Plastic doors must be removed for maintenance 2 times a year in order to lubricate and adjust the driving mechanisms. Many people are interested in how to remove plastic door from hinges.
The need to remove plastic interior doors from their hinges arises infrequently. In many cases, minor repairs can be made without disassembling the structure.
Take off balcony door from loops is necessary in such situations:
- the fastenings are broken and require replacement - to adjust or replace any parts and fittings, you need to remove the door from its hinges;
- the premises are undergoing renovations - it is necessary to remove the glass unit to protect it from contamination or damage;
- if the passage is blocked - sometimes even in open position The PVC sheet prevents large objects and furniture from being carried through the door frame.
Rules for performing work
You need to remove the plastic balcony door if one of the hinges is broken, or door leaf needs renovation. You also need to remove the door to lubricate the fastenings with oil. You can replace faulty fasteners without any problems, since the design has high quality and mobility. Door mechanism It is enough to lubricate once a year. Thanks to this, the durability of the product increases.
It is necessary to remove the PVC entrance door leaf according to the rules. Input structure, unlike the balcony one, is equipped with reinforced fastenings and a mechanism that protects against burglary. It has a lot of weight, so in such cases it is better to work with an assistant. The metal-plastic product is equipped with 3 fasteners.
If you need to remove a metal-plastic entrance door, you should proceed according to the following plan:
- You need to use pliers and a screwdriver to disassemble all 3 boxes of hinged hinges. Caps should be removed decorative look, prying them off with a screwdriver.
- Press down the upper fastener and use pliers to pull the hinge pin out of the groove at the lower end.
- The next step is to perform the same actions with the middle mount.
- Then you need to lift the sash upward by 50 mm and tilt it in your direction. If the structure is heavy, then you can perform this step by sliding a lever under the sash.
- Rotate the structure so that the lower sash rotation lever comes into action. Then we carefully lift and remove the structure from the lower fastener.
After removing the product, lubricate or change the fasteners, and repair the door leaf. After the repair, the main task is to install the door leaf evenly so that it opens easily. The position of the product must be adjusted after installation.
The design of a plastic balcony door is not very different from ordinary interior doors. The door to the balcony includes a door frame and a leaf fixed on hinges. You can remove the balcony sash with your own hands. The product is small in size and light weight, so all work can be done without an assistant.
Most often, plastic balcony doors are installed with only 2 hinges, which speeds up the work of dismantling them. You can also find sashes on 3 fastenings - then you will need slightly different calculations and dismantling methods.
The fasteners have a simple removable design, so the balcony sash must be opened slightly and raised by 2-3 cm using a pry bar as a lever.
To remove the balcony sash from its hinges you need to:
- Remove the protective caps from the fasteners.
- Open the sash slightly, but do not block it.
- Press down on the top fastening pin to pull its end out of the groove.
- Using pliers, pull the pin out of the groove, first grabbing it at the bottom of the loop.
- Bend the sash towards you and pull the sash up by the handle to release the lower pin.
- After this, the structure is freely removed.
When the product is removed, you can carry out repairs and lubricate the fasteners.
Reverse installation
When installing the door in place, all work is carried out in reverse order:
- First you need to install the canvas in the door frame opening so that the hinges can easily be placed on top of it. Need to be adjusted according to location bottom mount. The sash must be kept level so that there are no distortions in the future.
- Place the hinge on the support rod and adjust the location of other parts.
- Close the sash without holding the handle or installing locks.
- Mount the upper and lower axial cylinders of the fasteners and press on the lower hinges. The edge of the pin should rise until it clicks. The end of the rod should be in its initial position and protrude from above by no more than 50 mm.
- The fasteners are screwed with a hex key to align the door. Then you need to install it in place and put on the decorative caps.
After all this, functionality is checked door design. Before using the structure, you need to lubricate the hinges with oil.
The product is adjusted using a limiter and a microlift. These devices will help eliminate problems and sagging of the canvas. When the sash is closed, the microlift takes on the load. This device is made in the form of a roller, which is located at the bottom or top of the movable plate blade.
Proper care of hinges
Hinges need proper care. Therefore, after removing the door leaf, they need to be processed.
Let's look at how to lubricate PVC door hinges:
- Clean the structure from debris and dust. You can wash it with gasoline.
