Decorative fence for a summer residence: plastic, metal. Fences for flower beds and garden figures Decorative fence for a tree garden

Zoning of plots – required element landscaping of a dacha plot of land. For these purposes, you can make a fence with your own hands from a variety of materials. Borders can also include paths, a cascade of flower beds and hedges. It should be noted that experts advise dividing the land area into the following zones: residential (10%), house adjacent (15%), recreation (5%), gardening (70%).

The variety of flower bed options makes it easy to divide the area into functional zones

Traditionally, the main functions performed by various types of fences include:

securing boundaries;
protection from attacks by third parties;
restriction of direct penetration sun rays and winds;
ensuring privacy;
decorative.

For a fence, you can use any available material.

For the construction of boundary fences, almost any factory or improvised materials are used.

Wood and its processing

Wood is an easily processed material available in our country. When properly processed, the natural structure serves as an independent element. Painted in . But at the same time, wooden fencing is susceptible to natural phenomena, so it doesn't last long.

Wood wins among materials for its ease of processing, naturalness and moderate low cost.

The structure requires annual maintenance (painting, preventing the penetration of insects). Under shock loads, the material quickly becomes unusable.

Presented the following options Applications:

Garden picket fence, that is, processed, installed in parallel wooden planks. can be solid or made in the form of a lattice. Can be used for a vegetable garden or recreation area.
Plank fence. It is distinguished from a picket fence by a continuous method of fastening and the use of both edged and unprocessed boards of approximately the same width.
Palisade One of the most ancient types of fencing. It consists of wooden stakes tightly adjacent to each other, driven into the ground. Security function increase by sharpening the upper part of the structural elements.
Ranch fence. It is represented by fastening timber (boards) in a horizontal plane with large openings between them. It can be made from processed blanks, but this requirement is not necessary.
Wattle fence. Economical antique fencing that does not require financial costs. It is made by driving stakes into the ground and intertwining them with young shoots of trees and shrubs. or vines can become the highlight of the outdoor decor of the site.

Wood coating protective compounds allows you to preserve the structure of this raw material for many years

To avoid premature aging of wood and its corrosion, be sure to carry out treatment special compounds or paint the finished structure.

Metal and its derivatives

Metal products are in second place in demand in the manufacture of various fences.

Metal fencing greatly benefits from its practicality and long service life.

They are used to produce beautiful designs, very different in price and aesthetic perception, such as:

(corrugated sheeting) – easy to install metal product, with a service life of at least 50 years. Produced in a variety of colors. However, its appearance is simple, and the product is subject to deformation.
. It does not limit the penetration of sunlight into the selected area, but also does not protect from the wind. It is made from metal in several designs: chain-link, corrugated, . The chain-link is distinguished from the corrugated weaving method; the second creates a more static plane, for fixing which the distance between the supports can be 5 meters, while with the first - no more than 3 m. The positive characteristics are complemented by the possibility of using a mesh fence as a base for growth climbing plants.
Welded multi-element structure. A huge number of metal decorative elements can be purchased at construction stores. At home, they are complemented by products made from metal picket fences or poles. The process is labor-intensive, requiring preliminary calculations, and when performed, welding skills. Made for the garden with your own hands, it will bring great aesthetic satisfaction.
Forged products are the elite in the world of fences. They are divided into utilitarian, cold forged, decorative (in most cases they are made to order) and combined. A small one will emphasize the good taste of the owner.

Forged products emphasize the sophistication of style

Stone and plastic

No less common are fences made from the following materials:

neatly executed low brickwork serves as an excellent fencing, and its types (clinker, red, silicate) allow it to fit into any design solution for the design of a courtyard;
natural stone is one of the most durable materials, not subject to the effects of water and sun, but its uneven contours present some inconvenience when constructing a fence made of stones, and are also unsafe for small children;
metal mesh with natural or natural filler as a border looks impressive - they are voluminous and impressive, installation is simple, but requires time for stone filling;
the use of eight- or five-wave slate simplifies the task of installing a level fence several times, while installation takes little time, but the material is fragile and dangerous.

Due to their light weight, such fences can be moved to a place of your choice without much difficulty.

The cheapest in cost, but not of aesthetic value, is a series of fences that use improvised means and materials (tires, etc.). Design options are limited only by the imagination of the owner of the farmstead, and the use of broken equipment as separate flower beds, for example a broken wheelbarrow, will make the interior exclusive.

Using tires as a fence for a flower garden allows you to save a lot of money

Do it yourself

Before implementing your plan, you should decide whether the fence will be permanent, or over time it will have to be moved due to a change in the layout of the site.

