Polyurethane stucco decor looks great painted. Designers use this with success, decorating interiors in original color schemes. In addition, painting polyurethane decorative elements has a number of practical meanings:
Polyurethane attracts dust, and its porous surface makes cleaning difficult. Painted elements are easier to care for.
The paint gives polyurethane products the appearance of expensive plaster stucco.
A correctly selected shade of paint will allow the stucco decoration to fit harmoniously into the interior without standing out as a “false note”.
On unpainted baseboards and moldings, joints are always noticeable, even with very careful installation. These defects can be hidden using putty and subsequent painting.
Paint selection
The main thing to consider when choosing paint: no solvents - they literally melt the material. Polyurethane paint should be on water based . The following types of paints are suitable:
acrylic- the most popular solution, thanks to affordable price, absence of unpleasant odors. Acrylic paint gives the product a matte tint, characteristic of gypsum stucco. The coating tolerates well wet cleaning, durable, not afraid of changes in temperature and humidity;
silicone- in addition to all the advantages inherent in the acrylic analogue, it has excellent dirt-repellent properties and a long service life. Great choice for finishing hallways, bathrooms, kitchens;
latex— the paint is characterized by increased wear resistance and is not afraid of moisture. You can choose paint for baseboards or moldings made of polyurethane with a glossy effect.
Impressive results can be achieved using decorative coatings for antique styling, ivory, craquelure. Light and pliable polyurethane “turns” into durable, heavy stone, antique metal - thanks to a thin layer of a special coloring composition.
Photos from official websites of manufacturers/brands: Orac Axxent, Orac Luxxus
It is recommended to paint facade stucco molding made of polyurethane after installation. For this purpose, special acrylic, latex, alkyd and polyurethane paints marked “for outdoor use”.
Among modern finishing materials, polyurethane has gained particular popularity. It is used for the manufacture of decorative elements, baseboards, and moldings. Externally, such products resemble stucco. For a more attractive look, it is recommended to painting polyurethane baseboards. Other finishing products painted will also look aesthetically pleasing.
Inexperienced craftsmen are faced with questions regarding paint preferences, consistency technological process. Right choice material for dyeing and step by step procedure will create an individual interior for any room.
Do I need to paint polyurethane baseboards?
Before choosing this or that paint and deciding on the method of applying it, it is a good idea to understand the importance of painting polyurethane skirting boards. Finishing masters believe that:
- A material such as polyurethane looks great in in kind. But it has the property of attracting dust and all kinds of contaminants, which does not contribute to the decoration of decorative stucco. Painting ceiling skirting boards made of polyurethane saves time for caring for elements. Washing painted products is faster and more convenient than cleaning dirt from natural materials.
- Installation of baseboards and moldings is often impossible without leaving joint gaps. Painting the floor skirting boards after preliminary puttying will avoid corner inconsistencies.
- The decorative effect of painted stucco is achieved by choosing any color shade paints.
These arguments support the decision to paint finishing elements ceiling, walls and floor.
What paint should I use?
The choice of coloring agent is quite serious, because contact with any solvent threatens to completely dissolve the polyurethane. So what paint should you use to paint polyurethane baseboards? Masters clearly believe that coloring raw materials should be chosen with a water base.
Such paints for polyurethane skirting boards are:
- Acrylic - odorless, absolutely harmless to health. Painted ceiling surfaces have a matte tint, which gives them a resemblance to plaster stucco. The products are easy to clean and resistant to changes in room temperature. The preference for this type of paint is of particular importance long term service, low cost, resistance to damage.
- Latex - have excellent resistance to moisture and mechanical damage. Besides, decorative elements When painted, foam panels acquire a glossy surface, which looks quite attractive.
- Silicone - have everything similar characteristics previous colors, plus additional property repel dirt.
The process of painting polyurethane skirting boards
If you are wondering how to paint ceiling plinth polyurethane, then there are two ways to do this:
- Before the actual installation of the elements.
- After installation.
Craftsmen often prefer the second method, since the result is a smoother surface after preliminary puttying of the corners.
If you want, and from one material, opt for polyurethane foam skirting boards. The advantages and disadvantages of products made of polyurethane, comparison with cornices made of other materials, how to fasten them are the topics of the article.
