on Sep 13, 2018 1,331 Views
Often, when contacting support or calling a hotline, the subscriber is urged to switch to touch-tone dialing. As a rule, this happens when trying to call a multi-channel number, which requires pressing numbers on the handset of the phone to confirm the choice. It’s not difficult even for a beginner to understand such nuances.
Telephone communication is a complex thing, but at the same time incredibly interesting. For this reason, before switching the phone to tone mode, it is worth understanding its essence and considering what other dialing options are available. Telecommunication technologies are moving far ahead every year, and even now modern devices only support the tone type. For devices released earlier, you still have to switch between two:
Related articles How to choose a portable speaker How to restore a phone battery at home Grilles for the lawn
- pulse, which involves closing the telephone line in a special way, where each dialed digit corresponds to the number of pulses.
- tone, using an analog signal to dial the required combination of numbers.
A user who does not understand the intricacies of this topic will be able to distinguish these methods of entering numbers by ear. Remember the old rotary phones: when you scrolled the disk, you heard some clicks that differed depending on the number. Some devices released even 10-15 years ago still have the ability to switch to pulse mode. Another input method will give itself away as a difference in the pitch of the signal, which will depend on the key pressed. The advantage of tone digital input over pulse input lies primarily in the speed of dialing and connecting with the subscriber.
Tone mode on a landline phone
With the passage of time and the development of internal telephone networks, the abandonment of outdated pulse dialing seems quite logical. Multifunctional office phones, similar to those produced by Avaya, do not even have the ability to change modes. This is understandable, since in large companies work is constantly in full swing, and the speed of dialing to a client or partner is important.
Home devices will make you worry about how to enable tone mode on your phone. For example, the list of characteristics of the wired model of a Panasonic device states that both options are available. In some cases, pressing buttons is not enough to switch between them, and you should contact your communications service company for help. It is a mistake to believe that absolutely all radio telephones, unlike wired telephones, have only tone dialing. Voxtel Select series devices support both methods of transmitting a telephone number.
Tone mode on a mobile phone
It is more profitable to make calls to long-distance hotlines, where you have to listen to an answering machine for a long time, from a mobile phone. Most devices are equipped with only one input method, so the question of how to switch a cell phone to tone mode does not arise. To switch to the extension line of the desired operator, you will need to press keys with certain numbers, which is only possible with the tone option. A person dialing a call center number will hear a characteristic signal, indicating that communication has been established with the selected operator.
There has never been a pulse connection on mobile phones, since this is a feature of telephone networks for landline devices, and the modernization of Russian telephone exchanges has made it possible to abandon this option forever. However, it may not be necessary to switch between input methods, but to enable the desired type of connection that was disabled for some reason. Without activating this function, some devices will not allow you to dial a number.
How to put a mobile phone into tone mode
If we answer this question in general and in relation to each gadget, but there is only one answer - nothing! By default, all phones support and operate in tone mode and do not provide any other selection options. However, there are exceptions to the rules: you cannot transfer to another set, but you can simply turn off the existing tone set. This instruction explains how to switch to tone mode on a mobile phone with touch controls:
- Dial the phone number.
- Once the connection is established, bring up the on-screen keyboard.
- Press the star or plus key. For different gadget models, you may need to hold these buttons for a while.
This algorithm will also be effective for owners of push-button phone models. Here the situation is even somewhat simpler: you don’t need to open the keyboard on the screen. Having reached the dialed number and heard a request to turn on tone input, which was probably turned off, you only need to press and hold one of the keys (usually “star”, “pound” or “plus”) until a characteristic signal.
Switching a landline phone to tone mode
The internal structure of home communication devices, like telephone lines, determines the choice of mode change method. In most cases, this can be done without leaving the apartment or private house. How to put your phone into tone mode in the classic way is described in the following instructions:
- Pick up the phone if you have a corded one, or press the call key on your radiotelephone.
- Hold the star button for a second.
- Try pressing the number keys: if they make sounds that are different in tone, then everything is done correctly.
Another option is suitable only for some models:
- Inspect the tube from all sides for the location of additional levers on it.
- If you notice a switch with the Latin letters P and T, meaning pulse and tone dialing, then move the lever to the T position.
- You can check by pressing the number buttons.
Video: Tone mode
How to put your phone into tone mode - what is it? Switching to tone mode on the phone - high technology news on the site"
Reviews and articles about new products in the categories: auto, business and analytics, video games, gadgets, hardware, energy mysteries, sound and acoustics, game consoles, Internet, research, cameras, computers, space, medicine, multimedia, navigation, science, laptops , game reviews, weapons, dissenting opinions, peripherals, tablets, press releases, entertainment, advertising, robots, rumors, software, TVs, phones, technologies, this is interesting.
