debris will get into the pipes, therefore, blockages will appear less often. But don’t forget to clean this mesh. It is recommended to perform this procedure after each hair wash.
Once every two to three months it is recommended to use chemicals designed to prevent blockages. Thus, the accumulated debris will dissolve without having time to form into large traffic jams.
To prevent clogs, you can use a plunger from time to time.

A clogged drain is always unpleasant. No water goes down the drain, which makes it simply impossible to use the bathroom, and all this is accompanied by a most unpleasant smell. In general, there is something to be upset about. But we don’t intend to do this; we’d better find out in the bathroom.

In most cases, the sewer becomes clogged due to improper use and to eliminate it? But it’s not always due to inattention, it’s just very difficult to keep track of what exactly goes down the drain. The cause of the blockage can be hair, various debris, pet hair, clothing pellets, etc. All these “joys” accumulate over time in the siphon or pipeline, creating a compacted lump and preventing the movement of water. The result is known - a blockage in the bathroom.

Where to begin?

First, it’s worth finding out whether the trouble you encountered is really a blockage. If just yesterday we saw that the water was draining quite quickly, but after some procedure (for example, cleaning the carpet or bathing a beloved dog), the drain has deteriorated significantly, which means a blockage has formed.

But if there was bad drainage before, you should seek help from a specialist who would check the height of the drain hole.

In general, whatever the cause of the blockage, it must be eliminated in any case. Keep in mind that removing a blockage in the bathroom is much more difficult than that; there is a special opening for draining the water.

Hydraulic cleaning

What if in this case? The resulting blockage is destroyed by the force of water hammer, which is carried out by a special tool, which can be the most ordinary plunger or an expensive hydrodynamic nozzle (this device is also called a hydraulic plunger). You decide for yourself which one to use.

Note! Using a nozzle is not inferior in labor intensity to a plumbing cable (but at the same time surpasses it in terms of efficiency).

Regarding a regular plunger, it is advisable to use it only in case of minor blockages, and even then in combination with chemical cleaning agents. Cleaning a bathroom using a plunger looks like this:

Pour some water into the bath (to cover the drain hole).
We push the plunger alternately towards ourselves and away from ourselves, thus provoking compression/discharge.
A hydraulic shock is created that will destroy the blockage.

Siphon replacement

In most cases, cleaning the siphon helps eliminate the sewer blockage, but if it does not help, then it is better to replace it this element new. Of course, it’s better for a specialist to do this, but if you want to do it yourself, it’s worth a try. To work you will need the following tools:

old rag (to wipe up water);
basin for dirty water;
screwdriver for unscrewing the bolt;
new siphon.

The procedure is approximately the same as for cleaning, but there are some nuances.

Place a basin under the siphon.
Unscrew the cap at the bottom of the siphon, holding the device itself so that it does not dangle. Do this slowly so that the water gets into the basin and not onto the floor.
Drain off all the water.
Unscrew the bolt.
Disconnect the siphon from the sewer hole.
Install new device, following the instructions for it.

Note! If you cannot unscrew the bolt on the siphon, then you should definitely contact a specialist.

We have already talked about . All points regarding the selection of a bath siphon are completely identical.

Removing hairballs from drains

When hair gets into the bathroom drain, it does not disappear anywhere, but forms a dense lump and settles in the pipeline. To remove hair, you need to use acid-based cleansers, which do an excellent job not only of hair, but also of soap residue.

This remedy can be the same “Mole”, which acts throughout the entire length of the pipes and eliminates such complex blockages as hair and paper. Another good drug– Deboucher, which penetrates into the very depths of the sewer even when completely clogged. If you use "Brawler" according to the instructions, the seals and pipes will not be damaged.

Also, many people say that it does an excellent job with hair in the sewer. depilatory gel. A tube of such gel is poured into the drain hole, and after 10 minutes it needs to be washed off. Hair clogged in the pipe will be completely dissolved.

