For registration ceiling surface use different materials, but one of best options It is considered that plastic panels are attached to the ceiling. High quality and the variety of textures make it possible to use them in rooms with different purposes, including those with high humidity.
This finishing material is distinguished by its low cost, stylish design, beautiful appearance, but before carrying out repairs yourself, it is important to figure out how to mount it on the ceiling plastic panels.
Pros and cons of plastic ceiling panels
A finishing option such as PVC fastening panels on the ceiling has many advantages and positive characteristics. Sheathing with this material allows you to level the base of the ceiling without plastering, resulting in repair work it will require much less financial and time costs.
Another important advantage plastic finishing products - moisture resistance. Thanks to this quality of polyvinyl chloride, the panels have proven themselves to be excellent in rooms with constant high level humidity, such as the bathroom and toilet.
An important quality plastic sheathing is the possibility of its partial disassembly. For example, if it is necessary to repair electrical wiring, it will be enough to remove several panels in a certain place. After completion of the work, the plates are returned to their original place without any effort.
After attaching plastic panels to the ceiling, housewives do not need to take special care of them, since they just need to be wiped soft cloth or a sponge soaked in soapy water.
This method of decorating the ceiling surface has not only advantages, but also disadvantages. In case of fire plastic products, which occurs at temperatures above 350 degrees, the material releases toxins that are extremely harmful to human health.
Before attaching plastic panels to the ceiling, it is advisable to take into account that they do not react well to sunlight and therefore, over time, they begin to turn yellow and in some places lose their original color. And the most basic disadvantage is sensitivity to mechanical damage. Even a lightly applied point blow can damage an entire plate.
Materials and tools
Before attaching plastic panels to the ceiling, you need to perform a number of preparatory measures. First of all, from a huge assortment building materials available in specialized shopping centers, you need to choose the right quality plates that differ in parameters, colors and textures.
Single-color and multi-color products are available for sale, the surface of which is:
- glossy;
- matte;
- structured.
According to their shape, the planks are divided into:
- rectangular;
- square.
Mirror plates, as well as panels, are now becoming increasingly in demand. appearance which imitates stone or natural wood. Huge selection The material allows you to create a coating that fits perfectly into the interior of the room. When starting work like attaching panels to the ceiling, you need to have dowels, screws at your disposal, and to assemble the frame - hangers and profiles.
The sheathing process cannot be carried out without the following tools:
- painting cord - required for marking;
- metal square;
- building level;
- drill plus impact attachment or hammer drill;
- screwdriver
Before attaching PVC panels to the ceiling, you should decide on the type of frame, the distance between the rough base and the structure under construction, and the location lighting fixtures and the direction of installation of the strips.
So that during the installation process you do not have to urgently go to the store for building materials, experts advise calculating the required amount of profile in advance. To do this, you need to determine the area of the ceiling surface in the room and the parameters of one plate. You should buy panels with a small margin.
Assembling the frame on the ceiling
Before fixing PVC panels to the ceiling, it is necessary to build a special structure. When choosing a frame, they take into account their own financial capabilities, installation conditions and personal preferences of property owners. Horizontalness depends on the quality of the assembly plastic surface and general view of the ceiling structure.
When assembling the frame, you need to pay attention to a number of points:
- Metal profiles or wooden blocks, thanks to which the PVC panels will be attached to the ceiling, should be mounted perpendicular to the direction of installation of the plates.
- When it is planned to lay communications, for example, electrical wiring, then the frame should be placed at a distance of 10 - 12 centimeters from the ceiling base.
- First, determine the lowest corner in the room. To do this, measure their height from ceiling to floor. Having found out the minimum of them, this value is taken as the mark according to which the structure will be mounted. Then a horizontal line for the location of the lower part of the frame is drawn along the perimeter of the room.
- To enhance the resistance of plastic to high humidity, you can use silicone sealant. It is squeezed out between profiles or bars when assembling the frame, but before attaching PVC panels to the ceiling. It is necessary to pay attention to the arrangement of the frame Special attention, since the quality of finishing and future view structures after completion of installation.
How to attach plastic panels to wood sheathing
According to the technology, before attaching plastic to the ceiling, a metal or wooden frame must be completely ready, the type of which depends on several factors. In dry rooms with a minimum level of humidity, where there are practically no drafts, wooden blocks or slats are usually used, since they are cheaper and it is easier to assemble such a structure.
Collecting wooden sheathing, before attaching the panels to the ceiling, you need to follow certain rules:
- Dry wood must be treated with antiseptic compounds.
