Housewives often face the problem of how to wash an acrylic bathtub at home? The walls and bottom are sensitive to abrasive substances, so a product chosen at random will not work. The purpose of the article is to tell about the basic rules and methods of cleaning, to give practical advice and recommendations:
- characteristics of cleaning products, their features;
- cleaning options - what they are, the main differences;
- Tips for caring for and extending the service life of your bathtub.
What should you know about the characteristics of acrylic bathtubs before cleaning them?
Before answering the question of how and what to wash an acrylic bathtub, let’s talk about the material used. Acrylic has a dirt-repellent effect: microorganisms, bacteria and fungi do not develop in the bathtub. The material is durable and resistant to impacts. A noticeable disadvantage is that it is easily scratched and subject to wear.
The main difference is exposure to abrasive and chemically active components. Like plastic, substances with high alkalinity or acidity lead to degradation of the structure, and abrasives scratch the surface, leaving deep grooves.
It is important to be careful when washing. Do not buy abrasive compounds, pastes with ammonia, chlorine, acids and alkalis. Powdered products are harmful, leaving damage and scratches. Brushes (metal and with hard bristles) are contraindicated for use.
What brushes and sponges to use
For cleaning, use soft cloths or sponges. Cloth napkins are also used. They are moistened in special solutions (we will talk about them later). After washing, it is wiped dry and treated with polish.
If you can’t buy a special sponge, use soft-pile rags, for example, microfiber. If necessary, use a regular cloth - the main thing is that there are no abrasives on the surface.
How to clean an acrylic bathtub at home: TOP 5 ways
We have selected several options for you on how to clean an acrylic bathtub at home:
- detergent;
- lemon acid solution;
- vinegar;
- soda;
- toothpaste.
Detergents
Adequate and in a simple way The use of special detergents is considered. Their cost rarely exceeds reasonable limits. For correct selection make sure there are no abrasives. Often the ingredients are indicated on product packaging, or special notes are made.
Cleaner acrylic bathtub used for small and large cleaning volumes. Appearing stains are removed using:
- Cif– for bathtubs, sinks, tiles and toilets. The composition does not contain abrasives, which is safe for acrylic. The reasonable price and variety of composition types (spray, paste, cream) make it a popular product among buyers. After cleaning, a film appears that protects it from further formation. limescale.
- Akrilan– foam for baths and showers. When using, leave only until completely dry, without rinsing.
- Bass– cleaning product, used daily. Sold in liquid form.
- Tim-Profi– an environmentally friendly product that helps fight unpleasant odors, effective for heavy soiling.
- Cinderella– a popular substance that emits a pungent odor, so when spraying (sold as a spray), wear gloves and a special mask.
- Chister– a composition for quickly removing dirt, promotes the decomposition of stains and grease stains. Consists of a polymer that protects against fungi.
In addition to those listed, allowed Use of the following products is at your own risk:
- Sarma;
- SunClean;
- Luxus professional;
- L.O.C.Plus;
- Cillit;
- Acryl – Net;
- Star – Acrylate;
- Triton;
- RAVA K;
- Panny.
Citric acid solution
Citric acid is an organic acid with a relatively high pH - a solution indicator. The materials perfectly remove plaque, grease and other contaminants. Organic acid is especially effective in affecting ordinary substances, so it is easy to clean off fat with its help. IN pure form it has an adverse effect on acrylic, because mix into solution:
- Fill ⅔ full warm water;
- Pour out half a liter of acid;
- Mix the consistency and leave overnight;
The method is effective, but aggressive towards acrylic, and it is not recommended to carry it out more than 0.5 years. After standing for about 12 hours, the solution descends. Citric acid should be stirred more thoroughly than vinegar - completely dissolve it for further precipitation. Finally, the structure is washed with a stream of water from the shower and wiped with a soft cloth. Rub additionally to add shine.