Video - Removing a blockage in the bathroom using a spoon and shower

Cleaning the sewer pipe in the bathroom with “kitchen chemicals”

If for one reason or another it is impossible to use the drug, then it can be completely replaced with a product prepared at home, which will require the following ingredients:

a glass of salt;
the same amount of baking soda;
¼ cup cream of tartar (crystallized sediment formed during wine production).

Mix all this and put the jar in the cleaner, tightly closing it with a lid. If necessary, take ¼ of the contents of the jar, pour it into the drain hole and pour 300 ml of boiling water. After about a minute, turn on cold water and rinse off any remaining product. The procedure should be performed weekly.

Measures to prevent blockages in the bathtub

As we can see, you can deal with the blockage on your own. But preventive measures will be more effective, using which you can avoid such problems. Among these measures, the main ones can be identified.

If you follow all preventive measures, your bath will always be completely clean.

Many people have to deal with such a problem as a clog in the bathroom. Contamination can appear even if the bath is very clean, because there are many reasons for such situations. Of course, careful owners have to deal with blockages much less often, but they should also know how to most effectively clean pipes at home. This article discusses the most popular methods of getting rid of heavy and minor stains.

Causes

If not cleaned regularly, debris in the sewer pipe can cause serious plumbing problems. When the drain becomes clogged, the water doesn’t flow well, it stands still, and dirt ends up in the bathtub. Taking water procedures becomes very unpleasant.

Among the most common causes of blockages, there are several.

Dead skin cells and hair stick to the walls. If dirt is not removed, over time it will accumulate and clog the drain hole.

The bathtub becomes dirty due to regular water procedures and frequent washing. Traces of soap remain on the walls, which accumulate over time, although the water itself ends up in the sewer.
Long absence necessary care may lead to limescale. You may not notice the appearance of such a blockage for a long time until the situation becomes too serious. Dirty pipes must be cleaned monthly, otherwise they may become unusable over time.
If your drain is frequently clogged, it is possible that it was not installed correctly. Contaminants can quickly accumulate if the slope is very low.

When installing the pipeline, you need to ensure that there are not too many bends. Sand, grease, hair and other contaminants can accumulate in them.
You should not choose a pipe that is too narrow. Dirt accumulates in such elements much faster.

Having figured out what exactly caused the pollution, you can decide what is the best way to eliminate it. If you think that you cannot deal with the problem on your own, you can seek help from a specialist. However, many people prefer to do the cleaning themselves, saving their budget. There is nothing complicated in such work. You just need to understand some of the nuances to choose the best product.

Remedies

A clogged pipe can be cleaned mechanically, chemically or folk method. To increase cleaning efficiency, many people prefer to combine these methods. Let's look at the main features of each method.

Mechanical

Among the most common mechanical methods When cleaning sewer pipes in the bathroom, you can use a cable, a plunger or a vacuum cleaner. If everything is done correctly, it is quite easy to “break through” the blockage.

plunger

Many people prefer to use a plunger to get rid of blockages, so this simple device is available in many apartments. It is a flexible rubber product with a long straight handle. The rubber element is used as a suction cup. The plunger works well for cleaning a wide variety of drains.

When planning to remove dirt that is clogged in the drain hole, you need to consider several points.

When using a plunger, you should not use additional chemicals. Chemicals may end up on skin or clothing and cause burns.
Before using such a device, wet its base with water.

You need to place the plunger over the drain hole. Make sure it is completely covered by the rubber cup. Position the handle vertically. In order for the plunger to stick well, you need to press on it.

Move the device, then remove it and evaluate the result. If the bathtub is very clogged, perform the procedure again. If you succeed in cleaning the drain and removing the blockage, you should rinse the device with hot water to remove any remaining dirt.

Cable

The pipe can be cleaned effectively using a plumber's rope. You can use this device if a plunger does not help. You can create a plumbing cable with your own hands. To do this, straighten the wire hanger and bend it at the end, making a small hook. Using this device, you can easily remove stuck hair.

The cable should be used in accordance with the recommendations of professionals.

Carefully insert the tool into the drain hole. In this case, it needs to be rotated.
When the cable is at the maximum possible depth, turn it several times and remove it.
There will be hair and other debris at the end of the cable. Carry out the procedure until you can completely get rid of the dirt. Then you will need to turn on the hot water.

