The catalog of our online store contains more than 170 accessories for landscape design. The cost of curbs and fences depends on the materials and design.
Benefits of accessories
- . Curbs. Made from high quality plastic or polypropylene. Fixed to the ground with plastic nails. The standard length of the packaged product is 3 m. They are installed on the border of a bed, flower bed or lawn. Resistant to weather conditions. Fan structures are used to create multi-tiered flower beds.
- . Border tapes. They help create shaped flower beds. Used in the design of lawn edges and separation of bulk materials.
- . Decorative fences. They are constructors that are connected using special latches, which allows you to make a fence of any shape. Fixed to the ground with mounting feet. Length - 3 m. Some options are suitable for creating sandboxes.
- . Decorative gravel. Used in decoration alpine slides, flower beds, creating paths and compositions. For these purposes, you can choose multi-colored pebbles, white or gray marble chips, decorative rock different colors.
Also in the catalog select weather vanes, bridges, garden figures, artificial grass and other products for decorating a personal plot.
Payment and delivery methods:
- Buy goods online with delivery
- . You can pay for your order in cash or by bank transfer.
- . You will agree on the date and time of delivery with the operator by phone when confirming the order.
- . The conditions for the free provision of the service depend on the city, amount and weight of the product.
- . Unloading of goods, lifting and carrying are considered additional services and may be paid separately, check with the store operator.
Detailed information about intervals and zones by city, conditions for unloading and picking up orders is available on, where you can independently calculate the cost of your delivery in advance, indicating the postal address and parameters for unloading.
2. Order and pick up where you want
- . When filling out the order form, indicate the date and time convenient for you to visit the hypermarket.
- . You can pay for your purchase in cash or by bank transfer at the store's cash desks.
Purchased goods can be picked up independently at any of the OBI stores in Moscow, St. Petersburg, Ryazan, Volgograd, Nizhny Novgorod, Saratov, Kazan, Yekaterinburg, Omsk, Krasnodar, Surgut, Bryansk, Tula and Volzhsky.
Durable and beautiful fence Decorative allows you to visually highlight a site and focus attention on a specific area of landscape design. Depending on the purpose and type, such a fence can be functional, zoning, or protecting flower beds from trampling.
Types of decorative fencing
A decorative garden fence can perform various functions:
- prevent unauthorized persons from entering the site, protect the territory from wind, street dust and noise;
- delimit adjacent areas without obscuring sunlight;
- zone the garden and local area;
- protect flower beds from trampling and domestic animals, prevent their growth.
Options for decorative fences for suburban area many, they all differ not only in purpose, but also in appearance. Therefore, it is customary to classify fences according to the materials used for their installation:
- stone fences;
- brick fences;
- wooden and hedges;
- plastic fences;
- metal fences.
When choosing the material and type of decorative fence, you need to take into account the characteristics of the soil, the type of planting and climatic conditions.
Stone fence
Stone fences They are able to decorate any area; they look solid and reliable, emphasizing the surrounding landscape design. Stone fencing has the following features:
- suitable for any area, flower garden, garden paths;
- can be used for landscape design in oriental style, for building retaining walls, alpine slides;
- a permanent fence, resistant to external negative influences, climatic phenomena, including frost and precipitation;
- stone can be used for making various types, shapes and colors;
- goes well with other materials.
For installation, you can use natural stone of various types - colored large pebbles, torn or cut stone, polished blocks.
Brick fence
Decorative brick fencing is also very popular for garden areas. This is a stylish and very attractive material with excellent performance characteristics. It is durable, can withstand frost and precipitation, and does not require special care.
To install fences, you can use ordinary ceramic or sand-lime brick, clinker, hyperpressed blocks. In addition to the standard brown-red or white shades, for decorative fences you can use colored bricks - yellow, green, black.
Eurofences
Concrete Eurofences have a stylish and attractive appearance; they can imitate natural wood or stone, during the manufacture of the section, colored pigments can be added to the solution. Structurally it is monolithic slabs, which are fastened using special posts with grooves. Sections can be solid or have beautiful openwork inserts; it is possible to install lighting systems on the posts.
