The manufacturer Geberit produces high-quality and reliable installations complete with toilets, making the bathroom more comfortable and convenient. At the same time, the appearance of the room, as evidenced by user reviews, is very advantageous. The fittings can be easily installed by following the installation instructions exactly.
Types and advantages of Geberit installation with toilet included
Installation systems with toilets are produced by many manufacturers. Their range is varied, but the best is Geberit. The company produces installations of 2 types: block and frame. The first is simple, but it is fixed only in niches of main walls. The frame installation includes steel frame and components: sewer outlets, fasteners. This design can also be angular.
The steel frame will allow you to secure the structure without placing a large load on the wall
The big advantage is that its installation is possible where it is not technically possible to install other structures. A special frame and half-meter studs allow installation even if there are pipes behind the toilet.
In addition, users like:
- Easy to install.
- Swiss quality and precision.
- Long warranty (10 years).
- Guaranteed availability of spare parts. When a hidden system model is discontinued, parts for it are retained for 25 years.
Attention! If there are no main walls in the bathroom, then it is possible to install only a frame installation.
Installation instructions
Geberit fittings are attached to the base of the toilet using a drain pipe connected to it at an angle of 90 degrees. This is proven reliable design. The set includes a flap that covers the joint and a decorative cuff for the pipe. Although internal mechanism and is located in the wall. Access to the drainage structure is possible through the flush panel.
Despite its external elegance, the design can withstand heavy weight
Installing a block installation
To install you will need the following tool:
- perforator;
- keys of the required sizes;
- marker.
Installation process consists of several steps:
Installation of frame installation
The technology for installing a toilet with a frame installation is as follows:
Tip: When connecting the drain tank, do not use a flexible hose. It is short-lived, and to replace it you will have to destroy the wall.
Reviews
There are usually no complaints about the quality of the Geberit installation complete with a toilet:
- Olga. An experienced specialist was invited to install the installation. Particularly delightful is the operation of the automatic drain. It feels like this technique is for humans.
- Igor. The Geberit installation is smart and reliable. Every little detail has been thought out.
- Andrey. It is not for nothing that Geberit is in the highest price category. I like everything, especially the design of the flush panel. The frame is powerful, the fittings are reliable.
Installations fit well into the interior of bathrooms
- Artem. I installed the Gebirit DuoFresh model. It is very good, it has an odor removal function - it is equipped with an exhaust fan with a filter, you can put in tablets.
- Marina. Impressions from the Gebirit installation are only positive. Water is drawn silently, the buttons do not stick. During the year of work there were no complaints.
- Vadim. I recommend Gebirit to my customers. The installation is reliable, even after a long time it does not change its geometry and does not fail. If you need to replace something inside, you do not need to disassemble the wall - the installation elements can be removed through the hole for the button.
The installation with the Gebirit wall-hung toilet looks elegant. It fits harmoniously into the design of the bathroom.
Geberit - installation: video
Geberit installations: photos
The Swiss company Geberit has been successfully manufacturing and selling various sanitary equipment for many years.
For example, the company produces components for flush tanks, supplying parts for various global concerns, as well as independently creating finished products.
Very popular Geberit system for toilets. High performance and reasonable cost make these devices very popular on the market.
More about fittings
Construction ( drain fittings Geberit), located in the toilet cistern, works when flushing occurs. The drainage mechanism consists of the following elements:
- A tank is a container in which water is stored. Water hose can be supplied either from below or from the side. As a rule, the volume of the tank is about 8-10 liters.
- The shut-off system is a mechanism responsible for filling the tank, as well as stopping the water supply when its level reaches a predetermined maximum.
- Drain system - works when a button is pressed or the button lever is raised - depending on design features execution.
Lever models are now being produced less and less - they are being replaced by modern push-button models, which are more convenient, look better and allow the use of flush modes. When you press the button (lever), a hole opens through which water from the tank enters the toilet bowl. The hole closes when the container is empty.
Almost always the system is offered as a kit, already assembled and ready for use. If it fails, it can be replaced separately.
It should be borne in mind that if Geberit was installed, then it must be replaced with the same one.
The drainage system consists of two main elements: a lever and a siphon. The latter is needed to prevent water leakage: it covers the drain hole. As a rule, the appearance of a siphon resembles a plunger.
The button lever activates the siphon, which rises and opens the drain.
Recently, an additional element has appeared that is connected to the button (as mentioned above). Pressing it activates the button lever, which raises the siphon.
Moreover, many models are equipped with double buttons - which allow you to empty the tank completely (when pressed fully) or partially (respectively, when pressed partially).