Vacuum cleaner

Some people use a vacuum cleaner for cleaning. This device is very convenient to use.

To remove blockages, a vacuum cleaner is used in a certain way.

Take the rubber attachment from the plunger and attach it with electrical tape to the vacuum cleaner pipe. Then the product can be cleaned of glue using alcohol.
Remove the trash bag from the vacuum cleaner and connect the hose and pipe to the blowout hole.
Turn on the vacuum cleaner and start cleaning the drain.

Chemical

When using chemicals, you must wear rubber gloves to protect the skin of your hands. You should also protect your face with special glasses and a respirator.

Several products work well for cleaning pipes.

Domestos. This product can be called one of the most popular, because cleaning with its help is very quick and convenient. In the evening, pour it into the pipes (10 caps will be enough) and wait until the morning. You should not use the bathroom at night, so warn all family members about the procedure in advance. When cleaning is complete, rinse the pipes with water (it should be hot).

"Mole". This product is very effective at dissolving hair and other impurities. The entire procedure will take about an hour and a half. Pour the liquid, wait (exactly how long is usually written in the instructions). Then open the tap and flush the drain hole with hot water.
Tiret. Enough effective remedy, but usually one package is only enough for two procedures. Fill with Tiret and wait a few minutes (if the contamination is heavy, you can wait about half an hour). Then rinse off the product with water. Tiret should not be used together with acids, otherwise the respiratory tract may be seriously damaged.

Mr Muscle. This product is suitable for a wide variety of pipes. It is granular, but can also damage skin therefore it is necessary to use rubber gloves. Add the product and wait about 30 minutes. Mr Muscle will remove not only dirt, but also harmful microorganisms. The product also effectively eliminates unpleasant odors. After using Mr Muscle, you need to fill the drain with hot water.
Sky. This tool can be called universal. It dissolves hair, removes soap marks, and destroys harmful microorganisms. The product is sold in a bag.

Pour the substance into the drain and wait about 15 minutes. Then wash it off clean water. Sky should be removed with the utmost care.

Chemicals are quite effective. However, if you suffer from asthma, for example, it is better to prefer some other methods of cleaning the drain. One option is to use folk remedies.

Folk

Using folk remedies, you can clean the drain quite effectively. You just need to know how to use them correctly. Let's look at the most popular options.

Soda

Baking soda can be used different ways. However, in any case, it should be taken into account that when using such a product there should be no water in the bathroom.

You need to use soda like this:

Wear safety glasses and rubber gloves. Using caustic soda can cause chemical burns. Pour about 2 liters of water into the bucket. Pour caustic soda into it (3 cups is enough for cleaning). Take an old wooden spoon and mix the product thoroughly. When hissing sounds occur, pour the resulting liquid into the drain hole. Then you need to wait about half an hour and rinse the drain with hot water. If it does not clear the first time, you can repeat the procedure.

The following method also allows you to achieve good results. Need to mix baking soda(take half a glass) and table salt(half a glass will also be enough). Wait about 20 minutes and add boiling liquid. As a result chemical reaction you will get a product that will effectively dissolve dirt.

Vinegar and soda are gentle products that do not damage plastic pipes. Pour boiling water into the drain hole. Pour baking soda into a glass (halfway) and push it down the drain. Wait a few minutes, then pour a cup of boiling water and the same amount of vinegar. When the hissing sounds occur, the cleaning process will begin.

When about 20 minutes have passed, you will need to pour a kettle of hot water into the drain. This way you will wash away the dirt weakened by this product.

Boiling water

There are no restrictions on the use of such a product; the drain can be cleaned daily using boiling water. However, it will not help if the pollution is very strong. Water must be poured into the drain hole several times. The hot liquid acts for a few seconds.

Dishwashing liquid

With the help of such products you can remove fat quite effectively.

