Affordable in terms of cost and execution technique painting the ceiling with water-based paint DIY requires some preparation. There are some nuances in applying paint to the ceiling and in choosing tools for work. In addition, the success of the repair also depends on the condition of the surface on which you plan to apply the water-based composition. Let's look into the details and find out the details.
Properties of water-based paint
Let's briefly look at the material itself. Why more and more people are abandoning traditional whitewash and decorating their ceilings water-based paint? Because it gives the same effect of pure whiteness, but without the disadvantages inherent in chalk and lime. The composition of the aqueous suspension contains special pigment substances and polymer particles that increase its wear resistance.
After applying paint to the ceiling, the water base evaporates, and the polymers form a thin film that is impervious to moisture. Thanks to this, water-based paint does not crumble, retains its fresh appearance for a long time, is easy to clean and does not deform from moisture. It suits most consumers and for the price. Another plus is the high environmental friendliness and safety of the water-based composition. It does not have the characteristic properties of many colors pungent odor and does not cause allergic reactions.
Painting options and their features
Before you start finishing the ceiling, you need to find out what surfaces you can apply it to. water-based coating. Obviously, the most competent way is to clean the ceiling from the previous coating. But do we always resort to such a procedure when performing repairs ourselves?
If you are satisfied with the quality of the ceiling finishing with the old coating, and you just want to update it, then painting the ceiling with water-based paint old paint quite possible. The main thing is to conduct a thorough inspection of the coating, remove obvious contamination, and check for small cracks. Unfortunately, if you don't remember what primer was used for the original finish, you will have to forego applying the water-based slurry to the old paint. Alum and vitriol primers will destroy the water emulsion, no matter how long ago the ceiling was painted.
Important! To ensure your hard work isn't in vain, apply new paint to a small area and wait a few hours. If the new coating does not swell or bubble, feel free to use water-based emulsion.
When painting the ceiling with water-based paint over whitewash, you should take into account the thickness of the chalk layer. Only on thin whitewash that is well adhered to the surface will the water-based composition be applied without problems. In other cases, you will experience peeling and deformation.
Choosing a tool
To eliminate unnecessary trips to the store, we immediately decide on the tool that we will need to complete all the work. A sample list is:
- thin spatula
- bucket or paint tray for paint
- primer roller
- paint roller
- brush (choose a narrow one for painting small details)
- rubber gloves and safety glasses
Our main tool, on which depends high quality The final result is a roller. Choose a roller for painting the ceiling with water-based paint with medium pile and a long handle. Neither foam rubber nor velor rollers are suitable for working with water-based composition. The first forms bubbles that are difficult to get rid of, the second absorbs little paint, which leads to the appearance of streaks and stains.
Advice! When purchasing a roller, check it for shedding. Roll the tool over your hand and make sure there are no lint left on it.
Preparatory work
If you want to achieve the perfect result when working with water-based paint, create optimal conditions for her. Let's figure out how to prepare the ceiling for painting with water-based paint so that it fits perfectly on its surface.
First stage
Delete old whitewash. If it is chalk or lime, wash off the ceiling warm water before concrete base. Remove oil or enamel paint using a spatula.
Advice! In areas where the old paint cannot be scraped off with a spatula, use a thinner.
Second phase
It’s great if your ceiling is a flat surface, without structural seams or joints. If there are seams, you need to remove the putty from them. We do this using the same spatula.
Third stage
You will need a ceiling primer for painting with water-based paint, which can be purchased at the store. Take a soft paint roller and apply primer with one thin layer over the entire surface of the ceiling. This procedure will help the putty to securely attach to problem areas, and it will not fall on your head.
Fourth stage
The last step to start painting is plastering. We dilute the putty and cover everything with it problem areas. We wait for the putty to dry and carefully smooth out all the irregularities with fine sandpaper. Using a level, check the evenness of the surface and, if necessary, apply another layer. plaster. Leave for 24 hours to dry. Our preparation of the ceiling for painting with water-based paint is complete. Let's move on to painting.