To install a Eurofence you need a device strip foundation, the supports are concreted to ensure greater reliability of the structure. During installation, sections of the fence are neatly inserted into the grooves, that is, there is no need to use metal embedded parts or perform a number of other complex work.
Wooden fences
A decorative wooden fence can be easily assembled with your own hands; this is the simplest and, at the same time, attractive option for any suburban area. For installation you can use various options wooden fencing:
- a low herringbone fence made of boards or slats;
- an ordinary board fence made of solid sections;
- a fence in the form of a plank palisade;
- wicker willow fences and “living” walls of various heights.
One of the simplest is a lumber fence or a simple picket fence. The second option is divided into through and non-through picket fences, in the form of one row of planks or two rows, while the boards are placed in a checkerboard pattern, protecting the area from being viewed. For small flower beds, you can use low wicker fences; for planting standard roses, lattice fences are optimal.
Metal fences
One of the popular options for a suburban area are metal fences in the form of forged sections, bars or nets for climbing plants. Metal fences have the following advantages:
- high level strength and reliability;
- resistance to external negative influences, mechanical loads;
- the possibility of installing fences around the perimeter of the site or for zoning the garden;
- combination with other elements of landscape design;
- opportunity to use others decorative materials– wooden and stained glass inserts, climbing plants.
Metal fences are very beautiful and have a certain style, but they require protection against corrosion, for which special paint and varnish coatings are used.
Plastic fencing
Decorative plastic picket fence is well suited for any garden; these are not only classic type fences, but also such original options, like borders made of plastic colored bottles, ribbons or cords, small plant pots. Among the advantages of using this option are:
- decorative, more attractive appearance;
- low price;
- easy DIY installation;
- practicality and unpretentious care;
- versatility.
To fence the area, you can use a classic picket fence of medium height, imitating natural board. The most commonly used designs white, but if necessary, you can order colored fences - brown, green, yellow and others.
For flower beds and flower beds, you can use low fences that will not obscure the plantings, but will still ensure the safety of the plants. For this purpose, strip fences and plastic logs, which are dug shallowly into the ground, are suitable. Ordinary fencing can also be used as decorative fencing. plastic bottles, digging them into the ground upside down. To give this design more strength and attractiveness, the bottles can be filled with small colored pebbles or glass beads.
A very attractive option would be to use plastic flower pots planted along the perimeter of garden paths. For such structures, low-growing flowering plants, they need to be kept warm for the winter.
Stained glass fence
Stained glass fencing is an original and very attractive option that can be used for installation around the perimeter or for zoning a site, garden or local area. Structurally, it is a regular metal or forged fence with inserts made of colored glass or acrylic. In addition, inserts can be made from translucent resins, giving the structure an incredibly attractive and fabulous appearance.
The cost of a stained glass fence is quite high, so it is usually combined with ordinary metal lattice or forged sections. Stained glass inserts in this case give an original appearance; when passing through them, the sun's eyes acquire bright, unusual shades.
Combined designs
Combined fences are made as a combination various materials. Most often this is a combination brick pillars and wooden lattice, but can also be used forged elements, a natural stone various types and shades, elements of “living” walls made of climbing plants. This type of fencing is used to delimit adjacent areas or for zoning the local area. The height of the fence is usually medium or small.
Living decor
A living fence made of trees will become a real decoration for any site. Depending on the landscape design and purpose of the area, the following types of fences can be used:
- high (from two meters);
- medium height (0.5-2 meters, can be combined);
- low borders (up to 50 cm (special shrubs are used).
When choosing a “living” hedge, you should take into account the conditions and requirements for caring for plants, watering them, and fertilizing them. Some plantings require regular crown molding to maintain an attractive appearance and prevent overgrowth.
The following types of hedges can be used for landscape design:
- deciduous and evergreen plants (shrubs and trees of various heights, the choice depends on the climate and planting conditions);
- thornless and thorny hedges (mostly shrubs).
