Ceiling tiles are a beautiful finishing material, are especially popular, have a number of advantages, are inexpensive, and can be installed yourself without specialists. One of the common types of tiles, polystyrene foam, has a variety of shapes, patterns, and can be smooth. Can be glued to concrete or drywall. Resistant to water, easy to maintain and use. If desired, it can be painted acrylic paint in any color. When choosing it, make sure that the edges are intact and not sprinkled. To test its strength, grab it by one corner; it should not break under its own weight. There should be no dents or flaws on the sheets.
Preparing the ceiling for gluing
Before starting work you need to carry out preparatory work on the ceiling. If you had wallpaper on the ceiling, you need to remove it completely, old putty, lagging pieces of mortar, most often in seams concrete slabs. If there were previously tiles glued to the ceiling, it will not be easy to remove, take a spatula and slowly remove it and the remaining glue. Large cracks and holes in the slabs need to be filled with putty. If the ceiling has been whitewashed, it is better to remove the whitewash. Some experts claim that you can glue it to whitewash and the tiles will stick. Yes, it may stick, but it won’t last long; over time, it will start to come off along with the whitewash.
As a rule, after cleaning the slabs may be stained or there may be traces of wallpaper. Better surface pass the thin layer putty, then the ceiling will be the same color and stains will not be visible through the thin tiles. If you choose a thick one without seams or embossed with patterns, you don’t have to putty the ceiling. After the putty has dried, treat the entire surface to be glued with a special primer for concrete. The primer is used to remove dust from the surface and strengthen the putty.
What is the best way to glue ceiling tiles?
You need to choose an adhesive for gluing depending on the tiles you will be gluing and the room in which you will be gluing. Exists big choice glue for gluing.
The glue may be on water based, solvent-based or resin-based (compounds). The most common adhesives:
- Polyvinyl acetate - odorless glue, liquid, consumption exceeds similar ones - liquid nails, takes a long time to dry;
- “Liquid nails” is a thick glue, applied in a thick layer, it must be applied using a special tool. It may be incompatible with some types of tiles; the solvent contained in the adhesive can spoil and corrode it.
- Universal polymer adhesive - glues almost everything. The consistency is quite viscous and holds well. ceiling tiles. This group includes adhesives: “Titan”, “Eco-Naset”, “Master”. Master glue has a pungent odor and takes longer to dry than others.
- “Moment” – the glue dries quickly after application. To work you need a special gun. By pricing policy The glue is more expensive than others, it is consumed more, but it is the most convenient for work and justifies itself.
As a rule, the product you are going to glue will indicate the recommended type of glue. The strength of the entire ceiling structure depends on its properties.
Ceiling markings
There are several ways to glue tiles:
- parallel to the wall;
- diagonally;
- diamond
The most common method is gluing from the center of the ceiling. You need to find the geometric center of the ceiling, you can use diagonals. Then mark the surface from the center. The hardest area to glue is near the chandelier. To make your work easier, you can start gluing from the chandelier.
Depending on the size of the ceiling, you may end up with a small strip along the wall, and it will also not be parallel to the wall. You can glue from the corner, then you need to choose the corner that is best visible from front door. Typically this method is used for long and narrow rooms.
How to glue ceiling tiles video
To glue the tiles diagonally, we make markings on the ceiling. We take a thread and stretch it from one corner to the opposite corner, and from another corner to another opposite one, we get the intersection of the diagonals, these lines are the markings for gluing, the intersection of the threads indicates the center of the ceiling. This option is used for gluing large rooms.
How to glue ceiling tiles with a diamond pattern
The most beautiful and popular way of gluing tiles is considered to be gluing with a diamond shape. Squares are measured from the center of the ceiling. Lines are drawn diagonally in each square. The corner of the glued tile lies from the center of the ceiling, and its sides follow the drawn lines. Then the pattern will look symmetrical on the ceiling and the edges will fit equally to the walls. When gluing using this and the diagonal method, you need to take into account that the material consumption will be greater.
