A device for straightening dents without painting. Three DIY ways to remove dents without painting. Types of straightening tools

Description of the device.

Dent straightening device. Fiction has become reality! How to remove dents? Newest technologies in car repair. New from Switzerland, innovative device for eliminating and straightening small dents on a car without painting. The T-Hot Box device is professional device for pulling out dents without the need for subsequent painting. This is the latest Swiss equipment for removing small dents on cars.

Use cases.

Dent remover. The device is used to remove shallow dents on the car body after minor impacts or damage. Particularly effective for straightening out dents caused by small hail. Using this induction device, you can remove small parking dents, remove dents from falling icicles, dents received during vehicle transportation, as well as dents from other external damage. Minor body repairs of shallow dents, tightening of flappers and raising of transitions after puttying and painting are possible.

The task of the device.

Instantly removes small dents on the painted surface of magnetic (steel) metal cars without damaging the paint.

Operating principle.

Through the induction radiation of the device, the effect is aimed only at heating the metal. Paint and other polymers on a metal base do not heat up. When heated, the metal base contracts, and since the tension in the dent metal is directed upward, the profile is restored to its previous shape. If you can’t pull it out the first time, you need to wait for the surface to cool completely, avoiding overheating the paintwork (you can cool it by spraying water) and repeat again.

Safety.

The radiation is completely safe for the human body (which does not have metal objects in its body).

The scope of application of the device is to remove dents on a car.

Advantages of the device.

Lightning fast work
Easy to use, without any effort
Diverse scope of application for all metal structures
No time spent on labor-intensive disassembly of parts
Possibility of car repair without damaging the paint
Elimination of unnecessary painting work
Straightening and puttying work becomes unnecessary
Absence Supplies when working with the device
Saving time and consumables for stripping, puttying, painting, as well as saving energy required for drying

Video - Video on removing dents without painting using the T Hotbox HTR2, equipment for eliminating, removing small dents without subsequent painting.

Available various technologies and methods for removing dents on cars without painting. For example, using the PDR tool, see by clicking . The most optimal and quick repair small gentle dents from external damage, this is done using the T Hot Box HTR 2 device.

Contents of delivery:

1 x T HotBox HTR 2

1 x Induction head

1 x Storage case

1 x English manual

Manufacturer's warranty for the device is 12 months.

Get acquainted with and purchase a device for removing small dents without painting in Moscow .

Additional information You can see about straightening dents with an inductor and a combined method by clicking

NEW!!! Appeared on the market of induction devices new multifunctional device HotBox for carrying out repair work on a car, including repairing dents without painting.

This is a universal device with many advantages and many capabilities compared to previously offered devices. HotBox has the following features:

fix dents without painting

warm up stuck, rusted bolts, nuts and other car parts

burn salt blocks

remove any resin graphics

remove underbody anti-corrosion coating, etc. can work with aluminum

It comes standard with the entire range of necessary attachments and accessories. At the same time, the price of the device is lower than that of its analogues.

There are several ways to smooth out dents. Traditional option involves straightening, puttying and repainting or replacing a damaged part. However, if the paintwork is intact, repairs can be greatly simplified by using the paintless dent removal equipment discussed below.

This leveling technology can be used for any metal car body parts. The main condition for leveling dents using the method under consideration is the integrity of the metal and paint coating. That is, metal breaks, cracks, chips and other paint defects are unacceptable in the damaged area. However, minor damage such as scratches is acceptable and must be removed by polishing.

Equipment

Levers and bump stops

This paintless dent repair tool is used for mechanical alignment from the inside. You can use an oblong pin or a flat bar as a lever. The technology under consideration is based on differential pressure. The principle of work is to squeeze out the dented area from the back side with a lever placed in the technological hole. When the material returns to its original place, a click occurs. You need to apply pressure carefully and smoothly, controlling the appearance of edges and peaks. To straighten them, a fluoroplastic bumper is used.