Apple vinegar
A practical substance, but it does not always have a positive effect on acrylic. The main feature is low pH and high acidity. For a material, this factor turns out to be critical, especially if there are scratches. You should work quickly and carefully. The recommended method is to generously soak a cloth in the solution, apply it to the stain and pour water on it.
We recommend using this method at least once every six months. In case of heavy contamination:
- Prepare 9% vinegar in an amount of 1 liter;
- Fill in hot water two-thirds;
- Pour out the vinegar;
- Wait for the night;
- Rinse and wipe
Soda
Regular soda removes plaque. The composition has a highly alkaline environment that breaks down fats and strong compounds. In most products it is present in the form of compounds or in its usual form. There are two types: food and calcined.
Use this method once every 3-5 months. Baking soda This is a weak alkali, while calcined alkali is strong, with a powerful abrasive effect. Use only baking soda.
- Place 2-3 tablespoons of baking soda on a plate;
- Pour a glass of water;
- Wet the soft side of the sponge with the solution;
- Apply the mixture by dabbing rather than rubbing;
- After 15 minutes, rinse with water and clean with a cloth.
Never use undiluted baking soda! It has a strong abrasive effect and will damage the body.
If you need to leave the surface in its original form, use distilled or filtered water. In some cities, tap water contains large amounts of calcium, which reacts with soda to form fine sand-like particles. Using water will get rid of it. The advice is also relevant for other cleaning methods involving the use of chemically active substances.
Toothpaste
Acrylic came to plumbing from dentistry - it was used for lining the frames of dentures and making crowns, so cleaning the bathtub with toothpaste is quite acceptable.
The procedure should not be carried out more than once every two months. Buy non-abrasive pasta. The manufacturer may not indicate this on the packaging. Abrasive particles They look like small grains of sand that remove plaque from teeth, but they will greatly damage the surface of the bathtub. Before use, squeeze a small amount of paste onto your finger and rub it - the sand is immediately noticeable.
- Apply the paste to a sponge or napkin;
- Wipe the dirty surface;
- Clean with water;
- Rub until shiny
Video: how to wash an acrylic bathtub
The video below provides detailed tips on how to wash an acrylic bathtub.
Let's look at the main ways to clean an acrylic bathtub:
Contraindications: what not to use when cleaning
A few words about how not to clean an acrylic bathtub at home. We do not recommend using:
- Acetone– corrodes plastic, causing holes to appear.
- Abrasives– spoil the surface, leaving scratches and reducing the thickness of the enamel.
- Mixture of several components– creates the opposite effect, scratching the walls.
The appearance of acetone in the room should be completely eliminated. The element is chemically active and acts as a solvent. 10-20 ml is enough to make a dent on the surface of the structure.
Wash away chemical active substances cold water. Heat increases the reaction rate and surface damage will occur faster.
Compatibility of detergents with acrylic surfaces
Is it possible to wash an acrylic bathtub with Domestos or a mixture of substances? It is not advisable to mix with:
- Formaldehyde– they are not compatible with acrylic.
- Chlorine– its use creates pores, shortening the service life of the product.
- Acetone, ammonia- corrode the walls.
Domestos, Sanox, Pemolux and Selite contain hydrochloric acid, which destroys protection. Initially, it is bleached, but then it absorbs plaque, becoming dirty faster. Therefore, such detergents cannot be used.
Disinfection with white
An acrylic bathtub is a way to forget about fungus forever, but it’s not ideal either. The fungus does not appear on the material, but easily multiplies on plaque, fats and other organic substances with nutritious microflora. Contamination should not be allowed to appear for a long time, and if it does appear, complete disinfection should be carried out periodically.
Fill the bathtub with water at room temperature;
- Add 2 liters of white (7%);
- Do not touch for 10–15 minutes;
- Rinse off the water and refill;
- Remove any remaining bleach and drain the water;
- Wipe dry with a cloth.
Rules for proper use
The bath does not require serious care, but it is still necessary to follow the rules.