For high hedges, large-leaved and small-leaved trees with wide-conical crowns are used. The planting height can reach 20 meters, the crowns are very dense and shade-tolerant, but careful care and pruning are necessary to ensure that the hedge retains its attractive appearance. Such bosquets, that is, living walls, are used for large areas, fences of cottage villages, the planting height is most often at a level of 3 meters.
Among the most commonly used trees for high hedges are linden, common hornbeam (distinguished by a very dense crown), field maple, rough elm, black and white mulberry. For high thorny hedges use different breeds hawthorn (soft, common, Altai), honey locust.
A DIY decorative fence will help you decorate personal plot, will give flower beds and flower beds a complete original look. Fences for flower beds can not only transform the landscape of the garden, but also perform other useful functions:
Depending on the purpose of the fence, the type of plants, as well as general design garden, select the height and design of the fence:
The range of ready-made garden fencing is very large. However, if you show a little imagination, a decorative fence made by yourself can please you even more than the most beautiful ones modern products. There are practically no restrictions on the options for making fences for flower beds. Let's consider the most simple options from traditional and not so traditional materials.
Tree - classic version, the most accessible and in demand. Plus it's one hundred percent environmentally friendly material, which will not harm plants and the earth. On the contrary, slowly decomposing wood will nourish the soil and plants.
Decorative fence for a flower bed made of sawn logs
To decorate flower beds and flower beds, you can use boards, timber, small stumps, stakes, twigs, bars, saw cuts, etc.
Types of wooden fences
Important! The wood must be treated with an antiseptic, especially the parts in contact with the ground, so the decorative fence will last longer.
Wicker fences
Wicker flower beds and fences for the garden fit organically into country style, and the plants in such flower beds look especially cute. The work itself will bring a lot of pleasure.
To work you will need any flexible branches:
- hazel;
- willows;
- grape vines;
- raspberries;
- cherries.
An example of a wicker fence for a summer house
It is best to prepare material for wicker flower beds in early spring, at this time the rods have good flexibility and are better cleared of bark. If the branches are not flexible enough, they are soaked in hot water.
Wicker fence installation
Tip: when weaving, you can take branches one at a time or several at a time. Very thin branches are often woven into bunches to create a beautiful checkerboard pattern.
Wicker fences for flowers can be made in the form of a border, a fairly high fence, or in the shape of a basket. You can make a raised flower bed out of wattle fence. To do this, the sides of the flowerbed need to be protected plastic film, lay drainage in the form of crushed stone and sand at the bottom and fill with soil.
Brick fence
Brick as borders for flower beds in the garden is one of the popular options. can be very different. There are many advantages to such a fence:
- Attractiveness. Unless, of course, it’s not an old crumbling brick, but, for example, a solid colored version;
- A brick border looks organic with brick walls houses and plants;
- Strength. The brick curb is durable even without the use of cement;
- A brick dug into the ground protects flower beds well from weeds.
DIY brick flowerbed border
Decorative fences made of natural stone
– this is beauty, harmony and durability. From natural material you can create beautiful flower beds and flower beds. Mineral for garden fence You can use any: pebbles, granite, sandstone, dolomite, marble. You can make the following types of decorative fencing with your own hands from stone:
Pergons and gabions
Natural stone in a welded mesh allows you to create flower beds and fences for a garden of any height. Multi-tiered or tall ones look great in combination with the natural landscape.
Installing such a fence is also not difficult. You need to assemble a box from welded mesh and fill it with any stone, the main thing is that the size of the backfill matches the grid cells.
Can be used on any basis. Rack rods with a diameter of about 8 mm are used as the base. 
The grating can be made from galvanized steel rods with a cross-section of 5 mm. In addition to stone, other materials may be present in the structure: tree cuts, glass, brick, concrete. After installing the flowerbed, its walls are lined with geotextiles, and soil is poured into which flowers can be planted.
One of important elements country house is a fence. It defines the boundaries of the site and serves as protection from prying eyes. Increasingly, the fence is carried out and decorative function. In this article we will look at how to make a decorative fence with your own hands, without turning to specialists for help.
Fencing materials
Decorative garden fencing can be made from many building materials.
Wooden fences deserve special mention:
- The installation process is simple
- The prices for the material are quite reasonable.
