How to get rid of scratches on windows at home. The best ways to repair and restore a PVC window sill How to repair scratches on a PVC window sill

Compared to conventional wooden windows plastic ones have some advantages. This includes thermal protection, high noise insulation, and low maintenance costs. And if we compare them only in appearance, then, unlike wooden ones, plastic windows more stylish look. Everyone has their pros and cons. The same goes for plastic windows, which still have certain disadvantages (read the article about the dangers of plastic windows). One of these disadvantages is the difficulty, and sometimes the impossibility, of removing scratches from them.

In order to remove scratches on plastic windows, you will need:

- flannel;

Wooden block;

Liquid plastic (for example, Cosmofen);

Marker for plastic windows;

Solvent 646.

How to remove scratches on plastic windows?

1. Wash the surface to be treated thoroughly with a wet sponge. Do not wet the sponge with detergents, as they can destroy the structure of the plastic. Afterwards, wipe the window thoroughly and dry. Wear gloves. With help soft fabric(e.g. flannel) eliminate small and deep scratches. To do this, you need to make a homemade roller for grinding. Take it wooden block, having a length of 15 cm. Attach several layers of fabric to the block or make a cotton layer - these actions must be performed so as not to further harm the plastic window in the future. Next, attach a piece of soft fabric to the resulting base. Take the homemade roller you have and sand the scratch on the window.

2. Take liquid plastic and use it to remove larger and deeper scratches on the glass. Liquid plastic (for example, Cosmofen) can be purchased from organizations that sell components for plastic windows. Since the solution contains acetone, you should be careful with it. You should take a piece of coarse cloth and apply a little liquid plastic and wipe the surface of the window in a circular motion. You do these movements until the desired result is obtained (until you get rid of scratches). Then wipe the plastic with a dry and clean cloth. Rags and fabrics used in work must be disposed of later.

3. Deep scratches can be removed using solvent 646. Take a piece of cotton wool and a damp cloth. Lightly moisten the swab with solvent. Rub the scratch with light movements. To prevent the solvent from corroding the plastic more than required, you need to slightly dissolve the plastic and immediately wipe it damp cloth. Repeat these steps until you get results. That is, constantly dissolve the plastic and immediately wipe with a damp cloth. Before you start using this strong solvent on a plastic window, first practice on regular plastic glass to understand how it all works.

4. Using a special marker, which can be purchased from organizations that sell components for plastic windows. Using a special marker, remove scratches from the laminated window (where the wood-effect film is glued). Clean the surface of the window and in one motion paint over the scratch along its entire length.

Plastic in modern world surrounds us everywhere, be it car panels, window sills, sunglasses or mobile phone. The distribution is due to the fact that it is light in weight and easy to handle. Nevertheless, it is susceptible to damage, so sooner or later the question arises of how to remove scratches from plastic on this or that thing.

Most often, damage can appear on car parts, for example, the dashboard or doors, this may be due to the careless placement of keys, phones and other objects on it. It's also quite easy to scratch glasses that have a plastic base when they are carelessly placed on a table or in a bag.

How to remove scratches from glossy plastic at home

To remove scratches on plastic, use one of the following express methods:

Apply a few drops to the damaged surface machine oil, then thoroughly polish it using flannel cloth. It is worth noting that the plastic should not be painted, otherwise this type of polishing is unlikely to give significant results.
An indispensable product in every household is GOI paste; it can also help in solving this problem. It is enough to apply it to the fabric and thoroughly rub the substance and the plastic base.

GOI paste copes with almost all scratches on plastic surfaces.

Good results are obtained by using special felt-tip pens that can mask a scratch on a painted surface; in addition, they can be used for this purpose textile paint. In conclusion, the damaged area must be treated with a paste containing wax.
Hardware stores have special dye, removing scratches on a glossy surface. It is applied to Right place using a thin brush or toothpick, and after drying, polish with a cloth soaked in machine oil.

