When setting up, we use imported devices, which are quite rare to find in the hands of other engineers.
Repair of wall-mounted and floor-mounted gas heating boilers
If there is any suspicion of deviation from normal operation equipment or it simply does not turn on, you can easily call a gas boiler repair specialist to your home in short time by calling our company or leaving a request on the website. Original spare parts that may be needed will always be with you, so that assistance can be provided immediately on the spot and without delay. long term. After all, sometimes even several days without heat in winter period could become a global problem.Our technicians will cope with any problem and make your heating system work reliably and safely. The Victoria company has been repairing wall-mounted and floor-standing gas boilers at home in the Moscow region for more than 10 years. We can also identify any problems with the entire system and fix them, from radiators to chimneys. The company’s range of services allows you to cooperate with us in several areas at once at competitive prices, without wasting time searching for other providers.
We have a wide geographical presence. Calling a gas boiler repair technician to your home is possible not only in the Lyubertsy and Ramensky districts, the urban districts of Bronnitsy, Kolomna and Zhukovsky, where our offices are located, but also in other cities and populated areas in the Moscow region. We can consider other nearby areas upon request.
Please note that urgent repairs gas heating boilers are most often required for equipment that has not undergone regular maintenance. Periodic maintenance is much cheaper than expensive spare parts, plus you have nothing to worry about.
Prices for repair of gas boilers in the Moscow region
The cost depends on the existence of an agreement with our company for Maintenance VDGO or VKGO. We offer high quality and the most low prices for repair of gas boilers at home in the Moscow region. The price list below will help you find out a more accurate cost.If you have entered into an agreement with us for the maintenance of VDGO, then 1 repair and 1 emergency free trip is included in its terms, which is very convenient for you.
| No. | Name of works | Unit. | Price, rub. | ||||||||
| Under contract* | Without an agreement | ||||||||||
| DEPARTURE OF A MASTER WITHOUT A CONTRACT | VDGO | VKGO | VDGO | VKGO | |||||||
| 1 | Weekday | departure | for free | for free | 2500 | 2500 | |||||
| 2 | Weekday night | departure | for free | for free | 3500 | 3500 | |||||
| 3 | Day off | departure | for free | for free | 3500 | 3500 | |||||
| 4 | Weekend night | departure | for free | for free | 4500 | 4500 | |||||
| Repair/adjustment of wall-mounted and floor-standing gas boilers | |||||||||||
| 1 | PC | 1500 | 1500 | 1500 | 1500 | ||||||
| 2 | Setting up a gas multiblock | PC | 2000 | 2000 | 2000 | 2000 | |||||
| 3 | PC | 1500 | 1500 | 1500 | 1500 | ||||||
| 4 | PC | 3000 | 3000 | 3000 | 3000 | ||||||
| 5 | PC | 500 | 500 | 500 | 500 | ||||||
| 6 | Audit circulation pump | PC | 700 | 700 | 700 | 700 | |||||
| 7 | PC | 2000 | 2000 | 2000 | 2000 | ||||||
| 8 | Cleaning the built-in filters | PC | 500 | 500 | 500 | 500 | |||||
| 9 | PC | 3500 | 3500 | 3500 | 3500 | ||||||
| Repair / adjustment of gas atmospheric boilers | |||||||||||
| 11 | Replacing a spare part/functional unit | PC | 1500 | 1500 | 1500 | 1500 | |||||
| 12 | PC | 2000 | 2000 | 2000 | 2000 | ||||||
| 13 | Cleaning, setting gaps of ionization and ignition electrodes | PC | 2500 | 2500 | 2500 | 2500 | |||||
| 14 | Conversion to liquefied gas | PC | 3500 | 3500 | 3500 | 3500 | |||||
| 15 | Cleaning (rinsing) the boiler body | PC | 3500 | 3500 | 3500 | 3500 | |||||
|
Repair/adjustment of gas forced-air boilers (low temperature / condensing) |
|||||||||||
| 16 | Replacing a spare part/functional unit | PC | 1500 | 1500 | 1500 | 1500 | |||||
| 17 | Air Damper Setting | PC | 2000 | 2000 | 2000 | 2000 | |||||
| 18 | Setting up the gas throttle | PC | 1500 | 1500 | 1500 | 1500 | |||||
| 19 | Setting up a gas multiblock (per step) | PC | 2500 | 2500 | 2500 | 2500 | |||||
| 20 | Checking the chimney draft (pressure/discharge) | PC | 500 | 500 | 500 | 500 | |||||
| 21 | Setting aspect ratio fuel-air mixture | PC | 6500 | 6500 | 6500 | 6500 | |||||