Read about detailed technology installation of polyurethane ceiling plinth, choice of paint, cutting, . The article will help you put finishing touch repair - hide the gap between the wall, ceiling/floor.
Polyurethane plinth - advantages and disadvantages
- The strength of polyurethane foam products allows you not to be afraid of mechanical influences - impacts. Polyurethane skirting boards are not subject to cracks and chips.
- Environmentally friendly - safe to use in any room, including a children's room.
- Big variety color solutions makes it simple, but you can use pure white or followed by painting in the required shade.
- Easy installation - you can use the gluing method.
- Ease of processing - the ability to cut to the desired size.
- made of polyurethane allows you to hide the joint even in round-shaped rooms.
The disadvantages of polyurethane products are their heavy weight - almost 2 times heavier than foam plastic, plastic cornice– and a higher price.
Ceiling plinth made of polyurethane with lighting
Flexible polyurethane products allow you to mask wall unevenness, and when installing cornices indoors complex shape simply irreplaceable. By evenly installing a polyurethane baseboard, you can emphasize the design of a stretch ceiling or a multi-level plasterboard structure.
Ceiling plinth made of polyurethane photo - with lighting
Installation of polyurethane ceiling products
There are two types of installation.
First. Installation of polyurethane ceiling plinth is carried out on glued wallpaper using Dragon glue, “Moment Installation” or white acrylic sealant.
Second. Installation of polyurethane products is carried out on plastered, primed walls/ceilings. Installation is carried out using putty or acrylic sealant. Then the wallpaper is glued. This method has advantages over the first method - the cornice and ceiling look like one.
Advice: If you have uneven walls, and you plan to change your wallpaper in the near future, use method number two. It allows you to efficiently, without cracks, frame the ceiling with polyurethane plinths, and you do not need to be afraid that the adhesive composition will not get on the wallpaper.Cutting polyurethane skirting boards
Before installation, the polyurethane product must be marked and cut at the corners.
First method. Get this job done. With its help you can get an even, precise cut.
Advice: If you do not have the skills to work with this tool, then practice. For this purpose, use trimmings of baseboards.Second method. If you are unable to use a miter box or the angle is not straight, then use a stencil, which can be made from cardboard or thick paper.
What to cut with? In both the first and second cases, cutting polyurethane plinths is done with a hacksaw for metal with fine teeth or construction knife with replaceable blades.
Polyurethane ceiling plinth photo - cutting using a miter box and a thin hacksaw with fine teeth
Installation of polyurethane skirting boards
How to glue a polyurethane product to the ceiling? It's better to do the most first difficult work– design of corners. Then add straight sections. Carrying out work in this sequence is easier than going around the entire perimeter of the room in order.
Let's look at an example of gluing a polyurethane baseboard to a ceiling using finishing putty or acrylic sealant.
List of tools:
- mounting gun;
- construction knife with replaceable blades;
- hacksaw for metal;
- rubber spatula;
- construction mixer;
- container for diluting putty.
Technology for installing polyurethane cornices using putty:
Stage 1. Using a construction mixer, add the putty poured into water - the amount of water and dry adhesive composition according to the instructions - to the desired consistency.
Stage 2. Using a spatula, carefully apply the mixture to the wall and the back surface of the baseboard.
Stage 3. Apply exactly to the installation site and press. Use a spatula, then a sponge or a wet rag to remove the excess and cover the cracks, if any.
Stage 4. After the putty has dried, you need to cover the cracks again.
Polyurethane ceiling plinth - installation video tutorial:
Technology for installing polyurethane cornices using acrylic sealant:
- Apply sealant to the baseboard using a glue gun, making sure that all uneven areas are filled with sealant.
- Press to the surface at the installation site and hold for 30 seconds.
- Remove excess with a wet cloth.
- Carefully seal the cracks after the sealant has set.
- Paint the ceiling and polyurethane baseboard.
- Put up wallpaper.
Installation of polyurethane plinth to a suspended ceiling
The main nuance is that a polyurethane product is glued only to the wall and in no case is attached to the ceiling, so as not to damage the expensive canvas.