- This fence can be painted in any color that seems appropriate.
Stone fences are no less popular. This type of fence does not require any special maintenance after installation.
Note! A fence should not only be aesthetically pleasing, its main quality is strength and durability!
There are options for making decorative fences from plastic, concrete, brick, bottles and more. Below we will take a closer look at each of the existing ones.
Plastic fence
Typically, plastic fencing can be purchased at finished form at the market or in a specialty store. This material has positive technical characteristics, especially thermoplasticity should be highlighted. Plastic fences can be used to fence flower beds, sidewalks, and front gardens. Manufacturers plastic fences use the most different colors and shades
Here are just some of the features and positive characteristics of plastic fencing:
- There are strip and sectional fences. They are ideal for marking the boundaries of a garden path. In addition, they will be a wonderful addition to a flower arrangement.
- Each section has pegs. Thanks to this, their installation is not difficult. Using light pressure on the fence, the pegs need to be driven completely into the ground. Installation is possible both on a flat and inclined surface.
- Thanks to modern developments, such a fence can imitate wattle fence, wooden picket fence, masonry And so on. Typically the section height is 130–200 mm.
Decorative wooden fence
Wood is the most common material used to make decorative fences for flowers and more. The tree does not create disharmony in the garden; it looks at ease. The main advantage is the availability of the material. For the manufacture of decorative hedge You can use different lumber: branches, logs, slats and boards. However, regardless of the type of wood used, it should be carefully treated at the beginning. This is especially true for the part that will be immersed in the ground. For example, this part can be treated with liquid bitumen. The other part of the structure must be impregnated with a special solution, which will prevent rapid rotting and repel insects. Let's look at the features of manufacturing three types of wooden fences:
- Boardwalk.
- Lattice.
Manufacturing of plank fencing. Let's look at an example of making a board fencing with your own hands measuring 700x700 mm. To do this you need to prepare:
- four bars 5×5×70 cm,
- eight boards 2×10×70 cm,
- 40 wood screws or nails,
- hammer or screwdriver,
- level.
The work process looks like this:
- Supports are driven into the ground at a distance of 70 cm from each other. Using a level, the vertical is checked, and the height is also adjusted.
- Then the board is attached to the top of the block so that its edges do not protrude beyond the edge of the block.
- The second crossbar is installed at a distance of 10 cm from the bottom edge of the board.
- The entire board fence is installed in this sequence.
Manufacturing of decorative lattice type fencing. This fence is suitable for a small flower bed. It can also be used to fence a recreation area. One section in our case will be 90×63 cm. For manufacturing you need:
- two bars for support 3×3×95 cm,
- two bars for the crossbar 2×3×90 cm,
- twelve slats measuring 1x2x52 cm,
- four self-tapping screws 3×40 mm and 3×25 mm – 12 pieces.
The whole DIY manufacturing procedure boils down to the following:
- The process of assembling sections is carried out on a flat surface. It is necessary to retreat 3 cm from the top, and then secure the bars with self-tapping screws.
- Step back 50 cm from the place where the upper crossbar is attached, then install the lower beam according to the same principle.
- The slats must be secured from left to right with a 3x25 mm self-tapping screw. Having retreated 15 cm from the support, the first rail is fixed at the upper point of attachment of the crossbar and support. The slats are installed in 15 cm increments.
- Each rail is installed in a similar manner from right to left. This creates a diamond-shaped pattern.
To fence your plot or flower bed, you should make the appropriate number of sections.
Note! If you decide to make a decorative fence rectangular or square shape, then the consumption building material will increase several times.
When the fence is installed, it should be painted or coated with a protective varnish, which will protect the structure from rotting. If desired, the fence can be painted in several colors, which will make the area more cheerful.
Decorative wattle fence. As for this option, it is done quite quickly. To do this, you will need to get willow, birch or apple branches. It is best to cut them in the fall or spring. The thickness of each branch should be no more than 20 mm. The consumption and volume of branches required will entirely depend on the size of the decorative fence. In addition to the branches, you will need to prepare the following material:
- wire,
- wood screws,
- bars.
