Scotch tape is a tape with a layer of glue applied on it. Sometimes it can be one-sided or double-sided, quickly adhesive or weakly adhesive. It's just incredible useful thing in everyday life and construction, but after working with it you can sometimes encounter some problems. The most common are traces of glue on the material or remnants of tape. Very often this can be observed on plastic windows, and in order to remove the tape from the surface, sometimes you have to try very hard.
Nowadays you can find plastic in literally any room, as it is practical and quality material, but there is a lot of hassle in cleaning it. And to maintain the original appearance you have to make an effort. It is extremely important to approach the issue responsibly, otherwise you can cause irreparable damage to the window. But, knowing some secrets, you can easily cope with this task and not wonder how to clean plastic windows from tape.
Method No. 1
Of course, it is best to remove the tape immediately, since it will be incredibly difficult to remove the film without damaging the material. Therefore, it is much better to do everything immediately and promptly. This method can be used if traces of glue are still fresh. Place a new tape over the area where the tape remains, press it firmly, and then tear it off sharply. If you fail to deal with the contamination the first time, you can repeat the action. Or use an eraser and, following the principle of removing a pencil from paper, do the same with traces of glue.
Method number 2
For this method you will need something alcohol-based, vodka, cologne or pure alcohol will do. Soak a sponge or soft cloth in the substance, then wipe the contaminated area. But there is one important nuance: This can be damaging to some types of plastic, depending on the quality, so try it on an inconspicuous spot first.
Method number 3
Cleaners do a great job removing tape marks. Those in the form of a fine crystalline powder or paste are suitable. The substance is applied to a damp washcloth and the tape is removed using circular movements. You just need to rub very carefully, as you can leave scratches on the surface.
Gels or dishwashing detergents are also suitable; they are very easy to use and absolutely safe. Simply apply to a damp cloth.
You can also use the same product as for cleaning glass. Spray the stain and leave for ten minutes, after which you can wipe it off. Finally, wash the window clean water.
Method number 4
You can actually prepare the detergent yourself; to do this, you simply need to mix baking soda with water to make a paste, apply this mixture to the contaminated surface and leave for a couple of minutes, after which it is washed off with clean water. If there are still traces left, the procedure can be repeated. Thus, the question of how to clean plastic windows from adhesive tape can be solved quickly and using the means that any housewife always has at hand.
Method number 5
How to remove tape from plastic windows? If the material is not afraid of high temperatures, you can heat the plastic with a hairdryer or steamer. It is enough to heat only the edge so that you can grab it and carefully remove the tape, then warm the marks a little more and wipe with soapy water.
A more gentle method of heat treatment is hot compresses; to do this, you just need to heat water and wet a towel, squeeze it thoroughly so that water does not drip from it. And walk it over the tape; if necessary, the procedure can be repeated several times. Under the influence of temperature, the adhesive tape should come off, and it can be removed from the surface; if necessary, you can use additional funds, for example with a spatula.
Method number 6
How can you clean plastic windows from tape? There are also less budgetary, but more effective and convenient to use means. Modern market offers many products that are aimed at solving such problems. They are mainly made in the form of aerosols and are very convenient to use, for example, they do not flow down a vertical surface. After some time, the glue on the tape dissolves, and it can easily be peeled off from the surface. The same product can be used to completely clean the window, removing any remaining adhesive from the surface. Plus, by purchasing it, tape and any other stickers can be removed not only from plastic, but also from any other surfaces. And on top of everything else, the manufacturers promise that the composition will not harm the material itself, although they prudently ask to check the reaction in an inconspicuous area before use.
Method number 7
How to clean plastic windows from tape? You can use vegetable oil, it doesn’t matter which one, sunflower, olive or corn will do. Or various aromatic oils. In this case, in addition to good result You will also notice a pleasant smell in the room. Using a sponge or soft cloth, apply the substance to the plastic, then it should remain on it for 10 minutes, after which you can wipe it with a napkin or, using a soap solution, wash the frame. And finally wipe damp cloth. This is a very gentle method that will probably not leave any damage, and also unpleasant odor.