Product classification
One way to classify the drain mechanism is the material of manufacture. The most common are plastic and bronze. Such product options cope perfectly with the tasks assigned to them.
The use of such materials is relevant because they are neutral to corrosion under the influence of moisture (unlike metal structures).
Geberite is a high-quality plastic element, and in terms of strength characteristics, it is almost as good as bronze.
You can also classify the drain mechanism (tank) according to design features:
- push-button – modern solution: draining occurs by pressing a button (tank);
- pull-out (lever) - an outdated example when it is necessary to pull the lever rod up.
Installation (push-button options) is divided into types:
- full drain - when you press the button, the entire volume of the tank is drained;
- dual-mode use - the button is divided into two parts, which makes it possible to use only part of the volume of water in the tank: with the first press, water starts, and with the second, the supply to the tank stops.
In addition to the options considered, there is another modern solution - installation. This is a comprehensive system for hidden installation plumbing equipment.
Thanks to the special design, a number of advantages are formed:
- communications are aesthetically hidden;
- space is saved in the bathroom - which is very important considering that there is often very, very little space in them;
- plumbing fixtures - suspended;
- easy installation and adjustment of Geberit fittings.
The installation distinguishes between two types of installations:
- block - tank with fastening; implies fixation on the main wall, the elements are hidden in a niche, only the drain button and terminals for connecting communications are displayed;
- frame - allows installation on main walls, as well as on the tank or its partitions. Eat corner models: with mounting on two walls.
The block system costs less, but the frame system opens up more possibilities for use.
Frame fittings (installation) for Geberit toilets are produced in three types:
- universal;
- for installation on lightweight walls, for example, plasterboard;
- for fixing on load-bearing walls, for example, brick.
When it comes to Geberit installation systems, two main groups of devices can be distinguished:
- for sinks, urinals - a universal option for connecting plumbing equipment from different manufacturers;
- for wall-hung toilets - a flushing tank and a button.
Nuances of choice
You need to choose drain fittings based on the toilet model. After all, the solution must be constructive; differing models cannot be reconciled.
So, if you plan to use a classic toilet, then the appropriate drainage fittings should be selected. In this case, you can count on the reliability of products, the design of which has been tested over many years of operation.
If a more modern solution is used - installation, it is worth taking into account the specific conditions in which the installation and configuration of Geberit fittings and the system as a whole will take place.
In this case, you can use a device that allows you to control it contactlessly, only by approaching or moving away from the sensors.
An important factor when choosing is price. The cost of conventional Geberit fittings is around $25. As for installations, in this case, of course, the price will be slightly higher - about $200.
In fact, this criterion is the limiting factor when choosing suitable fittings, as well as all plumbing equipment.
Otherwise, installations outperform classic solutions on aesthetics, ergonomics, functionality and durability.
Nuances of installation (video)
Setting up the mechanism
A ready-made toilet offered in a store always comes with the operating mode of the fittings installed and configured. However, in some cases you may need to configure it yourself.
This can happen during replacement - installing an entire new unit or its individual parts.
There is nothing particularly complicated about this - so it is not necessary to call a plumber to carry out such work (and for such work he will need to pay at least $5-10).
Now, actually, to how exactly this work is done. First, let's look at how to properly adjust the valve height:
- The rod is disconnected from the overflow pipe.
- The latch holding the “glass” is pressed out.
- Stand - Moves up or down as needed.
Now let’s figure out the sequence in which the water level in the tank is adjusted:
- The position of the “glass” changes - it needs to be either raised or lowered. In this case, there must be at least 45 mm of distance from the top of the part to the top edge of the container.
- Overflow tube - installed above maximum level liquid, at least 20 mm higher. At the same time, it should be lower than the top of the rack - at least 70 mm.
If you need to adjust a partial drain (in push-button models), you need to move its float higher or lower (relative to the overflow tube). There is an example in the video below.
For the same procedure, only performed for complete drainage, you need to move the valve itself (relative to the “glass”) - an example in the video below.
This adjustment will change (up or down) the amount of water that will be flushed when you press the button.
The Geberit installation is used for hidden connection of wall-hung plumbing fixtures to the water supply, electricity, and sewage system of the house. The installation may contain a flush tank, pipes, fittings for connecting to the building's engineering systems, flush keys, and mixers for the nozzles of the bidet built into the toilet.
The installation system is a set of profiles rigidly connected to each other into a single frame structure with the ability to adjust the spatial position individual elements. The installation is used for mounting on it hanging sanitary ware, hidden connections to toilets, urinals, bidets, sinks, cold water and hot water communications, sewerage, electrics.
