How to restore a polished coffee table with your own hands. How to restore a table with your own hands? Decoupage

Many people have old dining or kitchen tables at home; they are usually polished or wooden and are completely damaged. fashionable look. Do you want to throw it away? Not worth it! Why spend money on new table, especially since old tables are much better quality than modern ones and can last for many more years

In this article we will show 4 universal ways to update an old one dinner table with your own hands, without spending much of the family budget!

The main restaurant methods include the following:

Painting the table (usually special paint is used for wooden surfaces, she might be like acrylic base so is enamel)
Replacing the countertop (the tabletop can be ordered ready-made to size, or you can make it yourself, as shown in the master classes below)

They can be used individually or combined depending on the damage and condition of your furniture.

Updating the kitchen table top

Look at your dining table. If its general condition more or less satisfies you with its appearance, but the tabletop is completely worn out or the tabletop simply cannot be removed without damaging the entire structure, this master class is definitely for you.

Materials:

White enamel paint for wood;
Deglosser;
Polyurethane varnish on water based matte (you can use glossy at your discretion);
Boards;
Liquid Nails;
Wood putty;
Fine sandpaper;
Brush, cloth, water.

Restoration instructions

Step 1: Remove old paint

Treat table legs with deglosser.
Thanks to this product, there is no need to sand and peel off the old paint, but simply apply it on top, wait for it to dry and paint it in the desired color.
Apply 3 layers of enamel paint and wait until it dries completely.

Step 2

Turn the table upside down. If you removed the legs for painting, then it will be more convenient for you to paint the bottom of the table top and the side wooden supports.
Apply deglosser and paint in the same way as you would on the legs.

After drying, turn the table back over and paint the tabletop along the edges, taking 10 centimeters at a time; it is not necessary to paint the whole thing.

Step 3: Lay out a new countertop from boards

After complete drying, measure the dimensions of the tabletop, its length and width. The boards should be slightly larger in size, centimeters 5 exceeding the future base e – table top.
Take liquid nails and distribute them evenly in the middle of the table. Then go based on the number of boards you have.
If they even number, for example 6, then they should dock exactly in the middle. In the case of an odd number, you should place the unpaired board in the middle. Again, see what works best based on the size of your particular table and boards.

After gluing the middle, glue the remaining boards on the sides. Leave the table to dry for 12 hours or a day, depending on the glue.

Step 4: Putty

Be sure to fill the gaps between the boards with wood putty, otherwise bits of food will get stuck in them.
You can smooth it out with your finger, and wipe off excess with a damp cloth.

TIP: Let the putty dry for a couple of hours, and then sand all the boards fine sandpaper.

Step 5: Polish

Wipe the boards well, leaving no dust or debris on them. Take the polyurethane varnish, stir it and start applying it to the boards in long strokes. Try to make the first layer thin.
Leave the countertop to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.

Step 6: Whitewash

As soon as the varnish has dried after the last painting, start preparing the paint. IN in this case The whitewash effect is planned; to achieve it, mix 1 part paint with 4 parts water.

Use a brush to paint an area of the board, and then immediately wipe with a cloth. Paint the entire tabletop this way, then add a little more water to the paint and go over it again.

After complete drying, the table is ready for use.

How to update a polished table

If you have a small polished table gathering dust in the corner for a thousand years, which is long overdue for a landfill, but your hand does not rise, then you should pick up magic tools and become a fairy godmother for it.

Materials and tools:

Sander;
Sandpaper;
Stain;
Paint remover gel;
Plastic scraper;
Brush;
Water-based polyurethane varnish;
Dark enamel paint;
Handles for the drawer.

Work order

Step 1: Remove old varnish

Dress in closed clothing and shoes. If the legs are removable, separate them from the tabletop for ease of sanding.
Sand all parts of the table well, getting rid of all dents and scratches.
Small parts, as well as places where the table can be damaged, sand with sandpaper.

Step 2: Apply stain

Apply the stain you like to the prepared parts of the table, following the instructions. Depending on the stain you choose, wait the required drying time.

