Since you have decided to become a self-taught electrician, then probably after a short period of time you will want to make some useful electrical appliance for your home, car or cottage with your own hands. At the same time, homemade products can be useful not only in everyday life, but also made for sale, for example. Actually the build process simple devices at home is not difficult. You just need to be able to read diagrams and use the ham radio tool.
As for the first point, before you start making electronic homemade products with your own hands, you need to learn how to read electrical circuits. In this case a good helper will be ours.
Among the tools for novice electricians, you will need a soldering iron, a set of screwdrivers, pliers and a multimeter. To assemble some popular electrical appliances, you may even need welding machine, but this is a rare case. By the way, in this section of the site we even described the same welding machine.
Special attention should be paid to available materials, from which every novice electrician can make basic electronic homemade products with their own hands. Most often, old domestic parts are used in the manufacture of simple and useful electrical appliances: transformers, amplifiers, wires, etc. In most cases, novice radio amateurs and electricians just need to look for all the necessary tools in a garage or shed in the country.
When everything is ready - the tools have been collected, spare parts have been found and minimal knowledge has been obtained, you can proceed to assembling amateur electronic homemade products at home. This is where our small guide will help you. Each instruction provided includes not only detailed description each stage of creating electrical appliances, but is also accompanied by photo examples, diagrams, as well as video lessons that clearly show the entire manufacturing process. If you do not understand some point, you can clarify it under the entry in the comments. Our specialists will try to advise you in a timely manner!
As they say, there is never too much space in the garage. Men who spend a lot of time in the garage will agree that in some cases every minute and every square centimeter of free space counts. That is why a garage master needs competent organization of his workspace. Various people help out and help here in every possible way. devices for storing building materials and work equipment, machine parts and other things necessary for work. To ensure that your electronic, garden and garage gadgets are always in their place, use the following devices:
- stands;
- shelves;
- retractable panels;
- racks;
- organizers for tools.
For clarity, we also offer homemade products for the garage and home handyman do-it-yourself YouTube video will reveal all the nuances of organizing your workspace and suggest fresh ideas.
DIY crafts at home with your own hands
Man has been making homemade crafts since prehistoric times. Actually, all industrial processes are the improved once handicraft or home-made developments of folk craftsmen. Sometimes we don’t even think about the fact that we pay for things that we can do with our own hands. DIY homemade schemes are easy to find online, and the materials can be purchased at a hardware store or found at home.
For example, from cardboard box and a piece of fabric You can make a convenient portable organizer for towels and other textiles.
The topic of storing all sorts of little things is inexhaustible, fortunately, as is the number of ideas. Good ideas for decor You can also draw from ordinary things - let them be buttons or empty tin cans. 
Cool shelves are made from ordinary drawers. How do you like this idea?
As you have already understood, if you have detailed instructions, it is not so difficult to make homemade products with your own hands at home. The video will help you understand all the nuances of this have a nice lesson. Useful tips, interesting ideas- Everyone should watch it.
DIY crafts for the garden and garden with your own hands
At the dacha there is usually some free time for creativity and arrangement of the surrounding space. That's why It's worth having a few on hand fresh ideas
to implement them on your own summer cottage. Country homemade products at home, with your own hands, they can be ingeniously simple. From scrap materials you can make unexpected and extremely useful things for home use. 
Ordinary pebbles turn into fairy-tale animals.From an old teapot It makes a wonderful flower pot.
Used tires– it has already become a classic in the world garden figures.
Stylish lamps For country interior – do it yourself from regular can
and candles (don’t forget about safety precautions).
– great idea for a small cottage. 
Do-it-yourself homemade products for the garden and garden are often made by yourself, without unnecessary time and financial costs. Perhaps you had no idea how useful it is for household will turn out to be plastic bottles. Plastic bottles that have gone out of use can serve as the basis for an incredible decorative flower bed. 
Cool “blooming” pillars will significantly decorate your garden space.
Do-it-yourself garden furniture, successful homemade products: photos and drawings
IN previous sections We told you about homemade products that will become indispensable for the household and home life. However, we should not forget about rest, before which, nevertheless, you will have to work a little. Cozy armchairs, various tables and benches, swings and hammocks- all this country and garden bliss can settle on your site. We invite you to familiarize yourself with photo instructions and manufacturing drawings. garden furniture. We have selected the best options for you.
