Interior partitions are an integral part of the interior of a studio apartment. Such an apartment is a room in which initially there are no partitions at all; its premises are limited to only four walls. Using partitions in a studio apartment, you can create and separate a kitchen, dining area, living room, as well as a place to work, a sleeping area or a children's room, depending on the wishes and tastes of the residents of the studio apartment. All these functional areas Studio apartments in general represent one common space, which should be properly zoned and decorated, as well as partitions and furniture should be correctly arranged in order to make maximum use of the space of the room, but at the same time not overload it. Without partitions it is impossible to create different zones in a studio apartment, they are very relevant for owners of apartments with such a layout; designers present many stylish and interesting solutions for zoning.
The method of zoning and, subsequently, the entire interior of a studio apartment as a whole will depend on who such a living space is intended for: for one person, for a couple or for a whole family. But in any case, zoning of a studio apartment is inevitable; the number and purpose of functional zones will depend on the number of people living in such an apartment. For zoning, designers suggest using different ways, such as installing partitions, walls, bar counters, as well as creating a two-level ceiling and floor with a partition between levels, as well as color zoning.
In addition, for stylish and original zoning using a variety of partitions, it is better to use different materials and their colors for the walls and floors in different zones; it is best to make sure that these materials differ in their texture. If you can skillfully differentiate all functional areas in the interior of a small studio, it will be very easy for you to create a cozy atmosphere in the house, you will be able to welcome guests while the bedroom or kitchen will be separated and hidden from prying eyes.
Zoning by color
A double-sided colored partition, which will be decorated on different sides in the same way, will look very interesting. color scheme the functional area towards which it is turned, and a double-sided partition in contrasting colors will look very unusual. Please note that this option is quite expensive.
An alternative, more affordable in cost, would be the division of a studio apartment using building materials different colors. The main condition is right choice color combinations. The right colors can help you create a visually wider and more spacious room. With this method of zoning, it is better not to use dark colors, as they will visually reduce the space of your studio apartment.
photos
Partition options
As partitions, you can use both furniture and ordinary building materials installed in the form of a wall, for example, drywall. It is very easy to make a plasterboard wall with your own hands, since this material is very versatile: it can be easily shaped the required form, it can be easily cut, it can be wallpapered, painted or decorated in the way most suitable for you.
In addition, the role of partitions can be performed by ordinary bookshelf for books, as well as a wall with through shelves on which you can place various elements decor, for example, figurines, flower pots, frames with family photos or beautiful paintings. It is best to use a shallow cabinet as a partition so that in profile it is not wide and does not look bulky.
You can divide the functional areas of a studio apartment using any decorative partition, and its decor can be very diverse: patterns, carvings, as well as more ordinary options - interesting wallpaper with photos, paintings, or just bright combinations contrasting colors.
When dividing functional zones, some people prefer curtains or screens, which looks very beautiful and gentle, but this option is not suitable for every zone. These products are made of fabric and therefore have the property of absorbing odors from the kitchen, so you should not use them to separate the kitchen and living room or the kitchen and bedroom. Screens are more suitable for separating a bedroom and any other area except the kitchen.
You can also install a partition with an arch in the room; it will add beauty and luxury to your interior. You can place beautiful curtains along such an arch. It is best to divide the living and sleeping areas of a studio apartment in this way. There are very unusual options Arch partitions are movable partitions. Such divisions can also have a classic rectangular shape.
The main advantage of a portable partition is its mobility. With its help, you can separate different functional areas at any time, whenever it is convenient and necessary for you. This way, you can often rearrange and change the interior of the studio in an interesting way. Most often, the role of mobile partitions is performed by screens. They can be attached using special devices to walls or to various furniture, thanks to this they are securely fixed and create a new separate functional area.
Sliding
Sliding partitions are the most good decision for zoning a studio apartment. This interior element can provide good sound insulation of different zones from each other. This partition is perfect for dividing a children's area or bedroom. It will help at the right time to hide what is necessary from prying eyes. In addition, if you have a baby at home, you can close such partitions to ensure a restful sleep for him without being woken up by extraneous sounds.
An interesting option would be to install a partition in the form of sliding sliding doors, which can be decorated with images or patterns of your choice. Such doors open almost silently, since they move on wheels on special rails. This zoning will even allow you to create a separate room in your studio apartment.
For the manufacture of sliding partitions, a combination of wood and glass is most often used. In addition, such a partition can be decorated with a mirror, which will make the interior of the apartment more luxurious and at the same time visually expand the studio space.
The most luxurious model of a sliding partition is the radius partition. This model can completely change the appearance of the room, as it introduces smooth lines into the interior of the apartment. This interior design becomes very harmonious and cozy. Important feature Such a partition is a curved sheet consisting of two or more elements. Moreover, these elements can move either independently of each other, or in a cascading manner, when, following the movement of one leaf, the other leaves also smoothly fold.
Very interesting option is the use of partitions for zoning, which, when opened, fold like an accordion. If you completely open such “doors”, you will free up the studio space as much as possible and save it. This is a big advantage of an accordion door over a conventional sliding door. They zone the room very conveniently and take up a minimum amount of space, while decorating the interior. like this sliding partition in the form of an accordion, designers decorate it with gold and silver threads, openwork patterns or interesting images.
A large room, devoid of partitions, in addition to its advantages, can cause a lot of inconvenience to residents. If a strong exhaust hood helps eliminate the odor problem, then with the arrangement of the studio space and its decoration, everything is not so simple. This is where a variety of sliding room partitions come in handy. Unlike stationary partitions, they make it much easier to change the layout if original plan turned out to be somewhat unsuccessful for some reason.