We collect everything that interests people close to science and technology, as well as those who receive the fruits of the first two in the form of useful devices and gadgets, here and post them in an accessible form. If you want to know how the Universe was formed or which smartphone will satisfy all your needs, come in and stay informed. Every day the most interesting reading appears on the site, news and stories from the world of the virtual network, technology, space, cars are collected and analyzed - everything that makes the planet rotate and the imagination work. All you have to do is start reading any of the articles, and it’s proven: you’ll become engrossed!
Many of us at least sometimes have to call multi-line phones to various hotlines. It’s easier to do this from a mobile phone, but sometimes more expensive, because the operator begins to read money from the beginning of the connection. First, you listen to an answering machine message that asks you to choose which specialist to connect with, and then in some cases you will have to spend more than one minute on the line waiting for the operator to respond. In this case, it is more profitable to use a landline device, but in this case you need to decide how to transfer the phone to
Phone operating modes
There are two options for telephone operation - pulse and tone. Talking over is possible if you turn on the tone mode. and PBXs support pulse dialing by default. Modern digital PBXs and more advanced telephone models are tone-on-tone. You can determine how your phone is configured by default by holding the handset to your ear and listening to the sounds it makes as you dial a number:
- On a phone set to pulse mode by default, you will hear characteristic clicks, the number of which corresponds to the dialed digit.
- In tone mode, a characteristic sound signal will be heard in the speaker.
If you heard the sounds described in the first case, to call the hotline you need to find out how to switch the phone to tone mode. However, it is worth noting that owners will not be able to do this without purchasing additional equipment.
How to find instructions for your telephone
First of all, when we need to learn a new function of something, we turn to the instructions. It comes complete with any equipment. In it you can find a lot of very useful tips, including how to switch your phone to tone mode. If the user manual is lost along with the box or was not there initially, you should use the tips offered later in our article.
The easiest way to put your phone into tone mode
Sometimes, for objective reasons, it is impossible to find a user manual, or it may contain only a technical description of the model, and the functions are described very poorly. In this case, use a simple and proven method of switching to tone mode.
Once you have dialed the number and are connected to the answering machine, press and hold the star (*) for a couple of seconds. Usually this is enough to immediately switch to the required mode. If the transition does not work, then you should try again. If the transition procedure is successful, you can enter any extension numbers. However, you will need to go through this procedure every time you call.
Tone mode and its features
Panasonic specialists thought about introducing tone mode in their devices before other companies. It is no secret that its spread everywhere remains only a matter of time; an increasing number of PBXs are using digital technologies, and organizations are creating multi-channel numbers for convenience. Before you put your Panasonic phone into tone mode, examine the device carefully. On some models you may see a "tone" key or a "pulse-tone" switch. The switch must be set to “tone” mode, and the key just needs to be pressed.
Modern radiotelephones of this brand are programmed by default for tone dialing mode, and most often there is no need to enter additional settings. If the program is broken, then using the instructions it is easy to fix it.
How to switch a Panasonic KX-TCD225RU 9 handset with base to tone mode) and received the best answer
Answer from Navigator[guru]
. KX-TCD225RU. KX-TCD215 ...Thank you
for the purchase of a new Panasonic digital cordless phone. Reference...
temporarily switch the dialing mode from pulse to tone. ..
link - -1k=32th page of instructionsSetting up the BASE 000Call optionsDialing modeTone....confirmation is required everywhere (RIGHT arrow)
Answer from Egor Gavrilenko[newbie]
Temporary tone set or permanent?
Temporary tone dialing (for
pulse dialing service subscribers)
If you need to access
touch-tone services (for example,
telephone banking service), you can
temporarily switch the dialing mode from
pulse to tone.
1 Make a call.
2 When prompted to enter your code or PIN
code, press (*) and then press
corresponding dial keys.
Note:
L Pulse dialing mode
is being restored
Just in case, the manual can be downloaded here:
You can also dig around here:
Answer from Ildar Babamuradov[guru]
If your PBX does not support tone mode, no matter how you turn it on, you will still hear pulse dialing clicks in the handset as if you were spinning a dial.
Answer from Maxim Bogdanov[newbie]
Group interception stopped working in one of the office phones; as it turned out, the problem was that the phone was in pulse mode.
Panasonic KX-TS2365RUW phone - by default the phone is in pulse dialing mode. I'm looking on the side for a lever to switch to tone mode. There is no lever. Pressing the star (tone) button switches to tone dialing only temporarily, and after hanging up the phone will go back to pulse by default.
To switch this phone to touch tone, you need to:
1. Press the PROGRAM button.
2. Press the MUTE button.
3. Press button 3.
4. To select "TONE" press the "1" button. To select "PULSE" press button "2".
5. Press the PROGRAM button.
In this case, you need to take into account that the phone must have batteries, otherwise the settings will not be saved and will be reset again after you hang up.