- The distance between adjacent slats or bars cannot exceed 40 centimeters.
- During the installation of the sheathing, you need to constantly make adjustments using small pieces of wood or chips, placing them under the bars. You can also stretch twine or painter's thread and thereby simplify the process.
- Before attaching the plastic to the ceiling, a special profile is mounted, which is a structure resembling a plinth with a recess along its entire length. The panel is attached to the sheathing with the “groove” side using nails, screws or staples. As for the “tenon” side, it is inserted into the recess of the baseboard.
- Next, the plates are installed in the same way to the end of the ceiling surface. There is a nuance in how to secure the last panel to the ceiling.
The plastic should only be inserted into the frame and not fixed. - At the final stage, a ceiling plinth is attached to the wooden sheathing, which will close the gaps between the walls and panels. As a result, the ceiling takes on a finished look.
Fastening PVC strips to a metal frame
The metal structure, before attaching the plastic panels to the ceiling, is constructed in rooms where wooden sheathing cannot be installed, because there is high humidity and constant drafts.
The work of installing a metal profile consists of several main stages:
- The profile is attached to the ceiling with self-tapping screws.
- Fixed with dowels mounting profile along the perimeter of the entire room, focusing on a horizontally drawn line.
- A transverse profile is attached to the rough ceiling surface, serving as the basis for plastic panels.
- An L-shaped profile is installed around the perimeter of the room, fixing screws on the mounting profile.
- Before attaching PVC panels to the ceiling, you need to measure their length relative to the size of the ceiling surface, cutting off excess material using a hacksaw.
- The remaining plates are attached to each other one by one using the tongue-and-groove method.
- There is a peculiarity in how to insert the last PVC panel onto the ceiling. The trim located in the last row is fixed by installing a finishing corner.
- As in the case of using sheathing, the ceiling plinth is installed in order to eliminate the gaps that appear at the junction of the plastic planks and the walls.
Regardless of the type of frame, installation of the planks should be done as carefully and accurately as possible so as not to damage the cladding material. Before you insert the last panel on the ceiling, you should make sure that all elements of the ceiling structure are located evenly, without displacements or distortions, otherwise they will require dismantling.
If you follow the advice of professionals when performing installation work, then there will be no problems with decorating the ceiling surface using plastic boards:
- You need to cut off the panels and drill them face up, for which you use a hacksaw, hand saw or a construction knife.
- It is advisable to immediately apply the glue to the wall, for which liquid nails are ideal.
- When working with a hammer, driving nails, you should avoid hitting the plastic, as the panel will immediately become unusable.
Very often, recently, walls and ceilings are covered with PVC panels.
Of course, most often you need to use lathing to do the installation, but it is also possible that this can be done without using it. Fastening PVC panels to a wall without lathing is done using special glue. 
Fastening PVC panels without using lathing
If you need to install PVC panels without using lathing, you will need to take such materials.
When all the tools are ready, you can proceed directly to installing the PVC panels to the wall.
To do this, you will first need to completely clean the entire surface of the wall, and you will also need to completely degrease this surface.
At the same time, the main thing to remember is that installation of PVC panels without using lathing can only be done on a flat surface.
There are 2 most popular brands of glue that can be used for installing PVC panels - these are, «
Titanium »
And,«
Moment - installation".
If glue is used, "Moment - "montage", then you will need to use a gun, glue, "Titanium"- this is glue that is in a regular plastic bottle. 
Once the wall is completely dry, you can begin gluing the panels.
To do this, you will need to apply the glue pointwise to the desired surface. In this case, the distance between the points should be about 30 centimeters. You will need to apply the glue to the panels and wait about one minute for the glue to soak in, then apply the glue to the wall and press the panel against the wall for a few seconds.
In order to glue PVC panels, always use a profile for attaching PVC panels. 
There are the following profile elements:
1) Starting profile. This type of profile covers the entire end faces of the panels. It can also be used to join panels to window and door openings.
2) F - shaped profile. Used for decorative finishing of various end surface elements.
3) Connecting profile. Used to connect profiles to each other. 
4) Internal corner. This element is capable of closing connections from the inside.
5) Universal angle. With its help, you can close the necessary places both from the outside and from the inside.
What each of these elements looks like can be seen in these photos.
Methods of fastening PVC panels
You can fasten the panels with or without lathing.
If lathing is used, then nails, screws or self-tapping screws are used as fastening materials, which are attached to the wall thanks to the lathing.