Advice: Before starting work, protect the canvas from accidental contact with the adhesive mass using a polyethylene film. After installation it can be easily removed.Further stages of installing polyurethane skirting boards suspended ceiling absolutely identical to the above methods. It must be taken into account that the large weight of the products does not allow the use of wide, massive polyurethane skirting boards, because they can sag under their own weight. If you have high ceiling and you like stucco, use a wide decorative polystyrene foam cornice.
Installation of polyurethane floor plinth
Let's look at an example of fixing a polyurethane product to a wall/floor using glue-putty, produced like silicone in cartridges.
Installation is carried out on walls leveled with putty and primed.
Wide polyurethane floor plinth
Technology for installing polyurethane floor plinths:
Step 1. Cutting corners using a miter box. If the angles are not right, then it is advisable to use a two-plane miter box.
Step 2. Open the putty cartridge and insert it into the mounting gun.
Step 3. Apply 2-3 longitudinal even strips of adhesive mass to the polyurethane product, so that the putty layer covers the gap between the polyurethane product and the wall as much as possible. To do this, apply a polyurethane floor plinth without glue and inspect the gap.
Step 4. Press the polyurethane baseboard against the wall and let it set.
Step 5. Remove excess putty with a wet sponge.
Step 6. Check for any cracks. Add glue to places where there was not enough. Remove excess.
A distinctive feature of this glue-putty from acrylic glue for polyurethane skirting boards is that it does not shrink.
Flexible polyurethane floor plinth
Advice: If the walls are very uneven, then in places of greatest curvature you need to support the glued product with something heavy. For this purpose, you can use bags with construction mixture.How to paint polyurethane baseboards
They start no earlier than one day after installation.
Advice: To protect the walls, ceiling/floor, you need to cover the areas adjacent to the polyurethane baseboard with masking tape or a strip of wax paper. After work, it can be easily removed without damaging the surface underneath.
White polyurethane floor plinth in the interior
If your flooring has a texture and color, then the polyurethane baseboard for the floor should be painted one or two shades lighter. For this purpose, you can use waterproof dispersion paint. It is better to paint polyurethane baseboards using a spray bottle, but you can buy ready-made paint in aerosol packaging.
Solid polyurethane ceiling plinth with stucco elements, painted white
There are unpainted skirting boards on sale, both floor and ceiling, primed with white primer. By selecting oil paint For the product, you can arrange both a matte and glossy surface. Water-based paint will give the polyurethane baseboard a matte finish. Acrylic paint will “bring” gloss.
Advice: It doesn't matter what kind of paint you choose. It is necessary to create unity of the polyurethane plinth with the interior of the room so that it does not look like an alien object in the renovated room.Let's try to figure it out practical nuances this process.
In what cases is it necessary to paint skirting boards?
Many readers believe that painting ceiling skirting boards is done only in cases where it is required interior design premises. That is, this procedure is purely aesthetic in nature.
But there is a rather important point here. Painting ceiling plinths significantly strengthens them and allows you to hide them. small scratches and dents that often appear during the process installation work or during transportation of products.
As a rule, the natural color of foam baseboards is white, which means that after a certain time the material will begin to turn yellow or become covered with dust and acquire a grayish tint. Painting protects them from such troubles.
Practice shows that painted foam ceiling plinths have a longer service life than those without painting.
Thanks to this factor, you benefit economically, even despite the additional costs associated with purchasing painting materials.
If you still have doubts about whether you need to paint your foam ceiling moldings, find photos of rooms with painted and natural fillets, and then compare them. In most cases, users choose the first option (painted skirting boards).
When and with what to paint
Even a person with no experience repair work will say that painting ceiling fillets is much more convenient before installing them, right?
In this case, there is no need to constantly move the stepladder from one place to another and work in an awkward position. Another positive point– during the painting process you will not stain the walls and ceiling.
On the other hand, after installing painted foam baseboards, gaps usually form (due to uneven surface walls and ceiling), as well as joints between individual parts of fillets. They need to be sealed with putty and painted again.
Considering the above arguments, we can say that the choice of method for painting ceiling skirting boards depends solely on your personal preferences.