We paint correctly
Let us immediately note that painting the ceiling with water-based paint using a spray gun is faster, but without the proper skill it turns into a disaster. Drops of paint scatter in all directions, and the surface is decorated with annoying stains and washouts. However, working with a roller has its own nuances.
- Carefully read the instructions included with the paint can. There are types of paint that need to be thinned, and there are those that do not require additional administration water. Mix the prepared paint thoroughly and pour a small amount of in a bucket or tray.
- Dip the roller into paint on one side and roll it several times along the wing of the tray or on a piece of hardboard. It is necessary that the roller is completely covered with paint. If the first “bathing” was not enough, repeat the procedure.
- Let's move on to painting the ceiling. Apply the paint evenly, in strips 0.5-1 meter wide. We start painting from the wall opposite the window. We move the roller across the length of the ceiling, not forgetting to dip it in paint and roll it out again. When painting transversely, the joints are less noticeable.
- Each subsequent strip should overlap the previous one by about 15-20 cm.
- Let the first layer of paint dry.
- We apply the second layer so that the stripes go towards the light source, that is, towards the window. Remember: the first layer is transverse, the second is longitudinal. In both cases, we start painting from the far wall.
Advice! It is better to check the ceiling for leaks while standing on the floor. They are invisible up close, but clearly visible from below.
To avoid constantly jumping off the stepladder, ask someone in the household to inspect the ceiling from different angles for any unpainted marks. They must be removed immediately, before the paint dries, otherwise you are guaranteed to get a spotty surface.
Apply with a thin brush ceiling skirting boards and other decorative elements.
Reading time ≈ 9 minutes
In an apartment, this is the most affordable finishing method today. High quality and modern materials can achieve amazing results. Whitewashing is becoming a thing of the past, and water-based or acrylic paint allows you to decorate the surface in any tone and highlight the advantages of the interior. Let's look at how to paint the ceiling correctly so that decorative coating It was durable and retained an attractive appearance for a long time.
Selecting Special Paint
IN hardware store It’s easy to get lost in the variety of different water-dispersible and soluble ceiling paints. Of the large abundance of species, the most common can be identified:
- Acrylic. One of the most sought-after and popular types of paint among many builders and craftsmen, it does not require much consumption when painting. To make the ceiling pure white, it will be enough to apply only two layers. The paint has an elastic structure, can be tinted (mixed to find the desired shade), universal, environmentally friendly and does not cause harm to health, abrasion resistant, durable, easy to care for, it can be wiped clean damp cloth and washable, is resistant to moisture and ultraviolet radiation, and has vapor-tight properties. This type of paint does not emit toxic substances, has no odor, perfectly heals small cracks and removes all defects on the surface. A feature of acrylic is its darkening after drying; this should be remembered when choosing a color in a store.
- Latex. The most expensive type of paint, it has a powerful water-repellent effect. The painted surface can be washed repeatedly with soapy water; the paint easily heals microcracks and is resistant to moisture, abrasion and mechanical damage. The downside is the low level of light resistance, as well as difficult cleaning when removing. Latex paint is excellent for textured surfaces and has a thin, elastic matte layer. The coating is porous in structure, therefore it allows the material under the paint to breathe. The paint contains polymer fillers, so when painting it does not drip from the ceiling, is easy to use and does not peel off.
- Water-based. To better understand how to paint a ceiling with water-based paint, you need to have an idea of its properties. This type is widespread among masters and beginners, as it is non-toxic and does not pose any harm to health. In addition, this paint does not emit fumes and does not have a specific odor. It is practical and versatile, suitable for almost any surface except glossy paint. Easily washed off with soapy water if necessary, suitable for further painting. This a budget option For simple repair, since the cost of paint is not high.
