So, further it will be written how to make a floor from wooden cuts, what advantages they have. Recently, tree cuts have become increasingly popular. They are used for interior decoration, various items are made from them, and they are also used to make floors in the house.
To make floors from saw cuts, a lot of work is not required. The result will delight you with its natural expressiveness of texture.
Today it is very fashionable to use natural materials to decorate rooms. The following will describe in detail how to make a floor from wooden cuts in a house.
Advantages and disadvantages of floors made from saw cuts
First, learn more about the advantages of this method of floor decoration:
- The floor will be made of natural material that will not have any negative consequences for human health;
- Due to the fact that it is made from natural materials, this will save money;
- The strength of the floor exceeds all expectations;
- Such floors will have an aesthetic appearance and a surface that is pleasant to the feet;
- To make a floor from wood cuts, you don’t need to hire specialists, which also saves money.
Now a little about the disadvantages:
- For such a floor you will need a large amount of wood High Quality. For this reason, it is advisable to cover small areas to protect the forest;
- Floors made from saw cuts will require regular maintenance. Maintenance. This needs to be done every 2 years;
- Any type of wood can be suitable for making such floors. But it is recommended to choose wood that has a dense structure. Oak, walnut, hornbeam, and beech have this structure.
To perform the work, the wood must be completely dried. Wet wood not suitable for floors.
Option one
For this option making a floor with your own hands, end logs of logs up to 120 mm thick can be used. However, in this situation, you can show your imagination and build round log houses various diameters. You will also need to complete the work following materials: lime, sawdust, wax, clay, flax oil, water.
Laying is done as for a mosaic with small gaps between adjacent parts. You need to pour sand with small pebbles onto the surface in a layer of up to 10 cm. Then you need to lay the saw cuts, slightly pressing them into the sand. You also need to adjust the height of the parts - it should be the same. The gaps must be filled with the following paste: 1 kg of fat, 5 kg of sawdust, 1 kg of lime, 2 kg of moistened length.
Then you need to carefully fill all the gaps and cracks in the wood cuts. Leave everything to dry for 2 days. Then the surface must be well polished. This can be done with wax and oil.
Option two
Wood cuts need to be cut band saw. Next, they are placed on plywood, glued with glue for construction work. The seams must be filled with a special solution, which should contain 20% sawdust.
When everything is dry, you need to sand it with a sanding machine. The floor surface will become smooth and the cuts will be clean. Then the surface of the floor from the saw cuts must be covered with sealant. The solution is 80% mortar for self-leveling floors based on epoxy, a self-leveling mixture. It is recommended to choose a dark color. But you will need to make sure that the dark paint does not stain the surface of the log houses.
In some cases, saw cuts are placed on liquid concrete. However, the choice of material is left to everyone’s discretion.
After final leveling and sanding, the floor surface can be covered with stain, then a finishing coat can be applied. varnish coating. This way the floor can be given a certain shade.
Now we know about making floors from wooden logs. Here you can give freedom to your imagination and make various ornaments from log buildings different diameters. Follow our instructions on the technology of performing the work and the floor from the saw cuts will be excellent. We wish you success!
More articles on this topic: 
What is not made from wood cuts. Garden paths, shelves, table tops, interior decoration and much more. Using saw cuts instead of floors in a living room is what our author decided to do.
Materials and tools
dry logs of different diameters;
a circular saw;
grinder;
liquid Nails:
tile grout;
polyurethane varnish for wood;
From dry logs of different diameters to circular saw I sawed round pieces of approximately the same thickness.
Using a sanding machine, sand each cut.
I prepared the base of the floor by removing the old covering. Found myself underneath concrete screed, which made it easier for the author to carry out further work.
Next, he lays the cuts as closely as possible to each other.
Empty space is filled with smaller cuts and twigs.
Having laid out the entire area with liquid nails secures each cut to the floor.
After waiting for the glue to dry, the author grinder Levels and sands the floor. The floor must be level and smooth.
Use tile grout to fill the gaps between the cuts.