Nothing brings joy to the house more than something made with your own hands. And it's true various homemade products for the home not only fill life bright colors, but also give the interior uniqueness and some zest. And it’s certainly impossible to forget about such a thing (even if it’s a small trinket). Moreover, it is not so important that these are homemade products made from wood for the home, from paper or plasticine. There are millions of options and methods for making various gizmos, and today we will look at several of them. So how to do it interesting homemade products for home?
Shelf made of tin cans
It would seem that such a trifle is a coffee can. However, even from it you can make a beautiful, convenient and useful shelf for storing household items. Often, various souvenirs and memorable photographs are stored in such containers. There is little practical benefit from this homemade product, but such jars look very harmonious.
Details about the procedure for making this craft
1. First, holes are made in the jars using a drill or a special knife-ripper (in the top and bottom - 3 points, and in the walls of all the rest - 2 points).
2. Next, the jars are fastened together. Nuts and screws are used as fastening elements small sizes. By the way, to get the desired (beautiful) result, you will need to have at least 5-6 of these jars.
3. Afterwards, a hole is punched in the containers for screws. 1-2 holes are made in the bottom of the jars located in the upper part of the structure to attach the shelf to the wall. The finished homemade product is screwed on with a screwdriver or screwdriver. To do this, dowels are first driven into the wall.
That's it, now homemade products for the home are being introduced. Rest assured - various small items will definitely not get lost in such jars. Thus, you kill two birds with one stone - decorate the interior and get rid of clutter in the house.
Homemade crafts for home - how to make a clock on a CD/DVD?
The clock on the CD is also very interesting and original version interior decoration.
As you can see, the design of this device is very original, and therefore it will look organically against the background of any interior (perhaps it will become its highlight). Such “smart” homemade products can be made for the home in a matter of minutes. We will tell you in more detail about all the stages below.
So, how to do it yourself homemade watch? First, you will need to prepare the appropriate materials - a CD/DVD (you can choose the design of its front part at your discretion) and a cover-case for it (the distance between the walls should be at least 0.05 centimeters). It is very important that the last part does not have any chips or scratches. To make the work easier, you can purchase a ready-made watch and then simply replace the standard dial.
It must be a pointer, otherwise you won’t be able to make a homemade product. You should also do the numbers. There should be a total of twelve of them. These can be cardboard, paper or plastic circles. Their thickness should not exceed two millimeters. Rhinestones can be used as decorations. You also need to prepare about 30-40 centimeters of wire, a piece of leather or fabric and “Moment” type superglue. The core of this entire design will be the CD. We will redo it first.
First you need to mark the disk into twelve equal parts and glue the numbers to the marked points. In this case, the sectors should not go beyond outside diameter devices. How do you make homemade products for your home? After the sectors, we proceed to the clock itself - remove the arrows and place them exactly in the center of our disk. By the way, before attaching them, you can stick some interesting photograph on the disk, which will make the design of the watch even more original.
To increase the size of the arrows, use thin metal strips. To achieve the desired result, it is enough to apply glue to them and carefully position the part evenly over the entire surface of the guiding elements. The arrow mechanism itself is attached to back side disk.
What to do next?
So, the base of the watch is almost ready. The next step is to make holes in the device along the contour of the arrow mechanism. The field of this disc is installed in a case. The mechanism itself is brought out through the hole and closed tightly. Now, using wire, a stop is made, which is glued to the back cover. To make it more durable, glue a piece of fabric or leather on top of it. This will make the stop not only strong, but also beautiful, since the excess part of the wire will no longer gape on the watch as before. That's it, the homemade watch from a CD has been successfully made. All that remains is to insert the AA battery and set the time. By the way, you can also make a battery yourself.
How to make a source of energy from a lemon?
As we know, this fruit contains a lot of acid, accordingly, when correct actions A lemon can be turned into a real mini-battery.
Of course, the charge from such a “battery” will not be enough to work household appliances, however, for operation or charging mobile phone this current is quite enough.
Making homemade crafts for the home - preparing tools to turn lemon into a source of constant energy
During the work, you will need tools such as a knife, soldering iron, drill, iron pin, as well as several pieces of insulated copper wire. Among other items, it should be noted the need for one glass or shot glass, a pair of wooden sticks and the same number of push pins. And, of course, our main source of energy will be lemon. You can also use orange, but it contains much less acid, so the charge from it will be minimal.