You need to start gluing from the chandelier. You can take a tile in the center and make a hole for the chandelier, run a wire there and glue it. You can glue four tiles from the chandelier by cutting off the corners for the chandelier wire. The cut corners will then be covered with a cup from the chandelier. Before starting work, be sure to turn off the electricity for safety reasons.
We take the tile, apply glue to the back side, drops along the edges of the tile and diagonally. We lay the first according to the markings, aligning the edges with the lines. When pressing it to the ceiling, do not press hard so as not to leave dents on the tile. You can use a sponge for gluing. We lay the subsequent ones close to the first, aligning the sides.
Before applying glue to the next one, place it on the ceiling to the glued one, check the evenness of the sides. If you identify any irregularities, cut them off with a regular stationery knife for cutting paper or a special construction knife. To trim it, you need to lay it on chipboard or other dense surface. Do not cut while it is in weight, so as not to damage it. If the installation is carried out unevenly, this may later cause displacement and the formation of cracks. Near the walls, tiles are cut as needed, after taking measurements. Therefore, when purchasing tiles, you need to consider how they will be glued. Typically, the ceiling area and 10-15% for reserve.
If gaps have formed during gluing, they must be sealed with white sealant; this option is suitable for non-laminated white boards; moreover, it can be painted in any color.
Gluing ceiling tiles without seams
For gluing without seams, you need a special tile. It does not have the usual edging, so the joints become invisible. On back side There are markings - special arrows that indicate the direction of gluing. Choose tiles with uneven edges. We start gluing from the center of the room. We make a hole for the chandelier. We glue it strictly according to the arrows indicated on the back side, this will make the seams invisible. We place it tightly to each other so that there are no seams, and press it tightly to the ceiling.
The joints between the ceiling and the wall are covered with ceiling plinth. It is glued with the same glue as the ceiling tiles. With a plinth, your ceiling takes on a beautiful aesthetic appearance. The plinth covers all the unevenness in the trim near the walls.
Ceiling tiles are lightweight material made of polystyrene, which has been popular for many years. After all, with its help you can hide defects in the ceiling surface and decorate it with tiles of different shades and with different patterns. The tiles are easy to work with, they are glued easily and quickly. Even a beginner can handle this, provided he knows how to glue ceiling tiles correctly. We will talk about this in detail in this article.
Textured tiles on the ceiling create an atmosphere of aristocratic luxury in the room.
Ceiling tiles can be glued horizontally and diagonally. It is believed that tiles glued diagonally better mask the curvature of the surface. The material serves for a long time without requiring any special conditions care A damaged element can always be replaced (in the kitchen you often have to replace the tiles located above the stove).
How to glue ceiling tiles: video instructions
How to properly glue tiles to the ceiling
The first thing you need to do is prepare all the materials and tools that will be used. They should be at hand during work. Then you won’t have to be distracted and irritated by little things. You will need a minimum number of tools. Prepare sharp knife stationery, large scissors for cutting tiles, painting cord for marking the ceiling (if you don’t have it, take chalk). You will also need glue and the actual ceiling tiles, the choice of which we will discuss separately.
Kitchen ceiling tiles don't have to be fancy, but they should be easy to clean.
For preparatory work you will need a sharp narrow spatula, a primer deep penetration, roller, brushes, rags and simple pure water. If you decide to paint glued tiles, you will need water-based paint. Most often, ceiling tiles are painted in White color, but you can paint the surface any color you like, or even use multiple colors. It all depends on your design idea.
Choosing tiles and adhesive
Depending on the production method, the following types of ceiling tiles are distinguished:
- pressed (6-8 mm thick), this is the simplest and cheap tiles, you won’t achieve a wide variety of decors, but you can hide minor defects in the ceiling;
- injection (9-14 mm), which is considered a higher quality tile;
- extruded tiles are the highest quality, they are low-grained, smooth, but are more expensive than other types of ceiling tiles.