If lathing is not used, then PVC panels are attached to the wall using glue or liquid nails.
In conclusion, I would like to note that fastening PVC wall panels without using lathing can be done using liquid nails or special glue.
I would also like to remind you that PVC panels can be glued to the wall only if the wall is perfectly flat and before work it is necessary to thoroughly wash and degrease the wall.
You can also watch a video on how to install PVC panels on the ceiling
In an age of domination tension technologies It is not often necessary to attach plastic panels to the ceiling, but still, in rooms such as a bathroom, pantry or small kitchen, we sometimes resort to this repair option. Let's find out whether it is possible to do this type of finishing correctly without the help of specialists?
PVC materials have long been thoroughly integrated into the construction life of millions of people. A large sector was occupied by panels - simple and practical option finishing, easy to install and in most cases inexpensive. PVC is very light, is not afraid of moisture, and the coating or pattern on this material never fades if we're talking about about a quality factory manufacturer. It is also enough to simply wipe with a damp cloth to restore shine and beauty.
PVC ceiling panels
Naturally, one can also find flaws in the use of such cladding. PVC panels need to be looked after, that is, wiped, especially if they are matte white products. If this is not done, then over time, especially in the kitchen, they turn into very unsightly and no longer washable. You can also complain about the fragility of such a finish - champagne inaccurately opened to the ceiling can easily pierce the panel with a cork, which, however, can be easily replaced if you have a couple of pieces left in stock after the repair. These are all losses in the direction of simple whitewashing, but compared to tension PVC ceilings The cladding loses in aesthetics; here the seams are almost impossible to hide.
As a rule, panels are chosen for the ceiling white or beige. This is due to a long tradition, the ceiling symbolizes the sky and the light from the sky, and the light one is almost white. It also creates the effect of increasing space - the room seems taller. However, in stores you can find ceiling panels of various colors, with patterns, geometric shapes, and with relief texture. You can also find glossy, matte and even imitating brickwork.
Ceiling panels can be suture or seamless. With seamless panels, when assembled, the side borders are practically invisible and the entire ceiling appears to be one whole. But still, if you look closely, you can see the joints, and this causes a kind of discomfort. To avoid this, they came up with panels whose joints are masked with their own texture or pattern. The ceiling turns out striped. To avoid it becoming too banal, alternate wide (10 to 20 cm) white stripes with inserts of short stripes of a different color or shade. The most common inserts resemble silver or gold plating. Select it yourself different colors you won't have to. The panel itself, which is about 25 cm wide, already has a striped pattern.
For all work you will need some tools:
- laser or water level (necessary for marking a horizontal line);
- hammer drill with a Pobedit drill (drill holes in the ceiling to attach the frame);
- screwdriver (attach the screws in the panel to the frame);
- segment knife (also called an office knife, it can be used to cut panels lengthwise);
- jigsaw or hacksaw for metal (for cutting panels across);
- ring drill (or “crown”, for holes for ceiling lights);
- liquid nails (for gluing last panel);
- roulette;
- marker.
Tools for installing a plastic ceiling
Any ceiling plastic panels are mounted on. Its material can be different, but only two are used everywhere - a metal profile (the same as that used when installing drywall) and a wooden one. It is not advisable to use wooden blocks in rooms with high humidity such as bathrooms and toilets. This is due to the fact that wood can swell from moisture, and then the ceiling panels on such a frame can “sink.” In kitchens or living rooms a wooden frame is quite suitable. Many craftsmen also use it in bathrooms. wooden frames, citing the fact that the metal profile will rust from moisture, and the wooden blocks are not so large as to change greatly in size, and this requires as much moisture as if the block itself had been placed directly in water.
If the room has a perfectly flat ceiling, for example, after plastering, or there is a solid floor slab, and there is no need to install lighting, you can attach the panels with liquid nails.
Attaching plastic panels to the ceiling always comes last. The walls and floor should already be ready in the room. If the bathroom has tiles, then to install PVC panels it is necessary to leave space between the top row of tiles and the ceiling itself. This is due to the fact that attaching the frame to ceramic surface extremely inconvenient. Holes in the tiles are drilled with special drills and there is always a risk of splitting them.
When you have figured out the materials and tools, it’s time to look at how to properly organize the entire process of lining your stream and for this we will draw up instructions.