Scheme for self-creation flower beds

If the final decision has not been made, then it seems reasonable to assemble decorative fences with your own hands.

For flower beds

One of the options for a quickly erected and no less quickly dismantled low fence is represented by a mini picket fence for flowers. You need planks that are 20–30 cm larger than the height of the fence wall (for immersion in the ground), as well as crossbars. The structure is assembled in sections, which can represent the whole side of the fence or part of it.

Options for future fence sketches

The work is carried out in the following order:

On a flat piece of land, crossbars are placed at a distance equal to 1/4 of the height of the fence on each side. Fix the position with the outermost boards of the fence. As stated earlier, they must be longer than the others in order to sink into the ground.
At equal distances, fixed by preliminary markings, the section is filled with planks. Pay attention Special attention to the same height of each structural element. Fastening is done with nails or self-tapping screws of the required size.
Install the section level in a strictly vertical position. Alternating blows of the mallet on the support boards, the structure is gradually immersed in the ground. To avoid premature rotting of the formed canvas, it is recommended to leave a few centimeters before direct contact with the ground.

Drawing for installing a fence at the dacha

Intermediate long specimens of a picket fence are securely fixed in the ground

In order for the support posts to last a long time, the parts immersed in the ground are treated with antiseptic materials, fuel oil or bitumen.

For the front garden

Complete harmony of the entire area

A common option that combines reliable design and reasonable price is represented by a solid fence made of metal mesh. To make it you will need locksmith tool, welding machine and the ability to use them.

Calculate required amount material, taking into account the following:

the length of the post consists of a ground part equal to the width of the grid, a distance from the ground (5–10 cm), and a part installed in the ground to a depth of 35–45 cm, having square section 30x30x1.8 mm;
the pillars are installed at intervals of 1.5–2 m, and the required number is obtained by dividing the perimeter of the fenced area by the distance between the pillars;
a mesh 1 m wide is purchased in quantities equal to the length of the perimeter, while the factory packaging includes 10 m;
the total length of the corner is equal to two perimeters of the enclosed area, the shelves are 30x30x1.8 mm;
rod for attaching a mesh with a diameter of 8–10 mm.

Option for designing a flower bed made of mesh

Step-by-step instructions for construction and installation are as follows:

Using measuring instruments, posts and a cord, mark the area and determine the installation location.
In marked places, dig holes to a depth of 35–45 cm to the diameter of a drill or shovel.
Disband square pipe to the required measuring areas. To avoid corrosion when in contact with the ground, their lower part should be coated with bitumen.
Install the pipe in the pit strictly in a vertical position. Temporary fixation is performed. Fill the hole with concrete solution mixed in a ratio of 1:2:3, where the first is cement, the second is sand, and the third is filler (crushed stone or other).
After the concrete that secures the pillars has dried, a corner is welded along the upper edge of the pillars and a counter one at the bottom, with a small distance from the ground (5–10 cm).
The structure is primed and painted in the preferred color.
Prepare the mesh for installation. For these purposes, the roll is unwound on a flat area and the loose side joints of the mesh are put in order. She is reeled in again.
Then the mesh is attached between the corner shelves using a rod, welded at small intervals in pieces of 10 cm.

Stage of arrangement of holes for pillars

To care for the front garden, a fence a little more than a meter high must be supplemented with a gate. It is made in the same way as the main fence.

Decorative fence

Do-it-yourself decorative children's fences are assembled from a material from which the likelihood of injury is minimal. As a rule, to make a decorative fence in kindergarten, use prefabricated structures on a polymer base or with.

The use of plastic fencing significantly increases safety

Such decorative fences are characterized by high level environmental safety, exceptional strength, resistance to moisture, temperature fluctuations, low maintenance requirements and simple installation.

For self-installation For a sectional garden, fasteners and decorative elements are purchased. The required quantity is calculated taking into account production standards. The most common sections are those with a height of 71 cm and a width of 122 or 130 cm by 244 cm.

One of the options for installing a plastic fence

Their undoubted advantages include sufficient dimensions and the inability to injure a child. They have two installation options, where the first is represented by a T-shaped ground support, installed on any site without rigid fastening, the second - with the supports immersed in the ground.

One of the options for a plastic fence for a flower garden

It should be noted that different manufacturers vary the dimensions and installation method at their discretion. So, in some cases it is necessary to carry out concreting support pillars with a diameter of 89 mm, on which the guides should be mounted, and only then the structural elements should be inserted into the grooves. The options can be seen in the photos posted on the manufacturers' websites.