Step 3: Processing the table shelf

To clean the table shelf, use paint remover gel.
After applying it, wait about 4 minutes (depending on the gel) and carefully clean the shelf with a plastic scraper, being careful not to scrape the wood.
Then apply stain.

Step 4: Lacquer the surface

Wipe all parts of the table well, without leaving dust and debris on them. Take your polyurethane varnish, stir it and start applying it in long strokes.
Try to make the first layer thin. Leave everything to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.
After drying, you can apply a third layer, but no more.

Step 5: Painting the Table

Paint the table the color of your choice, wait for it to dry, and assemble it.
Screw the handles into the table drawer.

Agree that the result of the work done is impressive!

How to paint a wooden table white

One evening, did you realize, looking around, that you were among monochromatic gloomy things? Want to freshen up your room and don't know where to start? White wooden furniture always looks very impressive and expands the space.

You can make a white table from absolutely any color. In this master class we will show you how to paint a black table white.

Prepare the following:

Paint remover;
Degreasing agent;
Plastic scraper;
Fine sandpaper;
Brush;
Polyurethane varnish;
Enamel paint.

Work order:

Step 1: Remove old paint

It is necessary to remove the old layer of varnish from the tables. To do this, we will use a paint remover. To protect yourself from harmful chemicals, wear protective gloves, a mask, and goggles.
Apply the product to areas where paint has been removed. Depending on the instructions, wait the specified time and begin to carefully remove the paint layer, being careful not to scrape the wood.
After removing all the paint, degrease the surface with a special solution.

Step 2: Sand and varnish

Run sandpaper over the entire surface of the tables. Afterwards, wipe them well from dust.
Take polyurethane varnish, stir it and start applying it in long strokes. Try to make the first layer thin.
Leave everything to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.

Step 3: Paint the table

Wait until the varnish is completely dry and begin applying paint. Paint in 3 layers and leave to dry for a day. Afterwards you can arrange tables and please the eye with new clothes.

Wooden dining table in Loft style

Nowadays, wooden tabletops with legs in a contrasting color are very fashionable. Such tables came to us from the Loft style - it is distinguished by its simplicity and a little roughness. But such wooden tables really suit any interior.

Let's watch a master class on how to make a stylish Loft out of an old table.

Tools:

Saw;
Boards;
Polyurethane varnish;
Brush;
Enamel paint;
Liquid Nails;

Installation technology

Step 1: Cut the boards

Measure the dimensions of the tabletop, its length and width. The boards should be slightly larger in size, 5 centimeters larger than the future base - the tabletop

Cover the prepared boards polyurethane varnish. To do this, stir it and start applying it in long strokes. Try to make the first layer thin.
Leave the boards to dry for a day, then carefully sand the surface with sandpaper, wipe off the dust and apply a second coat of varnish.
After the varnish has dried, paint the boards with enamel paint in 2 layers and leave to dry for 12 hours.

Step 2: Installing the countertop

Prepare the old tabletop by pouring some sand on it and wiping it with a cloth.
Once the paint is dry, apply liquid nails to the old countertop and begin gluing the painted boards to it.
To ensure that the boards stick well, place a weight on the tabletop and leave it for a day.

The result is a great little dining table in the Loft style!

You can refresh the interior, even by slightly updating old thing. You shouldn't spend a lot of money on buying a new dining or coffee table, when if it is possible to do everything with your own hands. By adding a little imagination, you can decorate the table simply amazingly with the help of stencils.

And if you are in company with a table , then you will plunge your guests into envy - after all, you will have an original, unique collection of furniture, which can even be called designer if you try and decorate it. Create to amaze!

Furniture pieces occupy a central place in the interior. So, in the kitchen or dining room the main attribute is kitchen table. In order for the product to last for a long time, housewives cover the tabletop with a tablecloth or special napkins. But what to do if the furniture is damaged or deformed? In this case, you can restore the kitchen table with your own hands. Exist various ways and technologies to improve the appearance of the structure. Therefore, you should not throw away worn-out items because they are easy to repair, decorate and decorate.