Ceiling cladding with plastic panels
How to decorate a ceiling with plastic panels - step-by-step diagram
Step 1: Frame
Before installing the frame, a horizontal line is “beaten off” and a 2x3 cm block is attached along this line along the perimeter of the room. Then, using dowel-nails, a lattice of the same wooden bars is “aimed” to the ceiling so that the lower border is in the plane with the side bars on the walls. The distance between the slats is 40–50 cm. As a result, the frame is rigidly attached. If the ceiling is uneven, the joints of floor slabs or the slope from one wall to another, then it is necessary to lay the right size blocks under the main lattice, achieving a horizontal line at the bottom of the frame.
A frame made of a metal profile is mounted in the same way as a wooden one, only it is not shot, but suspended using special adjustable hangers. They can be used to adjust the height of the ceiling and thereby level the plane horizontally for attaching panels to it. Self-tapping screws are used to connect frame elements. If lighting is provided on this ceiling, then it is necessary to install a frame approximately 12–13 cm from the surface, since standard lamps have a height of about 10 cm.
Step 2: Start Profile
Now you can start attaching the panels themselves. First you need to install the starting U-shaped profile around the perimeter of the frame using a construction stapler or self-tapping screws. And leave one wall without a profile. This is needed for the final panel and this profile will be attached with it in the last step. Next you need to cut the panels to the length of the room. Any plastic panels are sold in lengths from 2.5 to 3 meters. As practice shows, you need to cut not end-to-end, but one or two centimeters less so that the panel fits freely into the grooves of the starting profile.
Step 3: Installation of panels
Take your time and carefully examine the first panel. It has locks on both sides. Place it on the ceiling and see how the panel will be attached to the block. If the edge of the lock fits tightly to the frame, then the panel is installed correctly, and if it hangs in the air, then turn it the other way. The lock of the first PVC panel, which will fit into the starting profile, must be cut. This can be done simply with a regular segment knife. Insert the panel with the cut part into the starting profile and align it so that the lines of the joints or pattern are parallel to the wall.
Next, use small self-tapping screws to attach the panel to the frame inside the lock. Some masters use for this construction stapler, but the brackets have a very small clamping area - even with a slight load they break through the plastic and the panel sags. The next PVC element is inserted into the lock of the first panel and covers the screws. It is attached to the frame in the same way as its previous neighbor.
Step 4: Electrical
Think through the entire electrical part under the ceiling in advance. Route the cable to the places where the lamps will be installed. They should not lie on the panels; the wiring must be attached to the frame. When the panel with the lamp is installed, you need to immediately drill a hole in it with a ring drill and insert the wire into them. Better yet, do not hesitate, connect and insert the device into place. U simple lamp for lamps general purpose internal diameter 60 mm.
Step 5: Last Panel
For installation, you need to cut it to width, measuring the remaining distance without taking into account the lock. A U-shaped profile is put on the cut-off part and glued to the slats with liquid nails. Since the lock on the last panel will be cut off, screwing it in with self-tapping screws will look very ugly. Therefore, the finishing touch will be to install a special plastic plinth around the entire perimeter, which will hide all the irregularities and joints.
PVC panels are a popular finishing material that is durable, practical and affordable. Such coatings can be used for cladding walls and for decorating ceilings. Installing plastic panels is quite simple and quick. It is quite possible to cope with such work on your own. Today we will talk in more detail about how to attach PVC panels to walls.
Advantages and disadvantages
Plastic panels are a popular and common wall covering. They can be found in many stores that specialize in selling finishing materials.
Wide sheets and linings made of plastic are in great demand because they have many positive qualities.
- First of all, it should be noted the durability of such finishing materials. In our climate, their service life can be more than 20 years.
- Such materials are wear-resistant. They are not afraid of dampness and moisture. In addition, they are not susceptible to rotting, like natural wood.
- Plastic panels do not require complex and regular maintenance. Dust and dirt do not accumulate on their surface. If the finish gets dirty, it can be cleaned using regular damp cloth.
- PVC panels have soundproofing properties, making them ideal for wall cladding.
- Using plastic panels, you can divide the space into functional zones.
- Plastic panels are lightweight materials, which makes them quite easy to work with. All processes can be handled without the involvement of assistants.
- Plastic is a very malleable material - it can be easily various types processing. Therefore, in stores you can find PVC panels with a variety of colors, textures, prints and patterns.
- These finishing materials can be used in the interiors of the most different styles. The only exception would be elaborate and pompous ensembles, which should contain exclusively expensive and natural elements.
- You can install plastic sheets both in a city apartment and in a private house.
- Behind the panels you can hide various communications, for example, electrical wiring.