They should be used as follows:

pour boiling water into the hole;
add a quarter cup of dishwashing liquid;
after 20 minutes, refill the liquid (it should also be boiling);
wait 30 minutes and turn on hot water to thoroughly flush the drain.

A plunger can be used together with this product. This cleaning will be more effective.

Sulfuric acid

Some people use this remedy if the pollution is very strong. However, it should be borne in mind that the acid is quite aggressive. Plumbers say this product is not always effective and can destroy sewer pipes.

If there is a blockage in the bathroom, then how to remove it depends on the intensity of contamination of communications and the cause of the blockage. Rags can get into the water supply, and grease can also accumulate in the pipes, hair and other contaminants can settle. As a result, the clearance of communications decreases. They are cleaned periodically when water begins to accumulate in the bathtub.

The cause of the blockage is a dirt plug.

Causes of blockages

There are several main factors:

installation errors;
lack of care;
failure to comply preventive measures to prevent blockages;
careless operation.

A clogged pipe in the bathroom most often occurs due to lack of maintenance.

they are mounted with a slope relative to the horizontal, which facilitates the outflow of water;
you should not use the number of bends (turns at right angles) when drawing up a project;
it is necessary to correctly determine the sufficient diameter of communications.

When there is no slope or it is not large enough, more than 2 bends are provided in a short section or the cross-section of the pipes is minimal, in each of these cases the speed of fluid movement through the communications is reduced.

From time to time it is necessary to use chemical or mechanical means. This will prevent blockages from forming in the future.

In addition, during operation, the simple rules hygiene: hair is not removed from the drain after taking a bath, plumbing fixtures are not cleaned of grease deposits, and contaminants that have entered are not removed in a timely manner.

This leads to the fact that the drain hole is first clogged, then the dirt passes further through the sewer. There, when connected to fatty deposits, a plug is formed, which narrows the lumen inside the pipeline.

Without the proper slope, the pipe will quickly clog.

Mechanical methods

If your bathtub is clogged, you can try cleaning it at home without using special equipment. The most common method is to use a plunger. It is used only in cases where the contamination is simple, for example, if the drain hole or section of the pipe that is connected to the plumbing fixture is clogged. In this case, it is easy to remove the plug or debris by making reciprocating movements (up and down) with the handle of the plunger.

Water accumulated on the surface of the bathtub will immediately leave as soon as the dirt is removed. If the blockage is severe, a plunger will not help in this case. This is due to the fact that the plug has formed further from the drain hole. However, it can be destroyed without a plunger using a special tool. When you don’t have one at hand, and the water is standing in the bathtub and won’t go away, they try to use improvised means – a vacuum cleaner. More effective method– hydrodynamic.

Plumbing cable

Such a device helps to remove contamination or push through the plug, destroying it if the narrowing of the communication lumen occurs no further than 3.5 m from the drain hole. This length is typical for a standard household cable. It is inserted into the pipeline; for convenience, a handle is provided on one side.

When the hard wire hits the blockage, you need to make a sharp rotational movement, try to push the plug forward or backward. At the end of the device there is a spiral, with which dirt can be pulled out through the drain hole.

Using a vacuum cleaner

This method is suitable if the clog is small and located close to the drain. To do this, use a vacuum cleaner and a blowing function.

Use a vacuum cleaner to clear the clog.

Instructions for performing the work:

disconnect the dust collector;
prepare a rag with which you will need to wrap the vacuum cleaner hose - use it to close the inlet;
the hose is installed at the entry point of the drainage from the bathtub;
turn on the vacuum cleaner in blowing mode.

Using household appliances to remove the blockage, the risk of its breakage increases.

Hydrodynamic method

In this case, you can get rid of the blockage using a directed stream of hot water. (temperature reaches +120°C), which is supplied under pressure. This option allows you to dissolve the fat plug. Even if the cause of the blockage is not grease, but dirt, then supplying liquid under pressure will help push through the accumulation of debris.

To implement this method, you will need a manual hydrodynamic device.

When choosing, take into account the power: it depends on the cross-section of communications.

Preparatory work:

a hose is connected to the unit;
it is necessary to screw the nozzle;
insert the hose into the drain.