Method number 8
One of interesting ways is to remove the tape with toothpaste. To do this, you need to thoroughly wipe the surface and remove the tape. Apply toothpaste to the contaminated surface, hold for a while, and then wipe dry with a cloth. Then wipe the entire mixture with soapy water. The bonus when using this method is that it can help you get rid of not only tape and its traces, but also scratches. Therefore, there is an answer to two questions: how to clean plastic windows from tape and how to get rid of scratches on plastic
Method number 9
Purified gasoline or white spirit can help, but these substances should be handled with extreme caution, and the product should be applied to the surface to check. Then leave for about five minutes, if nothing changes, then you can treat the surface. For this soft cloth or cotton wool should be soaked in the substance and wipe the surface. Then go over the top with a dry cloth.
Method number 10
Sometimes you may find that some windows are already covered with tape. for a long time, and nothing helps to get rid of it in such difficult case. You have to peel it off in small pieces, which ends up taking too much time and leaving the surface very unpleasant and sticky to the touch. How to clean plastic windows from tape? There is a method that works great in such cases. In order to get rid of the tape, you will need a double-sided dish sponge, a spatula, and soap.
We take a sponge, which needs to be soaked in water, then squeezed thoroughly so that water does not drain from it, then soap it on the hard part laundry soap. Lather the surface thoroughly, then wait a little and, carefully prying it with a spatula, remove the tape; the spatula should be sharp to make it easier to peel off. Next, the question arises of how to wash off traces of tape on plastic windows. Simply use the same hard side of the sponge, making an effort, to walk over the remaining glue, carefully wiping everything off. Then wet the washcloth in clean water and wash off any remaining glue. In order to tear off the remaining tape, you will have to try. But this way you can gradually clear the entire window. Although it should be noted that this is a very labor-intensive task.
Removing double-sided tape
And if solving the problem of how to wash tape from a plastic window sometimes does not take much time, then with double-sided tape everything is much more complicated. Since it holds stronger than ordinary stationery, so first you need to warm it up with a hairdryer or steamer, then carefully remove it from the surface. A regular soap solution can handle the remaining glue, or any detergent will do. If they cannot remove the marks, then you can try using acetone. Apply it to a cloth and wipe thoroughly, then rinse with clean water. Also, if all of the above methods do not work, then you can try to remove the tape with purified gasoline; the one designed for refilling lighters will work well. But what should not be forgotten is the need to test this or that product on the spot where the damage will not be visible.
Substances that are prohibited to use
- Powders with a coarse crystalline structure, as they can damage the material and leave scratches on it.
- Acids - using such products is very dangerous. They can ruin appearance, even later the plastic sometimes changes color from snow-white to yellow.
Therefore, when considering how to clean plastic windows from adhesive tape, it would be more advisable to abandon the above mentioned means.
Kirill Sysoev
Calloused hands never get bored!
Content
Scotch tape is widely used in everyday life, but few people think before using it about the results remaining on the surface of the furniture. After removing the self-adhesive tape, sticky spots remain, which, if not eliminated immediately, attract dust and become dark with dirt. Such marks greatly spoil the appearance of furniture, refrigerators, dishes, car windows, window frames, doors and other household items. It becomes more difficult to completely remove traces of tape from plastic the more time has passed since the formation of sticky stains.
How to remove tape from plastic
Before removing stains from adhesive tape, take precautions so as not to spoil the appearance of products made from polymer material. It would be wise to first check the reaction of the chosen remedy to small area plastic in an inconspicuous place. There are a lot of means that can be used to remove adhesive from tape from plastic without damaging the surface. Both strong chemicals and home remedies are suitable. Proven methods for removing old tape stains from plastic surfaces:
- A strip of new adhesive tape is good for removing fresh residue from adhesive tape. During the procedure for eliminating the sticky layer from the tape, they act quickly. Movements during this procedure should be impetuous - a piece of adhesive tape is stuck and the glue is jerked off.