Note! Some modernize this idea and use wires or multi-colored hoses instead of willow branches!
So, all the work proceeds in the following sequence:
- Vertical supports are installed in half-meter increments.
- As a rule, you should weave starting from the first row. Using screws or wire, a vine is attached to the bottom of the support. Then it is stretched horizontally, bending around each subsequent beam/support. So that after a while, when the branches dry out, the structure does not fall apart, it is recommended to fasten each end with wire.
In principle, this is the entire technology for making a decorative fence with your own hands using the weaving method. There are other interesting methods of making fences, more on that later.
Decorative stone fence
In this option, you can use the most cobblestones different forms. The result may be a fence in the style of the Middle Ages. With delicate flowers rough texture creates great contrast. Such a fence will last for centuries, and this is without exaggeration. The work plan for making such a fence is quite simple:
- The first row of stones is best buried and laid on cement. It is preferable to use flat stones.
- The stones are selected to be approximately the same height. This will allow you to construct subsequent rows without less problems.
- To make the structure durable, each stone is connected with a cement composition.
Note! During the laying process, the seams should not coincide; it is necessary to lay the stones staggered.
Metal fence
Every metal fence has one main advantage, which is durability. However, metal fences will require additional annual painting, otherwise their appearance will not be pleasing. A metal fence can be purchased ready-made and assembled according to plan. You can think over the layout yourself and, accordingly, make a metal fence yourself. Let's consider brief instructions for the production of a metal section measuring 90×55 cm. To do this, you need to prepare:
- two fittings Ø1.2 cm 95 cm long for support,
- two fittings Ø1.2 cm 90 cm long for crossbars,
- five rods Ø1 cm 39 cm long for a horizontal crossbar,
- decorative elements: six rods Ø1 cm, length 14.5 cm,
- welding machine.
Work on the manufacture of a metal decorative fence looks like this:
- From the top you retreat 5 cm from the support, after which you weld the cross member.
- Next, measure 40 cm from it and mount the lower part of the frame at this distance.
- Fix the horizontal bars in 15 cm increments.
- Weld the decorative elements in a checkerboard pattern.
- Installation of the fence is carried out by pressing the supports into the ground.
Note! The distance from the bottom of the frame to the ground must be at least 10 cm.
Of course, the work on making this type of decorative fence will take you much more time. But such a fence will last much longer.
Decorative concrete fences
You can often find a massive gray concrete fence that can hardly be called decorative. However, thanks to innovative technologies, a concrete fence can be of a variety of colors and shades, and there may be a pattern on the front part. You can make such a design with your own hands; you just need to purchase or make special molds. The work process is quite simple. Concrete is poured into the matrix for a day. After drying, the section is removed and installed. Everything is simple and consistent. Follow these tips:
- Each matrix must be lubricated with vegetable oil before pouring concrete.
- Recommended brand of cement is M250.
- To prevent the product from turning out dark, there should be less sand in the total mass, and vice versa.
- Before painting the finished product, it is recommended to treat the surface with a deep penetration primer.
Decorative brick fence
The most popular material for arranging flower beds, lawns, and lawns is brick. He has exclusively positive properties. In most cases, it is laid in a diamond shape, resulting in a jagged fence. But this is not the only installation method. You can lay out fences in the shape of an oval or circle.
The second row is laid so that the seams do not match. Each brick level is fixed cement mortar so that the structure is durable. This way you can create a beautiful decorative fence with your own hands.
Concrete
Actually in casting concrete fence and installing it yourself is not difficult. It is only at first glance that it seems that only a professional can handle this. But in fact, all you need is some tools and skillful hands.
Concrete fences due to development modern technologies no longer look like a gloomy decoration of the perimeter of some government building. It is because of this that they for a long time not recognized as a decorative element. However, today there are many ways to liven up a boring grey colour material, give it a certain texture. To do this, you can use special molds for casting or decorative panels. In general, it is not necessary to decorate both sides of the fence with voluminous details. If you are completely satisfied with one, the outer side, use the molds and paint the inside.