However, since this method is associated with penetration into the vehicle, its scope of application is limited, since not all areas of the body can be reached with a lever through technological holes.

Pops-a-Dent

This is a specialized set of tools for fixing dents without painting, including an applicator, glue and a mini lifter. This specialized kit is used for external straightening of dents. Its basis is a device in the form of a bracket with two rubber tips. In addition, the kit includes glue, a gun, and a set of attachments.

The previously damaged area of the car is degreased. Then heated glue is applied using a gun to one of the nozzles (also degreased) and installed in a clockwise circular motion in the center of the dent. In this case, excess glue comes out through the holes in the nozzle. The hardening time is 2 - 3 minutes. After it dries, the dent is pulled out with a mini-lifter - a bracket is installed on the nozzle and screwed on until the defect is completely straightened. Upon completion of the work, the device is left on work surface for 5 minutes. At the end of the work, the surface is cleaned of glue.

There is other equipment for removing dents without painting using this method. For example, a piston is used in a similar way. It is also glued to the damaged area and the dent is straightened by pulling. It is also possible to use a non-professional tool, such as a set of suction cups. The technology for their use is the same.
The adhesive method has a much wider scope of application, since with outside Almost all dents can be straightened out. At the same time, the work is very simple to do with your own hands.

Vacuum suction cups

The technology for using vacuum suction cups differs from the above-mentioned suction cups attached to glue, since this equipment is installed on the working surface using the vacuum method.

The previously damaged area of the car is cleaned. Then install a suction cup and create a vacuum in it with a pump. Finally, the pump hose is disconnected and the dent is pulled out. Upon completion of the work, the vacuum is released by opening the valve and removing the suction cup. From the glue method this technology It stands out because there is no need to clean the body after repairs.

Set of levers

Such equipment is used when straightening dents using PDR technology. The set includes many hooks that differ in shape, length and curvature of the working part. In addition to them, you will need a hair dryer, a plastic spacer called a drift, and a mallet. It may be necessary to dismantle it before starting work. interior lining and adjacent vehicle parts. On a pre-cleaned working surface, the metal tension in the bending areas is relieved. Then the damaged area is heated to 40 - 50°C. The edges of the bend are lightly tapped using a punch to avoid damage to the paintwork. Leveling is carried out by pressing on the damaged surface from the back. To do this, select a lever depending on the conditions for the location of the defect, insert it into the technological hole and, turning the handle, act on the surface. Professional sets are equipped with polymer wedges that are placed under the hooks to prevent damage to parts. The technology under consideration is the most difficult for do-it-yourself repairs, as it includes various methods repair. It is usually used to correct complex and extensive defects.

Magnet

This tool is used to straighten dents using the pulling method. Place a rag under it so as not to damage the paintwork. The magnet is moved from the edges to the center of the dent, slightly pulling.

Hairdryer and can of compressed air

The use of such a kit involves a thermal method for straightening dents. It is based on the tendency of the metal to return to its original shape under the influence of temperature. First, the damaged area of the car is heated construction hairdryer, and then direct air from a can onto it. In this case, the metal is leveled. When straightening large dents this operation will have to be carried out at several points. Moreover, their location is not chosen randomly, but depending on the shape of the defect. So, for round dents, the points are placed along the radius, and for oval ones, along the narrow side. If there are rigid elements in the defect area, alignment begins with them. This method does not always allow you to completely straighten the damage, so for complete straightening, use a mallet with a rubberized backing material to protect the paintwork.

Also, among other things, you will need a set of protective equipment in the form of gloves and a mask, since this work is related to high temperatures(300 - 650°C).

There is also the option of performing repairs using this method using household materials. So, it is suitable as a heating tool gas-burner, and water can be used for cooling.

Set of rubber mallets and anvil

This equipment is used to tap out dents from the back, and the anvil is placed on the outside to prevent the metal from bending in the opposite direction. Tapping begins from the center of the dent, moving to the edges in a circular motion. The force of the blows should be controlled, as exceeding it can lead to thinning of the metal. If there is no access to the damaged area, a set of hooks is used.