Tiles of different colors and textures from different manufacturers are presented on the building materials market
When choosing ceiling tiles, pay attention to the correct shape and dimensional accuracy. If you decide to buy the cheapest pressed tiles, remember that the sizes may not be the same even within the same batch. The discrepancy seems insignificant, but it will be noticeable on the ceiling; you will not be able to achieve a perfect fit. The corner should be straight, not rounded. Only by choosing quality tiles, you can make the seams even. In addition, your work will be easy and pleasant. Try not to skimp on material. Also evaluate the evenness of the edges and the grain of the tile. The edges should be smooth and not crumble. Another sign of high-quality ceiling tiles is same size polystyrene grains on it.
Ceiling tiles can be suture or seamless. Seamless tiles have jagged edges, which coincide with each other (fit like a key to a lock). In this case, the seams on the ceiling are invisible. The joint tiles have smooth edges and the seams on the ceiling are visible. So think about what tile would be better suited to the design of the room.
Seamless ceiling tiles - good choice for perfectionists
An important criterion for choosing a tile is the pattern on it. Polystyrene ceiling tiles can be simple and smooth, or they can be decorated with complex patterns. If you have chosen tiles with a complex pattern, in the process of gluing the ceiling a situation may arise, as when gluing wallpaper with a pattern - it will have to be adjusted. This means that you need to take extra tiles. To help you, on the back of the tile, manufacturers show the direction of the pattern with arrows. Tiles with a simple pattern that does not require adjustment can be glued either side to any side.
The main requirements that consumers place on glue are good adhesive properties and the absence of solvents hazardous to humans. Construction stores offer a huge number of brands of glue from domestic and foreign manufacturers intended for products made of polystyrene foam. It is, of course, difficult for the consumer to make the right choice.
For gluing the ceiling, glue “Eco-carrying”, “Titan”, “Moment” is often used. The first two adhesives are from Polish manufacturers. Both glues have good adhesive characteristics. But when installing ceiling tiles, the elements must be pressed against the ceiling until the glue sets. “Moment” in this regard has an advantage over Polish adhesives, since it sets instantly. But you will need much more of this glue, which will affect costs. In addition, you will need a special gun for sealants.
Glue and mounting gun — necessary tools for installation of ceiling tiles
Eco-naset adhesive for ceiling tiles is chosen by those who value the harmlessness of building materials
But these three types of glue are only a small part of what is offered in construction stores. In principle, everything sticks well. Therefore, decide which glue to use to glue the ceiling tiles based on your financial capabilities.
Manufacturers offer many different types ceiling tile adhesive
Mastic for adhesive ceilings, and even ordinary putty, can also serve as adhesive for ceiling tiles. Many experts and DIY repair enthusiasts recommend making your own glue by mixing plaster, putty and PVA glue in equal quantities. But remember that plaster dries very quickly, so do not dilute too much adhesive, make enough to work it out in 10 minutes.
Surface preparation
Before gluing tiles to the ceiling, you should carry out preparatory work. Thoroughly clean and, if necessary, level the surface of the ceiling. If the ceilings are covered with plywood or chipboard, prime the surface. Before starting work, the ceiling must be clean, grease-free and dry. The adhesive is applied to the tiles pointwise, since the weight of the elements is small. Apply glue from a can or bottle directly to the surface.
To ensure that the tiles lie flat and hold securely, you should take care of high-quality preliminary preparation surfaces
Many people have difficulties with tiling the ceiling. electrical wires for lamps. If the chandelier is located in the center of the room, it is better to start pasting from here. Place four tiles around the wire so that there is a gap between them. Cut off the ends of the corners of the tile that touch the wire. Don’t worry that it will be noticeable, everything will be covered by the glass of the chandelier.
