Homemade machine for producing cotton candy. Homemade machine for making cotton candy at home How to make a machine for cotton candy

We will show you how you can make cotton candy at home and make a device for it with your own hands from regular fan. To work, we will need 2 CDs, cut out two “washers” from them:

They are made easily and simply, you put something round on the disk, for example a coin, and trace it with a marker. After that we heat it up stationery knife and easily cut out all the excess. A hole in the center can be made using something also heated on the stove.

To begin with, we take the remaining disk we have and glue our washers to it, we need to do this strictly in the center, if we neglect this rule, our disk will vibrate, and in the end nothing will work.

Our attachment for the production machine cotton candy ready, now let's move on to the fan. Lay it on the floor and remove it protective cover, then remove the propeller. Take the middle box and make a round hole in its bottom:

Our machine for making cotton candy ready, as you can see, everything is done with your own hands, very simply and at home. Now all that remains is to prepare the syrup.

DIY cotton candy machine

It is done very simply, put a large metal mug of water or a small saucepan on medium heat, add 50/50 sugar and water, mix everything thoroughly. The syrup will be ready when a yellowish tint appears, but under no circumstances should it be dark brown. Now you can proceed directly to making cotton candy, turn on our machine and begin pouring syrup into the “disc” in small drops:

The result is excellent cotton candy, no worse than the one you could try in parks and at public events. After making cotton candy, the fan is easily put back together.

Video on how to make a cotton candy machine with your own hands:

Backup video lesson on how to make a cotton candy machine at home with your own hands:

Do-it-yourself cotton candy making machine

We are pleased to present you with the drawings of the device and the technology for preparing “FESHMAKA”. It won’t take you much time to make a simple device for preparing it.
Feshmak is a caramel-type product, popularly called “cotton candy”, usually in the form of a bundle of elongated thin white threads.
One kilogram of sugar produces up to 80 servings of the finished product.

The simplest design for preparing feshmak at home with a capacity of approximately 160 servings per hour consists of a 220 V electric motor with a power of 50 to 300 W with a rotor speed of 1250 - 1500 rpm and a disk made of sheet aluminum with a diameter of 170 - 180 mm and a thickness attached to its shaft 0.2 - 0.3 mm. To make a disk, you can use tin from tin can from under the herring. At a distance of 350 - 400 mm from the center of the disk, a fence made of plastic, linoleum, etc. is installed.

Homemade cotton candy

P.
If you seriously decide to start making a feshmak, we recommend using the design shown in Fig. 1.
For its manufacture it is necessary to use materials specified by GOST for the food industry.

Rice. 1
1- electric motor;
2 - working disk;
3 - container made of material recommended by GOST;
4 - bushing;
5 — stand on wheels (4 pcs.)

Rice. 2
Apparatus for preparing “feshmak”:
1 - electric motor;
2 - power cord;
3 — disk fastening bolt;
4 - the resulting layer of cotton candy.

Note.

The design of the device we propose reflects only the basic principle of the production of “cotton candy”; it is elementary and easy to manufacture. If you wish, you can improve the device yourself by mechanizing some of the manual labor.

Method for making cotton candy.

First you need to prepare the caramel mass. It is prepared without making molasses, which simplifies the cooking process. The mass is not candied due to the formation of invert sugar under the influence of vinegar essence added in the middle of cooking. So, in small quantity water (about 3 parts sand to 1 part water), dissolve granulated sugar and boil for 10 minutes, after which vinegar essence is added (3 ml of essence per 1 kg of sugar) and the mass is boiled again for 10 - 12 minutes. After this, the mass is heated over very low heat for 25 - 30 minutes. until a strong caramel sample is obtained with a moisture content of 1.5 - 1.7%. Humidity is determined by the boiling point of the mass. At the beginning of boiling it should be 100 - 105?, and at the end - 135 - 145?. Without allowing it to cool, pour the finished mixture in a thin stream onto the edge of the rotating disk (2 - 4 mm from the edge). To do this, it is convenient to use a small enamel ladle. Hot syrup, breaking into thousands of thin threads, hardens at room temperature, forming a layer of “cotton wool”.
At high humidity ambient air cannot obtain the product High Quality. In this case, you can close the device with a lid with a hole for pouring caramel mass. Turn off the electric motor and separate the threads from the body. Cut the finished product along the diameter line and roll the resulting semicircle into a tube on the table. Do the same with the second semicircle. Then cut the cotton wool into required quantity servings. The product must have White color and a pleasant sweet taste. When using food coloring, the product takes on a more attractive appearance.
To maintain the high quality of the “cotton wool”, it is necessary to clean the disk from adhering syrup after each working cycle. Feshmak cannot be stored for a long time. outdoors- this is its significant drawback. Sealed packaging and refrigeration will keep it for a day or more.
Do not despair if you are not satisfied with the quality of the product the first time. The main condition for success is the accuracy of each operation.