Instructions
First, cut the lemon in half. This is necessary so that it gives more acid necessary for the Lemon to be fixed in the glass so that it does not roll around the table. Next, copper and iron pins are inserted into its flesh along the entire perimeter at a distance of 0.5-1 centimeter. Our “minus” will be iron, and our “plus” will be copper.
Pieces of wire are attached to all the pins using a soldering iron. They will serve as a connector for the power supply. All elements are connected in series.
On final stage V battery compartment sticks are inserted. It is important to observe polarity here. The contacts are pressed against the contact group. The container remains open throughout the entire charging process of the device.
So we figured out how to do useful homemade products for the home with your own hands. Good luck in your endeavors!
A summer cottage is an area where you can give yourself the freedom to conduct numerous experiments and dream to your heart’s content. This manifests itself not only in interior design, but mainly in the design of a garden or vegetable garden. Inquisitive and inventive owners have long been no longer guided by expensive and standard methods for arranging their plots, since there are many alternative solutions in fact for all areas of activity.
There are several types of vertical beds that allow you to optimize the use of free space. Non-standard designs are a great opportunity to create interesting design garden, vegetable garden, summer cottage.
This type of beds is in most cases used for growing ornamental plants or herbs.
Materials for production:
The length of the drainpipes is adjusted in accordance with the wishes of the owner of the site. However, you should not make bulky beds, as they can complicate movement around the area.
Creating a bed
Stage 1. Create a container. To do this, take a drainpipe, cut it in half lengthwise and put special plugs on both sides.
Stage 2. We take the prepared metal holders and put them on the resulting frames for the beds.
Stage 3. We make holes in the pipe. They are made in those places where metal fasteners will be located.
Stage 4. We pass a cable or strong rope through the holes made.
Stage 5. Fix the cable/rope using fasteners.
Stage 6. Fill the resulting beds with expanded clay and soil.
Stage 7. Plant the plants in the beds.
Stage 8. We hang the pipes to the selected location. Sometimes a special wooden crossbar is installed for this purpose, or rather a structure in the shape of the letter “P”.
Step 9: Alternatively, a special design can be made for the pipes.
Important! A bed made of drainpipes is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four directions by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.
A bed made from a plastic bag is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.
Materials for production:
- durable polyethylene film;
- sewing machine;
- priming;
- seedling.
In order for the bed to be strong, it is recommended Special attention pay attention to thickness polyethylene film, which is in in this case will act as the “frame” of the structure. The minimum film thickness is 0.2 millimeters.
The process of creating a polyethylene bed
Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the bed being created. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the bed is twenty centimeters.
Step 2. Sew the rectangles together, leaving only the top part of the bag unconnected.
Step 3. We sew a handle to the future bed, the strength of which will allow it to withstand the weight of the bag filled with soil. It should also be taken into account that when watering the weight will increase.
Step 4. Fill the bag with fertilized soil.
Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary in order to plant seedlings in the garden.
Step 6. Plant seedlings.
Step 7. Regularly water the soil and add the necessary fertilizers.
With these simple steps you can get a cheap and useful garden bed.
An integral element of every summer cottage is a compost heap. This is the place where all sorts of events take place biochemical reactions, ensuring the creation of fertilizers.
To create fertilizers that will satisfy all the requirements placed on them, several key steps should be carefully considered: creating the container and directly correct production the compost itself. Let's talk about each of them in more detail.
Stage 1. Take eight support posts of the same length.
Stage 2. Treat the bottom of the wooden posts with motor oil or tar.
Stage 3. We dig the posts into the ground so that they are reliable and stable. If compost bin will be located next to the fence, then 4 posts (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.
Stage 4. Between each two adjacent posts we nail the crossbars so that we end up with three independent sections. Be sure to leave gaps that will serve as ventilation holes.
Stage 5. In two sections, we nail the boards horizontally to half the height of the pillars. In these places it is planned to create two small doors.
Stage 6. The remaining section will big door, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.
Stage 7. Install the covers. To do this, you can use one large solid board.
Stage 8. Install the pre-prepared doors.
Stage 9. We provide the doors with handles and latches.