Important point! When choosing paint for foam baseboards, carefully study the information about it. Do not use formulations that contain solvents. Polystyrene foam is a very “delicate” material, designed for the use of water-based paints.
Experts advise buying the following types of paints:
- acrylic;
- latex;
- polyvinyl acetate.
In case you can't find paint desired color, make it yourself using a white solvent-free composition and the necessary dye.
To paint foam ceiling fillets you will need:
- brush;
- putty knife;
- capacity;
- dry rag;
- paint the desired color.
Quite often, the design of a room stipulates that the ceiling and baseboards should be the same color.
In this case, before you start painting, be sure to cover the floor with film and thick cardboard. This is necessary to protect the flooring from paint and marks left by the stepladder.
Having figured out how to paint the ceiling plinth, you need to pay a little attention to the tools that are used to perform the work presented.
To paint embossed skirting boards, it is better to use a thin brush, which allows you to apply the paint evenly even on very complex patterns. For smooth surface For ceiling fillets, a wider brush will do.
When painting installed ceiling skirting boards, be sure to use a wide spatula.
It is needed to prevent paint from getting on the walls and floor. Right hand you paint the fillets, and with your left hand, hold the spatula at an angle to the baseboard (the paint gets on the spatula). For these purposes, you can use a piece of plastic or thick cardboard.
Preparatory stage
Before you begin painting the installed foam ceiling skirting boards, you must carefully prepare them for this procedure.
- 1. Prepare tools and materials (spatula, dry rag, sandpaper, water, putty and silicone sealant).
- 2. At the next stage, joints, cracks and mechanical damage to the baseboards are sealed. To eliminate defects in the corners of the room, apply the putty with your finger (work with gloves!).
- 3. Excess putty is wiped off with a wet rag.
- 4. When everything is dry, you can clean out the uneven areas using sandpaper for this purpose.
If you have completed preparatory work, following the instructions provided, then you can safely start painting.
Painting
IN in this case you will need a place with low humidity, without drafts, so that there is no direct sunlight.
It allows you to paint quickly and much better than using a brush. In order to prevent streaks from appearing on the baseboard, try to keep the can of paint at a distance of 30 cm from the surface to be treated.
Before you begin painting the installed foam baseboards, you must thoroughly clean them of dirt and dust.
To prevent paint from getting on the ceiling and flooring, it is best to use masking tape. Fix it as close as possible to the fillets so that there are no gaps between the tape and the baseboard.
The painting process will be much easier if you decide to make the ceiling and fillets the same color. The first one is painted with a roller, and the baseboard with a brush. After the paint has dried, you need to repeat this procedure.
Important point! Ceiling plinths are painted in at least two layers, regardless of the type of paint, the chosen method of work and other factors. Otherwise, in a few months you will have to paint the ceiling skirting boards again.
If, according to the repair plan, your ceiling and fillets should be different color, then, first of all, the ceiling is painted. In this case, as already mentioned, it is necessary to use masking tape, which will prevent the paint from getting on the ceiling.
Non-standard methods of painting ceiling fillets
Lovers original ideas on the design of the premises will definitely be of interest non-standard methods painting ceiling plinths.
For example, fillets with large, embossed patterns can be given the appearance stone surface. To do this you need:
- 1. Glaze of the appropriate shade is applied to the surface of the baseboard.
- 2. Using a brush, make small light strokes.
- 3. The surface is covered with dark spots (Umber glaze is used).
- 4. Small strokes of dark shades are applied.
- 5. All excess is removed from the surface of the baseboard.
- 6. After everything is dry, touches of a bronze shade are applied.
- 7. The fillets finally dry out and become like a stone surface.
A good designer will definitely figure out how best to combine these ceiling plinths with other design elements of the room so that it acquires a harmonious and original look.
Thus, painting foam ceiling plinths turns into a real art. You have the opportunity to get not only the “stone effect”, but also other interesting colors and shades:
- Malachite.
- Patina.
- Gold.
- Aged wood.
But do not forget that the listed options can only be used if they “fit” into general design premises. “Golden” or “malachite” skirting boards are unlikely to be suitable for a room decorated in a modern style.
In the process of preparing ceiling plinths for painting, you can use a vacuum cleaner to remove dirt and dust, construction hair dryer to remove old paint, and a “grinder” or drill to eliminate unevenness on walls and ceilings.