The Swiss manufacturer Geberit produces installations for fastening the following types of plumbing fixtures and fixtures:
- toilets and ;
- urinals, bidets;
- washbasins, drains, kitchen sinks;
- baths, shower systems;
- shower with drainage in the wall;
- supports, handrails for disabled people.
The frame structure is located at a certain distance from the wall or is mounted on an island and sheathed on the outside with sheet material. This allows you to hide pipes, cables, flexible hoses, and other elements of engineering systems inside it.
Users often have confusion with the name of Geberit installations. Correct name frame structure is considered Geberit Duofix. However, the manufacturer initially uses several options for its configuration. mounting elements for specific plumbing equipment. Therefore, other names of its products appear in the title. The marking of the frame structure is deciphered as follows:
In other words, in frame structures of installation systems, the distance between the vertical posts and horizontal cross members may vary. The frame can be reinforced with two side posts to secure handrails for people with disabilities.
Frame construction with handrail fastenings for disabled people. In free-standing installations, racks are usually reinforced additional elements. The flush tank key can extend to the front surface of the structure or be located on top or at the end.
All these factors influence the installation installation time, the labor intensity of the work, and the selling price of the frame structure set.
Installation of Geberit installation
The installation for the toilet is installed in a place prepared in advance for this purpose. No special tools or equipment are required. A minimum qualification of a home craftsman, a standard arsenal usually available to the average user, is sufficient.
Tools
Each Geberit installation kit is designed with low installation times in mind. To achieve this, the number of fasteners is reduced, standard hardware is used, traditional technologies. For the home handyman To install the installation yourself, you need the following tools:
- level – bubble or laser;
- tape measure – maximum 3 m;
- marker or construction pencil - any color visible on the surface of walls or flooring;
- hammer drill – hammer, drilling, impact drilling mode;
- set of heads or wrenches– 10 – 17 mm;
- screwdriver - cordless or corded;
- screwdrivers - Phillips, flat;
- hacksaw - a blade for metal or plastic.
Attention: At the rough finishing stage, you will need a stationery knife or a carpenter’s “jamb” knife for cutting sheet material, with which the tubular frame is sheathed. Holes for pipes in drywall can be cut with a knife or drilled with crowns.
Preparation
Before you buy a Geberit installation, you need to take into account the following nuances:
The main task of the installation is hidden wiring communications, so everything engineering systems must be located behind its tubular frame. That is, if there are pipes coming from an installation lined with gypsum plasterboard and tiled, there is no point in installing it.
Therefore, several options for implementing projects with installations are used:
Attention: Shut-off valves and water flow meters in 90% of cases are located near the toilet, for which the installation is used. Access to them is necessary, so it is necessary to leave space near the frame for an inspection hatch.
Frame structures are fixed at least at two points to the floor and at two points to the wall. This allows you to withstand 500 kg of operating load when using hanging plumbing.
Frame installation
In this example, the Geberit installation was integrated into a false gypsum board panel, reaching the height of the window sill.
The sequence of actions for transforming the interior is as follows:
- dismantling existing plumbing;
- dismantling of claddings of enclosing structures;
- assembly of the frame structure;
- the lower stop is installed at a height of 100 mm from the floor;
- adjusting the height of the structure - 1 m to the top mark on the right post of the installation;
- horizontal level adjustment;
- marking the fastening of the upper supports to the wall;
- marking the fastening of the lower stops;
- drilling blind holes for fasteners;
- the holes are filled with “liquid nails” to fix hardware;
Applying adhesive to the surface of the holes. - installation of polymer dowels in the holes;
Installation of plastic dowels. - reapplication adhesive composition;
Refill with glue. - installation of the frame structure at the site of operation;
Installation of the installation in place. - fastening stops with anchors in dowels;
Fixation of stops with anchors. - horizontal frame distance adjustment;
Correcting the vertical position of the frame. - installation of a 90° sewer outlet;
Installation of a pipe for connection to the sewer. - installation of studs for attaching the toilet and the upper pipe from the flush tank;
- connecting the flush tank to the cold water supply system;
Installation of corrugations from the water supply to the flush tank. - wiring of communications inside the flush tank;
Connecting hoses to the flushing system. - installation of a panel with flush keys;
At this point, the Geberit installation is considered complete.
The manufacturer has provided three options for connecting the flush tank to the water supply - on the right, on the top, on the left. The extension of the pipes to the outside is adjustable.