After waiting for the grout to dry completely, I covered the floor with polyurethane wood varnish. I applied the varnish so that it got into all the cracks. Polyurethane varnish Apply in 3-4 layers. After the varnish has dried, the floor from the wood cuts is completely ready.
What folk craftsmen use to make their village house or apartment even more attractive and comfortable.
In one of the reviews we already mentioned how you can use saw cuts to make beautiful garden paths. This material is also actively used for interior decoration rooms.
So, armed with hot glue and wooden saw cuts of small diameter, you can create wall panel. You just need to select a pattern in advance and mark their position on the wall.
Let us describe the process of making a decorative floor in a room. To begin with, it is recommended to choose a room with a small square footage in order to try your hand at a modest amount of work. Let it be the floor in the toilet room.
For skeptics, it should be noted right away that the floor made from saw cuts turns out to be quite durable if you follow all the recommendations and masonry technology.
The resulting floor is incredibly attractive, unusual and warm.
To similar positive aspects Of the saw cuts, you can also add its low cost, pleasant sensations when touched, naturalness and safety for health.
Read also:
Kitchen for the country: important in technology
It is also worth noting the minor disadvantages of such floor coverings. Required condition is to purchase high quality wood. You also need to prepare yourself for the fact that such flooring will require maintenance every two years.
The toilet room and living room are most suitable for laying wooden saw cuts. Such flooring tends to accumulate sunlight and give off heat.
To accomplish this you need to prepare the following materials:
- tree logs that need to be loosened into 10-12 cm washers;
- sawdust;
- clay;
- limestone;
- beeswax;
- linseed oil;
- pork fat;
- water.
The saw cuts must be thoroughly dried on both sides. During the masonry process, contact with moisture should also be avoided so that the masonry technology is not disrupted.
Stages of laying flooring
First, you should make sure that the base for the floor is well compacted and level. Then a layer of river pebbles of at least 10 cm is laid on it.
Then you can start laying the cuts. You need to have a building level and a rubber hammer on hand to ensure that the masonry is perfectly level. When installing wooden saw cuts, you should avoid both excessive deepening of the dies and their bulging. Most often, the dies are sunk into river sand by 6-8cm, leaving 4-5cm on the surface.
Read also:
Can you live in the village
After the wood cuts are laid out, it is time to seal the seams between them. To prepare the mixture required for an area of 5 m2, you will need: 1 kg of melted pork fat, 5 kg sawdust, 1 kg of lime, 2 kg of clay and some water. A container for preparing and thoroughly mixing the mixture requires 15 liters. The resulting mass should have the consistency of a paste. In order to increase the paste's resistance to moisture, it is recommended to add marble dust to it.
Using a small spatula, the paste must be spread into the spaces between the cuts, avoiding the slightest cracks and air pockets.
There shouldn't be any voids. The service life of the entire floor covering will depend on how tightly the mortar is laid between the dies.
The same mixture should be used to rub the cracks inside the wooden cuts, if any.
After sealing the seams, the floor is left to dry for two days. After these days, you need to inspect the floor again for cracks. If such appear, they should be covered up again.
And only after the solution has hardened and dried well can you begin the finishing process - polishing.
There are many various types decorative floor coverings, but a DIY floor will be especially pleasing to the eye. Floors made from wood cuts look very beautiful and create a durable coating. Not everyone can imagine what such a solution is, what its advantages are, and how to do it with their own hands.
Log cuts at the ends
Advantages of cut floors
All flooring materials, used by mankind, are made artificially, although they consist of natural raw materials. Solid parquet is produced using the technology of pressing and gluing lamellas. But if you pay attention to floors made of round timber, you can immediately say that such flooring is completely natural and natural. It will not cause harm to health, because the material is environmentally friendly. However, for the floors to last for a long time, you still have to cover them with synthetic protective equipment and varnishes.
Therefore, the above-mentioned advantage of naturalness also disappears. All that remains is to rely on other advantages that I would like to dwell on in more detail:
Installation of wood slices - like laying out a mosaic
- Mosaic. The floors look like they were made from a mosaic. Pieces are applied various sizes, textures and colors. Because decorative value of this material will give odds to many other species.