- Periodically bringing plumbing fixtures into decent condition in 5 minutes - after water treatments rinse clean water . Acrylic does not absorb dirt, so this type of washing is sufficient.
- Wipe the bath after use sponge with soapy water. Next, dry to avoid streaks.
- To remove scratches there are restoration kits- They are sold in hardware stores.
We will send the material to you by e-mail
A beautiful and elegant bathroom needs proper care
The characteristics of acrylic are such that it is wear-resistant and repels dirt on its own, which makes the product especially attractive. But the downside is that the surface is prone to scratches.
If you know how to care for an acrylic bathtub, it will remain white long years. Daily cleaning after use is important. Constant care of the surface of the bathtub is carried out with a soft sponge or cloth. Apply a suitable product to them and wipe the product. After this, it is important to rinse it and wipe it dry. If the water is soft, then such a daily procedure will ensure the whiteness of the bathroom for a long time.
How to use household chemicals to clean an acrylic bathtub at home
Abundance of household chemicals for cleaning different surfaces is often confusing. From the entire range of cleaning products available on the market, how can I clean an acrylic bathtub at home?
They work well Akrilan, Cillit, Sarma, Acryl-Net, Star-Acrylat. Any of these products are applied to a sponge or napkin, which is used to wipe the walls of the container, and leave for several minutes. After some time, the cream-gel is washed off with warm water. It is important not to forget to wipe everything dry!
Many people are wondering whether it is possible to wash an acrylic bathtub with Domestos: if you do not violate the cleaning rules, then you can. Domestos is not left on the surface for a long time due to the strong acids in its composition. Leaves for 5-10 minutes, then rinses off with a sponge. If scratches suddenly appear, they are treated with mastic or furniture polish.
How to wash an acrylic bathtub at home using available means
If there are no purchased products, then how to clean an acrylic bathtub at home? It is not forbidden to wash the surface with dishwashing detergent, liquid soap or shower gel. But citric acid and vinegar work great.
Citric acid and apple cider vinegar as acrylic bath cleaners
We'll tell you how to clean an acrylic bathtub at home with citric acid or vinegar.
How to clean an acrylic bathtub with a certain type of contamination
Let's find out how to wash an acrylic bathtub if it has dirt such as lime, rust, or yellowness on it.
Yellow spots and rust
Seeing rust on acrylic, many housewives get scared and worry about how to clean an acrylic bathtub. Their fear is justified: acrylic surfaces are easily damaged in attempts to overcome rusty tracks.
Remove rust "Sanklin", "Mr. Cheester" or means "Triton". The sight of a yellowing bathtub can upset any owner. Yellowing can occur due to incorrectly selected cleaning products, advanced age of the product, or excessive water hardness. The “adult” container is updated by bleaching the liner, and the water hardness can be softened a little by special means, added during bathing. Acrylic care products address the problem of yellowing: they are applied to the entire surface, and then washed off after a while.
Limescale, sealant and adhesive
Limescale deposits should be washed off immediately: you can get rid of it with a soft cloth and lemon juice. How else to clean an acrylic bathtub from lime: fill the entire container with warm water and add at least 1.5 liters of a 7% solution of citric or acetic acid to it. Mix everything and leave for 12 hours.
The water is drained, the container is rinsed and wiped dry. The procedure is carried out once a year.
Important! You cannot peel off the sealant or glue - there is a high risk of damaging the coating.
From chemical solvents with silicone sealant will cope: Quilosa, Penta-840, CRC Gasket Remover.
Related article:
How to wash a mirror without streaks in different ways: water, various folk remedies, household chemicals, a napkin with an antistatic agent, how to remove limescale and traces of stickers and markers - read the publication.
Caring for an acrylic whirlpool bathtub
Caring for acrylic whirlpool bathtubs includes cleaning the nozzles from soap scum and salt deposits. To cope with this problem, 20 liters of a weak chlorine solution is poured into the hydromassage system, after which it is safely drained.