- Using a cloth soaked in hot water, you can easily remove fresh adhesive residue from the tape in 3-4 minutes without effort or harm to the plastic.
- A household steam generator can easily get rid of sticky marks. Action of hot humid air will help you quickly remove any leftover tape.
- Use a hair dryer or a hair dryer to remove both fresh and old stains from double-sided tape. To remove such residues, it is recommended to warm up the stained area for 3 minutes. After this, using a flat spatula carefully to avoid the risk of scratching the plastic surface, pry up the edge and remove the remaining adhesive tape from the plastic.
How to remove tape marks
A low-quality adhesive strip does not adhere well, and a good adhesive tape is difficult to remove after a while. various surfaces. Most people at least once in their lives have been faced with the question of how to remove adhesive tape from plastic so as not to spoil the appearance of the item. The choice of cleaning method depends on the availability of available household, chemical or professional product, as well as on the structure of the polymer material, from the surface of which sticky stains from the tape need to be removed.
Available means
Wipe traces of adhesive tape off plastic using vegetable oil, not necessarily sunflower oil; olive, linseed, sesame or other will do. This product is the safest for polymer surfaces. It is impossible to damage, scratch or discolor plastic with vegetable fat. Under the influence of oil, the glue is saturated and increases in volume; after 15–20 minutes, all that remains is to remove the contamination with a piece of cloth or a paper napkin.
To wash away sticky marks from adhesive tape, alcohol-containing products are suitable. If alcoholic drinks (vodka) are used, they should not contain sugars or dyes. The higher the strength, the easier it is to wipe off the glue, so medical alcohol is the most effective. A cotton swab is generously moistened with it, the area of contamination is treated, wait 3-5 minutes and wipe with a rag. Alcohol has a bleaching effect on polymer products; for this reason, it is strictly forbidden to use it on colored plastic surfaces.
Easily and quickly helps remove traces of tape from plastic baking soda. To prepare the mixture, a teaspoon or tablespoon of sodium bicarbonate powder is diluted with water to a mushy consistency. Dip a sponge into the prepared solution and rub the area of contamination with it. After it has been possible to clean off the remaining tape from furniture, windows or other interior items, the area is wiped first with a damp and then a dry rag.
An eraser can delicately remove sticky traces of adhesive tape from objects made of polymer material. Use an eraser to rub the stained area until any remaining glue disappears. At the end of the process, wipe off specks from the cleaned polymer surface. It is easy to erase stains from adhesive tape with an eraser if their area is small. Large areas of dirt take a long time and are difficult to wipe off with an eraser.
Chemical methods
White spirit, which is purified gasoline, has the properties of a mild solvent. This liquid is practically safe for a plastic surface, but it is better to check the reaction of the coating on an inconspicuous area. Do not use white spirit on painted or polished surfaces of interior items made of polymer material. Apply the stain with a swab generously soaked in gasoline until the stain is completely removed.
Acetone is an aggressive method for cleaning plastic surfaces. The colorless liquid can easily remove sticky tape marks, but can ruin the finish of furniture or other household items. Dull spots may remain on the plastic after treatment with acetone. But this organic substance, like nail polish remover, is safe for windows and is easy and convenient to clean large areas glazing that is dirty.
Based window cleaner ammonia Easily removes tape marks from plastic surfaces. To eliminate residue from adhesive tape, spray the product onto the stained area and wipe it off with a sponge. After the sticky traces have dissolved, the treated area is wiped with paper napkins. It will help car enthusiasts deal with tape residues on glass, metal paintwork or in the car interior. special remedy for car windows.