Covering with self-adhesive film is the most economical option table updates.

Preparatory work

Before decorating the kitchen table with your own hands, you need to prepare the product. It must be cleaned of dust and dirt. To do this, all elements of the table must be wiped damp cloth. At heavy pollution products can be used special household chemicals. After wet processing of structural parts, everything must be thoroughly dried. Otherwise, accumulated moisture will contribute to the appearance of mold and fungal infections, which will negatively affect the quality of operation.

A wooden kitchen table needs to be carefully inspected. If cracks or gaps appear on its surface, they need to be treated with sandpaper. This will help strengthen the structure and make it easier to apply a new coating.

Very often, the kitchen countertop is equipped with a polishing coating. In order to update an old kitchen table, you need to remove the covering. Experts recommend doing most of the work in an open, well-ventilated room. The floor should be covered with unnecessary cloth or paper.

For finishing work You will need the following tools:

dry rag;
polish remover;
putty knife;
metal wool;
alcohol solution;
brushes;
gloves;
mask for the face;
sandpaper.

The brush is moistened in a special solution used to remove the polishing coating. It can be liquid or thick. For ease of use, it is recommended to pour a small amount of mixture into a separate container. This consistency is applied in a thick layer to a specific area. After this, you must wait until the surface absorbs the solution. For some areas, you can use a stiff brush. Thus, cleaning the kitchen counter with your own hands will not be difficult. To do this, you need to choose the right materials for processing.

Experts recommend that after removing the polishing layer, treat the surface of the table with sandpaper and steel wool, after which the base will become smooth. The resulting surface will become ideal place for decorating and creating new designs.

Tile update

Decorative tiles are one of the most popular materials for cladding kitchen units. For self-registration tabletops, you need to measure it and select the appropriate material for it.

Tile of various textures is a durable and reliable means for covering the countertop. The good thing about tiles is that they are easy to clean and you can safely place hot dishes on them. To decorate the kitchen table, it is recommended to choose elements with a matte finish. To work you will need:

tile;
grout for seams;
plastic crosses;
special glue;
edge profile;
brush;
notched spatula;
building level;
dry rag (sponge).

A special tile adhesive is applied to the prepared and cleaned base of the countertop. This procedure should be done using a notched spatula. During fixation, the material will be firmly and securely fastened.

The tile is pressed tightly to the base of the table. The elements of the product are connected to each other in the desired composition. It is recommended to strengthen the seams between materials using plastic crosses. Thus, the products will be fixed to each other at an equal distance. Using a building level, you need to monitor the position of the parts.

After the main work is done, it is necessary to grout the seams between the tiles. To do this, use a special mixture, which can be purchased at any hardware store. The grout is applied to the base of the table after the glue has completely dried.

In order for the kitchen table to look beautiful and festive, it is recommended to decorate the side parts of the tabletop. This procedure can be carried out using special edge profiles. They can be selected to match the appearance of the tiles.

Restoration with paint

This method, which allows you to unusually update your kitchen table, is available to everyone. You can paint both the tabletop and the legs of the product. The color and design of the new structure depend on the preferences of the owners. In order for the kitchen table to become the central attribute of the room, it can be painted with bright paint. Decorating an interior item allows you to show imagination and skill and create an original masterpiece at home.

For work, it is recommended to purchase quick drying paint and a brush. The work space should be spacious. It is recommended to cover the surface of the table. Some owners prefer to use plain paint, but combining different shades will help create unique design furniture. Some craftsmen use stencils for decoration: they paint the main part in one tone, and create original drawing using a stencil.

Decoupage technique

Decoupage napkins are ideal for decorating any type of furniture.

Aerosol paint applies quickly and dries completely in 2 hours.

With their help you can decorate your kitchen table in an unusual way. The attribute should be decorated taking into account the theme and style of the room. Exists big choice applications that will perfectly complement appearance countertops. In addition, the decoupage technique can be used for the side parts of the structure and can be used to frame the legs.

To work, you need to prepare the following tools:

napkins for decoupage;
PVA glue;
capacity;
brush.