- Silicone. Produced on the basis of silicone resins, they combine the properties of organic and mineral coatings; they can be called new generation paints. This type is capable of creating a durable and elastic coating, tightening the smallest cracks and hiding unevenness, removing microscopic defects on the ceiling, is vapor-tight, and resistant to abrasion and moisture. This paint has water-repellent properties, so it is not afraid of contamination. It is environmentally friendly and safe for health, does not emit toxic fumes and substances, is easy to maintain and operate, and is durable. Silicone paint has a fairly high cost, which really justifies its high quality indicators. To learn how to paint a ceiling without streaks, be sure to purchase silicone pigment. This way the surface will be even and smooth, without any smudges or defects.
- Silicate. This type is suitable for ceilings in technical rooms and large areas. industrial enterprises. The paint is able to protect the surface from the risk of mold formation, does not require additional antiseptic treatment, and is suitable for swimming pools, garages, basements, warehouses, entrances, etc. The basis for the production of this type of paint is taken liquid glass(silicate), therefore these dyes have high bactericidal and antiseptic properties.
- Mineral. When making this type, cement or slaked lime is used as a base. The properties and appearance of the paint are similar to ordinary whitewash and are moisture-proof.
- Polyvinyl acetate. Made on the basis of PVA glue, durable, resistant to moisture. However, this type of paint can leave marks when applied and does not wash off well, so you should be as careful and careful as possible when painting.
As for the aesthetic side of the issue, ceiling paints are divided into:
How to choose a tool
The convenience and quality of tools for work determines the comfort of the painting process and the final result. The most important and necessary tool for painting the ceiling - this is a roller. There are many models that differ from each other not only in technological properties and functionality, but also in cost and quality indicators. The most common of them:
To understand how to properly paint a ceiling with a roller, when choosing a tool you need to pay attention to the following nuances:
- Check the quality of the tool by carefully inspecting all seams and joints on the material. They should be almost invisible.
- When choosing a lint roller, pay attention to the lint, pull it and see if there is any left in your hand.
- Remember that the quality of painting will also be affected by the absorbency of the roller. Therefore, study the manufacturer's information.
In addition to a paint roller for painting the ceiling, you will need:
- Painting tray (tray with a textured bottom for rolling out a roller).
- Fine sandpaper.
- Small spatula.
- Masking paper tape.
- Polyethylene film.
- Stepladder or wide table.
- Paint brushes different sizes.
Preparing the surface
The ceiling should be thoroughly cleaned of old traces of finishing: paint, plaster or. All protrusions must be carefully knocked down and cleaned off. If cracks are present, apply a little primer and then coat the surface finishing layer putties. If the ceiling shows strong differences in height and unevenness, you will have to use plaster to level it. In this case, you need to plaster in several layers in order to achieve the maximum smooth surface. The ceiling should be puttied in the direction from the corner to the opposite wall. When the putty has dried, it is primed and then painted. How to properly prepare the surface and paint the ceiling is shown in this video.
Primer
Applying a primer to the ceiling is a mandatory and important step. preparatory stage. This way you will secure the result of putty or other old surface, increase adhesion, provide protection for the future paint layer from immediate moisture absorption. The primer can also protect the surface from the possible appearance of mold and mildew. The application process is simple; you should ensure that no excess or unnecessary drops of soil remain on the ceiling.
The ceiling is usually primed in two layers, after which you should wait until the primer dries completely. Then the surface must be sanded and all construction dust using a brush and a clean dry cloth.
When preparing the ceiling, do not forget about the following nuances:
Dyeing process
The ceiling is leveled and free of dust, which means it is ready for painting. Water-based paint must be diluted based on the proportions indicated on the package and thoroughly stirred to a thick and uniform consistency.
Exist various options ceiling finishing. Today, stores offer a huge range of materials for this. Water-based acrylic paint is considered one of the most popular and relatively inexpensive. For the ceiling this is a completely acceptable option. Many people believe that this type of finishing is the least labor-intensive of all. existing options. In this article we will find out if this is true.