Probably, each of us cannot remain indifferent to the living and vibrant beauty flower beds. Nevertheless, the decorative fences and fences that frame them also attract attention and remain in the memory. Moreover, the latter, talentedly decorated, sometimes deserve more attention than the flowers themselves.

Of course, the main purpose decorative hedges and the fence is precisely a decoration that is in harmony with other elements of the landscape. At the same time, fences turn the flowerbed into a complete composition, divide the space, and also protect the flowers from the excessive attention of children and animals.

The fence is small, but remote: it both decorates and protects

What types of fences are there for flower beds?

Fences come in different types, and the choice depends on the specific purpose that the flower fence will serve:

If you just need to separate the flower garden from the lawn, then a mini-fence up to 7cm in size will do.
In the case where the flowerbed fencing is also a border for the garden path, make the height of the fence 10cm.
If you need to block the roots of flowers or plants, pay attention not to the height of the fence, but to the level of its immersion in the ground. It must provide sufficient strength, for example, brickwork or plastic tape.
When it is necessary to protect flowers from cats, dogs, and overly curious children, make a fence at least 0.4 m high. Of course, the flowerbed will look unaesthetic if it is covered with a solid fence. Use a wooden, plastic or metal picket fence that will make your fence translucent.
Products up to 50cm in height are suitable for a rose garden, because they will not be conspicuous against the background of tall and lush flowers.
For a mixed border of low flowers and plants, flat pebbles, paving stones or a border for paths laid out along the perimeter of the flower garden are sufficient.

Traditional wooden fencing

Wooden fence on metal frame- combination of simplicity and reliability

Wood is one of the most commonly used materials when constructing a hedge for a flower bed. It does not heat up from the sun, is completely safe for plants, economical, convenient and pliable for skillful construction hands. It is not difficult to install a simple wooden fence for a flower bed yourself from twigs, slats, logs, planks, and slabs.

A significant drawback is its fragility, susceptibility to the destructive effects of water, sun and wind, which can be solved to a certain extent by various impregnations and regular painting.

What types of wooden fences are there:

a border made of logs, that is, stakes buried in the ground;
picket fence: it can be simple, from identical ordinary strips; and complex - made of planks of various sizes and qualities;
mosaic from wood cuts or cross sections of logs.

Making a fence from wooden pegs

Limiting a flower bed with logs of wood is one of the most common and simple types of fencing a flower garden in the private sector, in a country house or in a personal plot. You will need logs of the same diameter. Choose the height according to your wishes, but keep in mind that 20cm should be driven deep into the ground. Qualitatively installed fencing made from logs carefully treated with antiseptic will last up to 10 years.

It is important to treat a log fence well to prevent rotting.

prepare logs of the required length;
clean them of bark and treat them with an antiseptic, otherwise the logs may quickly rot;
dig a ditch twenty centimeters deep around the perimeter;
install the chocks evenly and tightly;
compact the soil well and cover with soil.

Making a fence from boards

A board fence for a garden turns out to be beautiful and “translucent” because the boards are mounted at a certain distance from each other. It is more difficult to make than the previous type. Step-by-step recommendations:

prepare timber, boards, wood screws or regular nails, a screwdriver or hammer;
drive support beams into the ground vertically and at the same height level in increments of 0.7 m;
fasten the boards horizontally to the top of the beam, the end part of the board should not protrude beyond the beam;
the next board is installed 10 centimeters lower from the edge of the board installed earlier;
This system of fastening boards is carried out for each section.

In addition to the fence itself, it is important to make a gate into the garden

Decorative homemade “lattice”

It is good to fence tall plants and flowers in the garden with a light and translucent “lattice” fence, which is easy to make with your own hands. A “lattice” of large wide slats will help you decorate and thematically divide zones on your garden plot, for example, separate a recreation area or a storage area for equipment from the general area of the site.

Take two beams each as supports for one section and slats for the crossbars, wood screws 3x30mm and 3.5x45mm. You'll need a screwdriver; a hammer won't help.
Drive in the supports.
Stepping back 30 millimeters from the top edge of the support beam, attach the logs. Use screws measuring 3.5x45mm.
Attach the lower transverse board at a distance of 0.5 m from the upper joist.
Fasten the first slats from left to right. Use screws measuring 3x30mm. The first plank is installed at the attachment point of the upper log and to the lower frame 10 cm from the support beam. The following slats are attached with a gap of 10cm.
Then all subsequent slats are fixed. As a result, you will get a beautiful patterned fence.