If you cannot remove the scratch, try other methods:

Heating with a hairdryer. A fairly simple solution to the problem, hot air quickly levels the plastic surface and eliminates it from the smallest defects. Removing scratches occurs as follows:

remove debris and dirt from the part of the plastic being processed;
clean using sandpaper with a not too coarse mesh;
remove dust with a damp cloth and degrease the surface;
then heat the plastic by pointing the hairdryer turned on at it to a temperature of 300 degrees;
it is important to move the device in the direction of the scratch, without stopping in one place, to prevent streaks from appearing;
when the surface heats up, leave it alone for 15–20 minutes;
Finally, priming and painting of the plastic element is required.

Polish using a special product that can be purchased at an automotive supply store.

First, clean the areas where the scratch is located using a soapy solution.
Dry the element.
Apply the paste using a sponge and leave to act for the period specified in the attached instructions.
After waiting for the paste to acquire a light shade, proceed directly to polishing. Permitted to use as special device, and ordinary sandpaper;
After shaking off the dust from the surface, evaluate the result of the work.

Pencils used to paint over scratches on a plastic surface can fill in the damage and make them invisible to the eye:

first carefully select the shade of the pencil so that the scratch becomes truly invisible;
then wash the plastic and dry it;
Now shade the scratch with a pencil, and after drying, remove the excess and polish the surface.

How to remove deep scratches on plastic

To remove deep scratches on plastic that completely ruin appearance any thing:

melt a small piece of plastic that will be exactly the same as the area being repaired;
dissolve it in White Spirit;
now that the substance has taken liquid form, rub it into the crack;
Finally, polish the surface.

Special products hide deep scratches.

Large damages on the plastic base can be removed by applying special remedy Displex, which is sold in hardware stores, packaged in tubes. It is worth noting that this substance contains microparticles of a plastic nature, so they most accurately fill deep scratches and make them invisible to others.

This tool should be used as follows:

apply the paste to the scratch using a cotton pad, flannel or other cloth;
rub the product in, making circular movements, for 2 minutes;
If the scratch does not disappear after one procedure, repeat the manipulations several more times.

As a rule, Displex copes well with deep damage, but in the case when all influences are ineffective, it makes sense to turn to specialists. For example, if the scratch is inside the car, use a special damage removal service that most car washes offer.

How to remove scratches on a plastic window sill

COSMOFEN 10 perfectly restores the shine of glossy plastic surfaces.

A plastic window sill, of course, is in many ways superior to its wooden counterparts, but scratching it is easier than ever. There are often cases when damage is caused by awkwardly moving flower pot or the housewife who cleans it using a stiff-bristled brush. It is worth noting that scratches can become a source of additional dirt that gets into them, and removing it will not be too easy.

Of course, ideal option will complete replacement window sill to a new one. But if this method does not work, try to remove the damage yourself:

Using sandpaper you can remove all uneven surfaces from the windowsill.

if processing is expected minor scratches, then you can immediately apply this product to them;
in cases where deep damage requires removal, their surface must first be cleaned sandpaper.

It is worth noting that waxing gives excellent results because he tolerates it well Sun rays and water. It also has the ability to repel dirt, protecting the surface of the window sill.

How to remove scratches from clear plastic

Transparent plastic is no less susceptible to scratches than matte or colored plastic. As a rule, there may be many objects in the house that have a surface made of such plastic. Quite often the plastic lenses of glasses, most often sunglasses, get scratched. It should be noted that such damage can impair vision and simply make their use uncomfortable.

Small scratches on transparent plastic are removed using improvised means:

Polish for jewelry. Apply to glass and then polish with a microfiber cloth.
Mixing Vaseline and wood polish can remove scratches from clear surfaces. It is important to continue polishing until all traces of Vaseline have disappeared.
The paste works well to remove scratches from computer disks, it is applied to the surface of the glasses using a microfiber cloth.
Glass cleaner and glass abrasives do a good job of dealing with this kind of damage. In addition, they will perfectly help solve the problem of fogging.

Removing scratches from plastic surfaces- This is a task that every person faces sooner or later, because objects made of this material fill every home and the surrounding space. It is worth emphasizing that removing minor damage is quite possible at home, while deeper damage is best removed using professional products or help from specialists.

Especially if it is in a very visible place, it can bring you a lot of trouble. Most the best option, of course, change the window sill for a new one. But if the scratch is small and shallow, then you can try to remove it yourself. The method of window sill restoration depends on the type of PVC window sill and the depth of the scratch.

Rice. 1.