Advantages of the material: consumer opinion
Why do many owners choose water-based paint? As consumers themselves say, this material has many undeniable advantages. First of all, home craftsmen note that this coating dries very quickly. In some cases, just a couple of hours is enough for this. Many people choose coloring compositions of this type because they are safe not only for humans, but also for pets. The composition does not have any caustic or unpleasant odor. So after application there is no need to urgently leave the room. The composition can be given different color. For this purpose they are used special colors on water based. If you follow the recommendations, the dyeing process does not cause many problems. Consumers consider one of the undoubted advantages of the compositions to be that tools can be easily cleaned after application.
Possible difficulties
Whitewashing ceilings with water-based paint should be done very efficiently. Otherwise, glare and streaks will be visible on the surface. It must be said that painting the ceiling with water-based paint may not work the first time. It is especially difficult to achieve an ideal surface for those who have never done this before. At the same time, re-painting the ceiling with water-based paint will not hide, but on the contrary, will increase the visibility of defects. There are several nuances that are usually not taken into account.
Why do stains appear on the surface?
The occurrence of defects can be due to several reasons. First of all, before whitening the ceiling with water-based paint, you should take into account the lighting features in the room. Stains can also appear when using a low-quality composition. The choice of tool with which to paint the ceiling with water-based paint should be approached with the utmost care. An incorrectly selected or poor-quality roller can cause uneven distribution composition. How to purchase suitable tool? Experts do not recommend choosing a velor or foam roller. As the owners of the premises in which the ceilings were whitewashed with water-based paint say, the best tool is one with long pile or threads. It should also be remembered that after drying, the composition forms a smooth and fairly durable film. It can give off glare in daylight. If the technology for painting the ceiling with water-based paint is not followed, the work is done in a hurry, and optical effects are not taken into account, then the surface will be simply terrible.
Lighting
Before whitening the ceiling with water-based paint, it is necessary to evaluate the characteristics of the light distribution in the room. As a rule, it is necessary to take into account the type of flooring. If it is shiny and smooth (for example, parquet, ceramic tile or laminate), then the lighting on the ceiling will be much brighter than with a pile covering. Taking into account the optical effect that is obtained when light is reflected from the floor, the surface is covered with the first layer in the direction from the window to the opposite wall. The next one, on the contrary, is parallel to the source of natural light entering the room. With a chaotic distribution of strokes, a rather unpredictable “reflection” effect can result.
Coating composition
Both layers require the same brand of paint. The ideal option is for the mixtures to be from the same batch. If the composition has frozen to such a state that ice has formed in it, then it should not be used. In any case, as the masters note, in such a noticeable area as the ceiling. Separation of pigment components may have occurred in the mixture. Before doing this, it must be thoroughly stirred. There should not be a single lump in the mixture.
Tool
A roller is the most optimal device for applying water-based paint for the ceiling. Reviews from residential owners indicate that applying the mixture with a brush is a very labor-intensive task. In addition, in the latter case there is a greater likelihood of streaks and glare. The roller is bright yellow and suitable for use.
Surface preparation
This stage, according to experienced craftsmen, is decisive in the process of painting the ceiling. The surface must be dry and perfectly clean. To soak the old coating, you can use scouring brushes or a water spray in a vacuum cleaner. Next, the whitewash must be scraped off with a spatula down to the concrete base. After this, the surface is washed again. The ceiling must be allowed to dry. If the surface has been covered with wallpaper, all remnants should be removed. adhesive composition. As experienced craftsmen note, the old coating layer is usually removed in whole layers. The surface must be thoroughly cleaned, otherwise the new coating will lie unevenly, with defects, and will not adhere well.
Painting the ceiling with water-based paint: nuances
In the process of work, as experienced craftsmen assure, there is not a single moment that would not affect the result. At the very beginning, before stirring the paint, you need to read the information on the packaging. Some manufacturers do not recommend further diluting the composition with water. This paint should be thoroughly mixed directly in the factory container. Otherwise, there is a risk of leaving the pigment components in the jar. Experienced apartment owners involved in self-repair, adapted to mix the composition using a drill and a special attachment - a mixer. If the mixture needs to be further diluted, this should be done by adding small portions of water. In this case, you need to continuously mix the composition. When adding water, the main thing is not to pour too much of it, since it will not “thicken” the paint back.