Decorative fence made of slats

Basket made of wicker

This type of fencing is not very durable, but it looks original. The basket “weaves” along the perimeter of the round flower bed. The wattle fence pleases the eye and protects plants and flowers. You can make a decorative “basket” with your own hands from branches or twigs of vines, hazel, birch branches, and grapevines. Branches for fencing must first be cleared of bark. The smaller the diameter of the structure, the greater the height of the fence.

Fencing for flowers made of vines

Country decorative fence made of branches

A wicker fence will decorate your flower garden and help decorate personal plot in country style. Wattle is also made from twigs or vines, wires, multi-colored hoses and anything that looks like twigs - use your imagination and get an original decoration!

Wood-polymer composite is popular, which lasts a long time and does not react to precipitation. The stakes can be pieces of reinforcement or plastic tubes. Sequence of making braids:

Start with the supports. Install them at a distance of 50 centimeters from each other.
Start weaving from the bottom. Attach the vine to the first support with wire or screws, then let it go around each support post.
Secure the junctions of the rods with wire. The weaving system is uniform throughout the entire diameter of the basket.
After finishing the weaving process, you can treat the twigs with an antiseptic to prevent rotting. Do you want to make your basket even more aesthetically pleasing? Coat the product with varnish.

Decorative fence made of branches

Metal fencing

Decorative cast iron and iron fences are popular among owners of villas, large private plots, lovers of elite and expensive style in the private sector. Forged fences look expensive; they are made by special companies individual orders. Such fences are durable and look very beautiful. You need to choose them very carefully, coordinating the design with the overall landscape. The only negative is that such products are quite expensive.

A plastic fence looks like a forged metal fence

Plastic fencing

Plastic is quite popular in the manufacture of fences for flower beds and flower beds. Advantages of plastic products:

variety of shapes, colors and sizes;
ease of manufacture and installation;
durability - plastic resists precipitation, moisture, ultraviolet rays;
the ability to easily select a product that matches the overall landscape design.

Types of plastic fencing

Plastic fence for flower beds - fast, cheap and beautiful

Decorative plastic fence comes in different types. Sectional fences can be the most different forms and colors, they already have stakes for mounting. Just drive pegs into the ground and your low fence is ready. Plastic borders can take any shape, which will allow you to make a flowerbed of the desired shape. They can be smooth or have a surface structure with a pattern; imitation of stone or brick is possible. The simplest option is a roll plastic tape.

The fence is hand-cut from a piece of plastic

Tips for installing plastic products:

You can lay out the purchased plastic product under the sun. Warm plastic will be more pliable and easier to install and will take the desired shape.
Dig a hole in the ground.
Measure the ribbon to the desired length. Use a staple gun to join the pieces of tape together.
Place the plastic in the groove and tamp down.

The hedge of bushes and lilies of the valley is truly alive

Hedge

Durable and beautiful fence decorative allows you to visually highlight an area and focus attention on a specific area landscape design. Depending on the purpose and type, such a fence can be functional, zoning, or protecting flower beds from trampling.

Types of decorative fencing

A decorative garden fence can perform various functions:

prevent unauthorized persons from entering the site, protect the territory from wind, street dust and noise;
delimit adjacent areas without blocking sunlight;
zone the garden and local area;
protect flower beds from trampling and domestic animals, prevent their growth.

There are many options for decorative fences for a suburban area, they all differ not only in purpose, but also in appearance. Therefore, it is customary to classify fences according to the materials used for their installation:

stone fences;
brick fences;
wooden and hedges;
plastic fences;
metal fences.

When choosing the material and type of decorative fence, you need to take into account the characteristics of the soil, the type of planting and climatic conditions.

Stone fence

Stone fences They are able to decorate any area; they look solid and reliable, emphasizing the surrounding landscape design. Stone fencing has the following features:

suitable for any site, flower garden, garden paths;
can be used for landscape design in oriental style, for building retaining walls, alpine slides;
a permanent fence, resistant to external negative influences, climatic phenomena, including frost and precipitation;
for production you can use stone of various types, shapes and colors;
goes well with other materials.

For installation, you can use natural stone of various types - colored large pebbles, torn or cut stone, polished blocks.

Brick fence

Decorative brick fencing is also very popular for garden areas. This is a stylish and very attractive material with excellent performance characteristics. It is durable, can withstand frost and precipitation, and does not require special care.