Car dent removal kit (mini lifter) PDR

Price: $33.99

Go to the store

Hi all! Today in my review I’ll tell you about a kit for removing dents on a car, whether it works, and whether it’s possible to straighten your car like this without experience. Details under the cut

PDR technology is the repair of dents on a car body without painting, that is, with full preservation of the factory paintwork.

The first tool that a PDR specialist picks up is a special lamp that helps to “read” the dent, that is, assess its size, depth, and the condition of the paint layer. Repair is not complete without hooks, which are used to squeeze out dents from the inside out, and without an adhesive system that allows you to correct the geometry of the part from its outside, if there is no access to the internal one.
The main method of removing dents is done using various hooks, like these

I will only use adhesive technology, although this is not correct, because it takes a long time and is not so effective.

To do this, I took a kit (minilifter + fungi + bumper) and additionally ordered glue

Using a mini-lifter you can remove dents whose diameter does not exceed 1-2 cm.

The set includes 10 mushrooms of different sizes (in the photo I sharpened one and lost one). The fungi need to be glued to the dent and pulled using a mini-lifter.

I have no complaints about fungi, they do their job.

I immediately ordered hot melt glue, it seems to be special, but you can also use it from a hardware store.
A set of 10 pieces (5 black and 5 yellow) costs $6.90.

Yellow is soft, black is a little harder, but softer than the transparent one from the hardware store.

there's even some markings

I used yellow glue, it sticks and pulls perfectly.

Let's get to work!

Although it’s difficult to convey the depth and shape of the dent in a photo, I’ll try. Focus more on words.

First you need to degrease the dent, then warm it up with a hairdryer (without fanaticism)

Then we apply glue from a heat gun to the fungus

and glue it exactly in the center of the dent

We wait about 1 minute (approximately) and begin to pull with a minilifter

You need to slowly, smoothly pull out the dent. To peel off the fungus, you need to spray alcohol and the glue will bounce off.
The dent has become smaller, but has not gone away (look at the hook)

I made a short video, at the end I peeled off the fungus myself so as not to overtighten it.

I have no questions about the instrument itself, in the right hands it will work as it should.

Thank you for your attention, good weather everyone :)
If you have questions, ask in the comments.

The product was provided for writing a review by the store. The review was published in accordance with clause 18 of the Site Rules.

Pulling out dents on the body is a simple technology that does not require painting

Every motorist is aware of which part of the body of his car contains damage and defects. However, not many people know that getting rid of them is quite simple, and this can be done in just a few minutes.

1 PDR technology – is it suitable for beginners?

Today it has become possible to restore the car to its original appearance thanks to the use of high-quality materials in production. Today, automobile concerns use paint coatings with increased hardness, which are combined with good elasticity. Thanks to this, anyone can start leveling the base without worrying about the integrity of the paintwork.

In the last few years, car manufacturing companies have begun to use thinner material that is quite easy to straighten. Moreover, he became characterized by “shape memory” - the ability to return to the state in which he was originally. Thanks to this, today it is possible for everyone to remove jams using the method PDR without repainting. Among the advantages of this American technology, it is necessary to highlight:

it is 100% effective and leads to a complete restoration of the original appearance of the car at home;
this technology does not require much time and effort. Depending on the complexity, the work will take from 10 minutes to an hour;
this method is more economical than other repair methods;
its use allows you to get quick and high-quality results;
work on the body is carried out in a gentle manner.

However, pulling out dents without repainting can only be done under certain conditions:

if this part of the machine has not previously been repaired;
there is no through destruction of the metal;
the paint layer is not damaged and has no breaks;
if the car is not older than 15 years.

The size of the damage has virtually no effect on the process of repairing it on the car. However, due to design features machine, it will not be possible to get rid of damage in hard to reach places. These places include areas on the sills, on the cab pillars and along the edges of the trunk elements. To repair the body from the inside, it may be necessary to completely or partially dismantle the trim.