Device for convenience
After the paint is mixed, it must be poured into a container with a wide bottom. A plastic cuvette is ideal for these purposes. It is usually used when developing photographs. If there is no such device in the house, then it is quite possible to replace it wooden box for fruits. You will first need to cover the bottom with polyethylene.
How to paint a ceiling with water-based paint?
The paint roller should be dipped into a container (special paint bath) with the composition and rolled over the surface on it until completely and evenly distributed. For convenience, a long handle is attached to the tool. Applying the layer can be called the most crucial moment. As professionals say, movements should be straight, fast and confident. At the same time, one should not forget about the direction. The first layer is applied from the window to the wall. As soon as the paint becomes scarce, the roller is dipped into the container again.
Subtleties
Painting the ceiling with water-based paint is not an easy job. One nuance needs to be taken into account when applying a layer. The area covered with the composition should not be looked at directly from bottom to top, but at an angle (approximately 30-40 degrees). In this case, all defects and errors in the layer will be visible. It would be better, of course, if there is an assistant who can tell you where there are unpainted places. While the paint layer has not dried, errors can be eliminated. But once it dries, it can only make things worse. As experienced craftsmen say, it is highly not recommended to be distracted from the process. Painting the ceiling with water-based paint is done without lunch breaks or smoke breaks. Applying a second coat can either correct errors or make them worse. It should be remembered that re-painting is carried out after the surface has dried. If the defects cannot be corrected with the second layer, it is not advisable to apply the composition a third time. In this case, only removing the entire coating and repeating the process from the very beginning will help.
Reducing work time
Any painting work using a brush or roller is considered quite labor-intensive. The process often takes quite a long time. Painting the ceiling with water-based paint using a spray gun will significantly speed up the process. This option for applying the composition has a number of features. Let's consider them further.
Preparation
The paint, as when applying it with a roller, is thoroughly mixed beforehand. In this case, it is necessary to absolutely eliminate the presence of lumps in the mixture. If they remain, they can clog the spray gun and the mixture will go uneven. If it is intended to give the composition any shade, color is added during mixing. You need to pour it in small portions. It is unacceptable to leave pigment stains in the paint. The composition must be homogeneous. Experienced craftsmen It is advised to prepare the paint with a reserve, because if it runs out and the surface is not completely covered, then it may not be possible to choose a perfectly accurate tone.
Important Details
It should be remembered that when applying the mixture with a spray gun, a fairly large volume of the sprayed composition hangs in the air. It will settle not only on the surface being treated, but also on all others that are in the room, not excluding furniture. In addition, it is necessary to protect the face and especially the eyes from spray paint. Therefore, work must be carried out in a respirator and goggles. It is better to remove all furniture from the room. If this is not possible, then the items must be carefully covered with polyethylene, securing it with tape.
Progress
Using a spray gun allows you to get an ideal surface without defects. When applying, it is very important that the layer is thin and even. Immediately before application, move the spray gun nozzle slightly to the side and press it briefly several times. Once the spray is uniform, you can begin applying to the surface. The spray gun should be kept at a distance of approximately 30-50 cm from the ceiling. The paint jet is directed directly perpendicular to the surface.
How to make the process easier
You should mentally divide the surface into squares. The width of each should be approximately equal to the length of your arm. The areas should be painted one at a time. The layers are applied first transversely and then longitudinally. When using a spray gun, under no circumstances should you stop or linger in one place. In this case, the layer will be too thick or the paint may bleed. Work should be carried out at the same pace.
How to apply the composition
The recommended number of layers is three. Each new one is applied only after the previous one has dried. Do not paint over a fresh coat of paint or primer. Otherwise, the mixture will lie poorly and may peel off quite quickly. This will lead to a complete redesign. To create the first and third layers optimal time morning and evening hours are considered, when there is good daylight in the room and direct rays of the sun do not dazzle. Although this recommendation does not have to be followed exactly. The most important thing here is that all errors in the application of the composition are visible, and the angle at which the light falls is as close as possible to constant for the room being repaired.