- It is quite possible to install PVC panels on walls with your own hands, since this process is not complicated and inaccessible. To do this, you do not need to stock up on expensive tools.
Of course, PVC wall panels are not ideal finishing materials. They also have their own weaknesses.
Knowing all the advantages and disadvantages of PVC panels, it will be easier to work with them. You can avoid many mistakes during the installation process.
Criterias of choice
Polyvinyl chloride sheets produced by different manufacturers have different properties and performance characteristics. At the time of buying suitable material it is necessary to pay attention to its quality - this main criterion, which should be relied upon.
- their stiffeners have damage (even barely noticeable) or are completely deformed;
- the stiffeners protrude too much;
- if the lines of the design on the front half are poorly defined, and there is also blurring of the edges;
- scratches and other minor damage are visible on the surface of the panels;
- lamellas from one set differ from each other in shade and brightness (such a finish will look inharmonious and awkward on the walls);
- panels from one set have various sizes(in this case, the finishing installation technology will be noticeably more complicated, since elements of different sizes will not be fixed properly).
Pay attention to the decorative layer of the panels. Any drawings, prints and paints should not be blurry or too dull. These features may indicate low quality material. Such coatings will quickly lose their original appearance.
Currently, in stores you can find polyvinyl chloride panels made in China and Europe. European products are considered to be of higher quality.
When choosing a suitable material, you need to pay attention to its density. It is this parameter that determines how durable and wear-resistant the panel is. This indicator is influenced by the number of rigid ribs that are located in the inner part of the sheets.
The optimal indicators are:
- thickness of the front side – 2-1.5 mm;
- number of stiffeners – 20-30;
- total weight of the part is 2-1.7 kg/m2.
To make sure the material is reliable and durable, press it with your finger. The front side of the panel should bend slightly under its pressure, and then quickly return to its original state. If the lamella is severely deformed, this indicates that it contains a large amount of chalk - such materials do not last long and are very fragile.
Preparatory stage
If you decide to install PVC panels yourself, then you should adhere to a specific work plan. If you do everything correctly at each stage, the result will not disappoint you.
First you need to prepare the wall base for future cladding with plastic. this work is especially important if you plan to attach PVC panels in a frameless manner.
Work algorithm.
- First you need to delete the old ones finishing coatings and any elements that may fall off the wall.
- It is also necessary to get rid of all floor defects. If there are noticeable potholes or cracks on their surface, then they should be repaired with a suitable solution.
- Areas that are too protruding need to be trimmed down.
- When the wall is leveled and all defects have been eliminated, it must be treated with a high-quality primer with antibacterial components. Such coatings are necessary to ensure that the base is protected from the formation of mold or mildew.
Only after all the work has been done to prepare the walls can you proceed to constructing the sheathing (if you are using frame method material installation).
Tools and accessories
For the installation of polyvinyl chloride panels, it is necessary to properly prepare and stock up on everything necessary tools and components.
You will need these tools:
- tape measure with a pencil or marker (indelible) to mark;
- a hacksaw with small teeth for cutting sheet panels;
- building level and plumb line so as not to encounter distortions and unevenness;
- triangle;
- plastic profile, slats for decorating the corners of the structure;
- self-tapping screws, dowel-nails, clamps for fixing different elements based;
- screwdriver and hammer drill;
- sealing compound;
- glue;
- antiseptic.
Also in the process you will need special accessories:
- external and internal corners;
- docking profiles;
- starting profiles;
- F-shaped profiles;
- ceiling and floor plinths.
All tools and accessories must be of high quality and reliable.
Calculation
It is recommended to proceed to finishing work only after all necessary calculations. This stage is needed to find out the exact number of PVC panels that you will need for wall cladding. Thanks to accurate calculations, you can avoid unnecessary overpayments due to the purchase of material with a large supply.
Fastening PVC sheets involves their horizontal or vertical arrangement. IN in this case the choice remains only with the owners.
- first you need to measure the entire room (that is, find out the length around the perimeter);
- then you should subtract the width of window and door openings;
- Now the remainder must be divided by the width of one PVC panel.
As a result of such simple calculations, you will get the number of panels needed to finish the room. It is recommended to add a couple of additional units to the resulting value. This is necessary so that you have a reserve in case some parts are damaged.
As for calculating the amount of material horizontally, it is carried out as follows:
- first you need to measure the area of the room;
- then the area of door and window openings should be subtracted from it;
- the resulting number must be divided by the area of one panel from the kit.