Instructions
Check that the tone is turned on mode Or you can press any button on the phone while the handset is off-hook. Your device may already be in mode e tone dialing. Listen to the sounds it makes when dialing. If these are short signals, it means mode really tonal. If you hear short clicks in the telephone handset, the dialing is pulsed. This means you may not be able to take advantage of some interactive features.
Transfer incoming calls to another phone number, never miss important calls! Client controlled - you determine where you want calls to be forwarded to. To deactivate call forwarding: Pick up the handset and listen for a dial tone.
- You will hear two “beeps” and a dial tone.
- Dial the phone number where you want to forward your calls.
- This can be a local, long distance or speed code.
- Call forwarding takes effect within 5 seconds.
- Call forwarding is deactivated within 5 seconds.
To switch some phones to mode Tone dialing is not enough to simply press a key. You need to hold it for 1-2 seconds. Try holding the "*" or "#" button for a while. Then look at the screen of your phone radio. The corresponding inscription should appear on it: “tone” or “t”. If the message does not appear, listen again to the sounds that the phone makes when you press the buttons. Some telephones have "tone" or "t" and "i" keys/switches. In such phones, just select the one you need mode(pulse/tone). Switches can be located on the side or bottom of the base/handset. There are many phones with individual way of switching to mode tone dialing. For example, sequential pressing of the keys "*" "-" or "-" "*" "-". Tonal mode included.
You can hang up at any time while listening to your messages, and your messages will not be deleted. Messages are only deleted if you manually delete them by pressing 7 during or after playing a message. To use our remote access numbers first, make sure you have your voicemail password set up.
To set up voicemail to email, call our support team. In the future, this will be available through your online customer portal. Answer: From the main voicemail menu, press 3 for Personal Options, then press 2 for Administrative Options. Finally, select option 1 to change your voicemail password.
If none of the combinations helped switch your radio phone to mode tone dialing, carefully study the menu of your device. In many, switching from one mode and on the other it happens in the handset settings. Open the menu, select the appropriate item (tone / pulse mode), click "ok". If none of the methods works for you, carefully read the instructions for your phone. Perhaps it is individual. In addition, incorrect handling may lead to undesirable changes in some functions.
- The maximum operating time of the mailbox is 20 minutes.
- Maximum number of messages - The maximum message length is 120 seconds.
- Seven days of message storage.
Question: How can I access my voicemail outside of my home?
If you don't have a phone with message waiting, a "stuttering" tone will appear when you pick up the phone. Saved messages are retained for seven days. Answer: Unfortunately, we do not yet offer voicemail to email for our landline telephone service. However, this feature is available with our digital phone service.
If you often have to dial a number that requires switching to tone mode, and you have a phone in which this action requires a complex sequence of button presses, then you can store the entire combination in memory. Then, to change the mode, you will only need to dial the number from the device’s memory, and this is much easier than remembering sequences or always keeping the instructions at hand.
Sources:
- tone dialing mode
For firmware radiotelephone you need to clearly define the purpose of such an action. Perhaps the radiotelephone began to malfunction during normal operation - it responds slowly to button presses, turns off spontaneously, and phone numbers are not saved. One of the reasons for updating the firmware may be a program change in order to receive updates, improve the operation of the phone by optimizing the operating parameters and its structure.
You will need
- Guide to flashing radiotelephone firmware.
Instructions
To flash the firmware for a Nokia phone, connect the phone to the computer and in the folder properties, find display hidden files, enable them and make them public.
Download the new version for your model from the company's website radiotelephone, create a new folder and extract all the files into it. The important thing is that the folder must be empty and not located in the saved files of the phone.
The NSU program will start flashing the firmware automatically, but you need to connect to the Internet, or you can use the phone itself as a modem. Based on the traffic, they are guided by the correctness of the download, it should be less than 1 MB; if the value is higher, then you need to cancel this action and try to download the update again.
Turn on the charger and run the program, click the “next” button, accept the terms of the license agreement. Now the download occurs, after it is completed the program will restart the phone. That's all, the phone is reflashed and ready to go.
note
For different operating systems, you need to copy the corresponding files.
Helpful advice
Entry rm-313 – needs to be changed according to your phone model. To download the firmware, you can use your phone as a modem; to do this, you need to set up access via the radiotelephone and register an access point in it.
Cell phone locking is used to protect the owner’s personal data in case of theft or loss of the mobile phone. You may also encounter operator locking of your phone, which will prevent you from using it on any network other than the original one. In each case there is a specific sequence of actions that must be taken.
Instructions
The SIM card is blocked due to entering the wrong PIN code three times. It is possible to remove the PIN code. To do this, you need to enter the pack code located on the SIM card packaging. Once you enter it, you will be prompted to enter a new PIN. If this attempt fails, contact your mobile operator. Request a replacement SIM card. This will require passport data and the physical presence of the owner of the phone number.