All that remains is to turn on the device, and after a few minutes turn it off. In this case, there is no need to apply physical effort to remove the blockage. The unit destroys the plug formed from fat. At the same time, it removes plaque on the walls.

Traditional methods for removing clogs

Non-aggressive substances can cope with organic contaminants.

Effective methods:

Vinegar and soda. When these components combine, a chemical reaction begins. The result is a substance that can remove complex organic pollution. To do this, prepare 1 glass of soda and the same amount of vinegar. First, pour soda into the drain. Next, the essence is poured into it. After 15-20 minutes you can flush the pipe running water a lot.
Fresh lemon juice. Squeeze the juice from 1 lemon directly into the hole. After 10-15 minutes, you need to open the tap to flush the communications.

Chemicals and preparations

Most often used:

Mole;
Mr. Muscle.

These are aggressive drugs that can deal with any organic blockage. When using cleaning products, you do not need to prepare tools or exert physical effort. The chemical corrodes on its own body fat and other contaminants.

The drugs can be used rarely and only in case of complex traffic jams. If you use them regularly, the structure of the polymer material will be disrupted.

How to clean a siphon

The siphon must be cleaned periodically.

The flask needs to be dismantled; its lower part can be easily unscrewed. First, place a container under the siphon so that the water contained inside does not spill onto the floor.

Must be cleaned of plaque and dirt inner surface flasks. To do this, use a soft rag. It is not recommended to reuse it.

You can treat the siphon with a disinfectant solution. After this, the lower part of the flask is put in place. To remove the siphon completely, you need to unscrew the plastic nuts on the top and sides of it.

How to eliminate odor from a drain

Main reason - malfunction of the siphon, resulting in a decrease in the liquid level in the water seal. In addition, organic contaminants can rot inside communications; bacteria actively multiply in such an environment. As a result, an unpleasant odor appears. The drain in the bathroom needs to be cleaned. Use mechanical means to remove large debris.

However, only chemical substances can dissolve organic contaminants and deposits on pipe walls. When dismantling communications, you need to remember that there may be water inside, so dismantling is carried out above the container.

How to clean an old faucet

The reason for the decrease in pressure is sometimes that rust and lime deposits form inside the faucet. As a result, the quality of water deteriorates, and at the same time the speed of its supply decreases.

Cleaning the aerator

This element is easily removed: it is unscrewed, sometimes it is necessary adjustable wrench. The aerator must be rinsed under strong water pressure. The use of chemicals is not recommended, as it may damage protective covering metal If there are complex contaminants on the mesh, they are removed with a needle. After this, this element is installed in place.

Cleaning a single lever mixer

To get to the fasteners, remove the plug (red or blue, determined by the water temperature). Then unscrew the screw under it. After this, remove the handle and at the same time dismantle the housing, under which the working mechanism is located. Using open-end wrench, remove the clamping nut. If, when dismantling the mixer, damage to the parts can be detected, in this case it is better to replace the mechanism.

Preventing blockages in the bathtub

You need to install a special mesh on the drain hole. It will trap large and small contaminants. This will reduce the risk of blockages. Clean the pipeline regularly with hot water. This will allow timely removal of fatty deposits on the internal walls of communications. If you often have to remove plugs in the sewer, it is recommended to clean the plaque with preparations once every 2-3 months.

You can use a plunger as a preventative measure. It pushes through small dirt well. It is not advisable to use a vacuum cleaner for prevention, since it is not always possible to fix the household appliance after that. To use mechanical or chemical means correctly, you can first watch a video of how specialists do it.

5 minutes to read. Published 09/11/2018

A clogged drain is a very unpleasant phenomenon when water does not go down the drain, and there is a disgusting smell in the bathroom.

There are many ways to correct the situation, although some housewives do not even know how to clear a clog in the bathroom using folk remedies.

Usually, blockages are caused by improper use of the drain. Most often, pipes become clogged due to hair, animal fur, small debris and pellets from clothes. It all turns into one big lump, making it impossible for water to pass through the pipe.

plunger

This simple thing which is widely used to clear sewer blockages
And .