Vinegar is present in every home; it is often used not only for cooking, but also for cleaning space. It is also effective for removing sticky marks from tape. To remove dirt from a plastic surface, it is better not to dilute vinegar with water; in concentrated form it will act faster. Rub the sticky stain with a sponge soaked in vinegar until it disappears completely. At the end of the procedure, wipe the treated area with a damp cloth or napkin.
By heating
The glue eats deeply into the plastic surface, especially when the stain is old. In addition to acrylic, the adhesive base may contain rubber and other foam materials, such as double-sided tape. In such circumstances, before attempting to remove traces of adhesive tape from plastic using various means, the stains must first be softened.
A steam generator, household or construction hair dryer. The main thing is not to overdo it, especially when using professional heating equipment, so as not to deform the surface under the influence of high temperature. Hold the hairdryer or steam generator at a distance of 15 to 20 cm for about 3 minutes, periodically checking how much the dirt has softened.
Mellerud adhesive remover spray perfectly removes even residues double sided tape. A special cleaning product effectively removes glue stains from all surfaces, including polymer ones. To wipe off the remaining adhesive tape, moisten a rag generously with the product and moisten the stained area. Leave the solvent for 5-7 minutes and then clean off any remaining glue. After completing the procedure, wipe the treated area with a damp and then dry cloth.
Cleaner Scotch-Weld is a citrus-scented all-purpose aerosol cleaner designed specifically for removing any type of adhesive. A clear liquid mixture of petroleum distillates that is highly effective in removing adhesive tape residue on plastic. Before use, shake the canister, moisten a cloth with liquid and wipe the contaminated area. In the case of old stubborn stains from adhesive tape, the procedure is repeated several times.
Video
Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!More and more housewives are interested in the question: " How to remove tape marks?", since now it is used both in everyday life and in other areas of the economy. When moving, we are used to packing boxes with this particular adhesive tape; during renovations, we cover furniture with film and again seal it with tape, and what can we say about insulating windows in winter. But when The long-awaited spring is coming, we are trying to wipe off these terrible black spots on the glass, which are covered with a thick layer of dust and greasy soot.
For many people, these terrible black marks have already become a kind of “interior item”, since it is impossible to wipe them off with a washcloth and soap.
“How then to get rid of them?” you ask. In fact, dear housewives, I want to tell you that difficulties in removing sticky marks from tape arise from ignorance of some tricks. Therefore, you can consider that you have practically said goodbye to this problem. In this article, we will tell you all the secrets of removing those unfortunate sticky black marks using available means.
Scotch tape marks on plastic and glass: we remove them with improvised means
If traces of adhesive tape appear on plastic or glass in your home, there is no need to grieve, since this problem can be effectively eliminated using improvised means that every housewife has in her home.
Well, dear ladies, we suggest we begin our short excursion. The methods that we will tell you about below are great for removing traces of tape from plastic and glass.
1. Any vegetable or essential oil.
Any oil will work well for removing sticky residue, from scented essential oils to regular sunflower oil. In order to achieve maximum effect, you should:
- apply a small amount of apply the oil of your choice to cotton wool and thoroughly treat the contaminated area;
- leave the oil for 15 minutes so that the adhesive from the tape is thoroughly saturated with it and swells;
- when the oil breaks down the sticky residue, take a dry, clean rag and start wiping off the dirty stains;
- if after the first procedure it was not possible to completely get rid of the stains, then these manipulations can be repeated;
- At the end of the work, wipe the plastic or glass with a dry paper towel.
Another tip: be prepared for the smell of oil to “linger” in the room for a long time, so we recommend using essential oils to remove the tape. You will remove traces and enjoy pleasant citrus aromas.
2. Medical alcohol.
Alcohol will do a great job of removing tape residues and will remove the yellowish tint from the plastic. First, you need to do a little testing on an inconspicuous area, since the plastic can have different composition and density, so the reaction may also be different. To remove sticky marks, you need to moisten a small piece of cloth with alcohol and gradually wipe off the contaminated areas on glass or plastic. This procedure should be carried out until the sticky residues completely disappear.
