PVC lathing for PVC plastic panels: photos and videos. We make lathing for plastic panels Lathing for PVC wall panels

A finishing material that is very popular today is plastic panels. They have found their wide application and help create modern decor in different rooms. Such material is often used in educational institutions, private apartments, trading floors, on loggias and balconies.

Peculiarities

Greater demand for PVC panels can be explained by the following qualitative characteristics:

• at an affordable price, which allows renovation work at low cost;
• ease of installation without the use of special equipment and tools;
• a variety of texture options, thanks to which you can create a unique interior;
• environmental safety;
• several size options and low weight;
• extremely resistant to fungus and moisture.

Plastic panels are durable material, but subject to their correct installation and careful care. Any mechanical impact can damage the finish.

Necessity

The lathing allows the installation of plastic panels in rooms with high humidity, constant temperature changes, or in those that are not heated at all. A special installation process prevents material deformation under the influence of factors environment.

The following types of fastening of PVC panels can be distinguished:

1. without a frame, but it is used infrequently and only on perfectly flat surfaces;
2. lathing or frame method.

Creating a frame for the subsequent installation of plastic panels is a guarantee of high-quality fixation of the material, regardless of whether the surface is flat or not. Before you begin installation, you should decide on the type of frame.

To do this, it is necessary to take into account the magnitude of the height differences on the surface that is being processed, the characteristics of the humidity level in the room, your skills and material security. The purlin is an important part design, thanks to it installation is easy and without special costs to level the surface. This fastening option will allow you to install the panels in any type of room and microclimate, where it will last for many years.

Materials

The manufacture of the frame can be based on metal slats, wood beams or plastic slats.

Made of wood

Wooden slats are an inexpensive and readily available material for making a frame. Features of use of this material is that it should not be used in rooms with high humidity. The choice of slats should be responsible and thoughtful. The bars should not be bent, crooked or poorly dried. The advantages of using wooden sheathing include its ease of processing, as well as its low cost. But it also has significant disadvantages, for example, a tendency to be damaged by rodents, rotting and low fire safety. That is why this material should be treated with special substances immediately before installation. If the mounting surface has differences in height, then this frame option will be the most suitable.

Wooden beams are quite easy to process, so if necessary, they can be easily adjusted to the desired size. The low weight does not cause overload on the walls, so it is applicable in rooms for various purposes. But also important is the absolute naturalness of the material and the inability to cause allergic reactions.

Made of metal

The metal profile is a reliable and durable frame. This option can be installed in rooms with any humidity, regardless of temperature regime. The main advantage of such lathing is the ability to use it on any surface, with any curvatures and height differences. Recently, molding has become popular. Thanks to metal structures, you can safely install built-in lighting equipment into the walls.

These profiles also have significant disadvantages:

• installation will require special skills;
• the process is difficult and time-consuming;
• quite high cost;
• high consumption of materials.

Installation of a metal frame under PVC panels guarantees fire safety, as well as a long service life, unlike other materials. Compared to wood, metal sheathing retains its geometric and linear parameters for a long time, is not subject to deformation under the influence of the environment, does not rot, does not rust, and does not require processing. by special means protection.

Made of plastic

This type of lathing can be used in rooms with the most different levels humidity. Any craftsman can easily create such a design. As for the cost, it is not too expensive. Each element of such a frame is small in thickness and can be installed in rooms with low ceilings. This is an excellent lathing option, but it is not always available in stores. The plastic structure is fixed on surfaces that do not have irregularities or curvatures, or they are insignificant. In the presence of severe defects good result it won't work.

The advantages of plastic include:

• inability to deform;
• resistance to the spread of mold and mildew;
• Possibility of quick and easy installation.

The main disadvantages include susceptibility to defects on the surface, as well as the price, which will be higher than in the version with wood.

Preparatory work

The preparation stage is present in any work. In some cases, repairs and decoration require many activities, in other situations only minor corrections are needed. The work begins with thinking about all the sequential actions, counting the number required material and its procurement. When the process of purchasing plastic panels occurs, it is better to purchase everything required amount immediately, since the products must be from the same batch. Otherwise, a situation may arise when it will be difficult to find a suitable product that matches the tone. It is also better to buy material with a small supply in order to make a quick replacement if necessary.