Stage 10. We process the wood using special impregnations.
Stage 11. Paint the box in any color that suits your preferences.
Many gardeners mistakenly believe that any components can be dumped into a compost heap. In reality, to create the right biofertilizer, the “ingredients” must be carefully selected.
Among the required components compost heap the following components:
- peat;
- ash;
- needles;
- tree branches;
- leaves;
- hay or grass;
- wood ash;
- plant roots;
- raw vegetables and fruits, etc.
All elements are randomly mixed in a heap. To speed up chemical reactions It is recommended to cover the pile with a tarpaulin (this is especially true if there is no box).
Trips to the dacha with the family require the presence of entertainment elements on the site that will delight children. The most common way to keep young summer residents occupied is a swing.
Building a swing yourself is not an easy task, but it is quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build comfortable structures with a comfortable place to sit.
Structural components:
- two logs;
- strong rope.
Indicators:
- log diameter – 85 mm;
- log length – 700 mm;
- distance between ropes – 500 mm.
Making a swing
Stage 1. We stretch the ropes between the logs.
Stage 2. Wrap ropes around each log.
Stage 3. Let the ropes out.
Stage 4. Tighten the ropes to 3 knots.
Stage 5. Attach the swing to the tree.
Important: this swing is designed for only one person.
Garden path from scrap materials
There are several types of garden paths that you can easily make with your own hands.
Step 1. Remove the sidewall from the tire using a knife or saw.
Step 2. Cut the tires.
Step 3. Line the space with corrugated stripes.
Step 4. Paint the path with paint.
Step 5. Sprinkle with stone chips.
This economical option for those who don’t want to rack their brains and waste time on a full-fledged garden path. Tire paths are usually used for vegetable gardens, as they are easily laid in the ground.
Stage 1. Paint the corks in different colors.
Stage 2. Dig a small trench.
Stage 3. We drive in supports to strengthen the future path.
Stage 4. We construct the formwork using boards.
Stage 5. Install spacers along the edges of the trench.
Stage 6. Place crushed stone deep into the trench and compact it thoroughly.
Stage 7. Make a solution from sand, cement, glue and water.
Stage 8. Pour the solution into the trench.
Stage 9. Press in the plugs in random order. Smooth multi-colored stripes look interesting.
These are the simplest and quick ways make a garden path without purchasing expensive materials.
DIY tools
The expression “everything is useful on the farm” turns out to be more relevant when we're talking about about canisters. From this plastic container you can make a large quantity indispensable tools, which are actively used in the process of dacha work.
To make this tool we only need sharp knife and the container itself.
Stage 1. Cut off the bottom of the canister.
Stage 2. Mark a cut line for the scoop on the container so that the handle of the canister is the handle of the future tool.
Stage 3. Cut off excess material.
Due to these simple actions we get an excellent scoop with a comfortable handle.
Materials:
Manufacturing
Step 1. Wash the canister thoroughly so that no odor remains in it.
Stage 2. Cut the canister vertically into two parts.
Stage 3. We make a groove on the board using a woodworking machine.
Stage 4. Apply glue to the plywood and insert it into the bottom of the canister.
Stage 5. Paint the resulting shelf using a spray can.
Of course, this design will not withstand a lot of weight, but it is quite suitable for storage. small parts.
Materials:
- 40 cans;
- scissors;
- rope;
- paper;
- marker.
Stage 1. Pierce the top of the canisters with a knife.
Stage 2. Make a stencil from paper.
Stage 3. Apply it to the canister and outline it with a marker.
Stage 4. Cut out large holes using scissors.
Stage 5. We stack the prepared canisters in several rows, tying each row by hooking a rope under the handles of the containers.
Stage 6. We tie all the rows around the perimeter for greater strength.
Stage 7. If you plan to lean the cabinet against the wall, then drill it to the surface.
Stage 8. Place heavy objects - stones or bricks - in the bottom row.
The result is a fairly spacious and functional rack that will help get rid of the problem of storing many small parts.
Be resourceful and bold in implementing your ideas. Good luck!
Video – DIY crafts for a summer cottage
Video - We do it ourselves for the dacha
It's nice to see when a person made everything and other household items with my own hands. To simplify the process of cutting metal or sawing elements from wood, they build homemade machines and accessories for the home workshop. This solution saves not only time on manufacturing products, but also money on purchasing ready-made ones. Several practical and interesting options Let's look at it below.