If you decide to glue the ceiling from the wall, and not from the center, then on the tile that covers the exit point of the electrical wire, you need to make a hole for the wire. In this case, you need to glue the tiles row by row, starting from the wall, and when you reach the location of the chandelier, measure the distance from the beginning of the tile to the point where the wire exits, make a hole in the tile, turn off the power to the apartment and pull the wires into the hole made. Even if the hole is a little larger, it will also be closed by the glass of the chandelier.
How to beautifully tile a ceiling: finishing options
Decide exactly how you want to place the tiles on the ceiling. There are many options for covering the ceiling with tiles. It all depends on the features of the room and your imagination. Anyway, a small amount of The adhesive composition is applied pointwise to the tile, the element is pressed to the surface of the ceiling, and held for several minutes. During this time, the glue sets to the surface and the tiles are securely held on the ceiling.
Diagonally, if the chandelier hangs in the center of the ceiling
This happens quite rarely. But if this is your case, marking is easy to do. Pull two threads diagonally, mark the point of their intersection. This will be the center, which should coincide with the exit point of the wire for the chandelier. Draw two lines through the center perpendicular to each other. Thus, the ceiling surface is divided into 4 equal parts. The first square is glued so that one of its corners is located exactly in the designated center of the room. Next we move along the drawing. The tiles should be glued to the ceiling closely, without leaving gaps or seams; wipe off any remaining adhesive with a dry cloth.
Tiling the ceiling starts from the center of the room - this makes it easier to avoid overlaps and mismatches
What if the chandelier is not in the center of the room?
The tiles are glued similarly to the first case, but the markings are done slightly differently. Two perpendicular straight lines are drawn through the point where the chandelier hangs. These straight lines should be parallel to the walls of the room. In the resulting right angles we draw lines at an angle of 45 degrees. Next, we glue the ceiling tiles in the same way as in the first option.
How to glue ceiling tiles with a snake
To do this, you will need ceiling tiles of two colors. It is important to choose two colors that go well together. Mark the ceiling surface as in the first or second option. The tiles are glued from the center according to the drawing.
“Snake” is one of the common methods of laying ceiling tiles
How to glue tiles to a ceiling in a checkerboard pattern
You should also start from the center of the room, which we find by drawing diagonals. It is very important to arrange the elements so that they are strictly parallel to the walls, otherwise general form the ceiling will be damaged. There are times when it is not practical to glue ceiling tiles from the center of the room. For example, if the room is small, when tiling the ceiling from the center there will be a significant overuse of tiles. Or in cases where the room is narrow and long (a corridor, for example), it can be difficult to correctly mark the ceiling and glue the tiles in the center parallel to the walls. In this case, it is better to glue the ceiling tiles, moving from the edges to the center.
Tiles laid in a checkerboard pattern always produce the desired decorative effect
Possible difficulties when working with ceiling tiles
Difficulties may arise due to mismatched tile sizes. These dimensional errors are, at first glance, unnoticeable, but when the design is strictly adjusted, they become noticeable. Therefore, do not glue the tile until you are sure that its dimensions correspond to the dimensions of the previous tile. If there are any discrepancies, cut off the excess tiles with a paper cutter or assembly knife. You should cut along a ruler, then the cut will be even. Experts recommend cutting ceiling tiles by placing them on a sheet of corrugated cardboard. Cardboard from packaging for household appliances is perfect.
Another problem that often arises when tiling a ceiling is the gaps between the tiles and the wall. This occurs due to the unevenness of the walls. If this distance does not exceed 15 mm, you don’t have to worry about it - everything will close ceiling skirting boards(fillets), which are glued along the entire perimeter of the ceiling.
The ceiling plays a significant role in the design of a room. A unified style in the room is achieved through clear thought out every detail of the interior. The easiest option is to use whitewash or paint to interior spaces to decorate the ceiling. Gluing wallpaper to the ceiling is somewhat difficult and this type of ceiling design does not always justify itself. The most acceptable in all respects is the use of tiles as a material for decorating the ceiling. But how can you glue ceiling tiles correctly and which one is better to choose?