| 22 | Setting the operating pressure in the expansion tank | PC | 1500 | 1500 | 1500 | 1500 | |||||
| 23 | Setting the condensing mode | PC | 1500 | 1500 | 1500 | 1500 | |||||
| 24 | Setting the air pressure switch | PC | 1500 | 1500 | 1500 | 1500 | |||||
| 25 | Setting the gas pressure switch | PC | 1500 | 1500 | 1500 | 1500 | |||||
| 26 | Cleaning, setting gaps of ionization and ignition electrodes | PC | 2500 | 2500 | 2500 | 2500 | |||||
| 27 | Boiler body cleaning up to 72 kW | PC | 4500 | 4500 | 4500 | 4500 | |||||
| 28 | Boiler body cleaning from 72 kW to 140 kW | PC | 5500 | 5500 | 5500 | 5500 | |||||
| 29 | Boiler body cleaning over 140 kW | PC | 7500 | 7500 | 7500 | 7500 | |||||
The ITEC service and repair center carries out any repairs of boilers and heating systems from various manufacturers. We have become one of the largest authorized Centers for Buderus, Wolf, Oilon and Viessmann. We repair Ferroli boilers, Baxi, Bosch, De Dietrich, Protherm, Vaillant and other brands.
Boiler repair in Moscow and other regions
24-hour repair of any boilers in 1 day with a guarantee. We have been doing heating repairs for over 18 years. We work in Moscow and the Moscow region, as well as in nearby regions: Vladimir, Kaluga, Ryazan, Smolensk, Tver, Tula and Yaroslavl regions.
Our advantages
We arrive for repairs within 2-3 hours. For this, we have our own fleet of service vehicles, fully equipped with everything necessary to resolve an accident.
Our specialists have over 8 years of experience. All of them are regularly certified by heating equipment manufacturers and undergo advanced training courses. Each engineer always has a set of the most popular spare parts and consumables with him. All this allows us to eliminate the breakdown of your equipment during one visit.
24-hour warehouse for spare parts and Supplies in the center of Moscow. This allows for fast delivery necessary details to the objects if the engineer does not have them with him. The spare parts catalog is constantly updated and includes even rarely requested items. Other service departments have appreciated the convenience of our warehouse and regularly purchase components there.
A complex approach
Elimination of accidents in heating systems implies A complex approach to diagnosis. Our specialists make sure to conduct a detailed audit of all engineering systems, including doing an air analysis and checking the chimney for leakage of combustion products.
We pay special attention to water treatment and power supply systems, on which the stability and reliability of the heating system depends. Pump groups, additional cylinders and expansion tanks, thermal insulation of the supply and transport circuits - each of these factors affects the efficiency of your boiler room.
Prices for on-site and diagnostics
Price list for on-site service engineer and diagnostic work:
Right now you can call our phone number or leave an online application. The engineer on duty will contact you and calculate the cost of repairs. The detailed cost of all ongoing repairs, maintenance, expansion and installation of the heating system can be found in the section
Urgent repairs gas boiler at home is one of the most popular services in our company.
Serviceable and trouble-free operation a gas boiler makes your home cozy and warm. Timely maintenance and repair of such equipment will help you avoid more serious problems.
Most often, repair of a gas heating boiler may be required:
- Due to constant power outages. Power surges and unplanned power outages disrupt the operation of the heating device.
- When using hard water with impurities. Alas, in the Moscow region the quality of water leaves much to be desired.
- Due to improper operation and untimely service
ThermoStream specialists will help you understand the cause of the breakdown, perform comprehensive diagnostics of the equipment and repair it. Considering the complexity of carrying out such work, we advise you not to try to solve the problem yourself, but to turn to professionals.
ThermoStream masters have great experience works and modern equipment. This allows us to carry out urgent repairs of gas boilers in Moscow and the Moscow region without dismantling the boiler and checking it in service center. In most cases, inspection, diagnosis and repairs are carried out right in your home.