The process of preparing for the installation of sheathing includes not only the purchase of material, but also the preparation of the necessary tools. This is important so as not to prolong the work and not look for equipment during the process.

In such a procedure it is difficult to do without the following items:

• drills, screwdrivers;
• jigsaw;
• construction knife;
• level;
• roulette;
• hammer;
• pencil;
• consumables;
• screws, dowels, clips.

To build a correct and stable sheathing, you need to put in a lot of effort and invest money.

Some tips that will contribute to an excellent outcome of the process.

1. It is necessary to maintain the distance between the slats, it is advisable to keep them the same. The most suitable distance is considered to be 30 cm, but 50 is acceptable.
2. Installation of frame slats should be done perpendicular to future plastic panels. The vertical panel is attached to the horizontal slats and vice versa.
3. Due attention should be paid to the placement of strips at the beginning and end of the surfaces where work takes place. Openings for windows and doors do not need to be ignored.

If installation occurs wooden frame, then a mandatory indicator that is controlled is the humidity in the room and the material itself; for wood it should be no more than 15 percent. The basic rule that must be followed during the installation of plastic sheathing is to install the plastic strips perpendicular to the PVC panels, only in this way will it be possible to secure the clip.

As for the metal frame, its installation will be much more profitable, if gypsum plasterboard slabs are installed in parallel with it, thus there is a significant saving in material due to the use of scraps. It is important to remember that only with properly executed lathing will you get a reliable structure with a long useful life.

Installation features

This work process is the most important, so it should be taken with full responsibility. The final result will depend on the correct installation of the sheathing. It is worth starting marking the perimeter from the area that sticks out the most; it will become the basis for an even finishing panel layer. Using chalk, tape measure, slats, it is worth drawing the contours along which the frame will be installed. If slats are mounted, then it is used electric drill and level. The elements are fastened to each other and to the wall using screws and dowels. The space that is formed between the wall and the sheathing is filled with insulation. They are able to retain heat in rooms and additionally soundproof.

Wooden sheathing for PVC panels is done as follows:

• the timber is treated with antiseptics;
• slats are fastened along the perimeter of the surface, forming a square or rectangular closed perimeter;
• guides are fixed;
• jumpers are installed;
• The panels are installed using self-tapping screws.

Stages of performing plastic sheathing:

• markings in increments of at least forty centimeters;
• fastening plastic elements using dowels;
• installation of plastic panels using clips that are inserted into special connectors.

Plastic lining is used for both internal and external finishing work. Recently, the material has begun to go out of fashion due to the emergence of new finishing options. However, a wide range, availability and low cost leave it quite in demand.

Distinctive feature lining is simple and easy to install, which can be easily handled by one person, even if he is doing it for the first time. To create a sheathing, you need a hammer drill, a screwdriver level, a foam gun, an angle grinder, a silicone gun or liquid nails, construction stapler, molar knife, corner, tape measure and pencil.

Types of panels

By appearance panels are divided into three types.

• Seamless– products, standard sizes which are 250-350 mm wide and 3000-2700 mm long. They form a beautiful cast surface. The thickness of the products varies from 8 mm to 10 mm. Panel options differ in the method of applying paint to work surface and, accordingly, in price. All of them are easy to clean with soapy water. Laminated panels are resistant to mechanical stress and do not fade in the sun.

• Curly– products whose edges are shaped, which gives the assembled surface the appearance of a lining. The width of such models is most often 100 mm, less often – 153 mm. They have a single color, usually white (matte or glossy) or beige. The panels have a lattice structure with air cavities, which can also vary in density and thickness.
• Ceiling- an easier option. Such panels have a thickness of 5 mm. They wrinkle easily by hand and are the cheapest. They must be installed and operated very carefully. It is recommended to use this material only in places protected from physical and mechanical impact.