Add 10% to the final figure - this will be a reserve. It is worth considering that when laying horizontally, plastic panels will have to be cut, so you will have leftovers in the form of PVC scraps.
Installation methods
Installation of plastic panels cannot be called too complicated. According to experts, it is quite possible to cope with such work alone, since PVC sheets do not have much weight.
There are two main methods for installing such facing materials. The first of them is frame. When choosing this installation option, you must be prepared to manufacture a reliable and high-quality sheathing to which the plastic sheets will be attached. The second installation method is frameless. With this option, you do not have to make a separate frame, but you will need to carefully prepare the wall base for the future application of finishing materials. Otherwise PVC case the panels will not hold tightly and reliably on the floors.
It is worth considering in more detail how the installation of PVC sheets occurs in both cases.
On the frame
When you have completed your preparation rough floor, you can begin preparing a high-quality frame. It can be made of metal profiles or wood. Both options are quite reliable and durable. However, if you want to build a structure from wood, then it must be additionally treated with antiseptic agents to protect it from rotting and drying out.
The guide battens must be installed perpendicular to the PVC panels. Simply put, if you are going to attach the sheets horizontally, then the sheathing should be vertical and vice versa.
The frame strips should be mounted at a distance of 30 cm - given value is optimal in this case. These parts must be attached at the beginning and end of the wall, as well as around door and window openings.
Frame structure It is recommended to fasten under plastic panels to the bases with dowels. IN concrete floor insert 6x40 mm fasteners (this is necessary so that on the other side concrete base a piece did not fall off), and in brick - 6x60 mm. It is recommended to install fasteners keeping a distance of 50-60 cm.
The sheathing must be placed in one plane– this way the plastic covering will turn out smooth and neat. To achieve this effect, you can use small wooden pads or regular pieces of plywood and install them under the frame strips. Do not forget that these elements also need to be treated with antiseptics.
It is also permissible to use special perforated hangers, which are usually used for plasterboard ceiling structures. Such elements are necessary for placing metal profiles in one plane, but they can also be used in the case of wood frames.
If you plan to use it to build a frame plastic profiles, then you should take into account one important nuance: these elements should only be positioned perpendicular to the polyvinyl chloride panels. The slightest deviation can lead to many problems, for example, the clamps may not close and will not perform their main function. To avoid such errors, you should constantly check the verticals and horizontals.
Experts also advise installing wooden frame elements around the perimeter of the room. the same thickness as PVC profiles, since the starting panels will be attached to these bases.
Next, at the floor and ceiling level, a starting or ceiling plinth should be used. The starting element is a narrow plastic strip. Ceiling plinth is a shaped part with a special cutout.
Laying PVC profiles should start in one of the corners(at the top or bottom). The finishing should be fastened to the frame strips. Fasteners are selected depending on the material you used to construct the sheathing. The result is a structure that resembles a frame. It is into this that the PVC panels will be inserted.
Next, you need to trim the starting lamella in accordance with the length and height of the wall. To cut off excess pieces, you should use a hacksaw or a special metal saw. When cutting the panel, do not press too hard on it with your foot or hand - you will push it or break it. In order for the first part to fit correctly in the right place, you need to measure its length again. Subtract 4-5 cm from it and cut it off.
It is necessary to cut off the protruding spike at the starting strip. After this, the cut side of this part must be inserted into the corner profile, tucking the edges into the upper and lower profiles. It is worth tapping lightly with your palm to drive the bar as deep as possible.
Be sure to place a level against the edge of the installed element to check its levelness. If the part is positioned correctly, then you can safely fix it to each lathing strip.
When you install the launch panel, you should cut the second one, join it to the first one and secure it. Further actions are very simple and the same. Problems often arise only with the installation of the last lamella on the ceiling. Most often, this part has to be cut to width, after which you need to try to tuck it into both the groove and the profile (starting or corner) at the same time. This is not always possible to do carefully, since the plastic wrinkles easily. To avoid such a problem, you should not install a second corner profile. In this case, this part is put on a finishing panel adjusted to size. These assembled elements are then joined to the previous lamella. The profile is assigned only after these actions.
Further covering of the floors with PVC panels occurs in exactly the same way.
According to experienced finishers, the frame method of installing plastic panels is reliable, but more complex than frameless.
Frameless
In cases where the floors are smooth, plastered or covered with plasterboard, they do not require the installation of lathing for plastic finishing. In this case, it will only take away the free space in the room. PVC panels are attached to such bases using silicone, liquid nails or polyurethane foam.