To install fences, you can use ordinary ceramic or silicate bricks, clinker, or hyper-pressed blocks. In addition to the standard brown-red or white shades, colored bricks can be used for decorative fences - yellow, green, black.

Eurofences

Concrete Eurofences have a stylish and attractive appearance; they can imitate natural wood or stone, during the manufacture of the section, colored pigments can be added to the solution. Structurally, these are monolithic slabs that are fastened using special posts with grooves. Sections can be solid or have beautiful openwork inserts; it is possible to install lighting systems on the posts.

To install a Eurofence, a strip foundation is required; the supports are concreted to ensure greater reliability of the structure. During installation, sections of the fence are neatly inserted into the grooves, that is, there is no need to use metal embedded parts or perform a number of other complex work.

Wooden fences

A decorative wooden fence can be easily assembled with your own hands; this is the simplest and, at the same time, attractive option for any suburban area. For installation you can use various options wooden fencing:

a low herringbone fence made of boards or slats;
an ordinary board fence made of solid sections;
a fence in the form of a plank palisade;
wicker willow fences and “living” walls of various heights.

One of the simplest is a lumber fence or a simple picket fence. The second option is divided into through and non-through picket fences, in the form of one row of planks or two rows, while the boards are placed in a checkerboard pattern, protecting the area from being viewed. For small flower beds, you can use low wicker fences; for planting standard roses, lattice fences are optimal.

Metal fences

One of the popular options for a suburban area are metal fences in the form of forged sections, trellises or nets for climbing plants. Metal fences have the following advantages:

high level of strength and reliability;
resistance to external negative influences, mechanical loads;
the possibility of installing fences around the perimeter of the site or for zoning the garden;
combination with other elements of landscape design;
the ability to use other decorative materials - wooden and stained glass inserts, climbing plants.

Metal fences are very beautiful and have a certain style, but they require protection against corrosion, for which special paint and varnish coatings are used.

Plastic fencing

Decorative plastic picket fences are well suited for any garden; these include not only classic-type fences, but also such original options as borders made of plastic colored bottles, ribbons or cords, and small pots for plants. Among the advantages of using this option are:

decorative, more attractive appearance;
low price;
easy DIY installation;
practicality and unpretentious care;
versatility.

To fence the area, you can use a classic picket fence of medium height, imitating natural board. The most commonly used designs white, but if necessary, you can order colored fences - brown, green, yellow and others.

For flower beds and flower beds, you can use low fences that will not obscure the plantings, but will still ensure the safety of the plants. For this purpose, strip fences and plastic logs, which are dug shallowly into the ground, are suitable. You can also use ordinary plastic bottles as a decorative fence, digging them into the ground with their necks. To give this design more strength and attractiveness, the bottles can be filled with small colored pebbles or glass beads.

A very attractive option would be to use plastic flower pots planted along the perimeter of garden paths. For such structures, low-growing flowering plants are used; they must be kept warm for the winter.

Stained glass fence

Stained glass fencing is an original and very attractive option that can be used for installation around the perimeter or for zoning a site, garden or local area. Structurally, it is a regular metal or forged fence with inserts made of colored glass or acrylic. In addition, inserts can be made from translucent resins, giving the structure an incredibly attractive and fabulous appearance.

The cost of a stained glass fence is quite high, so it is usually combined with ordinary metal lattice or forged sections. Stained glass inserts in this case give an original appearance; when passing through them, the sun's eyes acquire bright, unusual shades.

Combined designs

Combined fences are made as a combination of different materials. Most often this is a combination brick pillars and wooden lattice, but you can also use forged elements, a natural stone various types and shades, elements of “living” walls made of climbing plants. This type of fencing is used to delimit adjacent areas or for zoning the local area. The height of the fence is usually medium or small.

Living decor

A living fence made of trees will become a real decoration for any site. Depending on the landscape design and purpose of the area, the following types of fences can be used:

high (from two meters);
medium height (0.5-2 meters, can be combined);
low borders (up to 50 cm (special shrubs are used).

When choosing a “living” hedge, you should take into account the conditions and requirements for caring for plants, watering them, and fertilizing them. Some plantings require regular crown molding to maintain an attractive appearance and prevent overgrowth.

The following types of hedges can be used for landscape design:

deciduous and evergreen plants (shrubs and trees of various heights, the choice depends on the climate and planting conditions);
thornless and thorny hedges (mostly shrubs).