Installation

There are only two installation methods for PVC panels:

• directly onto the base plane;
• using lathing.

To install panels without using sheathing, you need flat plane bases with the smallest differences. Suitable glass brickwork, concrete, OSB boards, plywood, plasterboard, paving surface. For fastening, silicone, liquid nails, and polyurethane foam are used.

If it is not possible to obtain such fasteners, you can glue the panels onto hot bitumen or oil paint, mixed with sand or cement. They are applied to the base dotted or zigzag, gradually assembling the slabs and pressing them. If necessary, spacers are used. Fastening to a wooden or wood-containing surface is done in the classical way - using nails with wide heads, self-tapping screws or a construction stapler.

Installing panels on uneven surfaces is a more labor-intensive process. For this you need a sheathing.

It can be made from:

• plastic guides;
• wooden blocks or slats;
• metal profiles.

The uniformity of the material used during construction gives many advantages. Therefore, it is best to use special plastic guides. They are durable, lightweight and do not require additional processing because they do not rot. They also have special fasteners for panels (clips), which simplifies installation.

Fasteners are made directly to the base plane, starting from the most convex point. This frame needs more careful assembly. The guides must be mounted strictly parallel to each other. Only in this case will the clips fully fulfill the role of fasteners. The first plastic panel is installed strictly at an angle of 90 degrees relative to the sheathing. Installation is a little more complicated because the elements bend easily, so achieving an ideal plane can be difficult.

For fastening to the plane, not simple 6/60 dowels are used, but anchor bolts. It is best to work together, this applies even to masters. The cavity inside the guides is used for wiring electric cable. Sockets and switches are made overhead, lighting– external. Other types of installation of electrical accessories require additional preparatory work with base.

Most often, inexpensive and accessible wooden sheathing is used. The material for its manufacture can be slats or timber. They are pre-treated with an antiseptic drug against fungus and mold. If necessary, fireproof impregnation can be done.

It is worth considering that a plane assembled from PVC panels does not breathe, and such sheathing needs to be ventilated. To do this, cuts are made in the bars if they are mounted close to the base. The slats can be attached with small gaps. Decorative ones won't hurt plastic gratings. If there is a hood (as, for example, in a bathroom, toilet, loggia or kitchen), then the built-in fan can become a good helper in maintaining the desired climate.

The frame for the panels is mounted on dowels and leveled using pads at the place of its attachment. The distance between the frame guides is chosen arbitrarily; a step of 30 cm is sufficient. If there is a shortage or saving of material, the distance can be increased to 50 cm. For a high-quality result of installing the panels, the wooden components of the sheathing must be even and smooth. However, they are hidden behind the front covering, so using first-class blanks for these purposes is very wasteful. IN in this case A semi-edged board or used board (for example, old trim or even baseboards) is suitable.

The frame is assembled around the perimeter. They go around the door and window openings, technical holes. In corners where two planes meet, perpendicularity must be maintained.

The next component of the sheathing and at the same time front trim is additional plastic fittings. Geometrically, space is three-dimensional. Therefore, only three planes can meet in one corner. For a uniform transition between planes and to hide gaps, there are various plastic profiles. The starting strip borders a single plane around the perimeter; the ceiling plinth is also used for the same purpose.

The connecting profile is used to distinguish between two panels of different types or colors in one plane or building them up. To meet two planes, strips are designed in the form of an internal and external corner. An F-shaped strip is used to end the plane of panels and hide the technical space between it and the base of the wall.

The profiles are attached to the corners and around the perimeter of the frame in the classical way. After this, the panel is cut 3-4 mm less than the measured distance. This must be done, otherwise the plastic fittings will “swell.” Then the panel is inserted into the grooves of the profiles. Secure it to the rest of the guides. The distance on the panel is marked using a corner, and cut with a hacksaw with a metal blade or a jigsaw with the same blade. Plastic can also be cut easily and quickly with a grinder, but it should be taken into account that this process generates a lot of construction dust.