2 Body restoration - features and preparation

The name of the technology (PDR) comes from the English phrase Paintless Dent Repair, which means: paintless dent removal. The very essence of the procedure is a kind of “massage” of the bent body using certain tools. main feature method - the need for special equipment that is not very expensive. The method also requires some experience, with which you can fix almost any jam on your car.

The list of required tools is as follows:

bumper;
small hammer;
mallet;
mini-lifters;
hooks;
levers;
applicators and hot melt adhesive;
magnets;
vacuum suction cups.

Many of the devices on this list can be purchased as kits. True, in this case you will overpay a little, since you will already receive professional tools. However, they will help clear jams much faster and more efficiently. It is important to remember that work on the body is carried out on both sides, so before work you will need to provide free access to the damaged area. Dents can be removed from the outside using adhesive joints or vacuum devices. You can get rid of jams from the inside by performing pressing movements.

3 How to get rid of dents - principles of working with tools

Repairing any defect using this method is based solely on mechanical effects on the surface of the damaged body. To achieve this, the PDR method involves the use of various devices. One of the options for eliminating damage is based on the use compressed air. The use of vacuum equipment is based on pressure differences, which stimulates the removal of jams. To do this, you first need to find the center of the damaged area, install a suction cup on it and pull the body towards you. In most cases, this method is used in conjunction with lever action on surfaces from the inside.

Another option involves the use of magnets. They are used primarily for repairing minor jams. In this case, you need to put under them soft cloth which will prevent damage to body parts. When working, we move the magnet from the edge to the center until the body section returns to its original place.

The next option is to use a hair dryer. By heating sections of the wing or other body elements, you will increase the plasticity of the material and make it “remember” it from initial form. In addition to a hairdryer, you will also need a can of compressed cooled air. During operation, the metal is first heated, after which it is immediately cooled by a stream of air. This method is called the “heat shock method” due to the exposure of the body to warm and cold air.

Another method involves tapping the body with a straightening hammer. This method is used when it is necessary to repair removable body parts. To do this, place the spare part on a solid base, face down. After this, you need to take a hammer and carefully, without applying significant effort, level the element. If the jam is large enough, then you need to tap with a hammer from the edges towards the center.

The next method is to use the kit Pops-a-Dent. It consists of a plastic bracket, at the ends of which there are nickels. The kit also includes a glue stick, glue, wing, nozzles and an electric gun. When working with such a kit, you should thoroughly degrease the surface and apply thermal glue using a gun. After this, the attachment from the kit must be glued clockwise to the center of the damaged area of the body. After 3 minutes, a bracket is attached to the nozzle. To fix a problem area of the body, you need to screw the bracket onto the nozzle using a thumbscrew. Upon completion of work, the equipment should be left glued to the body for another 5–10 minutes.

The latest version of the PDR method is based on the use of an adhesive applicator. To do this you will need a mini lifter, thermal glue and a special applicator. Using a lifter, you need to pull out the jams, fixing them with the applicator glued to the body. At the end of the work, you need to get rid of the glue. Various chemical cleaners will help with this. Whichever alignment method you choose, you should practice using the old one. metal product. This will help you “teach your hand” and carefully return the damaged area of the body to its previous condition.

4 Self-removal of defects - from preparation to completion

To repair damaged areas of the body, you should follow of a certain order actions. First of all, you need to prepare for work. To do this you will need to purchase everything necessary tools and prepare workplace. Since the car owner will be working with household appliances powered by electricity, the procedure requires moving the car to a garage.

The next step will be preparing the body. To do this, the damaged area must be washed, dried and degreased. Next, you will need to relieve tension in the curved areas. Take a hammer and lightly tap it along the edges of the damaged part of the body, after placing it under it steel sheet. The further procedure looks like this:

Straighten the concavity using one of the tools - suction cups, hot glue applicator or magnet. Be careful not to apply too much force when hitting, so as not to further damage the car;
Continue tapping the body with a hammer or holding a magnet near the damaged area until you hear a characteristic click;
After this, be sure to tap the inside of the body with a hammer. This will help completely remove any remaining small jams.