Ceiling tiles have square shape. Sold in blocks designed for square meter surfaces. In manufacturing, two types of external surface treatment are used. The first type - the outer side is embossed and is intended for painting. The second one has a laminated front side, already painted during manufacture.
When choosing blocks, in addition to color and functionality, you must also take into account the size of the tiles. Before purchasing, make calculations so that you need to buy the same number of tiles of the same color or pattern at a time, with a small margin just in case. If in the middle of the work it turns out that some of the tiles are defective or you are missing several pieces, it will be difficult to choose the same color or find an identical pattern.
Why ceiling tiles
In most apartments, the ceiling surface is uneven, with obvious flaws. To hide unevenness, you can use hanging or stretch ceiling. But for the average citizen this option is too expensive. There are no difficulties with how to glue ceiling tiles. It is enough to use special glue and rules for gluing blocks to the ceiling.
The main advantages of ceiling tiles are as follows:
- An uneven ceiling and all flaws can be hidden with the relief surface of the ceiling tiles, and the room will look stylish and comfortable.
- the cost of the blocks is relatively low, a minimum is required for gluing Supplies, and you can do the gluing yourself.
- for creating unique design, ceiling blocks can be glued in a straight line or diagonally.
- The service life of the tiles is long, and if damaged, it will be enough to replace the deformed section.
- the structure of the ceiling blocks is such that they can be used in rooms with high humidity and sudden temperature changes, for example, in the kitchen or bathroom.
How to choose tiles
On construction market You can find several types of tiles. It differs not only in price, but also in some features.
Manufacturing method and characteristics
The pressed or stamped type of ceiling blocks has a thickness of 6–8 mm. Most cheap option with a simple design. Such tiles will not add sophistication to your room, but they will perfectly hide all the unevenness of the ceiling. The surface of pressed tiles is loose and porous, so it quickly absorbs dust and dirt. Not the highest quality or durable material.
The injection type has a thickness of 9–14 mm. A higher quality product is produced in the form of regular geometric blocks with a clear relief pattern. This allows you to create a surface with barely noticeable seams. In addition, injection blocks have high soundproofing and moisture-proof characteristics. Unlike pressed blocks, it has increased strength and fire resistance, but its price is much higher. Available in the form of white blocks for painting.
When choosing tiles for the kitchen or bathroom, give preference to the extruded type. Your ceiling will be reliably protected from negative influence moisture, which means from dampness and mold!
The extruded type of ceiling blocks is available in a thickness of 2–3 mm. Due to the production features, such tiles come out smoother, without graininess. The most durable and hygienic material. During production, the surface of the tile is covered with a special film to protect it from dust and dirt.. Thanks to this, it is easy to care for such tiles - just wipe with a damp cloth. Compared to other options, this type is the most expensive, but it performance characteristics allow you to save on subsequent repairs. To update the look of the room, it will be enough to simply repaint the slabs in a different color.
Features of the surface and joints
In addition to the blocks of the correct geometric shape, seamless slabs are also produced - uneven edges allow you to glue blocks without gaps, like a puzzle. This design option will create the illusion of integrity. ceiling covering.
Boards with a laminated surface are painted in various colors. Thanks to lamination, they appearance will please you for a long time bright colors Moreover, they are resistant to moisture.
To expand the space of the room, you can use ceiling blocks with mirror surface. Instead of lamination, on outside The plates are coated with a special mirror layer. By reflecting the surface of the walls and floor, such a ceiling will create the illusion of infinity in the room space.
Where to start
Having selected the ceiling blocks and prepared the surface for gluing, it is necessary to decide a number of technical points. Starting the installation of tiles from one corner of the room and so on across the entire surface is the most thoughtless option. To ensure that the ceiling has an aesthetic appearance and does not spoil the entire interior of the room, you should consider placing the blocks on the ceiling before gluing. There are a few important points, which are worth paying attention to. The most important of them is the placement of the chandelier.