Acrylic bathtubs have won the love of housewives all over the world with their smooth surface, glossy shine and impeccable whiteness. Lighter plastic models of various shapes and sizes have successfully replaced clumsy cast iron washing containers.
Happy owners of acrylic plumbing fixtures often wonder how to clean a hot tub in order to preserve the original appearance of the product for a long time. In fact, you should be careful in this matter, since not every cleaning product is suitable for mechanically fragile plastic. In this article we will tell you how to care for an acrylic bathtub so as not to spoil it.
Advantages of acrylic
Many homeowners are concerned about the question of how to clean an acrylic bathtub, since they have heard a lot about the capriciousness of plumbing equipment made from this material. In fact, acrylic products are much easier to care for than steel or cast iron wash containers.
The ease of cleaning is explained by the following properties of the polymer:
- Low porosity. There are practically no pores on the acrylic surface, so it does not absorb dirt, but repels it, so daily cleaning of an acrylic bathtub can be done simply with warm water and a soft cloth.
- High smoothness. Smooth surface acrylic does not allow dirt and harmful microorganisms to clog into the structure of the material, so it is easy to clean the bowl even without the use of abrasive detergents.
Note! Manufacturers often talk about the “self-cleaning effect” that they have quality products made of acrylic. This term means that their nasty surface repels dirt, so you have to clean the bathtub less often. In most cases, you can wash an acrylic bathtub with warm water or soapy water.
Typical contaminants
Since polymer plumbing fixtures have replaced cast iron and steel fixtures relatively recently, the question of how to clean an acrylic bathtub at home is relevant for many responsible housewives. Acrylic products repel dirt, however, intensive use of the device leaves its mark, deteriorating the appearance and hygiene of the washing container. Most often, the following contaminants occur during the use of a bath:
Important! Properly caring for your plumbing fixtures so that old stains do not appear on them is much easier than washing an acrylic bathtub. Therefore, it is important to rinse regularly inner surface bowls with warm running water and then wipe dry with a soft cloth after each use.
Many housewives do not know how to clean an acrylic bathtub, so they use completely inappropriate products that corrode, scratch or otherwise damage the product. Not proper care– the most common reason premature wear of acrylic sanitary ware. Manufacturers recommend not using powders to clean such bathtubs; instead, it is better to use a delicate, gentle washing gel or cream. To care for acrylic sanitary ware There are 4 categories of cleaning products used:
Please note that if you are not sure what product to use to wash your acrylic bathtub, it is better not to take unnecessary risks. It is better to try what effect the composition will have on a small area of the surface, and only then continue cleaning the product.
"Forbidden" techniques
High quality acrylic plumbing fixtures are a godsend for modern housewives who save time on everything they can. At correct operation it retains whiteness and shine even without the use of special products. However, washing an acrylic bathtub with the wrong household chemicals can ruin the product. Manufacturers recommend not to use for care:
Prevention
An important measure to combat contamination on the surface of acrylic bathtubs is proper care in compliance with the manufacturers' recommendations. Using the product correctly is much easier than washing an acrylic bathtub at home. Compliance with these 4 simple rules significantly extends the service life of plumbing fixtures:
Remember that by using a low-quality or unsuitable product to clean an acrylic bathtub, you are not getting rid of dirt, but of expensive plumbing fixtures!
Video instruction
Almost every modern housewife has faced the problem of how to clean an acrylic bathtub at home. These are the types of bathtubs that are most popular today, because these are the models that are distinguished by the most exquisite design and not bad performance characteristics. But polymer material requires special care and the use of certain products household chemicals. In this article we will share with you secrets and recommendations for cleaning acrylic surfaces.
Features of acrylic bathtubs
Acrylic - plastic material, which has a certain level of rigidity and durability. Acrylic bathtubs are lightweight, convenient and easy to maintain, and therefore are quickly replacing cast iron products with modern market plumbing equipment.