- Wipe the mounting surface and remove all dirt.
- Lubricate the fasteners with special lubricant.
Lubricant can be bought in stores. It is sold in an oil can, which will make it more convenient to treat the fasteners with lubricant. Processing can also be carried out if the canvas is in place.
Hide
Plastic doors require maintenance at least twice a year. This procedure includes lubrication and adjustment of moving mechanisms. Quite often it is necessary to remove the sash, however, how to remove a plastic door from its hinges , Not everyone knows. This is a simple procedure that you can learn.
Application and design of plastic door
Plastic structures are very often used in various residential buildings, are used in office premises, in production workshops. That's why knowing how to unhinge , can be quite useful. It is worth noting that plastic doors, regardless of their application, have a similar design, and the leaf will be removed in the same way.
It is necessary to dismantle the door, if such a need arises, following certain rules, otherwise the structure may be damaged. Before you take it to the balcony , you will need to carefully study its design, this will help you understand not only how the door hardware works, but also how it is removed. First, find out which hinges are on your door. They may be structurally different from each other.
Most plastic doors have a similar design, which is not much different from the design of a regular one hinged door. The main part of any door is the frame: it is attached to the walls of the room, and the door leaf is screwed to it using hinges. It is very important that the door is installed level, only in this case the leaf will fit tightly to the frame, preventing cold and moisture from entering the room.
Plastic doors are structurally slightly different from conventional hinged hinges; they are held on a special pin that can be unscrewed, and it is not found in a regular hinged hinge. wooden door. Pay attention to how many hinges are installed on your door: usually there are three, less often four.
Many designs have glass insert, this not only significantly increases their weight, but also makes them more fragile, so you will need to be careful when removing the sash. It is most convenient to do this together.
Hinges for PVC doors are screwed at an equal distance from each other. This is important, since this arrangement allows you to evenly distribute the load from the weight of the door leaf and avoid sagging hinges. The lower and upper elements are usually located on the line of the box. They look molded, but they are not: in order to get to the hinge holding rod, you only need to remove the plastic decorative caps.
When is it necessary to remove the door?
Property owners don’t always have to think about how to remove a plastic door; more often than not, maintenance is available without disassembling the structure, but in the following cases the door will have to be removed:
- Some fasteners have failed and require replacement. To replace and adjust some parts, an action such as removing the plastic balcony door is required.
- The canvas is damaged and requires replacement, or one of the hinges needs to be replaced.
- The room is undergoing renovation work; it is necessary to protect the door from contamination and accidental damage; it prevents large objects from being carried through the doorway.
- Moving furniture. It makes sense to remove the door so that it is not in the way, then install it in place.
How to remove the door correctly?
Door hinges for plastic doors are a rather delicate mechanism, so you need to handle them carefully. Removal of the canvas should proceed as follows:
The weight of the sash is large enough, do not drop it. It is better to act with an assistant.
Methods for caring for loops
If for some reason you have removed the door from its hinges, do not rush to put it back. The hinges may need some care, so taking advantage of the moment to treat them will not be a bad idea. To do this, you need to know how to lubricate the hinges of a plastic door correctly. 
- Rinse the removed structure from debris and dust that has accumulated in it. This can be done using gasoline.
- The surface must be wiped dry and any remaining dirt removed.
- After this, you can lubricate the structure with a special lubricant. This can be a solid hinge material or a liquid sold in specialty stores. The second option is the most convenient, as it is packaged in a convenient grease container, which makes it convenient to apply lubricant. This can be done even if the door is in place.
To lubricate the hinges and mechanisms of a plastic door, you must use only special oil; you should not use substances not intended for this purpose.
If you need to remove the door from its hinges, you can easily do it yourself. The procedure will not take much time. Hanging the door back is also not difficult; you will need to proceed in reverse order.
Door hinges for plastic doors - the mechanism is quite delicate, so you need to handle it carefully Plastic doors are attractive and affordable elements that have a wide range of uses today. PVC entrance doors can be seen in government institutions, private offices, production workshops. In private construction, plastic doors are used as balconies, loggia doors, garage doors, summer kitchen. Often, in order to repair the plastic sheet, replace glass or hinges, the plastic door has to be dismantled. How to remove the canvas without professional help - find below.