Molding

You can refuse to use plastic fittings, and use molding to seal the seams. Using molding made from various materials(wood, foam plastic) on PVC panels is irrational, because it will require additional processing (painting, varnishing). It is best to glue shaped strips, that is, molding made of the same PVC material.

The element can be attached using special glue, which you will be offered when purchasing molding in a store, as well as liquid nails or super glue such as “Moment”. There are PVC corners of different sizes, which are just as easily glued to the panels. There is less hassle with this type of finishing, and the process itself takes less time, but after this it is impossible to disassemble the panels without damaging them.

Metallic profile

For very uneven surfaces, to create a multi-level plane or a plane with different angles of inclination, for application various types built-in lamps, as well as to create an exhaust duct, metal profiles are used, mainly used for installing drywall. This frame weighs more and requires more for installation. special components. But it is reliable, does not require special care, and is perfect for both interior and exterior work.

The frame is assembled as easily as a Lego set., only during assembly you will have to perform more various manipulations (trimming, measuring, tightening, bending). However, there are no difficulties here. A person who has assembled such a frame at least once can cope with this task very quickly.

This version of the sheathing makes it possible to use insulation, which at the same time acts as a sound insulator. Possible option interior partition. At the same time, the W-shaped aluminum guide (also called ceiling) is strengthened wooden beam 40/50 mm. Such strengthening is necessary to create doorway. If desired, you can strengthen the entire frame, but this is not necessary.

Such racks are attached to the ceiling and floor using reinforced or simple metal corners, tightened with self-tapping screws. The cross members are attached in the same way and can be reinforced in the same way. Their number depends on how the PVC panel will be mounted - vertically or horizontally.

The sheathing is attached to the wall or ceiling in the standard way. A U-shaped guide is mounted around the perimeter at the planned distance from the base. If the area of ​​the surface to be covered is small (about one meter wide), then an W-shaped profile is inserted into it and tightened with a screw (nine with or without a drill).

Method of installing polyvinyl chloride panels (PVC) on the sheathing does not require special skills or a long time, and when performing it, you do not have to move the weight of furniture from the room - this is the most the best option, which does not cause unnecessary inconvenience. Due to the ease of implementation, the process of installing PVC panels on the sheathing can be carried out yourself, without special effort. Especially if you choose the wooden lathing method.

The advantage of installing PVC on wooden base is that before finishing the PVC coating no leveling and preliminary preparation walls and ceiling. This coating fastening technology allows you to lay an additional base between the panels and the surface of the wall/ceiling - heat and sound insulation. In addition, when self-repair You can safely implement interior ideas using various shapes and graphics of PVC panels, and without spending money on the services of a specialist, who can be quite more expensive compared to the expected calculation.

Necessary materials for do-it-yourself wooden sheathing:

• Dowel-nails(for reinforced concrete, brick walls and on other solid bases);
• Self-tapping screws, nails or staples(on a wooden surface);
• Beam-ray(to create a base grid on the surface of a wall or ceiling);
• PVC panels(installed on the lathing structure vertically or horizontally);
• External and internal corners(finishing profiles, according to the perimeters of walls and ceilings, window and door openings);
• Connecting profiles(H-profile guide components are attached to the slats, panels are applied to them at both ends along the length);
• Initial profile(edging, end L and P - profiles, unique for hiding the short sides of profiles when finishing walls, ceilings, windows and doorways)
• Final profile(F-profile, hides the cavity between the wall and the panel);
• Skirting fillets(according to the perimeter of the floor and ceiling).

Tools for wood sheathing under plastic (PVC) panels:

- Hammer;

— Gun for fixing staples, if staples are available;

— Drill, pencil, level, tape measure.

Plastic can be cut using a grinder, a hacksaw, a construction knife or a jigsaw.

Preparatory work. How to determine material consumption?

Determining the required number of panels and slats is not a difficult task, you just need to take careful measurements.

To find out how many PVC panels you will need to lay a wall or ceiling, you should measure the surface in the direction in which they will be laid PVC coating. It should be taken into account that the slats under the sheathing will be perpendicular to the panels - vertically or horizontally.