Using glue, the design is transferred to the table surface. For work, you can use both special napkins and images from magazines and newspapers. If defects appear, they can be masked with paint. When completing the work, it is recommended to treat the surface with varnish. This will significantly increase the service life of the product.

Table decoration methods

The variety of decoration methods allows owners to radically change kitchen set. An affordable and practical decoration method is self-adhesive film, which helps you decorate your furniture yourself. It is enough to select the desired shade of material with increased density. Gluing the film to the base of the tabletop allows you to update the product in the shortest possible time.

Some owners use old pieces of wallpaper to decorate furniture. To work, you need to purchase special glue. Decorating with wallpaper will make the interior unusual and original. In addition, you can purchase wallpaper with imitation stone, brick or tile.

In reconstruction old furniture You can show your imagination, ideas and skill. You should not limit yourself to just decorating the tabletop. Replacing the legs will create new design on own kitchen. Updating a table is accessible even to people who have never encountered such work. It is enough to use different decorative overlays And homemade decorations to radically transform this item furniture.

The Restorer+ company produces high-quality and inexpensive table restoration in Moscow.Restoration of a wooden table is possible both in the workshop and at the customer’s home. Location depends on the amount of wear or damage.

For quick and correct cost determination necessary work, you can send several photos of the table to us by email This address Email protected from spam bots. You must have JavaScript enabled to view it. or by WhatsApp 8906 074 10 83.

The gradual wear and tear of furniture is especially noticeable on the surface of kitchen and desk wooden tables. Therefore, restoring a table is a task that almost all owners of solid wood furniture face sooner or later.

Let's look at the most common cases of restoration:

In the photo below you will see a completely damaged countertop surface.

For a high-quality restoration, we completely replaced the veneer on the tabletop, updated the color and coated it with heavy-duty varnish. Now the table looks like new, and thanks to modern wear-resistant materials, it will serve its owners for many more years.

In the next photo we completely repainted the table.

Client request or enter into new interior old desk, because he is dear to him as a memory.

Easily! We call the designer and send several photos of the interior. We select and coordinate the color with the client.

Tables made from natural materials have many advantages, but wood cannot compare with plastic or artificial stone regarding wear resistance.

Paying for luxury beautiful furniture made of solid wood - the need to be careful and periodically carry out restoration of the old table, especially tabletops that are subject to increased load.

Here are some more examples of restoration:

How a table is restored in a workshop.

If you decide to completely renew the table, then an equipped workshop is irreplaceable.

By prior agreement with the client, we provide a truck to transport the furniture to the workshop.

An agreement is concluded with the client for the provision of table restoration services, in which all the details and wishes of the customer are discussed:

Color selection (according to the catalog with samples)

Time frame for completing the work (on average 7-14 days)

Another common case is table restoration at home.

Defects that can be fixed at home:

Chips

Dents

Scratches

Scuffs

Restoration at home involves the local elimination of minor damage to the table. Thanks to modern equipment and the experience of a restorer, we have a unique opportunity to offer our clients table restoration at home.

Wood is valued because it is not only beautiful, but also a natural material. For the same reason, wooden furniture is vulnerable to wear, mechanical damage, high humidity or aggressive liquids.

As a rule, table owners from natural wood The following problems frustrate us:

Exposure stains high temperature, fat, dirt.

Chips from impacts, scratches from hard objects;

Surface deformation due to exposure to steam or moisture.

All these problems can be easily eliminated in a restoration workshop.

Furniture that is varnished comes back into use. After all, lacquered products look rich and add originality and solidity to the interior. Although, to be honest, its surface is quite problematic. It can be easily damaged. A very common defect is scratches. You should not immediately get rid of the damaged table, but should try to restore it. This process can be entrusted to master restorers or you can try to restore lacquered table with your own hands.