However, in this case, the starting panels will still have to be fixed to the walls using dowels.
After this, the following is applied to the back half of the sheets:
- foam (it is better to lay it on PVC sheets in a zigzag pattern);
- silicone (it is recommended to apply it to the panels in small portions at intervals of 10-15 cm).
Then the bar is inserted into the profiles and pressed tightly. After this, it is fixed using fasteners. Further installation of plastic panels should continue according to the same principle.
The main advantage of this installation method is that it takes minimal free time. However, you can only use it if the walls in your home have a perfectly flat surface without serious flaws. It is worth considering that in the future it will hardly be possible to remove such finishing without damaging the plastic.
Wall cladding with plastic is not the best hard work. The main thing is to follow the instructions provided and use high-quality materials/tools.
If you decide to make these yourself Finishing work, you should consider some recommendations from experts.
- It is not recommended to combine PVC panels with more expensive materials. For example, a combination of luxurious marble and polyvinyl chloride will look ridiculous and disharmonious.
- According to experienced craftsmen, hot melt adhesive cannot be used for PVC.
- To carry out proper installation of panels around sockets, you should make all the necessary holes for them in the material in advance. Be sure to turn off the electricity before doing this.
- If you have constructed a wooden sheathing in the bathroom or kitchen, then you need to add a couple more millimeters to the resulting indentation, since wood is subject to deformation under the influence of dampness, moisture and temperature changes.
- PVC panels are a popular and in demand material, but they are not recommended for installation in the bedroom (both children's and adults). For such rooms it is better to choose more “breathable” materials.
- It is not recommended to cover walls with PVC panels immediately after purchase. They must rest in a dry and warm room for at least 2 hours.
- Wall finishing should begin only after the floor and ceiling are ready.
- The advantages of polyvinyl chloride panels include their ability to hide various communications. However, these elements must still be accessible to the owners. To do this, use removable inserts.
- If you use liquid nails to fasten PVC sheets, then you should not delay removing their sagging - these compounds dry out very quickly.
- Wall finishing materials should not have different openings at the junction points. This must be monitored when selecting plastic panels.
- At each stage of laying PVC panels, it is necessary to check the evenness of the structure using a level. This device will help avoid bevels and curvature of the finish.
- Experts recommend purchasing high-quality polyvinyl chloride panels. Do not look for too cheap coatings - such materials are already available. Ask the seller for quality certificates for the canvas. Study them carefully. Such finishing materials should not contain toxic compounds.
Design options
Polyvinyl chloride panels look organic in many settings. Designers do not recommend combining such coatings in one ensemble with very expensive and pompous coatings (for example, natural stone). Compared to such finishing materials, PVC sheets may seem too modest and even “poor”.
Plastic panels can enliven the interior of the hallway, corridor, living room, bathroom and kitchen. The main thing is to choose the coverings suitable color and textures.
On small kitchen loft style dining area can be distinguished by polyvinyl chloride panels, imitating dark red brickwork. Against such a background, a laconic white table will look harmonious and metal chairs with dark wooden backs and armrests. The dining nook will look complete if you hang a large dark clock above the table.
PVC panels can be used to decorate a kitchen backsplash. For example, in a room with burgundy walls, a white floor and the same white furniture, an apron trimmed with a wide plastic sheet with a picture of coffee beans will look impressive.
In the hallway, PVC panels are most often used. In such rooms, coatings that imitate brick and stone look especially attractive. As a rule, they are adjacent to regular wallpaper neutral colors. For example, canvases imitating light brown stone will look harmonious in tandem with yellow wallpaper and a wooden front door.
Also, PVC panels with a silk-screen printing effect look good in a hallway or corridor. Against the background of such light canvases, both the entrance and interior doors dark shades. Such coatings look attractive next to wooden furniture and decorative items.
With the help of polyvinyl chloride panels you can enliven the interior of the living room. In such environments, 3D coatings with relief surfaces look especially original and stylish. For example, with spectacular textured black canvases you can decorate accent wall with a TV, and place a dark chocolate woven sofa opposite it. To prevent the ensemble from seeming too dark and oppressive, light laminate should be placed on the floor.
Ceiling and wall cladding using PVC panels is becoming increasingly widespread and popular. This is a simple, affordable and aesthetic option. In most cases, when installing such panels, a frame and lathing are used, but in some situations this can be avoided. If the panels are installed without lathing, a special glue comes to the rescue, which will act as a fastener between the wall and the panel.