Operator locking of the phone is used to prevent the device from being used on a network other than the original one. In this case, when you turn on the phone with someone else's SIM card, a request for an unlock code appears. You can obtain this code by contacting the operator's representative office. Justify your request by saying that you want to use the phone while traveling, but do not want to overpay for roaming. Provide your phone's serial number as well as owner details for verification. Use the received code to remove the protection.
If your phone is locked with security codes and you don’t remember it, contact the representative office of the manufacturer of your device. You will need a firmware reset code or a reset code. Provide your phone serial number and enter the codes. Please note that using the firmware reset code will return the phone to its factory state, i.e. will erase all existing personal files. Using a reset code will allow you to keep the personal information saved on your mobile, but will return all settings to factory settings.
If the previous step failed, reflash the phone. Use sites such as allnokia.com or samsung-fun.ru to find programs and instructions for synchronization, as well as further updating the cellular firmware.
Video on the topic
Each of us has heard at least once “put your phone into touch tone mode.” And I was sure that to do this you need to press the “*” key. However, this manipulation is not equally effective for all phones.
You will need
telephone set
instructions for using the telephone
Sponsor of the placement P&G Articles on the topic "How to switch a radiotelephone to tone mode" How to calculate the power of the hood Why the Decembrist does not bloom How to replant a cactus
Instructions
You can check whether the tone mode is turned on by pressing any button on the phone while the handset is off-hook. Your device may already be in touch tone mode. Listen to the sounds it makes when dialing. If these are short signals, then the mode is really tone mode. If you hear short clicks in the telephone handset, the dialing is pulsed. This means you may not be able to take advantage of some interactive features.
To switch some phones to touch tone mode, you don't just need to press a key. You need to hold it for 1-2 seconds. Try holding the "*" or "#" button for a while. Then look at the screen of your phone radio. The corresponding inscription should appear on it: “tone” or “t”. If the message does not appear, listen again to the sounds that the phone makes when you press the buttons. Some telephones have "tone" or "t" and "i" keys/switches. In such phones, simply select the desired mode (pulse/tone). Switches can be located on the side or bottom of the base/handset. There are many phones with an individual way to switch to tone dialing mode. For example, sequential pressing of the keys "*" "-" or "-" "*" "-". Tone mode is enabled.
If none of the combinations helped switch your radio phone to tone dialing mode, carefully study the menu of your device. In many, switching from one mode to another occurs in the handset settings. Open the menu, select the appropriate item (tone/pulse mode), press "ok". If none of the methods works for you, carefully read the instructions for your phone. Perhaps it is individual. In addition, incorrect handling may lead to undesirable changes in some functions.
How simple
September 9, 2013A landline telephone (also called a home telephone) can operate in two provided dialing modes: pulse and tone. By default, home phones use pulse mode. However, sometimes situations arise when it is necessary to switch a landline telephone to tone dialing mode, for example, so that you can press keys to select number options that are listed to you by the service support service or some other automated system. Today's article will tell you, how to switch phone to panasonic tone mode.
Initially, you need to determine what mode your landline phone is currently operating in. If you hear certain clicks in the handset when dialing a number, this means that the device is operating in pulse mode. If tonal sounds are heard that have different pitches, then the phone is operating in tone mode.
There are models of landline telephones that have a certain special button that changes the current mode. Usually this button is called “TONE” or “TONE”. To put your Panasonic phone into tone mode, you need to use the “+” key. If you are using a Panasonic model mini automatic telephone exchange, then you should press the “*” key in succession, and then the “#” key. The “T” symbol should light up on the display of the landline system telephone.
How can I put my Panasonic phone into tone mode? models KX-TS2365RUW? By default, this machine operates in pulse dialing mode. First, look, there may be a special small lever on the side of the phone that switches the operating modes of the device. If you do not find such a lever, then use the button with an asterisk, that is, “*”. However, in this way you will switch your stationary device to tone mode only temporarily. As soon as you hang up, the device will return to the pulse operating mode of dialing telephone numbers, which is set by default.
So, to switch the phone to the panasonic tone mode of the KX-TS2365RUW model, you must perform the following steps:
A) First press the button called “PROGRAM”.
B) After that, press the button called “MUTE”.
B) then press the “three”, that is, the “3” key.
D) to select the tone mode (i.e. “TONE”), press “one”, that is, the “1” key. If you are interested in the pulse dialing mode (that is, “PULSE”), then press “two,” that is, the “2” key.
E) After that, press the “PROGRAM” button again.
Please note that the stationary device must have batteries, otherwise the settings you set will not be saved and will be deleted as soon as you hang up the phone.
Now, if you are asked,