- Strength is determined by what kind of coating is under the stumps, how the elements are connected to each other and how they are protected. The type of wood also matters. It's no secret that oak slice much stronger than softwood.
This does not include the cheapness of the work, as many believe. Yes, you can get wood almost free and cut it thin layers, but to execute reliable connection parts, you will have to use a self-leveling floor made of epoxy or polyurethane. These products are not the cheapest, so you may even need more than three-dimensional floors. There are also a budget option– use of clay binder. But similar wooden surfaces do not have the strength that is required.
Attention! All the rumors about cheap flooring made from wood cuts are a misconception. The cost of finance and effort here is even greater than when arranging standard flooring.
Laying technology
All the talk about the pros and cons similar flooring will not lead to a final solution. To understand whether it's worth it, you need to understand the technology.
Requires strong and stable discs to withstand furniture loads
You can take wood of almost any species, but there are two requirements for it:
- Strength. The flooring must withstand heavy loads. If we take into account conifers- fir, cedar, pine or linden with poplar, then they are considered soft species. The hardness and strength of wood is measured using the Brinell scale. So, according to this scale, wood must have a strength reading of at least average level in order to be used for parquet flooring.
- Stability. The material should not dry out or change its linear dimensions, so the issue of wood stability also remains very important. Exotic tree species are immediately excluded from this criterion.
Oak has the two qualities described. Therefore, flooring made from oak cuts will become great solution. Regardless of the species chosen, it is important that the wood is dried. Usage wet material unacceptable. There are two ways to arrange flooring from saw cuts. Let's look at each of them briefly.
Do-it-yourself floor made from wood cuts. Method 1
Sand base
For this technology, end cuts of round timber with a diameter of 10-12 cm are suitable. But using the same diameter is not necessary. Show your rich inner world and imagination by beautifully using materials of various sizes.
In addition, you will need:
- clay;
- linseed oil;
- salo;
- water;
- wax;
- sawdust.
The material is laid like a mosaic, taking into account the minimum distance between adjacent parts, so the use of small elements in adjacent parts will be useful. The surface of the base is covered with a 10 cm sand cushion. On top of the fine-grained sand there are saw cuts that are pressed into it. Along the way, you will need to check the horizontalness.
Adjacent voids are filled with a special solution, which can be prepared according to the following recipe:
- fat – 1 kg;
- sawdust – 5 kg;
- lime – 1 kg;
- wet clay – 2 kg.
All this is stirred until a homogeneous structure is achieved. It is recommended to add marble dust or glass fragments to the composition.
Fill all voids with the finished mixture and level the floor. After the solution dries after 2 days, the final finishing begins by scraping and polishing with oil or wax.
Floor made of wooden discs. Method 2
Installation with adhesive composition
There is another way to create decorative flooring from wooden cuts. Pre-cut elements of the same thickness are placed on a prepared plywood base and secured to it with glue. The gaps between the elements are also filled with a special solution containing 20% sawdust.
After the solution has dried, begin sanding the surface, then the floor will become absolutely flat and smooth. Surface coating with sealant is the next step.
Attention! The bonding solution should not darken or change the texture of the wood, so you will have to experiment with the solution before using it.
The final finish is a self-leveling polyurethane composition or varnish coating. It is also possible to use epoxy-based compounds.
These are just the most common methods of arranging floors from saw cuts. But there are also options for laying on liquid concrete, which allows you to create a solid foundation. Which method to use is up to each individual to decide.
To highlight the natural structure of the material, it is recommended to use stain. This will give the flooring a touch of expensive wood.
Usage wooden cuts is not limited to sexual structures. They are used to decorate tabletops, chairs and walls. Such extensive areas of application of saw cuts are explained by the decorative nature of the material, which can decorate any interior without the use of additional finishing.