DIY pipe bending machine
Read in the article
How to use homemade machines and tools for your home workshop
The use of homemade machines and devices for the home workshop is aimed at solving several problems:
- Simplifying the metal processing process. When creating household items, a metal cutter or press is often required.
- Improving wood processing. Even to build a small shed or make a wooden one, others are needed.
Buying a ready-made tool is quite expensive, so the use of homemade machines and devices for the garage is becoming more and more relevant every day. Among the most common options home tool highlight:
- carpentry workbench;
- device for quickly sharpening knives;
- device for sharpening metal drills;
- drilling machines;
- press;
- cutting disc machines.
Here are a few photos of do-it-yourself tools and devices from “homemade” people:
1 of 4
Practical DIY tool shelves
Before creating devices and with your own hands, determine the storage location of all devices, so that later you do not have to search throughout the workshop or where everything is. It’s not difficult to make a shelf for tools with your own hands; the main thing is to decide on its dimensions and material of manufacture.
The easiest way to make shelves is to assemble them from wood. Do not forget about the need to coat the finished structure with a protective varnish or to prevent rotting and swelling of the wood.
You can create combined option from a metal support and wooden shelves. Here detailed instructions to create such a homemade model:
| Image | Sequencing |
 | Assembling the frame. To do this, prepare two side frames consisting of 4 corners. Connect the elements using . Then, tighten the 2 frames together using 4 corners. |
 | When the frame is completely assembled, proceed to making the shelves. They can be made from wood or metal, as well as from other dense materials at hand. It is enough to cut the canvases of a suitable size and attach them to a metal base. |
 | If desired, you can make the rack movable by attaching four small wheels. Or install it firmly in a designated space in the garage. |
You can find others interesting projects and drawings for making tool shelves. Watch the video on the topic:
And also do it yourself useful devices for household:
1 of 4
We make a carpentry workbench with our own hands according to the drawings: video instructions and photo examples
Among the common do-it-yourself devices is a workbench. Durable and dimensional, allowing you to securely fasten the workpiece, useful for quality cutting wood and creations made from it various elements.
The device package includes:
- Working surface. Hard is used for it to increase the service life of the device. The thickness must be at least 6 cm.
- Supports. Collected from wooden beams or metal plates. The main task is to ensure the stability of the entire mechanism.
- Vise for securing the product. If the table is long, you can install two vices at once.
- Tool box. A useful recess or pull-out design that provides quick access to needed small parts.
To assemble a carpentry workbench for your workshop yourself, you should choose a drawing and purchase materials for the work.
DIY carpentry workbench drawings
Before purchasing materials to assemble your own workbench, you should think about a detailed drawing. It should include the dimensions of the machine itself; it is advisable to note the dimensions of the materials used and their quantity.
For example, finished drawing A DIY folding workbench may look like this:
Whatever model you choose to create, take into account several features of the workbench that ensure ease of cutting wood:
- height and length of the master’s arms: the height and width of the tabletop depend on these parameters;
- which hand is working: place the vice on the right or left;
- what blanks will be made: choosing the shape of the table;
- how much space in the room do you allocate for the workbench?
Taking into account all these parameters, it will be easier for you to decide on the drawings of the carpentry workbench and the dimensions of the machine. Here are a few interesting examples:
Instructions for assembling a wooden workbench with your own hands
You can buy a wooden workbench in a store or through online catalogs, but it’s cheaper to make it yourself. Let's take as a basis a simple option with standard sizes tabletops: length – 150-200 cm, width 70-120 cm.
The manufacturing work will include several stages:
| Image | What need to do |
 | Make the top cover from thick ones to make a shield with a width of 70 to 200 cm. Fasten the elements with long nails, and you need to drive them in with outside, and carefully bend the inner one. The working surface of the workbench is made only of wood or. |
 | Sheathe the lid along the lower perimeter with a 5 by 5 cm beam. This will make it more convenient to attach the vertical supports. The location of the supports depends on the size of the tabletop. It is better to make them from thick rectangular timber at least 120 by 120 mm. |
 | The carpentry workbench must be installed correctly. Be sure to secure it firmly. If it will be mounted outdoors under a canopy, dig holes for supports. Indoors, use other fastening methods. |
When the structure is assembled, install a vice on it. To fully understand how to assemble a carpentry workbench with your own hands, watch the video:
Making a carpenter's vice for a workbench with your own hands
Professional “homemade workers” assemble not only tables for work, but also vices with their own hands according to drawings. Any design of such a clamp will include several elements:
- Supports, where each one has a sponge for clamping.