- if the chandelier is located in the center of the room.
To properly stick the slabs, you need to follow the following technique. Two diagonal lines are marked on the ceiling with a cord or tape so that the chandelier is the point of their intersection. The first slab must be glued so that its corner rests on the point of intersection of the lines, and the two edges repeat the marking lines. Three other blocks also need to be glued around the lamp to form the correct rum. Diagonal gluing is the most effective method level the surface of the ceiling and create a beautiful pattern.
It is very important to glue the first row of blocks correctly. The straight lines of subsequent rows, as well as the unity of the pattern, depend on this.
To glue even rows of blocks, the surface of the ceiling must be marked with two more perpendicular lines. Then the first tile must be glued so that the perpendicular line passes clearly through the center of the tile. On the last rows, the tiles will have to be trimmed. To hide the gaps between the ceiling and the wall, use polystyrene foam skirting boards in the same color scheme, as tiles. They can be glued in the same way as blocks, using glue and a drip system for applying to the surface.
- if the chandelier is offset from the center of the room.
Marking the ceiling with two diagonal lines must be done so that in the center of their intersection there is a chandelier, and not the center of the room. Gluing the slabs occurs in the same way as for the first method. The first plate must be glued:
- for gluing diagonally - one corner to the center of the intersection of lines,
- for straight lines - a parallel line from the chandelier passes through the center of the block.
Having figured out how to glue ceiling tiles, you should choose the right glue. One of best options is the glue "Moment". It grips perfectly and will allow you to reliably glue the blocks to ceiling surface. Its cost is higher than its Polish counterparts, but the quality indicators are much better. In addition, it sets instantly, which will significantly reduce the time for gluing the entire surface.
Before gluing tiles to the ceiling, the surface must be prepared - cleaned of any remaining whitewash or paint. After this, the surface of the ceiling needs to be cleaned of dust and debris - just wipe it with a slightly damp piece of cloth.
To glue the block to the ceiling, on inner surface apply a few drops of glue: on external corners and a few strokes diagonally through the center. After this, the tile is briefly pressed against the surface of the ceiling, pressing slightly on the surface. Try not to press too hard; too much force will deform the outer layer of the tile.
For cutting blocks it is better to use stationery knife and a ruler, so the edges will be smoother. To mark the ceiling, you can use masking cord or tape. This will make it much easier to apply the tiles in even rows.
Lesson on gluing ceiling tiles (video)
__________________________________________________
Despite the wide variety finishing materials ceiling tiles are still popular. Such love on the part of modern consumers is ensured by the affordable cost, as well as the ease of installation of this ceiling covering, which I would like to talk about in more detail in this article.
In contact with
Classmates
How to glue ceiling tiles, what materials may be needed, how long it will take to complete the work - these are the questions that most often concern those who want to handle the gluing on their own.
Deciding on tiles
In this matter, you should be guided solely by your taste preferences. Indeed, with the help of seemingly simple ceiling tiles, you can achieve any desired effect. Laminated tiles are extremely popular. It has a denser texture, a glossy surface, and can also be cleaned and washed, which every housewife will appreciate. With the help of such tiles you can decorate the ceiling not only in the room, but also in the kitchen and even in the bathroom.
Moreover, modern manufacturers They offer a wide color palette of tiles, so everyone can find the option that matches their idea. If you want to emphasize your own individuality, then before gluing the tiles to the ceiling, be sure to take the opportunity to paint the tiles water-based paint. It provides a number of undeniable advantages: firstly, you get the shade that you need, and secondly, you develop your creative abilities.
Apply glue
Now, as for the physical characteristics of the tile itself. Be sure to pay attention during the selection process Special attention at the corners, they should be exactly 90 degrees. Only in this case will you be able to carry out installation work quickly and efficiently. Moreover, none of the corners should be jammed. That is why, during the purchasing process, check each package of tiles to avoid unpleasant consequences.