3. Scotch.
It’s not for nothing that people say: “They knock out a wedge with a wedge!” The tape itself will cope perfectly with the problem of sticky residue on plastic or glass. Carefully place a new strip of tape over the old marks, then quickly tear it off. You may need to repeat this procedure several times, but believe me, you will be pleased with the result.
It’s best to start with this advice, but if it doesn’t help you, then move on to the method with vegetable oil and ethyl alcohol.
4. Cleaners.
Now on the shelves of hardware stores there are many products that are designed for cleaning glass. You can use a spray if the contamination is minor. If the traces of tape on the glass are very noticeable and already black, then you cannot do without special cleaning pastes that have abrasive properties.
To effectively deal with this problem, you need to:
- before starting work, be sure to wear rubber gloves, since these are chemicals that can cause an allergic reaction;
- apply a little abrasive paste to the sponge and begin to wipe off the remaining tape from the glass;
- periodically rinse the sponge to remove paste and sticky components that have already been removed;
- At the end of the work, thoroughly rinse the glass surface and wipe dry.
The use of cleaning pastes is not suitable for removing traces of tape from plastic, since abrasive particles can easily damage it and leave small scratches.
5. Stationery eraser.
You won't believe it, but a regular eraser can work a miracle and remove even the oldest tape marks! Sticky spots are removed like failed drawings in a sketchbook, and dirty marks, or rather, sticky pellets that will remain after treating the contaminated area with an eraser, can simply be wiped off with your hand.
The eraser method for removing tape is ideal for plastic windows, and for glass, and for furniture, and even for various electronics. But if the “affected area” is large enough, be patient and strong.
6. Hairdryer
The adhesive from the tape eats into the plastic surface almost tightly. Therefore, traces of it must be removed immediately after they are discovered. Otherwise, under the influence of direct sunlight, the adhesive from the tape and the plastic may simply become akin.
You can try using a hairdryer on the areas where there are remaining tape residues. Under the influence of hot air, the glue will soften a little, and it can be easily removed with a dry cloth or rubber spatula.
Without a hairdryer, it is simply impossible to remove the remnants of double-sided tape, since it contains rubber and other foam materials that stick tightly to any surface.
But it must be used very carefully, because not any plastic will withstand high temperatures and does not deform.
7. Baking soda.
Our common problem Regular baking soda can resolve this. To do this, prepare a slurry that will have the consistency of very thick sour cream. Carefully apply the resulting paste to the sponge and begin to remove traces of tape. Before using baking soda, you can slightly warm up the sticky spot with a hot blast from a hairdryer. Finally, thoroughly rinse the plastic or glass surface.
8. Nail polish remover or acetone.
Each of you probably has a similar product in your purse. Believe it or not, it does a great job of removing tape marks on glass. It is not recommended to use such a solvent on plastic, since the surface may become covered with cloudy spots.
9. A universal remedy.
Now on sale there are universal “Label Remover” products that are designed to get rid of traces of adhesive tape. Proceed according to the suggested instructions, and you will forever get rid of dirty traces of adhesive tape on plastic or glass.
10. Wiper.
The special glass cleaner that your husband uses in the car can also help you remove traces of tape from a plastic window:
- spray the product onto contaminated areas;
- leave for a while, periodically spraying the stains as the product will drain;
- Now wipe the glass with dry paper.
Ready! There was not a single trace left of the tape!
11. Special pencils.
It happens that there are a lot of tape marks on the refrigerator. This happens when your child immediately puts on him new stickers that he came across in yogurt or corn sticks. You have to mask such traces with magnets, and then your refrigerator turns into a “honor board” of who, where and when you vacationed.
You can apply the above methods, or you can purchase it in a store household appliances special pencils that will help remove traces of tape on the refrigerator or washing machine, and also clean them. Such products are suitable for glass, plastic, tiles and ceramics.