- Moving jaw.
- Metal guides. The sponge moves over them.
- Lead screw for moving elements.
- Collar. Necessary for rotating the screw.
When making a homemade vice with your own hands, you can use various available materials. For example, there is a design option from profile pipe. To do this, prepare several pieces of pipe different sizes, steel stud with coarse thread and double nuts.
Instructions for creating a bench vise from a profile pipe:
| Image | What need to do |
 | The largest pipe acts as a body. Supports are soldered to it from below. A 3-4 mm steel flange is put on the back side. A hole is drilled in the center for the running nut, and opposite the front support is the rear jaw. |
 | There is a front steel flange on the internal moving part. A stud is mounted in it, with lock nuts attached to it. Thrust washers are placed on both sides of the flange. The last element is a movable tube attached to the front jaw. |
And also watch the video “do-it-yourself vice at home”:
DIY metal workbench drawings
A metal workbench does not differ much from a carpenter's workbench. The base is hard metal, not wooden frame. A vice is attached to it, and the entire workbench is designed to withstand the force of a sledgehammer.
Do-it-yourself metal workbenches can have one, two or three cabinets, and also not have shelves or drawers for small parts. In terms of strength for working in a garage, you can make a regular table made of metal up to 5 mm thick and a reinforced structure where sheets from 10 to 30 mm are applicable.
Here are some useful drawings for making metal workbench for your workshop:
How to make a device for sharpening knives with your own hands: drawings and photo examples
No home is complete without a knife in the kitchen. Correct without special devices it is quite difficult to do: it is necessary to comply desired angle and achieve perfect blade sharpness.
For each knife, a certain sharpening angle must be observed:
- A razor and scalpel require an angle of 10-15⁰.
- Cutting knife bakery products– 15-20⁰.
- Classic multifunctional knives – 25-30⁰.
- For hunting and hiking, take a device with a blade angle from 25 to 30⁰.
- If you want to cut hard materials, then sharpen at an angle of 30-40⁰.
To ensure the desired angle, it is worth buying or making a sharpening device. For example, you can assemble a sharpener with your own hands.
A comment
Tool selection specialist at VseInstruments.ru
Ask a Question“If you don’t use sharpening every day, then 1000 rpm is enough for a high-quality result and a long service life of the device.
"To assemble such a machine, you will need a motor from a washing machine with a power of 200 W. Completely for creating a sharpener from an engine from the Progress of work on creating such simple device will be as follows:
- Sand the wood blocks sandpaper, removing burrs. Make markings depending on the desired angle.
- Attach a stone to the drawn line to give the blade a sharp edge. To do this, attach it to the block and mark its width. Then, make cuts on the markings, up to 1.5 cm deep.
- Attach abrasive stones to the resulting recesses so that the grooves coincide. Then, install the sharpening stone by screwing it onto the bolts.
There are many ways to make a homemade knife sharpener. Choose the one that suits you and try to create a convenient and useful tool for home.
How to make a device for sharpening a metal drill with your own hands
They make their own not only a sharpener for blades, but also a machine for drill sharpening on metal. Here are a few drawings useful for work:
Ready home machine The simplest and most common version of such equipment for a garage is a converted drill. To work you will need: - base frame;
- rotation mechanism;
- vertical stand.
For the rack, they usually use either boards. The drill is lightweight, so there is no need to use metal. In this case, the frame must be made massive in order to reduce vibrations during operation of the device.
To correctly connect the bed and vertical stand, as well as assemble all the equipment into one whole machine, pay attention to the video instructions:
DIY drawings with dimensions for a drilling machine
To correctly make any machine or practical device for private use, you should first make a drawing with dimensions. Only then begin preparing materials and assembling the device.
Here are some examples of do-it-yourself drilling machine drawings from a drill:
You can also do homemade vice For drilling machine. Below is a video instruction for assembling such a device:
Article