If you decide on a polystyrene tile with large grains, then make sure that its edges do not fray or break off, otherwise the process of working with such material will turn into real torture for you. Remember that the material is fragile and be careful when transporting it.
And, of course, if there is a pattern on the surface of the tile, then it must be clear, otherwise this seemingly small flaw on the overall canvas will attract attention and be conspicuous.
Spread the adhesive over the tiles
Preparatory work
Before you start gluing ceiling tiles, you should carefully. To do this, you need to remove the old coating. If it is whitewash, then you will have to wash off all the layers. The fact is that the result of the work associated with transforming your room largely depends on how thoroughly you remove the whitewash from your ceiling.
Before gluing ceiling tiles to a cleaned surface, take care of the soil. can be purchased at any specialty store. Using an ordinary paint roller and its extension, it is recommended to cover the ceiling with several layers of primer.
If washing off whitewash is very tedious for you, then you can use a construction product. With its help, you will have to scrape off the whitewash layer, and then also go through a layer of primer.
Ceiling markings
At this stage of work, it is necessary to clearly determine how the tiles will be located on your ceiling. In fact, today there are many ways and variations of gluing polystyrene tiles. However, the simplest is to install the tiles parallel to the walls; less often, the tiles are placed diagonally.
If you cannot decide how to glue the ceiling tiles, then choose the easiest method. Your starting point should be the center of the ceiling. This is usually where the chandelier is installed. Moreover, special importance should be given to the first rows, since the entire result of the work you perform depends on how even they are.
You can start fixing the tiles from the center
Apply glue to the tiles
How to glue tiles to the ceiling? Of course, using construction glue. Today, consumers are offered a sufficient range of adhesive compositions. It is advisable to use special adhesive for polyurethane foam tiles. It will not only ensure reliable fixation of the coating on the ceiling, but will also not damage the texture of the tile, which quite often happens when using, say, “ liquid nails» wide range of applications.
So, it is recommended to apply the glue pointwise and let it sit for 5-7 minutes before laying. During the installation process, it is important to pay special attention to the edges of the tiles. Considering that the material from which it is made is quite fragile, the edges may look very careless and crumble, which will certainly affect the appearance of the finished surface.
The first tile must be glued so that one of its corners is at the central point of your ceiling, which you managed to determine using correct marking. And one more thing: it is important to press the tiles firmly against the ceiling, but this should be done very carefully to prevent the formation of dents on its surface. All subsequent tiles must be glued in parallel, trying to leave a minimum gap. If excess adhesive is formed during the gluing process, it should be immediately removed from the surface of the tile.
You can install tiles diagonally
We eliminate existing cracks
If until today you didn’t know how to glue ceiling tiles with your own hands, then you probably didn’t even think about the possibility of cracks forming. Yes, indeed, this happens, especially with beginners.
If you do not want to face such a problem, then purchase seamless tiles that create a perfectly smooth and smooth surface. Although we must admit that this type of polyurethane foam tile is quite expensive.
So, as for the cracks that have formed, you can get rid of them using construction sealant. It is advisable to use silicone sealant, since it is resistant to moisture and temperature changes.
Final touches
So, now you know everything about how to stick tiles on the ceiling. All you need to do is remove all excess glue, cut a hole for ceiling chandelier with help construction knife. IN in this case remember that it is not at all necessary to cut the hole with special precision and extreme accuracy, because it will be covered with an overlay. This hole is primarily intended for releasing wires, so it should be quite small in size.
If you want to add brightness and expressiveness to your ceiling, you can also use water-based paint. If speak about color palette, then give preference to pastel colors that visually expand the space. Of course, if you paint the tiles, you also need to use the baseboard to create a complete surface.