Sheathing
After installation, the Geberit installation is tested to ensure its functionality without a toilet. To do this, water is drawn into the tank, and at the same time the water level inside it is adjusted. Then a small, large, general (cascade) flush is carried out into a bucket of sufficient volume, depending on the modification of the tank.
Only after this can you decorate the installation:
- Galvanized profiles-racks are attached to the wall;
- the gypsum board sheet is attached to the frame and profiles with self-tapping screws;
The corrugated part of the pipes is cut to length, taking into account the thickness of the wall cladding (usually tiles + a layer of tile adhesive).
After finishing the walls with tiles, wallpaper, flexible stone, cork, panels, etc. facing materials The toilet is placed on the studs and secured with nuts and polymer washers.
This installation method ensures high maintainability of plumbing and cladding. However, if a water main breaks, you will have to dismantle the drywall in the emergency area.
Details about covering the installation with plasterboard.
Possible problems
When installing a Geberit installation, the following problems may arise due to the low qualifications of the building's builders, finishers, plumbers, and the home craftsman himself:
With a high cross, the installation is usually moved sideways from it to solve the problem:
By changing the bending angles, three bends can be used to connect the outlet pipe of the toilet with the opening of the sewer cross, almost at the same horizontal level. In this case, the design of the installation should be taken into account.
In the usual Geberit Duofix fastening system, the posts are single, the standard elbow with corrugation (black) can be rotated towards the crosspiece at any angle for joining with the other two bends of the considered option.
In a reinforced installation, two racks are used; the length of the standard outlet is not enough for rotation; it can only be mounted vertically.
The double frame of the reinforced installation does not allow turning the pipe. In this case, a 120 degree bend is used instead, as in the bottom picture.
When cutting standard pipes - diameter 40 mm for the cistern, 110 mm for the sewer, it should be taken into account that their length is different. The drain is located closer to the sewer outlet. Therefore, it is better to cut the elbows from the installation kit last - after covering with plasterboard and tiles, immediately before installing the toilet.
The plastic adjustment pins for fastening the button are also cut off after tiling the box.
This means that the DuoFix installation system from Geberit can be installed in-house. You should avoid mistakes and adhere to the instructions contained in each installation kit.
Geberit is a Swiss company producing sanitary ware made from high quality materials. The company was founded in 1874 and managed to establish itself in the Russian market. Geberit is a world leader in the production of pipes from HDPE, carbon steel, of stainless steel, metal-plastic and ceramics.
The products of this company are excellent saves water and electricity. The company has been servicing pipelines in Russia since 1995. The company produces piping systems and plumbing fixtures:
- Plumbing fixtures and sinks made of ceramics and porcelain;
- Bidet toilets that save money toilet paper;
- Siphons and flush cisterns made of strong and reliable materials;
- Various systems sewers.
Geberit systems
Popular types of installations for the bathroom and toilet are “Kombifix” and “Duofix”. "Kombifix" is easily mounted on solid walls. These systems are specially manufactured for installation on brick and concrete walls. installations are produced for bidets, washbasins, shower drains, urinals, and as components.
Geberit Combifix
Pre-assembly will allow you to install the kit in a matter of seconds. Installations of this model are reliable and will last throughout the warranty period. Already upon release, the complex comes with a set of factory parts.
Parts include filler segment, durable and durable materials for fastenings, drain pipe, elements that are used for sound insulation. The same elements are used to install AquaClean.
Washbasins, urinals, bidets and wall-hung toilets are installed with this program.
Mounting order:
- Fix the mounting block in the four places provided for fastening on the wall;
- Connect the product to pipes carrying water;
- Wall up and sand the mounting points of the kit;
- Secure the plumbing fixtures where the unit was secured and run the pipes to the toilet or bidet.
Geberit Duofix
This model is mounted on a sanitary surface. It is designed for wall-hung toilets. The standard set is up to 112 cm high, and together with the cistern 336 cm.
You can choose a kit of the width you want; this configuration will allow you to mount the product even in hard to reach place. Geberit Duofix was used in combination with an integrated 12 cm cistern in the DuoFresh model. In addition to this model, you will have to purchase a flush key “Sigma40”, as well as a mounting block that conducts electricity.