If you have a matte window sill and a shallow scratch, take very fine sandpaper with a grit of at least 500-600 and, using gentle (preferably longitudinal) movements, sand the scratch area, but do not rub the film to the dark base of the window sill.
If you have a glossy window sill and a shallow scratch, do the same and at the end treat with a cleaning agent PVC profiles"COSMOFEN 5" - this will add shine to your window sill.
If you have a deep scratch, I can advise you to do everything as in the first tip. Then treat the scratch area with COSMOFEN 10 and then polish with COSMOFEN 5.

We must warn you that you need to be very careful with "COSMOFEN 5" - it is a highly toxic and deep-acting product - it can strongly dissolve the surface. Cosmofen is intended for correcting plastic defects, but it is a very strong solvent, and without experience working with it, you can leave a lot of stains on the windowsill, and then you will definitely have to change the window sill. Therefore, it is better to try its effect on a piece of window sill or invite a specialist.

Rice. 2. COSMOFEN product

First, test it somewhere in an invisible place on the windowsill. Use a lint-free cloth, otherwise the lint will melt into the surface of the window sill.

Rub the scratch in one direction, without fanaticism. Don't overdo it!

For a shallow scratch, 1-3 times are sufficient.

This will clean the scratch from dust and slightly dissolve and level the scratch relative to the surface of the window sill.

If your window sill is initially covered with film, then only gluing a new film, preferably acrylic, will do.

Acrylic film is the most durable, although it is more expensive.

You can try to smooth out scratches with Farecla liquid polishing wax, a substance that is absolutely harmless to plastic. Minor scratches You can polish it immediately, and deep ones, together with the adjacent area, can be polished after processing with fine-grained sandpaper. Dampen a cotton cloth with wax and rub it over the damaged surface in a circular motion with gentle pressure. Once it dries, polish it with a special cloth, preferably from the same company that produces wax. The wax coating does not evaporate, does not react to direct sunlight, is not wetted by water, and repels dirt.

Everyone has a lot of plastic things in their apartment, often for daily use. For example, this could be a refrigerator, kettles, blenders and other items household appliances, phone housing, and car showrooms. Due to the fact that these things are used quite often, scratches, sometimes deep, appear on the plastic from prolonged use. However, no need to worry, there are some tips on how to remove scratches from plastic effectively and affordably.

Today you can find a large number of products that will help eliminate scratches and microcracks on the surface of objects made of plastic. The most common means are considered to be polish, which removes damaged areas on plastic; special pencil; crack filling paste. However, they only work when the scratches are not deep.

You can fix small cracks yourself using polishes designed for car body treatment. The polish can be coarse (that is, its texture has an abrasive property), as well as finishing (in this case, the texture is quite soft and silicone). It is best to choose only a finishing polish for household plastic items, so as not to cause even more damage to the coating that you want to restore.

How to remove scratches in a car interior?

You can fix scratches on the plastic inside the interior of your car yourself. The choice of tools depends on the degree of damage and type of coating, including a hair dryer, polish, pencil, and if none of the proposed options helps, then major renovation details.

Hairdryer

You can perform the following steps using either an ordinary hair dryer, which is used to dry your hair, or a construction hair dryer. During this procedure, the plastic will heat up, and the damage will heal on its own, due to the fact that it will melt somewhat.

Before starting work, wash the part well with detergents.
When it dries, you should turn on the hair dryer (it is recommended to use minimum power), and then send to problem area, requiring restoration.
If you do not notice that any changes have occurred, increase the power so that under the influence of temperature, the plastic surface melts a little.
Never keep the tool in one place because you risk overheating the plastic.

Note! You can touch the restored part with your hands only after it has completely cooled down.

Polishing

Wear rubber gloves and wash everything with detergent. Places where dirt and dust have accumulated require special attention.
Then you need to dry the area you are interested in.
Next, you need to apply a paste with abrasive properties to the microcracks using a small foam sponge. Be careful! For better effect of the polish, wait a little time, as is usually indicated in the instructions for use.
Wait until the polish becomes white, and begin the polishing procedure.
Moving in a circle, it is necessary to clean off excess abrasive, from time to time removing the resulting amount of dust.
After this, wash the coating.