Hinges for plastic doors: device and selection criteria
Plastic doors are attached to two door hinges, located on one side of the door frame pillar. Door hinges for PVC structures differ in the method of attachment to overhead and applied ones. For balcony doors, overhead hinges are used, which allow the door to be adjusted. For pendulum entrance and interior plastic doors, applied hinges are used, which look like a door closer.
Door hinges are a part of profile fittings
To easily and quickly remove a PVC door, you need to know the structure of door hinges.
A set of hinges for plastic doors consists of a leaf part with a metal insert, an aluminum frame part with pins for fastening, a spacer made of a metal alloy for connecting the frame and sash, and fasteners.
The hinge components allow the door to be adjusted without removing it.
So, in order to adjust the door horizontally, you need to use a hinge template (metal tab), and vertically - with adjusting screws, which are located under the decorative caps.
In order to choose a new loop to replace the old one, you must consider:
- Door size and weight;
- The design of the door frame and leaves;
- Profile wall thickness;
- Method of opening the door.
The hinge can be replaced only after removing the plastic sheet. To replace a door hinge you will need pliers or a side cutter, a punch and a hammer.
Dismantling a plastic entrance door: how to remove it from its hinges
Removing the plastic entrance door from its hinges may be necessary if one of the hinges has been damaged or the door has become faulty and needs repair. In addition, the door will have to be removed in order to lubricate the hinges with oil.
Thanks to the successful design of the plastic door, replacing a faulty hinge does not cause any special technical problems
Experts in metal-plastic structures advise lubricating door hinges at least once a year: this allows you to extend the life of the structure.
Withdrawal procedure entrance PVC doors with hinges have certain nuances, because Entrance door, unlike interior and balcony doors, it is equipped with reinforced hinges and anti-burglary mechanisms. Due to the heavy weight of the structure, working alone can be quite difficult. In addition, the input metal-plastic door, usually hung on three loops.
In order to dismantle the entrance metal-plastic door you must:
- Disassemble all three boxes: remove protective decorative overlays, prying them off with a screwdriver.
- Press the top hinge pin with a hammer and pull it out of the groove by the lower end using pliers.
- Do the same with the middle loop.
- Raise the doors up 50 mm and tilt the door towards you. If the canvas is heavy, then this can be done by placing a lever under the door.
- Rotate the doors to activate the bottom swing arm and remove the door from the bottom hinge.
After dismantling, you can lubricate or change the hinges, or carry out repair work on the blade. After graduation repair work The main thing is to install the door level so that the door opens and closes freely. You can adjust the position of the door after it is installed.
Instructions: how to remove a plastic balcony door from its hinges
The design of balcony doors is not very different from the design of conventional interior doors: a balcony door also consists of a door frame and a leaf on hinges. You can remove the balcony door from its hinges on your own: thanks to small sizes and the weight of the door, work can be carried out without outside help. In addition, the balcony door is often installed with only two hinges, which allows the work to be done quickly.
Provided that the hinges are simple removable overhead or applied, then you just need to open the door slightly and lift the door by two to three centimeters using a pry bar, using it as a lever
To remove from hinges balcony PVC door needed:
- Remove the protective caps from the hinges.
- Close the door, but do not block it.
- Press the top hinge pin so that its end is pressed out of the groove.
- Grab the pin from the bottom of the loop and use pliers to pull it out of the groove.
- Tilt the door towards you and gently pull the handle towards the ceiling so that the bottom pin is released.
- Remove the door from its hinges.
After this, further repair work can be carried out. The balcony door is installed in the reverse order: first, the leaf is put on the lower hinge, and then it is leaned against the plane of the door frame. Next, the upper loop is assembled: an axial cylinder is inserted into the loop mechanism from below. At the final stage, protective caps are put on the loops.
How to disassemble a plastic door
Repair of a plastic door, in some cases, can be carried out without removing the door from the hinges. So, for example, without removing the door you can replace the glass in the frame, plastic sash in the canvas. The door consists of a frame, double-glazed windows and a PVC panel. The elements are held in the frame by glazing beads.
To disassemble a plastic door you need a lot of experience
In order to disassemble a plastic door you need:
- Prepare the tool. A flathead screwdriver is suitable for the job. sharp knife for a plane.
- Insert a screwdriver into the groove between the bead and the door frame and separate the bead.
- Remove the top and bottom beads, then the side ones.