The optimal direction for installation is selected based on the perimeter of the room, as well as aesthetic preferences. It should be noted that depending on the direction of the line of panels, finishing can have a better or worse effect on the visual parameters of the space: finishing stripes along the height of the wall will significantly lengthen the room, and along the length of the wall will significantly shorten it.

If the installation of panels will be carried out along the height of the wall, then the distances between the floor and ceiling should be measured.

And if the PVC installation will be carried out along the length of the walls, then you should measure the length of the wall, while pulling a tape measure from one corner of the wall to another corner, including the total length of the walls of the room along which the PVC coverings will be laid. After the process of measuring the dimensions of the walls and ceilings, it will become clear in what volume you need to buy material for the total area being repaired, as well as the number of guide devices that are used to attach the panels to the lath.

Now you need to take measurements of external and internal corners, joints, window and door openings. Thus, the amount of necessary finishing materials is determined - corners, skirting boards, etc.

How to properly purchase and use PVC?

When selecting and purchasing panels, you need to divide the total length of the walls by the width of the 1st panel. The result will be the number of plastic panels required for installation. It is worth taking into account the plus and minus cases when performing finishing and arming yourself with several spare panels. Select complementary materials to the panels according to the dimensions obtained. After purchase pvc materials, it is not recommended to unpack them immediately and use them; let them lie for a day in the room where installation will be carried out. This is done for acclimatization, preparing the material for the conditions of the room. During unpacking, the panels should be laid out carefully so as not to damage the decorative layer of the panels.

Do-it-yourself PVC panel installation technology.

Installation of PVC panels begins with the installation of sheathing beams on the wall and ceiling, on which the plastic panels will be fixed.

Slats in sizes 20x30, 30x40, 30x50, 50x50 mm, but not less than 20x20, are suitable as beams for sheathing.

At high humidity air and walls in the room being repaired, it is recommended to treat wooden slats antifungal agent or similar impregnation, self-tapping screws should also be selected from moisture-resistant metals, for example galvanized. Typically, in high humid conditions, they prefer to replace wooden structure with galvanized profiles.

Marking walls and ceilings. The sheathing slats should be perpendicular to the direction of installation of the panels. The distance between the slats (≡) should be at least 40-50 cm, on the ceiling 30-40 cm.

How and with what to fasten the bars? Before attaching the slats to the wall or ceiling, it is necessary to align its location using a level or plumb line. The bars are secured to the concrete surface with dowel nails with a diameter of 6 mm and a length of 60...100 mm, depending on the base. To ensure a secure fit of the plastic to the sheathing, it is recommended to drill holes on the slats under the dowel-nails. If the surface is wooden, then the slats can be secured using long wood screws. In places where it is planned to install attachments or decorative elements, it is also necessary to attach wooden slats to prevent tension in the panels.

Where and when to install guide profiles? Profiles – plastic guides – “L” - shaped structure (“elka” - on the cut they resemble the English letter “L”), as well as “P” - shaped initial profile are attached to the prepared sheathing on the wall or ceiling, in front of the immediate PVC fastening panels. The profile can be attached to wooden sheathing construction stapler, clips, nails or self-tapping screws.

If the height of the wall is greater than the length of the panel, then to join the plastic you need to use connectors that resemble the English letter “H” (“ashki”). When finishing a room in a circular manner, at the corners of the room, internal corner plastic guides must be attached to the sheathing. When finishing a ceiling or wall, the resulting cavity between the panel and the surface is hidden using the final element “F” - profile.

How to correctly install PVC panels with your own hands step by step?