Acrylic plumbing fixtures are manufactured according to one of the following technologies:
- Extrusion - a certain amount of fiberglass is added to the plastic to give rigidity and epoxy resin. Such plumbing products are installed on a specially made frame made of metal or moisture-resistant wood.
- Casting - allows you to create a more durable and rigid structure that can be installed directly on the legs. Such products are resistant to mechanical damage, and therefore much easier to clean.
Important! Acrylic bathtubs are easy to clean thanks to special additives that prevent the growth of bacteria, fungal infections and mold.
Another advantage of acrylic is its resistance to corrosion, and therefore no rust stains.
How often should I clean?
To keep your acrylic bathtub clean at all times, it needs to be cleaned as often as possible. It is much easier to regularly wash off minor stains from an acrylic surface than to then spend a lot of time looking for ways to remove serious and deeply ingrained stains:
- After each bath, the bath should be rinsed with water a small amount detergent, such as liquid soap.
- After completing the procedure, wipe the surface dry with a clean soft cloth or terry towel.
Important! It is necessary to clean the bathtub using more aggressive agents once every 2-3 weeks.
All recommendations for cleaning acrylic surfaces are similar to the rules for caring for other materials, but they have certain features. To quickly and efficiently get rid of any contaminants, use the following materials:
- Foam sponge with a soft surface.
- Fabric material
As detergents you can use: traditional methods cleaning products, as well as household chemicals - various powders, pastes and gels.
Use of household chemicals
If you value quick and high-quality results, then when deciding how to clean a bathtub covered with acrylic, pay attention to one of the following cleaning products from proven and well-established manufacturers:
Cif
One of the main positive qualities This detergent is versatile in use. The cleaning composition is available in the form of a gel or spray, which does not contain abrasive substances that can scratch or otherwise damage the surface of the bathtub.
This product is suitable for cleaning both acrylic and other surfaces - ceramics, plastic, stone or enamel. This detergent trademark has high efficiency cleaning rust, grease, yellow or lime stains.
Important! It is also worth noting that this detergent is affordable.
Bass
A liquid cleaner designed specifically for removing dirt from the surface of bathtubs and showers. To achieve the desired cleansing result, this substance should be used according to the following algorithm:
Important! To restore the shine of the surface, treat it with a special polish, which can be purchased at any household chemicals store.
Mr. Chister
This product is available in the form of a spray, which contains polymer substances. They provide the following effect:
- Antifungal effect.
- Cleansing property.
- Antibacterial treatment.
Important! Before cleaning an acrylic bathtub from limescale using this product, carefully read the instructions provided by the manufacturer on the packaging.
Akrilan
A cleaning composition that is designed specifically for treating acrylic surfaces. The product is produced in the form of foam, which is applied to the surface of the bath or shower.
Important! This product is especially effective in dealing with contaminants such as mold, rust, soap solutions, fungal formations and limescale.
Folk cleaning products
If for some reason you do not want to use household chemicals, then popular and time-tested ones will come to your aid. folk remedies, for example, citric acid and vinegar solution. These substances can be used in one of the following ways.
Method #1:
- Dilute half a sachet citric acid in 1 glass of warm water.
- Stir the resulting solution until the granules are completely dissolved.
- Soak a soft foam sponge in the resulting product.
- Treat the entire surface of the acrylic bathtub with the solution.
- Leave the treated plumbing for 10-15 minutes.
- After re-wetting the sponge in the citric acid solution, treat the contaminated area.
Important! For complete recovery appearance For acrylic surfaces, the cleaning procedure must be repeated 2-3 times.
Method #2:
- Fill the bath with water whose temperature does not exceed 20C.
- Add 1.5 liters of solution to water table vinegar or a pack of citric acid.
- Stir the resulting composition until the active substance is completely dissolved.
- Leave the plumbing in this state for 12 hours.
- Drain the bathtub.
- Rinse the acrylic surface thoroughly with running water.
- Wipe the bathtub dry using a soft cloth.
- Polish the surface special composition household chemicals for acrylic.