Masking pencils

This method is the fastest and easiest to eliminate cracks inside the car, as well as those that can be found on the bumper of the car. Pencil High Quality usually has a high cost, but it is quite economical and effective remedy. In order to carry out the procedure, you need to perform the following steps:

Clean problem areas from dirt and dry.
Use the point of a pencil to fill in the damage.
Wait for the surface to dry.
You can then remove any remaining product and begin polishing. This should smooth out the transitions between the restored area and the rest of the coating.

Major interior repairs

Painting is the most complex and time-consuming method of restoring such surfaces. However this option It will definitely be effective and help hide existing shortcomings.

The element requiring restoration must be washed thoroughly and dirt removed using detergents.
Next, you must sand the damaged area, however, if the panel is embossed in its structure, then this step should be skipped.
If it is smooth, you can start sanding using special equipment or improvised means (sandpaper is often used).
Then a special primer is applied to the prepared coating, which is produced in the form of spray cans. It is necessary to select a composition that will not react with the surface.
Once you have applied several layers of primer, the plastic needs to be polished using an abrasive until it is perfectly smooth.
If there are large cracks in the panels, you need to fill them with putty.
When you're done renovation work, the coating should be coated with appropriate paint.
If necessary, plastic panels They can also be treated with varnish, but this can cause glare, which sometimes makes it difficult to control the car.

Cracks small size are removed using the following means:

Abrasive products for polishing glass surfaces. Such products are also often used by artists, and they are the only way to eliminate all scratches rather than mask them. Among the ingredients included in such abrasives you can find hydrofluoric acid, so under no circumstances use them on parts that are not made of plastic.
Glass cleaning products. If you want to remove a scratch on a plastic item, use a glass cleaning product, such as that found in a car. It should be applied to the coating and polished using dry wipes. This option will help get rid of small cracks.
Wax. Wax is suitable for effective polishing of plastic surfaces. It is enough to apply a little product to a piece of dry soft cloth and rub the plastic, moving in a circle. Remove excess with dry wipes or a cotton swab.
In addition, a polish intended for processing is sometimes used wooden products, mixed with Vaseline. You need to buy products used to polish wood at the appropriate point of sale and treat the problem area with it, mixing the product with a few drops of Vaseline. This product fills the damaged area and makes it less noticeable. Polishing must be continued until the Vaseline is completely wiped off.
Also, you can use products for computer equipment, which are most often used to treat disks, because this way you can remove worn areas and small microcracks. Apply the product to the plastic coating using a soft fiber.
Polishes for silver and copper will help you, which should be applied to the problem area and wiped with dry wipes or a piece of fiber cloth. This process should continue until you get rid of all the cracks.

Repairing scratched glass can be as easy as pie with some toothpaste and a little effort. The only question is whether it should be restored or better replaced. Not only does the glass restorer create a rainbow effect on the glass, but scratches reduce the strength of the window, leaving it vulnerable to cracking with just a light pressure on the desired spot.

It’s already upsetting that you can feel a scratch on the glass with your fingernail; it’s probably also so deep that it won’t be possible to fix it without leaving a trace. Polishing kits can leave an indentation with bubbles that refract light when the sun shines through the window. Depending on where the window is located, this could be a problem for you. If the scratch is located right in the center of your bay window, it will usually need to be replaced.

Working with minor scratches

For scratches that can be seen in the sun but cannot be felt with a fingernail, toothpaste - The best decision Problems.

Toothpaste is the best solution to the problem of scratches on glass

Paste or cream works much better in this case than gel. Clean the glass thoroughly. It is better to clean the surface with a lint-free cloth. Apply a generous amount of toothpaste along the entire length of the scratch and wipe off the excess.

If you use a razor blade to scrape off excess toothpaste, do yourself (and your window) a favor.

Make movements in one direction only. “Scraping” the glass with movements back and forth, across the glass, can cause irreparable damage!

After the window is dry, take a piece of soft cloth and polish your window. The scratch will disappear immediately, along with the toothpaste. Sometimes, you get scratches that are barely noticeable, but they still bother you. Take your time using the paste. First, try polishing the glass with furniture polish. Just be careful to avoid scratchy materials - such as newspaper - while polishing. The best choice for you it is a soft, dry cloth.