12. Special product for removing tape and stickers.
Have you just found traces of adhesive tape on your linoleum and nothing we have suggested has helped you? Don’t be sad, dear housewives, because this problem can be solved. Take a walk in hardware store yourself or ask your husband and buy a special sticker remover "Profoam 2000". It copes well with the problem of glue marks on plastic, linoleum, leatherette, and glass.
While in such stores, ask consultants about new products that you may need in your everyday life.
13. Drill.
How can you remove tape marks using a drill? Can! We will tell you about this method only when you call your husband for help.
A drill with a rubber tip acts like an eraser, only much faster. This method will quickly remove traces of tape from any paintwork or plastic coating. You should take on this work only when you are confident in your abilities, because lack of experience can easily damage the surface.
You see! Still, it is possible to get rid of dirty sticky traces of adhesive tape. It is important to understand which method can be used on a particular coating. Now you too will get rid of unsightly “interior details” on your window or refrigerator, like dirty traces of adhesive tape.
Removing sticky tape marks from furniture
For days now you have been racking your brains over how to remove sticky traces of tape on furniture without damaging it. Now stop thinking about it because we have a few for you. effective ways that will help effectively solve this problem.
|
How to remove traces of tape? |
How to use? |
|
Solvent |
From any lacquered furniture A regular solvent will help effectively get rid of traces of adhesive tape. We would like to warn you in advance that you should not overuse it, as it can leave stains and clouding on the varnish of your furniture. Be sure to check for a reaction in an inconspicuous area. Let's get started:
Make sure the room is well ventilated in advance. Since any solvent has a very pungent odor. |
|
Hairdryer + vegetable oil |
Before removing tape marks from your furniture, heat the stained area with a hairdryer. After that:
|
|
Essential oil |
Essential oil, which can be found in any pharmacy, will effectively destroy traces of glue. It contains organic acids, which are special effort will destroy the adhesive properties of the tape. It is enough to treat the sticky area with a napkin containing essential oil, then wipe with a dry cloth. |
|
Detergent + hot water |
Add to very hot water any detergent and lather well.
|
|
Acetone |
If traces of tape are present on upholstered furniture, they can be removed with acetone. It is enough to moisten a small piece of cloth with it and rub thoroughly soft upholstery. Then wash off the residue with soapy water and dry with a towel. |
And you were worried. Everything turned out to be much simpler. You can even remove tape marks from the upholstery of upholstered furniture. Nothing is impossible, believe me, dear ladies! Now you will never be scared by a new sticky spot, because from today you know all the tricks with which you can remove any traces of tape on furniture!
How to remove dirty traces of tape from clothes?
There are cases when dirty traces of tape appear on clothes, so many housewives are interested in how to remove them.
You can remove such stains using a solvent, acetone or alcohol. To do this, generously moisten a cotton pad with any of the products and place it on the stain. Leave for 15 - 20 minutes, then gently rub off the dirt.
If after the first attempt the stain does not disappear, you can repeat the procedure again. After several such manipulations it will definitely disappear. Be sure to wash your clothes after this to get rid of the unpleasant smell of the solvent.
Vegetable oil will not work for removing traces of tape from clothes. This will only worsen the situation, and in addition to the dirty stain, a greasy stain will appear.
Before you start removing stains, carefully study the labels on your clothes: maybe your favorite T-shirt should not be exposed to solvent or acetone.
If the use of the suggested remedies does not “move” the sticky stain, try disposing of it with tape. Stick the strip on the sticky spot and quickly remove it - the new tape should “take” the old residue with it.
This is where I would like to end today’s article. We hope that these recommendations will make your life much easier, and you will be able to deal with traces of adhesive tape both in the house and on clothes without much effort.
Traces from peeled tape can remain on glass, plastic, paper or fabric. Debris, hairs, hairs, and dust instantly stick to the transparent strips of glue, which makes the appearance of the surface unpresentable. Such sticky residues are also unpleasant to touch, since the skin also sticks to the glue. To remove tape marks, follow the tips below.