When working with the body, be sure to take into account the size of the damaged areas. To remove large jams, it is better to use larger equipment, for example, vacuum suction cups. For small dents, experts advise using small tools such as a chipper and glue applicators.

When working, it should be borne in mind that the result is assessed only “by eye”. No equipment is provided to determine the quality of work performed using the PDR method. To find out whether you have achieved the desired result, use the glare effect from the improvised lighting fixtures. If you did everything correctly, the surface will reflect light evenly. That's all the nuances we wanted to tell you about! We wish you good luck in your recovery appearance your iron horse!

Tools for straightening and pulling a car without painting

Unfortunately, almost all the parts that make up external finishing cars have the unpleasant property of becoming deformed as a result of accidents or simply minor incidents during driving or repairs. IN absolute majority In some cases, the situation can be corrected without replacing the damaged part.

If we're talking about about simple deformation of the threshold, hood or body, then regular straightening of the car will be sufficient (even easier if such straightening does not require painting the damaged part after completion of the work).

Why are straightening tools needed?

As a rule, vehicle owners prefer to take their car to specialized workshops, where the repairs will be carried out. However, now more and more owners are switching to self-service, since straightening done correctly with their own hands will not be inferior in quality to the services of a workshop, and will require much less money. However, it should be borne in mind that for this kind of work you will need straightening equipment. As a rule, tools for body straightening are sold in special sets, but individual sales are also possible.

It is always more profitable and convenient to buy a kit for removing dents on a car - it will by default contain everything you need, and its contents will be ideal for working with each other.

Types of straightening tools

So, the standard set of tools for removing dents on a car without painting, as a rule, includes:

Straightening hammer. Basic tool for removing dents on metal parts car body. It is with its help that the simplest and most reliable straightening is performed. As a rule, to work you just need to fix the part on the workbench. Using a uniform hammer will quickly return the car body component to its original appearance. As a rule, one kit for removing dents on a car without painting includes several straightening hammers. They differ different sizes, weight, size and shape of the impact parts, as well as the presence of rubberized attachments on the handle and bump stop. These hammers are intended for various types of straightening work and will help different stages straightening parts with your own hands. Of course, for small dents it is best to use straightening hammers with a smaller striking part and lighter weight, and for large dents - large ones.

Straightening hammer

Attachments for straightening hammer. As a rule, the straightening hammer also comes with several attachments for it. They allow you to produce high-quality repairs any component of the car body, as they are designed for a specific type of work.

Straightening hammer attachments

Reverse straightening hammer. Often, a reverse straightening hammer is used in situations where it is necessary to remove a part vehicle impossible, but straightening is necessary. The principle of operation of a reverse straightening hammer is that one end of it is welded to the problem surface. After this, the master begins to hit the second end of the hammer with a weight, moving it along the body. Also, sometimes the kit includes a special hook that can be attached to the end of the hammer. If you use reverse hammer with a hook, you will not need to weld it to the surface of the car - you will just need to drill a hole in it and insert this hook there.

Conclusion

Having the entire range of tools listed above, you will be able to carry out work on straightening the surfaces of your vehicle of any complexity (and the quality will not differ from the factory one). Before using each unit, you must read the instructions and safety regulations.

Pops-a-Dent Car Dent Removal Devices

No matter how careful and prudent the driver is, he still will not be able to insure against unpleasant situations on the road, including minor damage to the car. Of course, if the hood or fender of the car is soft-boiled, there are no options here - you will have to send the car for repairs.

But if the damage does not look major, you can try to straighten your car yourself without wasting time and money on service services. For this purpose, there is a unique development of a device for removing dents on a car, Pops-A-Dent, about which a few words are worth saying.

Video

Benefits of the tool

The Pops-A-Dent kit, which you can purchase at a reasonable cost, is a kit that can remove small dents. Using Popsa Dent, you can not only smooth out defects, but also give the surface of the car its previous appearance.