Before using masking tape, be sure to check how firmly it adheres to the surface. It's possible that when you remove the tape, it will pull out fresh paint, decorative items, etc. In such situations, it is better to use a regular spatula or cardboard to protect the floor and walls from paint.
Even if the natural color of foam baseboards suits your space perfectly, it is better to paint them white too. This will protect the fillets from dust and yellowing due to ultraviolet radiation.
After studying this topic, you know what and how to paint the ceiling plinth so that this procedure is successful and your room becomes more comfortable and attractive. You are also convinced that this type of repair work is deservedly considered simple and does not require special skills or education.
It is an element that is necessary for the final design of any interior. It gives a feeling of completeness and cleverly hides the joints of the materials used to finish the floor and walls.
But not everyone knows that they are different and are made from various materials. Let's take a closer look at the polyurethane floor plinth, its pros and cons, and installation features.
Huge popularity for last years I found a polyurethane baseboard for the floor, unlike analogues made from other materials.
This is largely due to:
- Resistance to external factors and long service life: if you treat this type of skirting boards with care, it will retain its original appearance for at least 25-30 years. In addition, during its entire service life you will not see that the baseboard is susceptible to water/steam, and also does not absorb odor and is very convenient to clean. Such skirting boards are used in the bathroom, as they can withstand high humidity very well.
- The fact that it is not sensitive to temperature changes, which means it is perfect for rooms where there are a lot of heating devices. Thanks to heating, it does not deform, retains its original shape and does not dry out.
Important: If you need to decorate a place located next to the fireplace with a plinth, you should use a polyurethane plinth.
Features of use
The main function of flexible polyurethane floor skirting
Selecting skirting boards: how to achieve a successful combination?
It would seem - what could be easier than going to the store and purchasing a polyurethane baseboard? However, even choosing this element requires good taste, otherwise this small detail can ruin everything.
When choosing, you should take into account the following data:
- Style/color.
- Color design and texture.
- Finishing material and coating color.
It cannot be said that bold experiments involve only the use of contrasts, but choosing the right shade and doing everything tastefully is not as easy as it seems. Therefore, we recommend using traditional model color choice: the baseboard should be different from flooring by 1-2 tones.
If your reference point is not the floors, but the walls, then it will be easier to take ready-made samples take it with you to the store - this way you will reduce the likelihood of a mistake. It's not that difficult to "match" the color to the floors and walls, but things get more complicated when you take into account doors. An excellent design move would be to create a smooth transition of shades from the baseboard to the door trim of the same color, which will help create the effect of an unbroken line.
Choosing a plinth by size
Floor polyurethane plinths come in different varieties, and they are chosen based on several indicators: interior design, room size and ceiling height. Naturally, for small rooms it is better not to use high and wide baseboards - it is better to give preference to thin samples that will not take up much space and will visually outline the perimeter of the room.
But the use of thin skirting boards is unacceptable in large and spacious rooms, as they will only disrupt the perception of space and spoil the overall geometry. Opt for wider designs that attach directly to the wall.
The standard size of the plinth is 0.45-0.7 cm, but on sale you will probably find a wide variety of models that will be both smaller and larger than the specified parameters. Flexible polyurethane floor plinth can reach up to 20 cm. The main thing is that the height of the room allows for such “acceleration”.
Price of polyurethane skirting board for floor
It would be wrong to say that polyurethane skirting boards are expensive, but at the same time, it is better to familiarize yourself with the prices for them in advance. You should also pay attention to the installation of skirting boards. The installation price can be significantly higher than purchasing the material, and before calling a specialist, you should find out about his experience and reviews.