How to attach PVC panels to a wall without lathing
Attaching PVC panels to a surface without using lathing is a process with correctly completed work steps and a reasonable choice of glue.
In the process under consideration, glue plays a vital role, and therefore its characteristics and properties will determine the quality of the repair as a whole.
When is it possible to install it yourself without lathing?
Attaching PVC panels to a wall or ceiling without lathing is quite simple, and it is quite possible to handle such a task with your own hands. This option requires the use of a minimum of tools, knowledge and effort. Among the main requirements are criteria for the condition of the wall, which must be dry and even, as well as the choice of adhesive composition. It is not recommended to use this option for specific rooms with temperature differences and non-standard conditions operation.
When fastening without a frame is impossible
There are a number of cases when certain restrictions are imposed due to which it is simply impossible to attach plastic panels without a frame.
Among the main such cases are:
- the wall has significant defects or unevenness;
- the old coating is not removed or is partially removed;
- the wall surface does not dry out.
Of course this is not full list, since in each individual situation and room the conditions may be different.
How to attach plastic wall panels simply to a wall without a frame: options
In case Wall panels are attached directly to a bare wall, the only option for attaching them without additional accessories and damage to the wall, is gluing. The choice of glue, as well as the preparation of the surface, should be taken responsibly. Depending on the quality of the materials used, as well as the thoroughness of the preparatory work, the final result will depend. Additionally, the reliability and durability of the fastening may also vary depending on these aspects.
What acts as a wall mount
In the case when PVC panels are installed without lathing, a special glue acts as a fastening to the wall. Assortment of glue on modern market represented by a variety of brands and varieties. It is recommended to refer to the ratings of individual brands and their manufacturers, choosing only the best products.
Among all the options offered for sale, it is recommended to pay special attention to glue for gluing plastic.
When choosing a glue, you should pay attention to some features:
- After drying, it should acquire transparency and form a film layer;
- the glue must be resistant to moisture, frost and any temperature changes;
- must provide long-term and reliable fixation;
- should bond surfaces for a long period and harden quickly.
It is not recommended to use hot melt adhesive to attach the panels. When temperatures fluctuate, it can expand, up to the complete separation of the fragment from the wall surface. Liquid nails and polyurethane sealant are more effective.
What materials are used for mounting on a wall?
In the case where installation is carried out directly on a bare, pre-prepared wall, the workflow will require:
- plastic PVC panels;
- specially selected glue;
- building level;
- grinder for cutting plastic panels;
- devices for marking.
In addition, do not forget about the materials that will be used for preliminary leveling, coating and degreasing the surface.
How to attach PVC wall panels
Fastening wall PVC panels is carried out according to a certain algorithm. Mounting to a wall without battens is a simple process that anyone can do.
Before you begin installing the panels, you should first prepare the surface. To do this, the wall is initially leveled, cleaned and degreased.
The further order of work will be as follows:
- Taken separate panel and wipe with a damp cloth from the back.
- Next, glue is applied to the same surface in a dotted manner, with a gap of a couple of decimeters between individual drops.
- After these steps, the panel is applied to the wall.
- After applying the fragment to the wall, it is pressed for a few seconds.
If liquid nails acted as fastening to the wall, then after gluing it is recommended to tap the fragment evenly and tear it off. This is due to the fact that this type of glue requires five minutes of ventilation to acquire the necessary rigidity.
Is it possible to install PVC panels without lathing on the ceiling?
Before you start attaching plastic panels to the ceiling without lathing, you should first determine the distance between the panels and the ceiling. The mentioned interval depends on the type of lighting used or planned.
In the case when lighting is provided by built-in lamps, the gap should be at least ten to fifteen centimeters. This is necessary in order to completely and completely hide the wiring. It is recommended to outline the locations of the lamps in advance, cut holes for them and install the bases of the lighting fixtures.
In addition to the above preliminary steps, in the case of the ceiling, as well as with the walls, it is necessary to level it and clean it. In most cases, you can do without lathing, and the stages of work will coincide with the installation of panels on the walls. The only difference is that before attaching the fragments to the ceiling, you must immediately install them on three walls. ceiling skirting boards. During the work process, it is recommended to regularly use a building level.
If installation work are carried out in a bathroom or other room with high humidity, then the gaps formed in the wall decoration should be filled silicone sealant. This will ensure the waterproofness and durability of the ceiling finish.
The article examined the features and varieties of such a process as attaching PVC panels to a surface without sheathing. Overall, this is an unusual but common method of installation, which in many ways is not inferior to the process using frames.
Useful video