Making floors from saw cuts and sections of wood with your own hands is not so difficult. At the same time, you will receive a unique interior that will become your pride. Note that, in addition to round timber, you can also use rectangular bars. To some extent decorative similar flooring there will be fewer, but there will be fewer gaps between them. Therefore, the bulk composition will be used more economically.
The statement that making a floor from saw cuts with your own hands is not difficult, to put it mildly, is not entirely true - despite the fact that technologically it is decorative coating It looks simple, but in fact it is replete with a lot of different subtleties and nuances.
If you treat such a floor with disdain and underestimate the complexity of its manufacture, the result will be dismal - it will take several years, and the coating will have to be redone. Do you need this? To do this, to do this - at a minimum, such a floor should last for ten years. And at a minimum, its dismantling at the end of its service life should not entail a global, large-scale repair - ideally it should look like, for example, replacing linoleum or laminate. I agree, creating such a covering with your own hands is very difficult, but you need to strive for this - in principle, it is real, and we will tell you how to make such a floor from wood cuts with your own hands on this page of the Dream House website. But first, let's get acquainted with the advantages and disadvantages of such flooring.
Wood flooring photo
Advantages and disadvantages of a floor made from wood cuts with your own hands
Agree, almost all construction and Decoration Materials, which people use today to arrange their living space, are mostly of artificial origin. Even if they are not toxic and are classified as environmentally friendly pure materials, yet they do not have a natural origin, and from the point of view of the science of Feng Shui, their energy component tends to zero. But this is not the point - unlike them, wood (including its saw cuts) is a creation of nature, which is the first advantage of a floor made from saw cuts. There is no need to rejoice in advance - this is a double-edged sword. On the one hand there is natural wood, and on the other there are synthetic polymer binders that will have to be used as protective coating– in general, the situation from an environmental point of view is twofold and, most likely, negative factors they will win here and negate the entire environmental component of the floor.
By by and large, here we can highlight only a few advantages that can really be called the advantages of this sex. Oddly enough, this is a decorative component - in fact, it is something that can be done at your own discretion, creating various patterns. And save money by doing the installation work yourself. In my opinion, everything else is far-fetched. Judge for yourself.
But let's return to our strength - a good and durable floor from wood cuts cannot be made cheaply. Spending money for the short term is also a very dubious idea. By and large, nothing but unusual beauty, cannot offer such a gender to a person. This is purely my opinion, but if you think carefully about this issue, you will probably come to exactly the same conclusion. And while you are thinking, we will go further and tell you about two ways to make a floor from saw cuts with your own hands.
Floor made of wooden cuts: an option for a summer house
Why for a dacha? The reason is simple. This is a simplified version that does not involve the use of polymer binders. This floor can really be called environmentally friendly, and it will cost you a minimum. At the same time, the floor will lose strength, aesthetics and other characteristics. In addition, it cannot be washed in the literal sense of the word, since unprotected wood will quickly rot. Such a floor is made from saw cuts in a very primitive way.
Once everything is dry, the floor will need to be sanded. In order for such a miracle coating to last longer, each cut must be thoroughly soaked with an antiseptic. In addition, the wood must be properly dried before laying.
End-cut floors: durable technology
As in the previous case, all wood used for the manufacture of such floors must be well dried and treated with an antiseptic. To achieve different effects, it can be shaded using stain. An important condition creating such a floor is to strictly observe the thickness of the cut - if in the first case this moment of great importance does not, then differences of 1 mm will result in a large consumption of polymers, which will make the floor very expensive.
In this regard, it is better to think over a device that will allow you to make cuts with maximum accuracy. In addition, they also need to be made as thin as possible.
Such floors are made from saw cuts with your own hands as follows.
In conclusion to the topic of how to make a floor from wood cuts with your own hands, all that remains is to say a few words about self-made removable slats. They are made in exactly the same way, but not on concrete or wooden base, and on sheets of plywood, along the edges of which they are cut manual router connecting grooves. Believe me, it is not so difficult - but as a result you will get some semblance. The sizes of such fragments can be any - naturally, within reason, so that they can be easily laid with your own hands.