For high hedges, large-leaved and small-leaved trees with wide-conical crowns are used. The planting height can reach 20 meters, the crowns are very dense and shade-tolerant, but careful care and pruning are necessary to ensure that the hedge retains its attractive appearance. Such bosquets, that is, living walls, are used for large areas, fences of cottage villages, the planting height is most often at a level of 3 meters.

Among the most commonly used trees for high hedges are linden, common hornbeam (distinguished by a very dense crown), field maple, rough elm, black and white mulberry. For high thorny hedges, different species of hawthorn (soft, common, Altai) and honey locust are used.

A decorative fence with your own hands will help decorate your garden plot and give your flower beds and flower beds a finished look. original look. Fences for flower beds can not only transform the landscape of the garden, but also perform other useful functions:

Depending on the purpose of the fence, the type of plants, as well as general design garden, select the height and design of the fence:

The range of ready-made garden fencing is very large. However, if you show a little imagination, a decorative fence made by yourself can please you even more than the most beautiful ones modern products. There are practically no restrictions on the options for making fences for flower beds. Let's consider the simplest options from traditional and not so traditional materials.

Wood is a classic option, the most affordable and in demand. Plus it's one hundred percent environmentally friendly material, which will not harm plants and the earth. On the contrary, slowly decomposing wood will nourish the soil and plants.

Decorative fence for a flower bed made of sawn logs

To decorate flower beds and flower beds, you can use boards, timber, small stumps, stakes, twigs, bars, saw cuts, etc.

Types of wooden fences

Important! The wood must be treated with an antiseptic, especially the parts in contact with the ground, so the decorative fence will last longer.

Wicker fences

Wicker flower beds and fences for the garden fit organically into the rustic style, and the plants in such flower beds look especially cute. The work itself will bring a lot of pleasure.
To work you will need any flexible branches:

hazel;
willows;
grape vines;
raspberries;
cherries.

An example of a wicker fence for a summer house

It is best to prepare material for wicker flower beds in early spring, at this time the rods have good flexibility and are better cleared of bark. If the branches are not flexible enough, they are soaked in hot water.

Wicker fence installation

Tip: when weaving, you can take branches one at a time or several at a time. Very thin branches are often woven into bunches to create a beautiful checkerboard pattern.

Wicker fences for flowers can be made in the form of a border, a fairly high fence, or in the shape of a basket. You can make a raised flower bed out of wattle fence. To do this, the sides of the flowerbed need to be protected plastic film, lay drainage in the form of crushed stone and sand at the bottom and fill with soil.

Brick fence

Brick as borders for flower beds in the garden is one of the popular options. can be very different. There are many advantages to such a fence:

Attractiveness. Unless, of course, it’s not an old crumbling brick, but, for example, a solid colored version;
A brick border looks organic with brick walls houses and plants;
Strength. The brick curb is durable even without the use of cement;
A brick dug into the ground protects flower beds well from weeds.

DIY brick flowerbed border

Decorative fences made of natural stone

– this is beauty, harmony and durability. You can create beautiful flower beds and flower beds from natural materials. Mineral for garden fence You can use any: pebbles, granite, sandstone, dolomite, marble. You can make the following types of decorative fencing with your own hands from stone:

Pergons and gabions

Natural stone in a welded mesh allows you to create flower beds and fences for a garden of any height. Multi-tiered or tall ones look great in combination with the natural landscape.

Installing such a fence is also not difficult. You need to assemble a box from welded mesh and fill it with any stone, the main thing is that the size of the backfill matches the grid cells.

Can be used on any basis. Rack rods with a diameter of about 8 mm are used as the base.

The grating can be made from galvanized steel rods with a cross-section of 5 mm. In addition to stone, other materials may be present in the structure: tree cuts, glass, brick, concrete. After installing the flowerbed, its walls are lined with geotextiles, and soil is poured into which flowers can be planted.

Plot near country house or cottage should look not only interesting and attractive, but also individual. Of course, you can use the services of a designer and order a project, but it will still be a set of certain template modules. And individually made elements will be quite expensive. The most economical option is to try to do everything yourself. If the area is small, you don’t have to spend money on a massive fence for fencing. Use decorative. It will only outline the boundaries of your site and will not hide it from prying eyes.

Functions and uses of a decorative fence

An abundance of flowers, well-groomed lawns, smooth paths, decorative pond- it seems that everything is already there. But over time, you always want to change something, add something. In this case, with the help of decorative fences, the area can be divided into several zones. Indeed, in city apartments, each room is decorated in its own way, for each family member. The same principle can be used for garden plot. Zoning can be done using various types of decorative fences. Bright and colorful picket fences will separate the children's area, wattle fences will outline the area in rustic style, strict, made of log components - indicate a male territory or a guest area.