After this, glass or plastic panel you can easily remove them and replace them with a new element. The glazing beads are inserted back without additional fasteners.
How to remove a plastic door from its hinges (video)
Plastic doors, today, can be seen on almost any construction site: they can serve as entrance, balcony, and interior doors. In order to replace the plastic door or hinges, if necessary, it must be dismantled. You can remove doors from their hinges without professional help. This is done quite simply. The main thing is to strictly follow the instructions, and you will be able to dismantle quickly and efficiently!
Let's imagine a situation: your new acquisition, your pride - a plastic door - has stopped closing. After the installation, carried out by the company's employees, there were some doubts about the correctness of the installation. The structure closed with some distortion, the lock was broken or closed only when force was applied. What to do? Call the same “workers” again? No, you have to do it once and conscientiously.
How to remove the door?
During the repair process, you may need to remove the canvas from the hinges, but how to do this? Now we'll tell you! First, a little theory.
General device
The material used to make doors is polyvinyl chloride. Plastic is an indispensable material in terms of water resistance. Moisture threatens both external and internal doors. With external doors it is clear that this is direct contact with humidity atmospheric air, and internal evaporation condensate.
Interior doors face particularly damp conditions in kitchens and bathrooms. Of course, the plastic is only a covering; steel plates are attached inside the structure. In addition to the canvas itself, the kit includes a non-separable door frame. (photo) In order for a door to fulfill functional requirements, it is necessary to have a door in the design special type parts called fittings.
The entrance plastic structures are quite heavy because they have a multi-chamber structure and are burglar-resistant. In connection with this and other features of this type of device, special loops are used to connect the canvas to the box. This is the main part of the fittings, the main part of the design of a plastic door. Loops are divided into:
- removable;
- fixed;
- screw-in;
- card;
- invisible.
The very name screw-in hinges, along with overhead and applied hinges, speaks of the method of attaching the hinges to the door.
Hinges for plastic doors are made of especially durable materials based on Teflon. In addition to the fact that the hinges bear the load from the door leaf, they must ensure easy movement of the door and a tight fit of the leaf to the frame.
Over time, any balcony door needs adjustment, which experts recommend annually, and minor repairs in some cases. It is not necessary to involve specialists to carry out this work; adjustment and simple repair of a balcony door, if you know simple technology, can be easily done on your own, while saving money.
Fig. 1 Design of plastic door leaves
Repair work on doors on a loggia or balcony, which you can do yourself
Breaking internal parts fittings requiring removal of the leaf and subsequent disassembly of the door leaf, significant mechanical damage plastic frame balcony doors, deformation and decomposition of plastic due to temperature and chemical exposure are not subject to self-repair. If the hinges in the frame or door leaf are torn out, the welds break and come apart, complex repair work is also required.
In most cases, it is necessary to replace the fittings and door leaf, which can be quickly installed by a specialist knowledgeable in repairs. You can perform the following simple operations to repair PVC doors with your own hands:
- adjustment of the blade horizontally and vertical plane, pressing force to the frame;
- replacing broken locks and handles, adjusting them if they become loose;
- inserting a new seal into the canvas and frame;
- replacement of glass bags;
- Cosmetic repair of scratches and minor damage to the door leaf.
Rice. 2 Some damage to the PVC balcony profile
Adjusting the plastic door leaf
The standard design of plastic balcony doors has adjusting elements in the form of bolt heads with hexagonal sockets; the main tool for rotating them is an L-shaped hex key with a diameter of 4 mm. Adjustment work includes the following operations:
Rice. 4 Setting the distance and blade pressure, checking the compaction
Replacing handles and locks
Usually a balcony lock is built into the handle; if it breaks or does not work well, it is removed and the locking mechanism is lubricated; if this does not help, the fittings are completely changed. The same is done with mortise or overhead locks that may break - they are changed if the lubrication does not help.
If it's broken door knob, its replacement consists of several operations:
- Pull the decorative PVC trim towards you and turn it 90 degrees.
- Unscrew the fastening bolts and remove the window handle.
- They install a new mechanism and screw it with new or old bolts, cover the handle with a cover.