Despite the apparent difficulties, not only men, but even women can handle the device. The only condition required when using the repair kit is special care and slowness.

The obvious advantages of the Pops-A-Dent dent removal tool include:

no scratches during use of the kit;
the ability to use Pops-A-Dent for any brand of car;
ease of use;
the compactness of the device, which allows it to be used in any conditions;
significant savings in money and time.

Using a unique device for removing dents on a car, you can fix the problems yourself, without damaging the paintwork and without resorting to the help of specialists.

The Pops Dent set is very reliable to use, and its effectiveness has been proven by numerous tests and customer reviews.

How to use the kit

Working with the tool is no different. The gun is filled with glue, then the damaged area is covered with the composition, where the suction cups are mounted.

A bracket with a screw is put on the suction cups - and you begin to carefully pull out the dent, giving the surface its original evenness.

Without any haste, any motorist will correct the irregularities quickly enough.

Stages of work:

Clean and degrease the dent area on the car.
Depending on the size of the damage, choose one of three attachments.
Glue the selected nozzle with glue using a hot glue gun.
Wait 5-10 minutes for the glue to harden.
Place the bridge-bracket on the nozzle.
While screwing the nut, tighten the dent until it is level.
Remove the remaining glue from the surface of the car with a special rod.

Equipment

bracket;
three suckers;
gun for heating the adhesive filler;
thermal adhesive composition;
glue removal rod;
instructions.

The Pops Dent repair kit will save not only time, but also nerves - after all, the car will be repaired by your with my own hands, and it’s worth a lot! This device is an excellent alternative to expensive body repair work.

Delivery in Moscow:

Delivery time: from 1 to 2 days
Delivery cost to the pickup point: from 0 to 125 rubles.
Delivery cost to door: from 255 rub.

Full refund if the product is of poor quality
Exchange/return if the product does not suit you

Often as a result of minor accidents, minor impacts or even atmospheric precipitation In the form of hail, a certain number of dents remain on the car, while the paintwork of the body remains completely undamaged. In this case, a trip to a car repair shop for body work is not always justified, because you can fix shallow damage yourself using simple devices. The result of innovation in the field of car repair was the appearance of a device for removing dents. Devices for pulling out dents without subsequent painting have appeared on the market of special equipment. Such equipment makes it easy to eliminate such defects small sizes by car. A new product from Switzerland, the T-Hot Box device is a professional device for pulling out dents without the need for subsequent painting.

The dent remover can be used to straighten the body after minor impacts or damage from falling icicles or hail. It can be used to repair shallow damage caused when parking or transporting a car, as well as eliminate “pops” (stretched metal).

The operating principle of the device is based on induction radiation, the effect of which is aimed at heating exclusively the metal. Paint and others polymer materials located on a metal base do not heat up. When heated, the metal base contracts, and due to the fact that the stress of the metal at the damage site is directed upward, the previous profile configuration is restored.

If this does not happen the first time, you should repeat the procedure after the surface has completely cooled. The use of such a device will undoubtedly facilitate the work of body repair thanks to many things:

ease and simplicity of operation;
no need to disassemble the car;
lack of painting work;
No consumables are needed when operating the device.

Repairing a car using the device becomes possible without damaging the paint, which saves time and consumables for stripping, puttying, and painting. Drying is also excluded from the repair process, which saves time and energy.

This device is specially designed to rid the car surface of various types bumps (from hailstones to large shallow dents), while maintaining its paint finish. Rest assured that this device will remove minor damage to the body.

How does a car dent remover work?

Due to the rapid heating of the metal, it expands. And since the heating area is very small and rapid expansion, the paint and varnish do not burn. A prerequisite is to do the next cycle after complete cooling. In one cycle, heating up to 80 degrees. Since on positive and straight surfaces the metal tension ( directed upward) with minor damage it rises and takes on its original shape. This process is explained by the fact that the speed of movement of atoms inside increases and that is why their degree of attraction also increases, which entails the above changes.