One of the most popular finishing options today is painting with water-based paint. But sometimes such finishing is complicated by the presence of old paint. This article will tell you what needs to be done in order to paint a ceiling with an old layer of finishing.
Today, painting the ceiling with water-based paint is considered the most preferred and popular option. The times when a variety of chalk and lime mortars are a thing of the past. Therefore, at the moment, coloring compositions are characterized by significant diversity. The range of water-based emulsions, as one of the most popular types, is also quite large today. As a result, the painting process ceiling surface if you have an old layer, you should start by selecting suitable material finishing.
Today, water-based paint is represented by the following compositions:
- Acrylic. These are the most common compositions today. They are characterized by high performance characteristics, as well as gradation according to various types of premises. Therefore, among them every person will find best option. The cost of acrylic compositions will be slightly higher than the average among offerings in the paint and varnish market segment.
- Latex. These compositions fit perfectly on a variety of surfaces. At the same time, the resulting finish is perfectly washable. The only drawback Such compositions are considered to cost several times more than other products.
- Silicate. The basis of such products is liquid glass. An excellent base for silicate compositions is a stone or concrete surface. Moreover, they are most often used for finishing production premises, but silicone compounds are used extremely rarely for the home. The peculiarity of such paints is that they are elastic, moisture resistant, and can also mask cracks up to 2 mm. But their cost is higher than the average market price.
- Polyvinyl acetate. This finish cannot be washed, as the material has low moisture resistance. Therefore, it can only be applied to the ceiling in dry rooms.
As you can see, the range of paint and varnish products is quite extensive and can satisfy any requirements. Therefore, before purchasing finishing material It is necessary not only to know the parameters of the room where the repairs will be carried out, but also to study in detail the capabilities of the available coloring compositions. But many experts recommend giving preference to a coating that, once applied to the ceiling, can be washed. Such compositions will allow you to keep the surface clean, and not have to do repairs every time for the purpose of updating.
Preparation
If you decide to refresh your ceiling with a new paint composition, then for the success of the painting work you should quality training. Even if the surface is finished with water-based paint, the old finish, whatever it may be, must be cleaned off. This is due to the following reasons:
- the layer of paint has already lost its former attractiveness;
- cracks have appeared on the ceiling, due to which a collapse is possible after applying a new layer of finishing to the surface;
- Mold may well develop under the old layer of finishing, which will lead to the fragility of the repair.
Removing the old layer of water-based paint from the ceiling surface is carried out as follows:
- We wet the old coating generously with water. You can use a hand sprayer or roller for this.
- Next, leave the surface for some time for better soaking.
- After 20 minutes, repeat the wetting procedure. In this case, windows and doors must be open.
- After about 30 minutes, bubbles will appear on the ceiling. Take an iron spatula and scrape off the old coating.
After removing any finishing residue, rinse the surface thoroughly. clean water. To do this you need to use a foam sponge. If there are defects in the starting surface (cracks, potholes, etc.), they should be covered with putty. When it dries, use sandpaper or sandpaper, the surface should be leveled.
For putty, many experts advise choosing universal polymer compositions. They are, of course, more expensive than cement or gypsum, but it will be much easier for beginners to work with them.
Please note that if there are strong differences in the surface, it is not recommended to fix this kind of defect with your own hands. To do this, it is better to call an experienced plasterer or install suspended ceiling structures.
If the differences are no more than 3 mm, then there are two alignment options:
- Applying plaster to in the right places. For these purposes it is necessary to constantly use a level.
- Usage ceiling tiles. It can be painted very easily and quickly with water-based paint. At the same time, you can choose various decorative patterns using such slabs.
After all the manipulations described above, in order for the painting to be successful, the prepared surface must be primed. The priming process itself is not complicated. But if this is not done, the final finish may become stained in the future, which will ruin its aesthetic appearance.