How to get rid of tape marks on plastic using store-bought products
If the area covered with glue residue is large, you can purchase a special tape remover. Such household chemicals contains various solvents. Therefore, the product is applied to a cotton swab, which should be used to wipe off the glue.
To avoid paying for a brand, you can simply purchase any solvent, acetone, or nail polish remover without acetone and wash off the glue in the same way. Before choosing one of the listed products, it is necessary to test the surface to be washed. Not all plastics and tolerate contact with solvent without consequences. Therefore, it is worth dropping a little product on the surface and observing the reaction.
An excellent solution for removing tape marks is alcohol. Vodka will not help in this case. If you apply alcohol to a cotton swab and wipe the contaminated object, the glue will dissolve without scrubbing. If all of the above remedies do not help, you can try to wash off the remaining glue with antistatic agent or aviation gasoline.
In any case, you need to start cleaning off traces of adhesive tape as early as possible, without allowing it to dry out. The older the glue, the more difficult it is to clean. .jpg)
How to wash off tape: improvised means
Not everyone knows that you can easily get rid of tape marks using vegetable oil. You just need to apply it to the remaining glue and leave for half an hour. After this time, all that remains is to wipe the area to be cleaned dry.
Alternatively, you can use regular soap and a sponge. Depending on the delicacy of the surface, the contaminated area should be rubbed with a soft or hard sponge in a soapy solution. The glue will simply roll into pellets in the soap suds.
If your clothes are stained with glue from adhesive tape, you can get by with regular washing in the washing machine. There will be no trace of stains if the glue was fresh. Alternatively, you can cut a strip of tape, stick it on the dirty area and tear it off sharply. It is necessary to repeat this procedure until all the glue is on the tape. If the glue from the tape has dried, can I use alcohol? it will not harm the paints on the fabric. Acetone and solvents are not recommended for cleaning fabrics.
You use adhesive tape when transporting furniture - you “fix” the doors of cupboards, cabinets and bedside tables with it. This ribbon is very reliable and usually does not fail. But when the furniture has already been transported, an unpleasant surprise awaits you. Suddenly it turns out that it’s not at all easy to wipe the sticky miracle off your nightstands. And even if it succeeds, you will still have to suffer with the remaining sticky spot. So how can you remove tape from furniture without leaving any traces? Now you'll find out.
Regular gasoline for lighters - great way get rid of the sticky tape:
Just take a piece of cloth and soak it generously in lighter fluid.
Walk through the “remains” of the tape.
Rinse the vacated area with warm water.
Wipe dry and that's it.
But we warn you: the stink will still be there, so the method is effective, but not without flaws.
Very important! Use gasoline very carefully, especially with polished and varnished surfaces. If you leave the “fuel” on them for too long, it will become so ingrained that you can’t remove it later. Well, perhaps together with polishing.
White spirit solvent glue also works well to remove tape. The removal method is the same as with lighter gasoline.
Eraser
The eraser not only erases various pencil smudges - it can also clean the places where you had to glue the tape without any problems. Do it in this way:
Take an eraser and hit the remains of the sticky miracle until you turn blue.
Then “polish” with a dry cloth, and that’s the end of it.
The method is excellent, but quite long - you just need angelic patience to completely remove the Velcro.
The oil perfectly removes stickiness from polished and painted surfaces:
Dampen a clean cloth with oil.
Rub the sticky spot thoroughly.
Do not touch for 20 minutes until the sticky spot gets plenty of oil and begins to break down.
Rinse with polish and clean with a spatula.
Wipe with something dry (a paper towel will do) and say a long-awaited goodbye to the sticky miracle.
The disadvantages of this method are the same stink. Plus, if the surface is untreated wood, it is dangerous to rub oil on it - greasy stains may remain.
You can also wash away sticky marks with essential oil, which is sold in any pharmacy. But even after it the smell remains. True, it is much more pleasant than the aroma of sunflower, which will please only fetishists of this plant.