System characteristics and installation requirements
| Name | Installation height, m | Width, cm | Installation depth, cm | Installation method | Water volume, l | Application | Other characteristics | Price, rub |
| Mounting element for wall hung toilet Geberit Duofix 111.300.00.5 | 1.12 | 50 | 12 | To the wall or to the floor. | 6 and 3 | Installed in front of a solid wall or empty partition | Galvanized legs, infinitely adjustable 0-10 cm | 16 298.52 |
| Mounting element for wall-hung toilet Geberit Duofix 111.370.00.5 | 1.12 | 50 | 12 | To the wall or floor | 3 and 6 | Attached to the floor at a distance of 0-20 cm. | Has double flush thanks to the Stigma40 key | 15 311.88 |
| Mounting element for wall-hung toilet Geberit Kombifix 110.350.00.1 | 108 | — | 12 | Hidden installation on a solid wall | Adjustable flush volume | Concealed cistern designed for tool-free installation | Blue metal frame | 9 691 |
Advice! Such products are mass-produced, so there is no need to worry that you won’t find any parts during repairs, especially since the delivery set includes everything you need.
There are several modifications produced, and each has its own individual technical features, but the principle of their operation is the same. Their main difference is the type. It happens:
- block;
- framed
- The first type has one significant drawback, since it can only be mounted on capital or load-bearing walls. Do it in, located in the central part Houses or , impossible.
- The second type does not have this drawback, but has some reservations when securing it.
In addition, there are options that differ in appearance, which allow you to put toilet not against the wall, but in the corner.
It’s easy to find out which option is on sale: the block version does not have a sliding frame and consists exclusively of such components as:
- fittings;
- fasteners;
- decorative fittings.
Choose a mount depending on the place where you plan to install the plumbing.
Preparation
Before starting the main process, you need to prepare working space and acquire the appropriate tools. The following will be useful to you:
- perforator;
- with drills (including for concrete);
- building level;
- roulette;
- wrenches of the appropriate size;
- knife and grinder with attachments for cutting drywall;
- putty knife;
- marker.
From additional Supplies will come in handy:
- dowels installed in mounting holes;
- silicone sealant;
- polyurethane foam;
- screws for gypsum boards;
- finishing
If the procedure is carried out in a residential area, first of all you need to dismantle the old toilet seat and remove it.
The next step could be to move the sewer hole in accordance with the plan. This can be achieved using special devices– adapters made of plastic.
Note! This procedure will require dismantling the part.
To do this, the floor around the hole is deepened using a hammer drill and the adapter is fixed on it. Next, the free space around it is filled cement-sand mortar or self-leveling floor mixture. The next stage can be started after the solution has completely dried.
How to assemble a frame model for a wall-hung toilet?
- The frame on which it is attached is assembled from the component materials. tank. You can adjust the height, horizontal and vertical position using the included brackets and screws attached to the frame.
- The finished product will reach almost one and a half meters in height. In this case, its components will be at the following height from the floor level according to the standard:
- If non-standard plumbing fixtures are used, these values can be adjusted in the same way as the distance between the toilet seat lugs. To extend service life, professionals recommend replacing metal racks plastic if the appropriate size is available.
Note! Please note that between the floor and the assembly it is necessary to install technological gap at 2 cm.
- Next comes the installation of the product. This must be done with strict adherence to horizontals and verticals. If necessary, a level, plumb line and marker are used for this purpose, which mark mounting points and lines. According to them, the finished frame is screwed to floor covering in advance drilled holes with dowels installed in them.
Important! When drilling holes in the floor, remember that there may be communications or a heating system running inside it. In case of damage, the front repair work may triple.
- Do not forget that the height of the frame and compliance with the horizontal are varied with screws, and the quality of the workmanship is checked at the building level.
- Then you will need to connect the water supply using a flexible hose, and the corresponding complete fittings to the outlet from the sewer. If necessary, it can be replaced with a corrugated analogue, after which a final check for the tightness of the connections can be carried out.
- Finally, plug the holes and install the mounting pins.
How to assemble a block model?
The peculiarity of this type is its versatility. In most cases, it can be used for floor and wall hung toilets, however the installation will vary slightly.
- First, you will need to make markings, namely, mark the axis of symmetry and, in accordance with it, draw other points and lines. Their position and the required distance between them can be found in the complete instructions. According to the established marks, holes are drilled or punched with a hammer drill, and dowels are installed in them.
- Next, you need to fix the drain tank and connect it to the water supply using a hose.
- On final stage for a hanging toilet seat, you need to screw in the pins, and in the case of a floor-standing toilet, you need to make new marks on the so that you can subsequently drill them and fix the fastenings, having previously done the same procedure with the knee. To connect them, special fittings called a cuff are used.
On a note! You may also need to cap the bolts and connect the button if this was not done by the manufacturer.