For priming, you should use professional solutions that have deep penetration. In this case, for greater effect, apply the primer in several layers. It will be enough to prime twice.
Some people, in order not to spend money on buying a primer, prepare it themselves. For these purposes, purchased water-based paint is suitable, which is simply diluted with water. By the way, any composition fits perfectly on itself, even in diluted form.
It is also worth noting that after removing the unusable finish, mold may be exposed. To combat it, special antiseptics should be used. They not only destroy existing mold, but also prevent its reappearance in the future.
Instead of expensive antiseptics, you can use self-prepared solutions (for example, a five percent solution copper sulfate). Treatment should be done after removal old decoration and before puttying or applying primer.
By correctly and consistently performing the above-described manipulations, you will be properly prepared for painting.
Dyeing technique
The staining technique includes two important stages:
- choosing a tool for painting work;
- painting a previously prepared surface.
Let's look at each stage in more detail.
Painting ceilings always begins with choosing a tool. Painting can be carried out with the following tools:
- Tassels. In order to effectively paint any surface, you need to use brushes of different sizes. It is worth noting that brushes are not very effective for large areas of work. However, they do not allow you to apply coloring composition even and thin layer. They can be used to qualitatively paint various decorative convex finishing elements, as well as the junction of walls and ceilings.
- Roller. It is considered the most effective tool, but only when correct selection. The dimensions of the selected roller directly depend on the area to be painted. The larger the area, the thicker and longer the roller should be. In this case, you need to pay attention to the material from which the roller skin is made. For different colors Various skins are suitable. For work with water-based compositions You should choose velor skins and those that have a long pile. Also, for working with the ceiling, you need to choose products with a long handle. It will allow you to effectively carry out Painting works without using stairs.
- Professional spray gun. This tool is much more expensive than a roller and brush. Moreover, not everyone can cope with it.
Experts recommend using a roller for painting, since with its help you can quickly and efficiently apply an even coating to a fairly large area. large areas. But in this situation, brushes will still be needed to paint the corners. Please note that the paint tray should be selected depending on the size of the roller purchased.
Do not forget that you need to apply the water-based emulsion only when the base is completely dry after priming.
Painting the ceiling with water-based paint is carried out according to the following algorithm:
- Open the can of paint and mix it well, touching the lower layers. This must be done in order to obtain a uniform color of the composition.
- Next, pour the paint into the tray.
- First you should paint the corners and all places that are inaccessible to a roller. To do this we use a brush.
- After this, dip the roller into the poured composition.
- On the raised area of the tray, squeeze the roller so that paint does not drip from it. As a result, the composition will be evenly distributed over the surface of the roller.
- The first layer should be applied parallel to the direction of the natural light available in the room. One area should be covered with a roller several times to avoid dark spots and sagging. Painting is done with an overlap on the previous strip. Moreover, the entry should be half the size of the roller. It is best to make W-shaped movements.
How to paint a ceiling with water-based paint? The abundance of the most different ways finishing does not exclude the popularity of painting the ceiling today. This coating attracts with its affordability and the ability to do all the work yourself. However, not everyone knows how to properly paint a ceiling with water-based emulsion.
The article talks about the nuances of preparing the base for applying paint, and about the technology of painting the ceiling with water-based paint with your own hands.
What compositions are used to paint the ceiling?
In the old days, the most popular ceiling coverings were chalk and lime mortars. The only advantage of such coatings is their low cost.
Now similar work is carried out with water-based paints:
- The most popular of this type of coating are acrylic paints. Their features:
- enough good properties during operation;
- the use of different compositions depending on the type of premises where repairs are required.
Compared to other similar ones, their cost is slightly higher.
To paint the ceiling you will need:
- Spray gun (see Types of spray guns: how to choose the right one). Using such a device is the most convenient, fairly fast and high-quality coating application method. But such a device costs quite a lot of money, which is often beyond the reach of the average person who likes to do the repairs themselves. In this case, you should use cheaper tools, which are shown in the photo.
- Paint roller- This is the main tool for finishing the ceiling.