This material was taken from the site http://freeseller.ru

We present to you drawings of a homemade machine for making cotton candy(“Feshmak”) and the technology of its preparation. You won't need much time to make it.
Feshmak is a caramel-type product, popularly called “cotton candy”, usually in the form of a bundle of elongated thin white threads.
One kilogram of sugar produces up to 80 servings of the finished product.

The simplest design for preparing feshmak at home with a capacity of approximately 160 servings per hour consists of a 220 V electric motor with a power of 50 to 300 W with a rotor speed of 1250 - 1500 rpm and a disk made of sheet aluminum with a diameter of 170 - 180 mm and a thickness attached to its shaft 0.2 - 0.3 mm. To make a disk, you can use tin from a herring can. At a distance of 350 - 400 mm from the center of the disk, a fence made of plastic, linoleum, etc. is installed.
If you seriously decide to start making a feshmak, we recommend using the design shown in Fig. 1.
For its manufacture it is necessary to use materials specified by GOST for the food industry.

Drawings of a machine for producing cotton candy

Rice. 2 Apparatus for making cotton candy “feshmaka”:
1 - electric motor; 2 - power cord; 3 - disk fastening bolt; 4 - the resulting layer of cotton candy.

Note.

The design of the apparatus we propose reflects only the basic principle of the production of “cotton candy”; it is elementary and easy to manufacture. If you wish, you can improve the device yourself by mechanizing some of the manual labor.

Method for making cotton candy.

With high ambient humidity, it is impossible to obtain a high-quality product. In this case, you can close the device with a lid with a hole for pouring caramel mass. Turn off the electric motor and separate the threads from the body. Cut the finished product along the diameter line and roll the resulting semicircle into a tube on the table. Do the same with the second semicircle. Then cut the cotton wool into the required number of servings. The product should have a white color and a pleasant sweet taste. When using food coloring, the product takes on a more attractive appearance.
To maintain the high quality of the “cotton wool”, it is necessary to clean the disk from adhering syrup after each working cycle. Feshmak cannot be stored outdoors for a long time - this is its significant drawback. Sealed packaging and refrigeration will keep it for a day or more.
Do not despair if you are not satisfied with the quality of the product the first time. The main condition for success is the accuracy of each operation.

Cotton candy is quite a tasty delicacy, but the apparatus for making it is very expensive and therefore it should be purchased for home use not advisable.

However, almost everyone can make a homemade cotton candy machine at home. To do this, you will need a simple saucepan and some accessories that are likely to be found in every pantry. Manufacturing home device It won’t take much time, but it will cost mere pennies. With a little work, you can make cotton candy from simple sugar at any time and in any quantity.

For successful work To use the machine, you will need a container that will be filled with sugar. This container will be heated, causing the sugar to melt and rotate. As you rotate, thin strands of melted sugar will be ejected through the holes in the container. The container must be placed inside a large pan to contain the ejected threads.

First you need to select everything you need to make the device. These include components and tools.
Prepare the following tools:
- Drill and several drills. A thin (no more than one millimeter) drill is required.
- Soldering iron.
- Set of files.
- Tin scissors and a can opener.

Device components:
- Jet lighter. These lighters are characterized by a blue flame and produce heat that is higher than the temperature of conventional lighters. At the same time, no soot is released during combustion. The lighter must be able to burn on its own, this is due to the fact that placing your hand with a lighter in a pan with flying sugar threads is somewhat inconvenient.
- Electric motor direct current powered by low voltage (for example, nine volt).
- The power source for the electric motor can be a simple battery.
- A small tin can, preferably a tall one, for canned vegetables.
- Small cap for installing lighter, you can use milk cap.
- Large saucepan or bucket.
- A relatively long stick, longer than the width of the pan. Any will do wooden plank or metal rod.
- A rod or tube about fifteen centimeters long.
- Small bolt, nut and washer.