Rice. 5 Replacing the handle
Removing the door on the balcony
When carrying out some repair work, the question arises of how to remove a fiberglass balcony door. It's quite simple, the operation is carried out in the following order:
Rice. 6 How to remove a plastic door leaf: work order
- Before removing the PVC balcony door, remove the protective plastic covers from the hinges, slightly pulling them towards you; if necessary, they can be slightly bent with a flat screwdriver.
- Depending on the design, the balcony door is removed from its hinges by moving the released pin in the top hinge down or up, pressing on the free end with a finger or a hard object; if the movement is tight, you can pull it out with pliers.
- Now you can remove the door, for which we open it slightly and lift it up, removing it from the lower hinge until the sash is free.
Reinstallation is carried out in the following sequence:
- The door leaf is placed with the lower hole on the axis fixed in the frame (it is more convenient if the axis is slightly deviated from the vertical position).
- Bring the upper loop to its part with the hole and, holding the blade, insert the cylindrical pulley into place.
- Put on the plastic covers and close the door leaf.
Installing a new seal
The sealing tape on the balcony door is changed if cracks, hardening, or ruptures appear on it. To change, you should select a seal that matches the given profile; you need to install the tape on the door leaf and frame (you will need to remove the plastic balcony door), keeping in mind that these are different seals with a different cross-sectional shape.
Chamber types provide better sealing; unlike petal types, their cross-sectional area is larger, and they should be given preference when purchasing.
To replace the tape, you must perform the work in this order:
We prepare two different sealing tapes for the canvas and the box.
- We remove the plastic balcony door from its hinges. To do this, remove the plastic covers and pull out the metal pulley, then open the door slightly and move it upwards and remove the door leaf from the bottom hinge.
- We lay the canvas on its side, tilt the fastening of the top hinge to the side and remove the old tape, its connection is located in the middle of the top of the door leaf - dismantling should begin from there.
- We insert a new tape from the middle of the upper part, avoiding strong tension in the corners, glue the ends of the tape to each other and to the frame with rubber glue.
- We return the top hinge to its place and proceed to replacing the seal with door frame. We remove the old tape, clean the perimeter from dirt and dust and install a new seal, gluing it at the top in the middle.
Rice. 7 Installing a seal in fiberglass door leaves
When carrying out work, you should be careful not to confuse the mounting side of the sealing tape - usually it is located in the wide part of the profile with outside canvases and boxes.
Replacing damaged glass
You can repair a broken double-glazed window with your own hands by replacing the broken glass and gluing a sheet of the same size in its place. this work It takes a lot of time and does not bring significant financial savings, so if it is damaged it is easier to replace it with a new one.
The work can be easily done with your own hands if you order a new double-glazed window according to the dimensions of the old one - for an accurate measurement, just remove the top and side beads and measure the width and height of the damaged package with a tape measure.
Rice. 8 Replacement of double-glazed windows for plastic balcony doors
Installation of new glazing is carried out in the following sequence:
- Holding the glass window, remove the top and side beads, prying them off with a narrow spatula or a wide flat-head screwdriver.
- We remove the old bag from the frame, clean the opening from dirt and dust and install new glass.
- We return the glazing beads to place easy by pressing.
When carrying out work, it is important not to mix up the fasteners (it is better to mark the glazing beads), otherwise small gaps may appear in the corners due to deviations in size.
Repair of plastic door surfaces
There are several ways to solve the issue of how to repair plastic coating:
- Glue Cosmofen. Is liquid plastic low viscosity, cloudy transparency, used for gluing hard plastic structures, dries within 4 seconds, the total setting time is 16 hours. To remove scratches, use white Cosmofen, which is applied to the damaged surface, after hardening, it is removed with a sharp chisel and then sanded.
- Specialized putties for plastic. When deciding how to repair severe damage, you should focus on automotive putties. These materials are widely used for repairing plastic and can be used to cover big holes in plastic, and after sanding and painting you get a fairly smooth surface.
- Using a hair dryer. For removing minor scratches you can use a regular hairdryer - if thermal effects The edges of the scratches melt and they become less noticeable.
Rice. 9 Plastic repair
You can make adjustments and simple repairs to the doors on the balcony on your own (remove and insert a double-glazed window, replace the seal or handle) - the work requires ordinary household tools and minimal construction skills. To eliminate significant damage or noticeable scratches on plastic, it is more practical to use the services of specialists who can replace the door or professionally hide the damage.