1. According to the rule, laying PVC wall panels should begin in the direction from the corner of the room towards door, window and other openings.
2. The first panel must be inserted into the groove of the previously fixed corner - narrow shelf. Then check the location of the panel - it should be positioned perfectly evenly in relation to the corner of the surface to be finished; do this using a plumb line or level.
3. Attach the wide panel shelf to the sheathing with staples.
4. Insert the second panel with a narrow shelf into the groove of the already secured first panel. Then carefully check that the first panel leading from the corner fits tightly to the finishing profile, and the second panel should fit tightly to the first panel.
5. Then, using a stapler, fix the fastening shelf to the sheathing.
6. The third and subsequent panels should be mounted in the same way.
7. It is recommended to partially reduce the last panel, on the side of the wide shelf, by 6-8 mm compared to the center of the fastening profile.
8. Insert the shortened panel into the groove of the fastener and then insert it into the groove of the adjacent corner panel. This way you can install it tightly and securely last panel PVC, as a result of which no additional fastening is required. Do this carefully and carefully so as not to damage the corner guide.
9. The final stage of the process of installing PVC panels yourself is installation end strips and skirting boards that are specifically designed to work with plastic panels.

Calculation mounting profiles for plastic panels:

Mounting profiles or guide angles Sold individually, the length of one piece is 3 meters.

Calculation of internal and external corners. To determine the number of external and external corners required for installation internal version you need to measure separately the height of all internal and external corners finished area. Divide the resulting dimensions by 3 m - the length of one profile piece.

Calculation of window and door openings. To determine how many meters it will take for door and window openings, measure all the limits of the window traditional way in width and height, and measure doorways “U” figuratively - on 3 sides, not counting the lower area of ​​the door. After that, the resulting sum of the perimeters of windows and doors must be divided by 3 m. The final number should be added to the length of the outer corners. Round the numbers to a large integer to obtain the required number of corners in pieces.

Calculation of the number of fillets. To find out how many fillets are needed to install the panels, you need to find the sum of the ceiling dimensions. Do it this way: measure the perimeter of the ceiling, divide the result by 3, round the number to a larger integer.

Calculation of corners ceiling plinth . If the number of external and inner corners ceiling plinth, then it is enough to compare the resulting amount with the number of internal and external corners of the room, they must match.

Calculation of the number of starting profiles. To obtain the number of starting corners for installing panels, measure the height of the corners where installation begins, divide the resulting number by 3, round to the nearest integer.

Calculation of fasteners for mounting plastic panels:

Consumption of dowel-nails for the installation of wall/ceiling panels, the standard is 1 piece for every 0.5 m of beams.

Consumption of nails, self-tapping screws, screws and staples. Multiply the number of plastic panels and guide profiles by the number of rows of timber. For example, let’s find the required number of screws if the number of rows is:

Profiles – 2

Panels – 12

14x6=84 (where 14 is the sum of the multiplication of the numbers of profiles and panels, 6 is a row of slats, 84 is the number of necessary screws).

Like

Already for a long time plastic panels are deservedly popular. Of course, there are more on the market modern materials, but each product always finds its buyer. Moreover, the panels can be found not only in residential premises, but also in various retail and office establishments. But this type the material requires compliance with certain installation methods. For this purpose, lathing under PVC panels is most often used.

Just ten years ago, PVC panels could be found in literally every house or apartment. Yes, lately interest in them has decreased a little, but they are still in great demand. What explains this? And the fact that they have many advantages.

Advantages of plastic panels:

• Affordable price. This is undoubtedly a big plus in their favor. Finishing the premises will not require significant financial costs.
• Easy to install. There is no need to hire craftsmen; all work is done independently. You also do not need to use special tools.
• Variety of textures. Everyone can choose for themselves best option, which is suitable for the interior of the room.
• Environmental friendliness. Modern technologies allow the production of PVC panels that meet all safety and fire resistance standards.
• Light weight and several size options. This makes it possible to quickly work with this material and cover large spaces with it.
• Resistant to fungi and moisture. Allows you to use them in bathrooms and shower rooms.

On a note! If you really wish, you can order products on which the selected drawing or photograph will be applied.

Mounting methods

The panels are very durable, but require careful handling. Any mechanical impacts can lead to their damage. This must be taken into account when transporting and installing them. There are two main and available types of panel fastening. Less commonly used frameless method. It is used only when the surface is sufficiently flat.