After completing the configuration, we proceed directly to production:
1) We secure the lighter.

We prepare a stand for the lighter. It is necessary to wrap the lighter with cling film in at least two layers. Then mix up some epoxy glue, pour it into the milk cap and place the lighter in the cap. After the glue has hardened, you need to remove the lighter and clean it from the film. The removable lighter stand is ready.

2) Installation of the motor and rod.

The motor is connected to the tin can by a short rod or tube. One hole must be drilled at the ends of the rod. One hole is intended for connection to the motor shaft, so the drill is selected accordingly. After drilling, insert the shaft into the hole and secure it with a drop of superglue. You can also use a locking screw to secure the shaft in the hole, but this will require drilling another hole and tapping threads, although it will provide the ability to remove the motor if necessary. Think for yourself what you like best.

After this, we drill a second hole to attach the tin can. The can will be secured with a bolt, so the drill must match its diameter.

Finally, we attach the engine to cross bar. This is quite simple to do; drill two holes in the center of the bar and secure the engine with two screws.

3) Installation of the can.

The tin can is the container in which the sugar will be melted. To do this, you need to pour sugar into it, hang it over a fire source and spin it, and sugar threads will begin to fly out of the holes in its sides.

You should start by cutting a hole along the top edge of the can. Using a can opener, remove the top lid of the can completely and file the edges to remove any burrs. This will prevent wounds during the cotton candy making process.

After this, you need to drill a series of holes on the sides of the can, at its lower edge. The holes should be as small in diameter as possible, even with holes one millimeter in diameter, some sugar can pass through them without having time to melt. So use the smallest diameter drill you can find. Drill holes at a height of approximately one centimeter from the bottom seam of the can.

4) Securing the can

Drill a hole in the can to attach it to the rod. Secure the can with a bolt and nut. In principle, the can can simply be soldered to a metal rod or nailed if the plank is wooden. But the mounting option with a bolt and nut is better, as it allows you to remove or replace the can.

Pay special attention to the fact that the can, attached to the rod, is conveniently located above the fire source inside the bucket or pan.

Making cotton candy

The installation is ready. Let's start preparing cotton candy. Light a lighter, place some sugar in a can and start the engine.
Place the lighter inside the pan. Once the jar is warm enough, the sugar will begin to melt and fly out of the holes in the sides of the jar in the form of cotton candy. After a certain amount of cotton wool has formed, collect it with a bamboo stick.

Many people ask, is it possible to make cotton candy yourself or is it possible to make a cotton candy machine yourself?

I answer the first question: yes, of course! You can even make cotton candy with your own hands at home. To do this, just buy an electric motor, attach an analogue of a jet head to it (a tin can with a bunch of holes) and pour hot sugar syrup into the rotating head. The output will be a sweet sugar fiber - if you collect it and wind it on a stick, it will be cotton candy. Here's how it happens in the video:

Now we need to answer the second question: Is it possible to make a cotton candy machine with your own hands and earn money from it?

Here, not everything is simple: on the one hand, on the Internet there are drawings of machines that can (theoretically) produce cotton candy. And I can even give one of them as an example - see photo

The design includes: electric motor (from washing machine), disk (analogue of a jet head), bushings, body. It is interesting to read the description of the device:

“It is possible to use any other while maintaining the specified number shaft rotation speed. The disk is made of sheet aluminum, its diameter is 170 - 180 mm (and thickness - 0.2 - 0.3 mm. You can use tin from a tin can (herring)."

The cotton wool production process is also very interestingly described:

“To prepare 8-10 standard servings, place in a small, preferably enamel dishes 110 - 115 gr., granulated sugar (20 - 22 pieces of sugar). Pour in 120 - 150 ml of water and, without stirring, put on fire. After 5-10 minutes, the water will boil away, and the sugar will begin to turn slightly yellow, and a light smell characteristic of burnt sugar will appear. Knock down the foam with horizontal movements of the ladle and pour the contents of the ladle in a thin stream onto the edge of the 2-4 mm disk, which is already rotating. Hot syrup, breaking into thousands of thin threads, hardens at room temperature.