Concrete fence
The presence of a foundation depends on the height of the fence. As a rule, one section has parameters of 2 meters in length and 50 cm in width. Three-panel fences do not need additional reinforcement, but four-panel fences need to be placed on a solid foundation. The top one can be decorated with forged elements or some other pattern, for example, made in the form of a series of small columns.
In order to cast a concrete panel, you will need molds, metal carcass, a vibrating table (for compacting the material), a small concrete mixer and a surface on which the blocks will dry. All this can be purchased in stores garden tools or in specialized warehouses. Concrete is poured into a mold, which is placed on a vibrating table. This way the mixture is better distributed throughout it and possible voids are filled. Then the resulting slab must be removed from the mold and laid out to dry. They are fastened between two columns located at an appropriate distance and having special grooves where the blocks are placed. The columns are buried in the ground, the depth depends on their height and the height of the future fence.
Cladding panels are good option decor of concrete fencing. They will be an excellent alternative to a mold for casting, and in this case there are more options and they are more varied.
From blocks
In addition to concrete, you can make a fence from blocks. They can be an imitation of stone or consist of raw clay. This fence is moisture resistant and very durable. But it’s practically impossible to do without a foundation.
block fence The construction of a fence from blocks is rarely done without the involvement of builders and the use of special equipment. In any case, this includes casting the foundation, installing blocks on top of each other and fastening them together using special solutions. Sometimes metal reinforcement is used to secure the structure. It is most widely used when constructing a fence from blocks with voids. This gives it extra strength and stability.
Between the blocks, as in the construction of a concrete fence, columns are placed, also fixing the sections in place. But the tools are basically the same: a vibrating table (or just a leveler), a surface for drying and a concrete mixer for mixing building material. And the casting process itself is not very different from the concrete version.
Metal
With installation metal fence You can do it without special construction education. Usually, metal supports are required for its installation, cross bars, sheets for the main part and material for securing the supports. Tools should include a screwdriver and, ideally, a welding machine.
metal fence Supports can be secured in several ways. But the first thing you need is to dig holes for them about 50 centimeters deep and 20-30 centimeters in diameter. The supports are installed in these holes and subsequently filled with concrete. If the latter is missing, they can simply be driven into the ground to approximately the same depth.
Once the supports are secured, begin attaching crossbars or joists to them. As a rule, two pieces are enough: one on top, the other on bottom. But if the fence is higher than usual, you can add as many logs as necessary.
Sheets of corrugated sheets are screwed to these joists using a drill and screwdriver. Place the fastening elements at an equal distance, this will distribute the load evenly. That's the whole simple system. You can paint such a fence in any color, and even paint entire pictures on it.
Wood
Manufacturing wooden fence- This is the least labor- and financially-intensive way to fence your territory. To install it, other than a hammer, screwdriver and nails (bolts), you will not need any additional tools. You can also use it as a base concrete pouring, or you can drive demarcation stakes into the ground to a depth of about 50 centimeters.
wooden fence After the markings around the perimeter of the site have been made and the foundations have been driven in, the attachment of the crossbars begins. Their number also depends on the height of the fence, as with the construction of a metal fence. And after that it’s time to adjust the picket fence itself. And here a lot depends on your preferences. Do you want nothing to be seen through the fence? Nail the boards close to each other. If you are absolutely open to your neighbors, you can leave gaps between the pickets of the width you need. The shapes at the ends of the picket fence can be completely different: cone-shaped, with curls and monograms - it all depends on your imagination.
Before installing the fence, pay special attention to the material. It is advisable to give preference to those types of wood that are moisture resistant and generally not affected by weather changes. Larch, for example, is perfect. In addition, decide for yourself whether you can process the wood yourself or whether you would prefer finished material. This will significantly affect the price: untreated wood will be much cheaper.
For flower beds
When installing a decorative fence for flower beds, there is no need to adhere to any building codes. Usually these are low fences, the main requirement for which is to stand firmly on the ground. That is, of course, you will still have to work hard, digging holes to install foundations or fencing right away, but this is the greatest effort that may be required of you.
fence for flower beds 