Gallery of fences with different purposes

A fence made of willow twigs will decorate any area Multicolored A pencil fence will decorate the children's area A fence separates the recreation area

A decorative fence will first of all give a finished look to the flower bed and emphasize the beauty of the flowers. In addition to the aesthetic function, it also has a number of practical ones:

Flowers will grow only within the boundaries specified for them and will not grow throughout the entire area.
The fence will protect the plants from strong winds and accidental damage - the flowers will not be trampled and there will be no broken branches.
Caring for flowers will be greatly simplified and the problem of accidentally mowed plants will disappear.
If there are quite a lot of different types of flowers on the site, then thanks to the installed fences and mini-fences, the problem of searching “where which flower was sitting” in early spring will disappear. It is enough to look at the photographs taken last summer, and everything becomes clear. This is especially true for perennials that bloom by mid-summer.
Thanks to zoning, it will be possible to plant flowers separately that require a certain type of soil and a certain degree of moisture.
For each type of flower, you can choose a fence of a certain height.

Types of fences

Today you can purchase fences of a wide variety of types and sizes, made of plastic, wood, and metal. But I wouldn’t want to see the same one at my neighbor’s. There should be individuality in everything. Therefore, it is more interesting and easier to design and make a fence yourself, using improvised means. It doesn’t have to be large - sometimes one or two spans are enough to give a plot or flowerbed a certain charm.

Gallery of products made from scrap materials

A woven corina fence and at the same time a flower bed for different types of plants High fence plastic bottles Fence-flower bed from car tires Traditional Ukrainian wattle fence On one site you can combine different types fences

To make a fence, you can use a variety of materials: wire, stone, plastic or glass bottles, PVC pipe, old tires, reeds. Also suitable various elements made of wood: branches of vine, hazel, willow twig, picket fence, wood cuts, wooden chocks, etc. Almost everything that is on the farm.

You can increasingly see wicker fences. These are traditional wattle fences that can be easily made from pre-cut and prepared willow twigs, vine branches, hazel, raspberry, cherry branches, and reeds. Easy to make, they go well with almost any plant. With certain skills, you can build a basket fence for a flower bed. Weaving can be horizontal or vertical. For beginners, it is better to start with vertical weaving to understand how it works. If the wattle fence is made in the spring from unprocessed willow branches, it will turn out to be a hedge, since the willow takes root well and quickly.

Types of fences made of different materials in the photo

Slab fence Simple fence for zoning Wattle goes well with hedges You can decorate a flowerbed with such a fence
Original fence from glass bottles Hedge from willow Vertical wattle can be very dense Original fence made of willow twigs Stone fence for decorating a flower bed with low-growing flowers Gabion - a fence made of mesh filled with stone

Preparing for construction: determining the type, location, size

Before you begin construction, carefully plan where the fence will be installed. Make a preliminary sketch according to which you will work. Take the time to draw in detail what types of plants will be planted and the color of the future fence. It is better if there are several sketches linked to existing buildings. So you can choose more interesting option. For example, if the main fence around the site is made of stone, it is good to combine it with various types wooden fences- wattle fence, picket fence, wooden posts.

The fence is installed before the plants are planted, so in the sketch take into account the approximate height of the flowers - the data is indicated on the seed packages. It is important to pay attention to the direction of the world. If you plan to plant shade-loving plants, the fence should be installed so as to create maximum shade during the day and be high enough. For sun-loving plants, the fence should be of a minimum height and not shade the plants.

A decorative fence can be installed by going deep into the ground if you plan to plant plants that reproduce by root shoots, and by raising it a short distance above the ground if the plants are tall or curling. As a rule, the fence has a height of 40 cm and above.

Since the fence is a decorative element, it means that we are not making it for “the rest of our lives.” It should serve us for at least 5–7 years, and then we will still want to change something, because new design ideas or new flowers will appear. You need to choose the material with which you will be comfortable working. Let's look at the most common ones.

Wood is the most environmentally friendly and available material. Fairly easy to use. With proper preparatory treatment it can last up to 10 years.

Plastic and glass bottles are the easiest materials to work with. The downside is that plastic is not an environmentally friendly material and can release toxins into the soil. Glass bottles are easy to break and can cause injury in the future.

Options for building materials in the photo

Original fence made of thin PVC pipes Colored plastic bottles make a fun fence Glass bottles not only for storing alcohol The easiest picket fence to use Fence-fortress made of tires

Car tires will last a long time, but like plastic, they emit toxins. They look pretty rough.