It is believed that this method can be used as a preventive measure. The more often the housewife uses the plunger, the less often a blockage will occur in the bathroom.

Instructions:

The plunger must be installed so that the rubber nozzle completely covers the drain hole.

Before cleaning, it is worth filling the bathroom a little with water.

The plunger handle must be lifted up several times and then lowered down. Thanks to this, air will rush into the drain hole and push through the resulting blockage. To wash it off, you just need to turn on the water.

Household chemicals

In fact, you can unclog a bathroom clog without a plunger. After all, you can simply purchase modern cleaning products.

If previously only soda was used for this, today it is enough to visit the department household chemicals and choose the packaging you like.

It is best to choose a product whose instructions indicate that it dissolves hair and fur.

You can choose not only a special cleaning powder, but also a liquid product.

It is necessary to clarify in the instructions that the selected product is really suitable for a specific type of sewer pipe.

The product must be carefully poured or poured into the drain hole. If it is a special powder, you should also add a glass of warm water.

To be sure to remove the clog, you need to avoid using the bathtub for a while.

After a certain period of time specified in the instructions, it is necessary to turn on the hot water in order to thoroughly rinse the sewer pipes and remove debris.

Folk remedies

In the old days, every self-respecting housewife knew exactly how to clear a clog in the bathroom with soda and vinegar. Today, women rarely resort to using folk remedies. However, at home, blockages can be easily removed in two ways:

Pour half a pack of soda into the bathroom drain where there is no water. After 5 minutes, turn on the hot water.

You need to pour 4 tablespoons of soda into the drain and pour half a glass of vinegar there.

Then the hole needs to be covered with something so as not to interfere with the chemical reaction. After some time, you can turn on the hot water. The easiest way to get rid of residual debris is with strong pressure.

Such methods are quite effective, but they can negatively affect the condition of the pipes.

Cable

Plumbing cable is a thick twisted wire, rolled into a small spiral. For convenient rotation, there is a handle with a wooden or plastic attachment at the end.

This device is actively used to remove sewer blockages. Moreover we're talking about mainly about metal pipes.

Application:

The end of the cable must be carefully inserted into the drain hole.

It is best to do the work together. So, one person slowly rotates the handle, and the other carefully pushes the cable forward.

When the cable is twisted, accumulated debris is removed from the pipes, that is, the blockage is destroyed.

As soon as the tension in the pipes decreases, you need to pull the cable back and forth several times.

The cable is carefully removed, washed and stored.

If the procedure is ineffective, it is repeated.

Before removing the blockage, you need to pay attention to the tension of the cable. Lack of tension can damage the cable.

Siphon cleaning

Male owners don’t think long about how to clear a clog in the bathroom. As a rule, they immediately begin cleaning the siphon. This procedure allows you to get rid of debris accumulated in pipes and unpleasant odors in the room.

Cleaning procedure:

On the floor directly under the siphon you need to lay a rag that absorbs moisture well.

Place a basin on top of the fabric. This simple measure will prevent dirty water from getting on the floor.

The bolt nut must be unscrewed very carefully. After this, you need to remove the flask.

Immediately after this, the water that formed the water seal will flow into the basin.

The siphon itself should be thoroughly rinsed with water and all plaque removed from the walls.

The entire structure must be installed so that the drain pipe does not rest on the flask. This is very important, otherwise the water seal will be damaged. To check the tightness of all connections, you need to open the tap and fill the water seal.

Such cleaning can also act as a preventive measure. For this purpose, the siphon is cleaned every 2-3 months.

How to avoid blockages

Of course, any blockage can be cleared using one of the above methods. However, it is much easier to worry about prevention in time.

It is necessary to install small mesh in the drain hole to trap debris.

From time to time, you need to pour pipe cleaning products into the drain.

A plunger should be used periodically.

Thanks to the observance of all preventive measures, you will no longer have to puzzle over how to clear the blockage in the bathroom with a cable or a plunger. Moreover, the bath will always be clean, and the air in the room will always be fresh.