For example, we suggest considering pricing policy TOP companies that sell their products at affordable prices:
| Manufacturer | Dimensions (w*d), cm | Length, cm | Material | Price, r/piece | |
| Orac Decor | 0,2*0,2 | 200 | duropolymer | 220 | |
| NMC | 0,19*0,12 | 250 | |||
| Perfect Plus | 0,54*0,15 | 278 | |||
| 0,79*0,13 | 332 | ||||
| 0,69*0,15 | 345 | ||||
| Fabello Decor | 0,3*0,2 | 244 | polyurethane | 378 | |
| Europlast | 0,7*0,17 | 200 | Composite material | 410 | |
| 0,8*0,22 | 539 | ||||
| Perfect Plus | 1,26*0,16 | 200 | Duropolymer | 783 | |
| 1*0,15 | 854 | ||||
| Polyurethane | |||||
| Fabello Decor | 0,8*0,12 | 240 | 954 |
As you can see, the prices are reasonable, and there is nothing more expensive than 1000 rubles, but such skirting boards are worth the money, as they perfectly transform the interior and add sophistication. After considering all the benefits, you can decide whether you need a polyurethane baseboard. Their prices are affordable, and the installation procedure is so simple that even a person who has no experience in repair work can handle it.
Installation of polyurethane floor plinth
Rule
The more thoroughly you prepare the surface, the better and easier it will be to fix the baseboard. To do this, use silicone or polyurethane glue. It should be applied to the back side of the baseboard and the corner cut area.
More in a simple way fastening will use nails or self-tapping screws. They are hidden using overlays, which are sold in the same place as baseboards. You can easily choose the right shade.
Advice: If you decide to install the plinth yourself, do not expect that everything will work out the first time, especially the perfect cuts. It’s better to leave a margin of at least 10 cm so that you can correct mistakes later if something happens.
No less attention should be paid to transporting skirting boards. Since polyurethane is quite fragile and requires careful handling, in order to avoid breakage, be careful during transportation. And to successfully adapt the material to your conditions, leave it to stand in the house for at least a day.
Beginning of work
Before you begin, make sure the surface is perfectly clean and dry. It is important that during installation everything Finishing work The walls and floors were already completed. For neat and even placement, markings should be made that will help create an even mount. To begin with, we do everything as evenly as possible - attach one element to the corner of the wall and make a mark along the edges. When crossing the line, they will indicate exactly where the cut should be.
Typically the angle is 90 degrees, but there are interesting cases where additional adjustments need to be made.
Cutting flexible polyurethane baseboard for flooring
After you have made the necessary markings, you can proceed directly to trimming. If everything is done according to technology, then it is better to use a miter box, which allows you to cut correctly and with small errors. According to reviews, using this tool significantly simplifies the process.
According to different stencils, the miter box makes cuts from 45 to 90 degrees. To make a straight joint, use a 90 degree stencil. And to design a corner it is better to use a 45 degree stencil.
The sequence is as follows: insert the plinth into the miter box on the left so that it is pressed against the side. Next, insert a hacksaw into the desired stencil and cut it. If you decide to do without this tool, you can use sharp knife or miter saw with small teeth.
Important: For economical consumption materials, the corners are first trimmed, and only then the plinth is adjusted to length.
The most simple solution in this situation there will be a purchase of accessories that are intended for this purpose. Such elements will simplify installation and save you from difficulties. The only thing you should not forget about is that if the corners and walls are too uneven, problems with fastening may arise ready-made elements. In this case, it is better to do the pruning yourself.
We fix the baseboard ourselves
The most common method of fixing skirting boards is gluing. For this they choose special composition. We have prepared several for you practical advice according to the choice of adhesive:
You need to glue the baseboards from the corner of the room, and apply glue to the back side of each element. WITH reverse side you will find grooves called shelves. They are needed to distribute the glue evenly. For High Quality coat the joint and groove. The baseboard should be held with your hands until the glue sets. Sometimes this can last up to 20 minutes.
If the panel comes off in some place after drying, use a small nail. The glue will set completely within 24 hours, and at this time you will be able to pull out the nail. You can mask the holes with putty and paint.
Finally, remove any remaining adhesive. To do this, use a spatula or a sponge soaked in water. To fill voids, use clear sealant, then fill and paint.
You can paint the baseboard with either water-based paint or acrylic paint, and glaze. You can apply paint using an aerosol (use masking tape to protect the walls) and a spray gun.
Tips for painting polyurethane floor skirting boards
A few simple but effective tips will help you paint baseboards at home.
Advice: Also, do not neglect the manufacturer’s advice, which is always indicated on the paint container. The drying time and application features are also indicated.