Medium scratches

Most window cleaning professionals will tell you that there is no need to repair scratches on your window. But if you run your finger over a scratch and your nail gets into the groove, then this means that the window is too damaged to be restored. And yet, for those persistent jack-of-all-trades, there is Possible Solution. A second treatment with toothpaste containing equal parts dry mustard and vinegar, and this mixture can fix scratches that are a little deeper. Apply toothpaste and polish with a clean cloth. If your scratch is still visible after sanding, it's time to move on to the next step - a professional scratch removal system.

Professional methods

Some scratch removal kits are sold both in online stores and in regular store. Auto glass restoration kits usually include everything you need to complete the task. Unfortunately, they can be quite expensive, and without professional knowledge, you may not be able to put them to good use. Look for products that do not contain abrasive ingredients. Cerium oxide and those that only scrape out scratches. The end effect is a reduction in the strength of your window. Home owners and their insurers will agree that it's better to replace a window right away than wait until it breaks.

Preventing scratches

Undoubtedly the most easy way taking care of a scratch is, first of all, hiding its presence.

Not all scratches can be fixed, but some common causes of scratched windows can be avoided, as follows:

Traces from construction - building mixture, putty and plaster, stick to the surface of the new window and, when cleaned off, create scratches. Some new products protect the window surface. They can be applied or sprayed onto glass at the factory, such films can be removed after construction is completed, and then the window simply needs to be washed.
Newspaper, hard towels and vigorous scrubbing can scratch the glass surface. Surprisingly, a diamond ring can do the same. Wash the window with a soft, clean cloth. If lint or streaks remain on the surface, use a lint-free towel and avoid wiping windows when the sun is shining on them.
Dirt or construction dust They can very easily scratch the window when you wash it. If possible, first rinse or hose off the dust from the window before washing it.

Windows create the overall impression by which your home is judged. Stained, cloudy, dirty or scratched windows give the wrong impression. Correct the feeling of neglect and upgrade your home by restoring or replacing damaged window glass.

Andiroba (Carapa) Family: Meliaceae Other names: crabwood (Guyana); crappa (Suriname); Figueroa (Ecuador); carapole (Guadeloupe); carapa (Guiana); Camacari (Brazil); Masabalo (Colombia). Distribution: Caribbean, Central and South America. Description of Andiroba wood The wood has a color from red to light red, darkens when dried. The texture is mostly smooth, however, sometimes intertwined with ripples in a denser fabric, creating a figure...

Amboyna (Narra) Family: Legumes Commercial names: rosewood (Philippines, Papua - New Guinea). The seedlings are sold under the trade name AMBOYNA BURR. Other names: red narra, yellow narra, sena, angsena. Distribution: East Indies. Description of Amboyna Wood The heartwood varies from light yellow, golden brown to brick red. Wood native to Cagayan is usually harder and heavier and blood red. Amboyna has...

Alon (Bombax) Family: Bombacaceae Commercial names: Kondroti, Alon-bombax. Other names: ogumalonga (Cameroon, Gabon); Akagauan (Coast Ivory); Kingew (Liberia); Mungura (Mozambique). Distribution: Tropical Africa. also in South America and South Asia. Description of Alon Wood The heartwood is pale reddish brown in color and is susceptible to fungal discoloration. The texture is straight-grained, rough, dull in appearance and very absorbent. Weight on average 550 kg/m3;…

Red Alder (Alnus rubra) Family: Betulaceae Commercial names: Western alder, Oregon alder. Distribution: Pacific coast of Canada and USA. Description of Wood Red Alder The wood is pale yellow to reddish brown in color. The texture is homogeneous. The drawings are muted. Weight on average 530 kg/m3; specific gravity.53. Mechanical properties A soft wood of medium density, with low bending and crushing strength. Impact resistance...

Alder (common) Family: Betulaceae Trade names: black alder (UK); gray alder (Europe); Japanese alder. Other names: Aune (France); eis (Netherlands); Erle (Germany); hannoki (Japan). Spreading: Northern Russia, North Africa and Western Asia, throughout Scandinavia and Japan, and throughout the United Kingdom of Great Britain. Description of Alder wood The color of the wood is dull, light reddish brown with darker lines...