We are an authorized service center:
Prices (includes visit, diagnostics, repair):
Wall-mounted and condensing gas boilers up to 40 kW,Floor-standing gas boilers up to 65 kW. |
Cost, rub. |
|
|
Commissioning works. For each additional boiler in the boiler installation +50%. |
||
|
Cleaning the combustion chamber from soot deposits (added to the cost of repair/maintenance work) |
||
Condensing wall-mounted gas boilers from 45 to 80 kW,
|
Cost, rub. |
|
|
Repair/maintenance with a 6-month warranty on work performed and installed spare parts. |
||
|
Commissioning |
||
|
Conversion to liquefied gas without the cost of spare parts |
Included in the cost of commissioning work |
|
|
Cleaning the combustion chamber from soot deposits (added to the cost of boiler repair/maintenance work) |
||
|
Cost of repair/maintenance work for boilers over 300 kW |
by agreement |
|
Condensing wall-mounted gas boilers from 80 to 300 kW,
|
Cost, rub. |
|
|
Repair/maintenance with a 6-month warranty on work performed and installed spare parts. |
11 000 |
|
|
Commissioning of a condensing gas boiler. |
Note:
- The cost of work on objects located from the Moscow Ring Road in a zone from 50 to 100 km increases by 10%.
- The cost of work on objects located from the Moscow Ring Road in a zone over 100 within the boundaries of the Moscow Region increases by 20%
- Assembling the boiler block, replacing the section:
- Protherm ( low power) - 13,500 rub.
- Viessmann, Vaillant up to 63 kW - 16,500 rub.
- Viessmann, Vaillant, Protherm from 65 kW to 160 kW - 22,000 rub. (higher power by agreement).
This website is for informational purposes only and under no circumstances constitutes public offer, determined by the provisions of Article 437 (2) of the Civil Code of the Russian Federation.
Repair of Buderus boilers is one of the most important areas of our company’s activities. We carry out all types of repairs of gas boilers and boilers using any other fuel. The list of our services includes both warranty service and post-warranty repairs. gas burners, boilers, water heaters and the entire range of heating equipment from Buderus and other European companies.
Thanks to the high qualifications of our craftsmen, we can guarantee fast and high-quality repairs. Buderus is an official partner of our company, which allows us to receive original parts from the manufacturer, therefore, by providing maintenance services for heating equipment, we can guarantee the high quality of components.
Timely repair of gas boilers - accident prevention
Don't put off repairs for too long. Parts of any heating system wear out sooner or later. If they are not changed in a timely manner, the number of minor problems will increase, causing frequent interruptions in the heating supply, and in the future a serious accident may occur. Don’t go to extremes; take care of repairing your boiler now.
We provide a full range of services for the repair of gas boilers and boilers operating on diesel fuel Buderus, Baxi, Vaillant, Protherm, ACV, Wolf, as well as burners and water heaters, taking into account all the manufacturer’s recommendations. If necessary, you will be provided with emergency repairs in a short time.
We repair Buderus - warmth and comfort in your home
Buderus repair includes:
- job analysis existing system heating,
- measuring input voltage, measuring gas or fuel pressure at the injector,
- express analysis of flue gases,
- troubleshooting identified problems,
- cleaning the boiler and burner.
Upon completion repair work In order to determine the effectiveness of the changes made, our company’s specialists will conduct comprehensive testing of your heating system. High-quality diagnostics and timely repairs boilers Buderus - reliable way save yours heating system from premature wear and prevent accidents. Any questions? Call our engineers: 8 495 668-07-81
Modern gas boilers are quite complex technological equipment. With proper care and proper handling, the gas boiler will serve for a long time without any failures. However, even the most expensive and functional equipment has its resource, after which various types of malfunctions begin to appear.
Knowing the main causes of problems and the procedure for eliminating them, you will be able to repair your gas boiler with my own hands. This is a very painstaking, responsible, but in most cases relatively uncomplicated work.
First of all, it is necessary to establish why any malfunctions may occur in the operation of gas heating boilers. A number of different factors can lead to problems.
Electricity
Modern gas boilers are equipped by various means automation. These products, in turn, are powered by electricity. And, despite the fact that it is already the 21st century and systems for using alternative sources energy, the problem of stability of power grids remains relevant for many regions, especially for remote villages and all kinds of holiday villages.