The most commonly used method is lathing for PVC panels. Namely, a frame is created on which it is attached finishing material. The following varieties are distinguished, which differ from the material used:

1. Frame made of wooden blocks and slats. This method Great for rooms made of wood.
2. Application plastic profiles. It's pretty convenient way, which is suitable for almost all types of structures.
3. Metallic profile. The same design is used that is found when working with sheets of drywall. It is very convenient when you need to carry out work on surfaces that have significant flaws.

Preparation

This stage is present for any finishing works. Somewhere, significant measures are required or limited to minor corrections. In any case, it all starts with drawing up a work plan, counting materials and purchasing them.

Advice! When purchasing plastic panels, it is better to purchase all the material at once in order to get products from one batch. Otherwise, there is a high probability of running into different colors. You should also take into account the required margin, which is 5-10%. This will help replace parts in case of damage or defect.

To carry out all the work you will need simple tools. It is better to prepare them in advance. It is a very unpleasant situation when it turns out that everything is ready, but the work cannot be carried out due to the lack of drills the right size. And also all consumables must be at least two copies.

Before installing the frame for PVC panels, you should stock up on additional fasteners and consumables.

So, let's prepare:

• drill (perforator), screwdriver;
• jigsaw;
• construction knife;
• level and tape measure;
• hammer, mallet;
• pencil;
• consumables (drills, bits);
• screws, dowels and clips.

It all starts with choosing the slats carefully. They must be intact and not have any damage. If you do not pay attention to this circumstance, it may happen that you will have to replace parts of the sheathing that have become unusable, and this is very difficult to do.

Installation of a wooden frame under plastic panels looks like this:

• The prepared timber is treated with an antiseptic. The fact is that this material is inferior in its properties to plastic and metal, that is, it is exposed to moisture and fungi.
• Now they are starting to build the structure. First, fix the slats around the perimeter of the wall. That is, the timber forms a closed square or rectangle (depending on the type of room).
• Next, they begin to secure the guides. Keep in mind that the distance between them should be no more than 30-45 cm.
• Now comes the turn of jumpers.
• The panels can be installed. Self-tapping screws are used for this. Take into account the required step - 35-40 cm.

Some tips:

1. Humidity in the room should be at normal levels, the moisture content of the timber should not exceed 15%.
2. All slats are installed using a level. If necessary, align the rail - make a spacer between the wall.
3. All sections of the sheathing must be securely fastened to the wall - through dowels, to each other - directly or using corners.

Plastic sheathing

This type of lathing has several advantages:

• it is not subject to deformation;
• very resistant to mold and fungi;
• makes it possible quite quickly.

There are also disadvantages. So, this material is quite susceptible to any surface imperfections. And also its cost is higher than that of wood.

The plastic sheathing is mounted as follows:

1. Make markings. Immediately take into account that the step should be 35-40 cm.
2. Plastic strips are secured using dowels.
3. Now you can install the panels. This is done using special clips that are inserted into a special connector on the strip.

This may seem like the simplest and most quick way. This is probably true, but this will only happen when the basic rule is followed - all plastic strips must be strictly perpendicular to the PVC panels. Only then will it be possible to secure the clips.

Metal sheathing

This type of lathing is performed when it is necessary to obtain a very reliable structure and there are significant surface imperfections. But this material has one significant drawback - its high price. It can significantly exceed even the price of plastic panels.

Technology for creating lathing for PVC panels metal profile is this:

• It is immediately worth noting that it literally repeats the construction of a frame for drywall. It all starts with the installation of a U-shaped profile. It is checked using a level. For fastening, dowels and screws are used.
• The guides are installed, they are attached to the wall and to the already installed profile.
• They make jumpers.
• Fasten the panels.

Metal sheathing usually used if the surface has significant differences and unevenness

On a note! Often metal carcass beneficial when gypsum board slabs are being installed in parallel. So, you can save a lot and take advantage of profile trims that will be used.

What to remember

1. Regardless of the choice of lathing, the distance between the slats should be from thirty to fifty centimeters.
2. The slats are attached perpendicular to the panels.
3. The structure around window and door openings must be reinforced.

Thus, it becomes clear that only properly executed lathing allows you to create a reliable and durable structure.