Soda
To remove sticky stains from furniture, regular soda is enough:
Prepare baking soda and dilute it in water to form a paste that looks like sour cream.
Apply “sour cream” to a sponge and rub it over the sticky spots.
Rinse and dry.
Hairdryer - for furniture plastic
Scotch tape can remain embedded in plastic almost forever. It's all to blame Sun rays- they literally “crown” the adhesive substance with plastic surfaces, making them one whole - it becomes almost impossible to wash off stains. But there is salvation and its name is a hair dryer. Yes, yes, the same one you use to dry your hair after a shower or shower. Just:
Warm up the sticky spots with a hairdryer (to soften them, hot air is best).
Then introduce a tampon soaked in the same vegetable oil. Rub it thoroughly onto heated sticky spots.
Remove the oil with soap and that's it.
Important! Furniture plastic does not always cope well with the attack of hot air vapors. If it is not of very high quality, yellow, difficult-to-remove stains and even deformations may appear. To hide them, you will again have to glue something on top: film, wallpaper... well, what is not decor in general?
Tooth powder - for chipboard furniture
You won’t have to worry too much about tape stuck to chipboard furniture. Regular tooth powder and shaving foam (or any half-decent dishwashing detergent) will suffice:
Mix tooth powder with foam.
Apply with a sponge to the remaining tape.
Wait (literally a couple of minutes) until the adhesive stain begins to liquefy.
Take a damp sponge and carefully remove the liquefied glue without pressing hard.
Acetone - for upholstered furniture
The easiest way to remove adhesive substances from upholstered furniture is with acetone:
Apply it to the sticky area.
Dampen a cloth with detergent or regular soapy water.
Wipe away any remaining tape.
Finally, go over with a dry cloth to completely remove the marks.
Abrasive paste - for glass
If there are traces of sticking on the glass of a sideboard or buffet, then it will be difficult to do without abrasive pastes. So:
Be sure to wear rubber gloves, because after all you will have to work with chemical- abrasive paste. It's better not to get it on your skin.
Take a sponge and apply a little paste on it.
Rub the sponge thoroughly over the remaining tape. Attention! Be sure to clean the sponge from time to time (with regular rinsing) from sticky particles and “used” paste;
Finally, rinse the glass thoroughly and wipe dry.
Important! Abrasives are only safe for glass. They easily damage, rough, and scratch other surfaces.
Drill - for double-sided tape
Double-sided tape can be a real headache. It contains rubber and some other foam materials, thanks to which double-sided tape literally sticks tightly. But you can still remove the sticky material. To do this, you need to buy a special rubber attachment for the drill. Outwardly, it resembles a regular eraser and is designed specifically for removing particularly sticky substances. The nozzle does not pose a great danger to furniture. And you won’t need angelic patience, as in the case of a “manual” eraser - a drill will deal with sticky stains in no time.
All-purpose label remover and dishwashing detergent
If you don’t want to be fooled, the advice is simple - buy in a store universal remedy against labels. It will remove traces of tape, but you’ll really have to fork out the money.
Here, watch a video about one interesting “station wagon”:
Well, if you want it to be cheap but cheerful, just use regular dishwashing detergent. Do it like this:
Add dish soap to hot water.
Using a cloth or sponge, apply the resulting mixture to the sticky stain.
After just a couple of minutes, the glue will liquefy and you can easily remove it with a regular dry cloth.
But be sure to keep in mind: this method is simple, but not always effective. As they say: breaking is not building, gluing is not tearing...
The tape is wiped off with tape. This is not a joke at all. Just:
Place a strip of masking tape over the remains.
Tear it off sharply.
If necessary, repeat the procedure a couple of times.
There will be nothing left of the adhesive tape at all.
Our congratulations! Now you finally know how to get rid of the sticky stuff. It's time to take out a bottle of scotch from the bar cabinet and drink a couple of sips to defeat its sticky namesake.