Then turn off the engine, separate with a simple knife threads from the body, cut the finished product along the diameter line and roll the resulting semicircle into a tube on the table. Do the same with the second semicircle and cut the “cotton wool” into the required number of servings. Food coloring may be used.

To maintain the high quality of the “cotton wool”, it is necessary to clean the disk from adhering syrup after each working cycle. When using two or three ladles at once, the manufacturing process becomes virtually continuous. Don’t despair if the product doesn’t turn out to be of very high quality the first time, use the same mixture again.”

As you can understand, already in the theory of the future vatokata a lot of difficulties await. In practice, I’m sure there will be even more of them - we must not forget that we work in outbound sales and therefore the device must be assembled and disassembled all the time. Unfortunately, in such conditions it is impossible to ensure constant quality products and reasonable speed of cotton wool production.

Therefore, both answers to the second question are negative: it is impossible to make a cotton candy machine with your own hands, and even more so, it will be impossible to make money from it!

Friends, let's not get lost on the Internet! I suggest you receive notifications by email when my new articles are published, so you will always receive all new articles.

Good afternoon, dear readers!

Today, I will describe How to make a cotton candy machine at home.
There is nothing complicated in the design, everything is simple. I’ll also write down the ingredients for the cotton wool itself at the end.

We will need:
- a motor (not a big motor, you can pull it out of a toy);
- the lid used to seal the jars (iron);
- medium box;
- adhesive tape, electrical tape;
- scissors;
- blank paper;
- power supply for the motor (you can take a charger from your phone and cut off the plug).

It seems like everything, during the text, if I haven’t completed all the details, it will be visible.

The manufacturing process of the device

So, let's start, first we take the motor and connect it to power. I cut off the USB cable from the phone and connected the wires to the motor. Thus, you can connect to any USB socket.

So, the motor itself needs to be attached somewhere, I have a motor of this shape and I used a can of pneumatic bullets as a mount for it, you can come up with something else!

The motor itself still needs to be fixed in the box, I decided to make a removable motor, the bullet can is divided into two parts. The photo makes the meaning clear.

We insulate the motor itself well so that when making cotton candy the motor does not get clogged, you can place it in some container or wrap it with tape.

Now we need a box. You need to take the middle box; for example, I took the first one I came across. Only the top should be open, the rest of the parts should be closed.
Here in the photo you can see the shape of the box, however, I cut the hole myself, it turned out crooked.

It is not known what was in the box. Therefore, to protect myself, it was decided to cover it with something inside, I used food paper, cakes, pies and the like are usually baked on it. If you don’t have it, you can use clean paper, oilcloth, well, whoever has enough imagination for what.
To keep the paper securely, I taped it on the sides:

Now the next stage, we need to fix the motor in the center of the box so that it holds confidently and does not move too much to the sides. You also need to remove the wire so that it does not stick out there.

Next, we will need a regular iron lid, which is used to roll up jars; the lid needs to be secured to the rotating part of the motor, at the top. You need to attach it as evenly and tightly as possible. Be sure to check that the motor turns the lid and does not spin, and that the lid rotates as smoothly as possible.

We did everything, the most important thing, hurray! All that remains is to prepare the “mixture” itself for making cotton candy.
Anyone who has prepared the so-called “cockerels” in sugar molds will already begin to guess what we will be talking about.

For those who don't understand, read:

We need:

Sugar;
- water;
- spoon;
- and some kind of capacity.

Take sugar, pour it into the container where we will cook it, add water. The result should be a homogeneous mass, not very thick and not very liquid. Don't overdo it with water!

After pouring in the sugar and water, mix a little, put on the fire and simmer, the main thing is to stir thoroughly, otherwise there will be lumps of sugar. Cook until the mixture turns brown and there will be bulbs - this is normal.

After it’s cooked, we don’t let it cool, we turn on the motor, the lid starts to spin, we start pouring the digested sugar from the container directly onto the lid and observe the appearance of cotton candy!

The main thing is not to rush, not to pour out a lot at once, but also not to hesitate, otherwise the mass of sugar will harden and nothing will work, it’s better to reheat it again. That's it, bon appetit everyone. There was no opportunity to capture the process itself, this is my second “device” for cotton candy, I didn’t do this, but I did it first more than once, it turned out no worse than the one I bought! You can add dyes and flavors, this will give the look, taste and smell of your cotton candy. Whenever possible, I will try to post photos of the process itself.