PVC pipe will last a long time. If you have a special soldering iron, you can simply make an original fence from it.

Calculations

If the fence is installed along the entire perimeter of the site, you must first determine its corner points, drive pegs into them and pull the cord. Once you have established the exact perimeter of the fence, you can move on to planning the spans. To do this, you need to divide the length of the fence by the span. As a rule, for high decorative fences this is 1–1.5 m. Low fences can be made with smaller spans, this will make them more stable.

For example, our plot has dimensions of 4x5.5 m. We plan to make a span of 1 m. The 2 widths of the plot will consist of 8 spans. When dividing the length, 5.5 m does not give a whole number. In this case, you need to increase the length of each span by 10 cm. We get 10 spans of 1.1 m each. The increase is insignificant, but we will avoid two fragments of 0.5 m each, which will disrupt the completed appearance of the fence.

If the fence will be installed in a small fragment (for example, one span of fence), draw its exact dimensions and think over the installation method. It should have a stronger mount, since there is no connection to other parts. It will be secured only by the main pegs and will be more susceptible to the influence of strong wind and rain.

Having calculated the required number of spans, you can begin to calculate the material. Draw a span on paper, count the required number of pickets (posts, branches, planks, etc.), and then multiply by the number of spans. This way you can quite accurately calculate the required amount of material.

Making your own wattle fence

Materials and tools required for work:

Posts for side supports - 2 pcs. for each span
Cross bars - 3 pcs. for each span
Rods for weaving - blanks of the same height
Garden secateurs
Axe
Nails
Building level
Shovel
Hand protection gloves

Wattle is the easiest type of fence to make. It can be made from either thin branches or thicker poles.

Using a shovel and a building level, we install the side pegs. We deepen them to a third of the height. It is better to first treat the part that will be in the ground with resin or seal it with fire so that it does not rot so quickly.

Using a screwdriver and self-tapping screws or a hammer and nails at equal distances, we attach the crossbars to the posts.

We prepare branches of the same length. We use for this sharp knife or pruning shears. To do this, use a template - a thicker branch of the required length. The wattle fence is usually not made higher than 1.7 m.

We start weaving from the side that will be less visible. The branches go around the crossbars alternating: if the first one is braided from the outside, then the next one is braided from the inside. We press the branches tightly against each other.

We continue weaving until it is completely filled with twigs. At the end of the weaving, use pruning shears to trim the sharp corners of the rods, if any.

Sectional small fence made of wooden pickets

Even a woman can make such a fence from the simplest pieces left over from construction work. The work is quite simple and easy, and you will be pleased with the result.

Materials and tools needed for work

Cross bars - 2 pcs. for each span

Side posts - 2 pcs. for each span

Pattern for maintaining the distance between the pickets - 1 pc.

Pattern for maintaining the distance between the slats - 1 pc.

Pickets, pre-treated sandpaper- 9 pieces per span

Screwdriver

Self-tapping screws

Sandpaper

The peculiarity of installing such a fence is that if the side posts are made with pointed lower ends, it will be easy to install by pressing it into the ground. You don't need to use a shovel. The corners are easy to connect with self-tapping screws or nails.

We lay it on the ground cross bars. Between them we place a special pattern (a piece of picket fence), which will determine the distance between the crossbars.

We attach the first plank to the beginning of each of the crossbars using a screwdriver and self-tapping screws. We lay an additional pattern and the next plank close to it. We also secure it with self-tapping screws. We attach side posts along the edges.

When the first section of the fence is ready, we begin assembling the next one in a similar way.

We prepare several sections in this way, paint or varnish them. Our fence is ready for installation.

If the fence was made of wood - pickets, chocks, saw cuts - pre-treatment with an antiseptic is required. This will protect against damage by fungus and various pest beetles. After this, if necessary, you can treat it with stain and varnish if you need a natural, beautiful color. If the design involves some interesting colors, then you can paint it in the most various colors using exterior paints. They withstand temperature changes well and protect the wood from moisture, which means the fence will last quite a long time.

If the fence was woven from willow, cherry, or hazel branches, it is best to coat the prepared rods with varnish or paint before weaving. This ensures both protection of the material and complete staining of the fence.

Almost any decorative fence can be easily made at home. As you can see, it does not take much time and does not require certain skills. Makes your imagination work and transform your cozy area to the storehouse of ideas. Having made one small fence according to your own sketch, you can gradually learn how to make more complex and interesting designs. The main thing is to start.