Well, and, of course, after all installation work, you should close the door to the room tightly to rid the space of unnecessary air movement.
How to glue ceiling tiles video:
In contact with
See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?
Would you like to suggest photos on the topic for publication?
Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!
Foam ceiling tiles are very beautiful, affordable and in a simple way ceiling decoration. Variations of designs on the market are presented in a wide range to suit every taste (from laconic to complex designs). Depending on the quality and complexity of the drawing, the price varies. It can be in any desired color in whole or in part. Often it is coated in silver or gold to match the interior, and visually such tiles cannot be distinguished from expensive materials.
Properly glued polystyrene foam tiles will not cause any trouble and are easy to work with in the future.
Ceiling tile adhesive. What to glue
The choice of glue will ensure long-term use, ease of gluing, and the ability to apply a layer in the desired proportions. Gluing slabs to the ceiling is quite a difficult task, because if the glue does not have fast astringent properties, then you have to hold the stove for a long time, which is not very convenient. Designed adhesive for gluing ceiling tiles has a time delay for regulation building material and drying time. Drywall adhesive is excellent for gluing tiles to the ceiling.
Jpg" alt="Choosing adhesive for ceiling tiles" width="560" height="420" srcset="" data-srcset="https://remontcap.ru/wp-content/uploads/2015/05/potolochnaya_plitka_kley..jpg 300w" sizes="(max-width: 560px) 100vw, 560px">!} 
Many owners want to use tiles to create a continuous sheet, without gaps. But, unfortunately, this will not work ideally, since the size of the plates differs by several millimeters.
We begin to glue the foam ceiling tiles. Different ways
The first plate should be glued to the place where it will be. This is due to the fact that the central part of the ceiling should look more solid and already diverge from it in all directions.
Using a tape measure, find the center of the ceiling and draw a line along it. It is along this that the tiles will be glued for evenness. If you decide to glue the tiles diagonally, then you need to draw a line (conveniently with a thread) from one corner to the other. The first two rows of glued tiles will set the trend for the overall picture - evenness, appearance. Scheme of where to start gluing:
Data-lazy-type="image" data-src="https://remontcap.ru/wp-content/uploads/2015/05/shema.jpg" alt="Options for gluing tiles" width="666" height="229" srcset="" data-srcset="https://remontcap.ru/wp-content/uploads/2015/05/shema..jpg 300w, https://remontcap.ru/wp-content/uploads/2015/05/shema-1024x353.jpg 1024w" sizes="(max-width: 666px) 100vw, 666px">!} 
Using a notched trowel, apply a layer of adhesive, and then glue 4 tiles. This will help to draw the desired plane. Until the glue has set, the plates can be adjusted one to another to achieve best result depending on the curvature of the ceiling and the characteristics of the material itself. The first four is glued along the drawn line, and the second one is next to it. The remaining tiles must be glued first lengthwise, then widthwise.
Jpg" alt="Gluing ceiling tiles" width="526" height="393" srcset="" data-srcset="https://remontcap.ru/wp-content/uploads/2015/05/potolochnaya_plitka_pokleika..jpg 300w" sizes="(max-width: 526px) 100vw, 526px">!} 
The started row must be completed, otherwise you may end up with either a gap or a tooth. Before the glue dries completely, you need to observe the behavior of the tile in order to correct it before the glue sets. Foam plastic tends to bend, and to prevent the formation of a bump during work, it is worth using a rule or level. Many people are interested in whether it is possible to glue tiles onto whitewash or wallpaper with their own hands and what kind of glue to use? Yes, you can, if you use non-water-based glue, as it will wet the whitewash and it will fall off along with the tiles. To lay tiles in a diamond shape, you need to start from the center and work towards the edges. Next, trim the tiles in place and fit them along the edge of the wall.
Completion of gluing
Some people worry and cut the tiles close to the wall. This should not be done, as you can leave a gap of 1 cm to the wall. When gluing a baguette or