Using this dent straightener you can get rid of different types damage. This device will be useful to you in the following cases:

when getting rid of stretchiness metal surfaces;
when eliminating minor surface damage;
when removing deep dents (for example, when parking poorly) using the PDR hook.

Device contents

T-Hot Box PDR device;
traction (induction) head with cable;
case for carrying and storing the inductor;
user manual - download.

How to work correctly with T-Hot Box HTR-02

Let's move on directly to the process of removing T-HotBox HTR-02 dents with an inductor. Please note that to receive best result, before work it is advisable to remove insulating material(if any).

Before turning on, you need to place the induction head at the very edge of the damage, and only then activate the induction flow with one light press of the button. After this, you will be able to observe its penetration into the middle of the metal. The frequency at which these procedures are repeated depends on the amount of damage to your vehicle.

The average exposure time lasts from 1 to 4 seconds (it directly depends on the metal you are working with, as well as its thickness). If it is necessary to repeat the procedure, you must wait until the surface has completely cooled. Neglecting this rule may result in additional damage such as burning of the paintwork. In order not to encounter such difficulties, it is best to practice on other similar materials that you are not afraid of spoiling before use. Such training will teach you to “catch” that dangerous moment of burning and will protect you from its repetition during the main procedure with the car.

The scope of application of the device for removing dents on a car:

Parking dents
A device for removing, repairing and repairing dents on cars without painting.
Hail Dents
Dents received during vehicle transportation
Dents from external damage such as vandalism or other impacts
Elimination of “poppers” (stretched metal)

Advantages of the device

Lightning fast work
Easy to use, without any effort
Wide range of applications on all metal structures
No time spent on labor-intensive disassembly of parts
Possibility of car repair without damaging the paint
Elimination of unnecessary painting work
Straightening and puttying work becomes unnecessary
Lack of consumables when working with the device
Saving time and consumables for stripping, puttying, painting, as well as saving energy required for drying

Effect when using an inductor

The result after using the T-HotBox PDR inductor can be enhanced by combining it with the adhesive alignment method. This method will help pull out deeper dents. This technique allows you to work on the edges of parts, as well as in tight areas of difficult access.

There are several ways to smooth out dents. The traditional option involves straightening, puttying and repainting or replacing the damaged part. However, if the paintwork is intact, repairs can be greatly simplified by using the paintless dent removal equipment discussed below.

Peculiarities

This leveling technology can be used for any metal car body parts. The main condition for leveling dents using the method under consideration is the integrity of the metal and paintwork. That is, metal breaks, cracks, chips and other paint defects are unacceptable in the damaged area. However, minor damage such as scratches is acceptable and must be removed by polishing.

Equipment

Levers and bump stops

However, since this method is associated with penetration into the car, the scope of its application is limited, since not all areas of the body can be reached with a lever through technological openings.

Pops-a-Dent

The previously damaged area of the car is degreased. Then heated glue is applied using a gun to one of the nozzles (also degreased) and installed in a clockwise circular motion in the center of the dent. In this case, excess glue comes out through the holes in the nozzle. The hardening time is 2 - 3 minutes. After it dries, the dent is pulled out with a mini-lifter - a bracket is installed on the nozzle and screwed on until the defect is completely straightened. Upon completion of work, leave the device on the work surface for 5 minutes. At the end of the work, the surface is cleaned of glue.

There is other equipment for removing dents without painting using this method. For example, a piston is used in a similar way. It is also glued to the damaged area and the dent is straightened by pulling. It is also possible to use a non-professional tool, such as a set of suction cups. The technology for their use is the same.
The adhesive method has a much wider scope of application, since almost all dents can be straightened from the outside. At the same time, the work is very simple to do with your own hands.

Vacuum suction cups

The technology for using vacuum suction cups differs from the above-mentioned suction cups attached to glue, since this equipment is installed on the working surface using the vacuum method.