A sudden shutdown or a strong surge in electricity is one of the main enemies of any modern gas boiler.
To avoid all the associated troubles, buy a high-quality stabilizer in advance. Do not spare money to purchase this device - cheap models are of little use, so it is better to immediately allocate funds to purchase a good stabilizer from famous manufacturer. Rest assured, if the automation breaks down, you will spend much more money on its repair and replacement.
Water
Often used at home wall models gas boilers. Such devices are simultaneously responsible for heating the premises and preparing hot water.
The design of wall-mounted boilers includes a flow-through heat exchanger. Low-quality hard water with various inclusions - main enemy gas boiler heat exchanger. Moreover, under the influence of low-quality water, the heat exchanger can fail in just one season.
To prevent such damage, install special filters. The best option– a complete water purification system. With it, your boiler will work for as long as possible, and using purified water is much safer for your health.
Installation errors
Any knowledgeable person will tell you: installation and wiring of gas heating equipment should be carried out exclusively by qualified specialists.
Even the slightest errors at the stages of installation and connection of equipment can lead to irreversible consequences. For example, incorrectly performed piping in the case of a cast iron gas boiler with a power of more than 50 kW will lead to the fact that when low temperatures the unit will simply crack.
Therefore, if you are not an experienced gas installer, entrust the installation of the boiler to professionals - this way you will save yourself from many problems in the future.
Weather
Adverse atmospheric conditions can also lead to many different problems. During frosty winters, people turn on the heating at almost full power. This leads to a significant decrease in pressure in the gas pipeline system. As a result, boilers cannot reach their full potential.
You will not be able to solve this problem on your own - you still cannot explain to your neighbors that their actions are only aggravating the situation. As a solution to the problem, you can install an additional boiler that runs on a different fuel.
Is it worth repairing the boiler yourself?
A modern gas boiler is a complex and potentially dangerous system. The main danger of such units is the risk of a gas explosion in case of improper handling of the equipment or untimely elimination of various problems.
For maintaining the operation of the gas boiler optimal level Various types of automation respond. An inexperienced user is often unable to understand its structure. Therefore, to resolve serious problems, it is better to immediately invite specialists.
On your own, you can try to eliminate only visible damage and various contaminants that have led to the failure of the pipe, chimney and other parts of the boiler.
There are a number of typical problems that, in most cases, you can fix yourself. Problems will also be listed, in the event of which you can only protect yourself until a specialist arrives.
If there is a distinct smell of gas or smoke in the room, immediately turn off the boiler and leave the room, opening it for ventilation.
Call a specialist immediately. Trying to solve a gas leak problem on your own without the necessary skills is extremely dangerous and unwise.
Flame sensor failure
If the combustion sensor or gas supply pipe is broken, turn off the boiler, close all gas valves and allow the unit to cool completely.
After some time, return to the room to check for the smell of gas. If everything is fine with the draft, try turning the boiler on again. If there is no traction, immediately call a repairman.
Boiler overheating
Overheating is one of the most common problems with modern gas boilers. The reason for this may be a malfunction of automation equipment or a clogged heat exchanger.
Automation repairs cannot be handled without the appropriate knowledge.
You can clean the heat exchanger yourself. The most common materials for the manufacture of heat exchangers are copper and stainless steel. Cleaning them usually isn't a problem, but still be careful.
To clean the heat exchanger, simply remove it and thoroughly clean it with a wire brush. In case of copper heat exchanger, it is better to replace the brush with a metal sponge used for washing dishes.
Charge fan malfunctions
The problem with fans is their bearings. If your boiler fan stops developing the set number of revolutions, try to fix the problem as soon as possible.
To do this, remove the back of the fan, remove the stator and lubricate the bearings. Perfect for lubrication machine oil, but if possible it is better to use a higher quality carbon composition with heat-resistant properties for this.
An interturn short circuit can also cause problems with the fan. Only a specialist can cope with troubleshooting this problem. Submit the stator for repair to replace the winding, or immediately replace the faulty unit with a new device.
Chimney problems
Often, various problems in the operation of a gas heating boiler are caused by excessive clogging of the coaxial chimney.
Remove the chimney and thoroughly clean all its components of soot. This way you will not only return the previous level of efficiency of the unit, but also significantly increase the efficiency of the boiler.