Restoration technique

Let's figure out how to restore a varnished table using the restoration method. This is one of the most the best ways returning a decent look to a lacquered table. For example, to eliminate scratches, it is necessary to remove a layer of varnish on the defective areas, and then apply a new one. This method is quite effective and allows you to get rid of any scratches. But not only scratches are a problem for lacquered furniture. The next drawback that may appear over time is the darkening of the varnished surface. As a result of clouding of the surface of the tabletop, the appearance of the table begins to lose significantly in relation to other furniture. This defect can be corrected in a similar way: removing the old layer of varnish and reapplying a new one. This method is quite simple, and it is quite possible to varnish old table with your own hands.

Sequence of restoration work

You can update an old varnished table in several stages. But first you should prepare some tools and materials and think about your safety. So, let’s get acquainted in detail with the algorithm for performing work on restoring a varnished table.

Determining the degree of wear

Before restoring the varnish on the table, you should first assess the extent of the resulting defects.

Choosing material

The question arises, how to remove varnish from the table. To ensure the quality of the restoration, the materials must be selected correctly. Many people believe that problem areas can be removed with alcohol. In some cases, minor defects can indeed be applied with alcohol, but unforeseen consequences may occur, such as roughness, light areas, etc. Therefore, we will focus on specialized materials that will become good helpers for beginners.

Shellac polish. Such material not only helps restore the surface, but emphasizes its originality. This is one of the oldest and most proven materials. The consistency of the polish is more like a liquid rather than a varnish. To achieve a high-quality result, this composition is applied in about 50 - 60 layers. It is because of this that the original deep color. This is very good option, which will remove scratches on a varnished table.
Nitrocellulose varnish. This solution is used to restore large table surfaces. To apply it, sprayers are used, which provide very fast and uniform spraying. At a lower speed, the solution droplets begin to solidify, and the desired effect of a smooth and uniform surface will be quite difficult to achieve. That is why it is not recommended to use standard spray bottles, which additionally form air bubbles that are almost impossible to get rid of.
Pentaphthalic varnish. This is an ideal material for table restoration, as it is quite easy to work with. He doesn't require special devices easy to apply and dries fairly quickly. Apply it in at least 4 layers. You can eliminate the purchase of primer solutions, since the first layer of pentaphthalic varnish will act as a primer. After applying the composition and drying it completely, sanding should be done.

Once you have decided on the choice of restoration composition, you need to pay attention to such a moment as the determination of color. You can use a colorless varnish, or you can purchase a varnish that imitates the color of any wood. In the second case, it is necessary to correctly determine the tone of the varnish.

Step-by-step instruction

Let's bring detailed instructions, which will answer the question of how to properly varnish wooden table. It consists of several stages:

The preparatory stage consists of the following aspects:
the surface of the table is thoroughly cleaned using a specialized composition or using ordinary warm water;
remove the damaged layer using a scraper;
We begin to sand the surface with sandpaper until it becomes matte;
clean the surface from dust.
Application of water-based varnish:
the surface is covered with several layers of water-based varnish;
each subsequent layer is applied after the previous one has completely dried;
after last layer completely dry, grind the surface;
clean the surface from dust.
Carrying out work using acrylic-based varnish:
initially we select a varnish that matches the table surface in shade and gloss;
Having diluted the varnish by 15% with white spirit, we prime the surface;
after the primer layer has dried, we perform intermediate sanding;
cover the surface of the table with undiluted varnish in several layers, allowing the previous layer to dry first;
We perform final surface grinding.
Please note that after applying all layers, the surface should be sanded to give the surface a glossy shine.

By following all the recommendations, you can get a very high-quality varnished surface. It is clear that in order to get decent quality you should use a spray gun. Below is a video on table varnishing and details useful tips on restoration.

To date, buy a new one Coffee table expensive. Especially when it comes to a coffee table, which should not only be functional, but also elegant and beautiful. Therefore, specialists develop everything more ways how to restore a table with your own hands.

Before restoring the table, you need to clean its surface from old paint and repair all cracks and chips.

There are a lot of methods. They are conventionally divided into different types tables according to their purpose. But with the same success, you can apply to the coffee table the methods that are usually used to decorate kitchen or dressing tables. As practice shows, it looks very original.