The previously damaged area of the car is cleaned. Then install a suction cup and create a vacuum in it with a pump. Finally, the pump hose is disconnected and the dent is pulled out. Upon completion of the work, the vacuum is released by opening the valve and removing the suction cup. This technology differs favorably from the adhesive method in that there is no need to clean the body after repairs.

Set of levers

Such equipment is used when straightening dents using PDR technology. The set includes many hooks that differ in shape, length and curvature of the working part. In addition to them, you will need a hair dryer, a plastic spacer called a drift, and a mallet. It may be necessary to dismantle the interior trim and adjacent parts of the vehicle before starting work. On a pre-cleaned working surface, the metal tension in the bending areas is relieved. Then the damaged area is heated to 40 - 50°C. The edges of the bend are lightly tapped using a punch to avoid damage to the paintwork. Leveling is carried out by pressing on the damaged surface from the back. To do this, select a lever depending on the conditions for the location of the defect, insert it into the technological hole and, turning the handle, act on the surface. Professional sets are equipped with polymer wedges that are placed under the hooks to prevent damage to parts. The technology under consideration is the most difficult for do-it-yourself repairs, as it includes various repair methods. It is usually used to correct complex and extensive defects.

Magnet

This tool is used to straighten dents using the pulling method. Place a rag under it so as not to damage the paintwork. The magnet is moved from the edges to the center of the dent, slightly pulling.

Hairdryer and can of compressed air

The use of such a kit involves a thermal method for straightening dents. It is based on the tendency of the metal to return to its original shape under the influence of temperature. First, the damaged area of the car is heated with a construction hair dryer, and then air from a spray can is directed onto it. In this case, the metal is leveled. When straightening large dents, this operation will have to be carried out at several points. Moreover, their location is not chosen randomly, but depending on the shape of the defect. So, for round dents, the points are placed along the radius, and for oval ones, along the narrow side. If there are rigid elements in the defect area, alignment begins with them. This method does not always allow you to completely straighten the damage, so for complete straightening, use a mallet with a rubberized backing material to protect the paintwork.

Also, among other things, you will need a set of protective equipment in the form of gloves and a mask, since this work involves high temperatures (300 - 650 ° C).

There is also the option of performing repairs using this method using household materials. So, a gas burner is suitable as a heating tool, and water can be used for cooling.

Set of rubber mallets and anvil

Video

Benefits of the tool

Despite the apparent difficulties, not only men, but even women can handle the device. The only condition required when using the repair kit is special care and slowness.

The obvious advantages of the Pops-A-Dent dent removal tool include:

no scratches during use of the kit;
the ability to use Pops-A-Dent for any brand of car;
ease of use;
the compactness of the device, which allows it to be used in any conditions;
significant savings in money and time.

Using a unique device for removing dents on a car, you can fix the problems yourself, without damaging the paintwork and without resorting to the help of specialists.

The Pops Dent set is very reliable to use, and its effectiveness has been proven by numerous tests and customer reviews.

How to use the kit

Working with the tool is no different. The gun is filled with glue, then the damaged area is covered with the composition, where the suction cups are mounted.

A bracket with a screw is put on the suction cups - and you begin to carefully pull out the dent, giving the surface its original evenness.

Without any haste, any motorist will correct the irregularities quickly enough.

Stages of work:

Clean and degrease the dent area on the car.
Depending on the size of the damage, choose one of three attachments.
Glue the selected nozzle with glue using a hot glue gun.
Wait 5-10 minutes for the glue to harden.
Place the bridge-bracket on the nozzle.
While screwing the nut, tighten the dent until it is level.
Remove the remaining glue from the surface of the car with a special rod.

Equipment

bracket;
three suckers;
gun for heating the adhesive filler;
thermal adhesive composition;
glue removal rod;
instructions.

The Pops Dent repair kit will save not only time, but also nerves - after all, the car will be repaired with your own hands, and this is worth a lot! This device is an excellent alternative to expensive body repair work.