Surface preparation

Before we begin to consider individual decoration methods, it is advisable to study how the surface should be prepared. After all, this step is the same for all tables, regardless of which restoration method you choose in the future.

First you need to remove the old coating. It is risky to use solvents as they can damage the wood fiber. This is especially true for valuable antique pieces of furniture. In this case, it would be best to use coarse sandpaper and a sander.

As for the legs, if they are carved, you need to carefully sand them with special pieces of sandpaper for hard to reach places. It is strictly forbidden to remove the old coating with screwdrivers, chisels and knives. These tools can ruin the coating.

To level the surface of the table, it is necessary to cover it with a layer of primer.

If the legs are still quite problematic to clean due to their shallow relief, then you can use a thin wire tangle. And if this does not help, then you can use a little solvent. You just need to work with it very carefully, wrap a bandage around the match and dip it in the solvent.

When all the old coating has been removed, all cracks and flaws need to be well sealed. To do this you need to use wood putty. But first, the entire table is covered with a primer, which will protect the wood from damage and will subsequently provide better adhesion to the putty and finishing material. When the primer is absorbed, you can work with putty.

A small spatula is used for this work. Putty can be used either regular white or special colored - everything will depend on how you plan to restore the table further. After the putty has dried, sand everything again with light sandpaper and re-coat with a thin layer of primer.

The table is ready.

Let's consider two main options for restoring a coffee table with your own hands.

They are considered the easiest for beginners and not so expensive in terms of money, which is especially important in conditions of limited resources.

Return to contents

Restoring a table with paint and varnish

The first option is to cover the surface with paint or varnish. So, the paint must first be stirred well. Then take a soft brush and slowly apply paint along the grain of the wood. Note that the top part is painted first, after which you must gradually work your way down. This is very important to observe, since otherwise it will simply be impossible to avoid non-decorative smudges.

The paint must be applied in two thin layers so that the putty does not shrink and is not visible under the paint. When you apply the paint, wait until it dries, then cover the table in the same way as described above, but with a transparent varnish. If you want to see a sparkling gloss, then the varnish is applied in two or even three layers. If you want a more natural matte surface, one layer will be enough.

Restoring a table with your own hands is possible not only with paint, but also with varnish, as well as special solutions that give a silver, gold or bronze tint. And it looks very elegant, especially on antique tables.

Return to contents

Restoration with mosaics

The second option is to cover the table top with mosaics. Mosaic is now being released different types. For a coffee table that will be located in the living room classic style, you can choose a mosaic with some kind of ancient or city landscape. If you want to place the table in the bedroom, you can choose calmer romantic patterns such as flowers, hearts, angels or cute birds and animals.

So, first the table is covered with a base, which will be the paint of the selected color. It is important to choose a shade that contrasts with the future mosaic - either very dark or very light. Due to this, the pattern will look brighter and more natural.

After the paint has dried (and this is at least 2 days), you need to mix PVA glue or special tile adhesive for mosaics well. After this, you immediately need to press the mosaic strictly according to the instructions so that the drawing turns out correctly. To be more sure, you can coat with reverse side mosaic, only the layer of glue in this case should be very thin.

About a day after the mosaic has set, you need to grout it. For this purpose it is used special remedy in the form of a powder or paste that matches the pattern. You can also use a contrasting color grout, which in some cases looks good.

Before grouting, experts recommend masking tape seal the edges of the tiles so that they do not get too dirty. The grouting itself is done either using a small spatula or a sponge. It all depends on which product you choose. After finishing the work, wait for the grout to dry, remove the tape from the mosaic and use a cloth to remove any accidentally deposited residue on the mosaic.

The legs in such a table can simply be painted or varnished, since the mosaic will no longer be inappropriate here. The color of the legs is selected according to your taste. But it’s best if it differs favorably from the main picture. You can simply coat them with a tint varnish that will highlight the naturalness of the wood.

So, two methods of restoring a coffee table are considered. Of course, there are many more options: this includes decoupage techniques, wallpapering, and decorating with oilcloth. But the methods described above are basic. Once you learn how to do them, everything else will be easier.