Sliding partitions in the studio
While a bachelor or student can find it more or less easier to settle in such an original room as this, a family with children will not feel very comfortable here at first. Noise in the living room, children not having their own play space, the sounds of the TV that distract sleeping family members or a person working at the computer - all this instantly causes discomfort. Therefore, when buying or renting such a studio apartment, a couple with children should immediately think about the possible division of the premises into functional zones. Visual techniques in the form of different flooring or using several types of wallpaper will definitely not help them. In our case, it is advisable to use something more substantial, such as sliding partitions in a studio apartment.
Such devices are designed in much the same way as simple sliding doors. They have a guide bar, one or more sashes, a roller system that should ensure silent and trouble-free sliding, and a cornice. The enterprising Japanese were the first to use such systems, but soon the Europeans also appreciated this innovation. And now they can be found everywhere, both in office premises, and ordinary city houses or apartments.
Partition material
Of course, most often various types of glass are used here - transparent, tinted, frosted, mirrors. Such products, even by themselves, will elegantly decorate the interior of a studio apartment, completely changing its internal appearance. If sound insulation is important to you, then you can buy sliding wooden partitions with decorative inserts. Installed between the living room and dining room, they are in case of reception big company friends are quickly cleared away, and the hostess has the opportunity to instantly turn her home into a real banquet hall. Cheaper than solid wood, but no less interesting products, are partitions in which the fabric is made of fiberboard or chipboard, covered with natural veneer. Aluminum frames have a similar design, but they are somewhat lighter and are suitable even for wet areas. Frameless structures include sliding partitions made of thick (at least 8 mm) glass. Despite their airy and seemingly defenseless appearance, these systems are very reliable and safe devices.
Radius sliding partitions
This invention allows you to radically change the configuration of the space, and is undoubtedly the most aesthetic option for a sliding structure. Smooth lines bring harmony to the interior, creating a relaxing and cozy atmosphere in the room. These partitions are created according to the same principle as a sliding wardrobe; their main difference is the curved door leaf. The type of support can be either upper or lower. The latter type is usually installed in heavy systems to reduce swinging of the valves to a minimum. The canvases themselves either move independently of one another, or in a cascade - when one half moves, the rest will synchronously fold along the guide.
Living in a studio apartment forces the owner to keep order as much as possible in this deprived internal partitions indoors. Here everything is in sight, any sounds and smells spread inside instantly. The kitchen and living room combined together are pleasing to the eye at first, but after a while the residents begin to feel discomfort and the need to somehow eliminate the design flaws. Sliding partitions in a studio apartment will help you improve your life a little, turning an uncomfortable home into a modern and stylish apartment.
 |
 |
There are many variations on the theme " interior doors", the most popular choice is sliding interior doors. These doors are very stylish, comfortable and versatile, suitable for almost any interior. This article will help you choose the right sliding door or panel to suit your needs.
Pros and cons of installing a sliding structure
Sliding is a system in which the main part of the door (leaf) slides along the wall.
The idea of moving the door along the wall, and not outside or inside the room, was spotted by the Japanese, where, in conditions of severely limited living space, they came up with the idea of moving doors along the wall to save space.
Such an original and slightly unusual design has gained recognition in the everyday life of Russian consumers. This is due to the advantages that these doors provide:
- The sliding door mechanism does not take away usable area your room, when ordinary doors require at least one square meter to fully function.
- The width of the doorway can be easily adjusted using the number of panels, so you can choose a sliding door from 2 panels without sacrificing space, and the option of three sections will give your interior some “zest”.
- You can also use such a system as an interior or interzone sliding partition. This approach will help to divide the space of the room into the necessary sections without any difficulties.
In addition to the advantages, there are a number of certain limitations in choosing sliding doors:
- While saving space for opening (forward and backward) within rooms, sliding doors are at the same time very demanding on the side space of the wall on which they are installed. The so-called “parking” space, where the door moves when opened, imposes restrictions on the choice of location for installing the doors. If there is no parking space, the doors will simply have nowhere to open.
- Noise when opening. The design involves the movement of the door rollers along the rails; this approach is accompanied by the appearance of certain sounds and noises. You should approach the choice of such a door more carefully if you or your roommates have very sensitive hearing, as this may cause discomfort.
- The price tag for such doors will be higher compared to ordinary swing doors, this is due to the cost of the mechanisms.
Types of sliding door designs
Standard
Standard sliding interior doors are the simplest and most versatile choice on the market. Installation takes place in the doorway, and the door itself slides and is securely fixed in the parking space.
Such doors are distinguished by the number of moving panels used in the design:
- Single leaf, have one moving part. The best option for apartments with limited space or narrow doorways.
- Double doors have two leaves in their design. Suitable for large doorways, and two independently movable doors will help you choose the currently required width of the doorway.
If it is necessary to install the door in a strongly limited space, between the bedroom and the corridor or two small rooms, then standard design will suit you perfectly.
Radial
The principle of operation and installation of this design is in many ways similar to the previous design options; the door simply moves to the side along the wall, saving usable space in your home. The difference is that radius doors do not move in a straight line, but in a circle. These doors are chosen for houses that have a curved wall.
Radius doors are used to divide an existing space and give it an unusual shape. This solution is appropriate to apply in creating modern interior, in high-tech or minimalist style.
Harmonic
The accordion interior sliding door is a convenient design, the main leaf is divided into several strips, they do not slide into the storage space, but fold like an accordion (see photo). It is worth saying that this type of door does not take up wall space, and takes up a minimum of space on both sides of the doorway. Folding doors can be used both in a narrow opening and serve as a “moving” wall. The width of the doorway can vary, from a small gap to a full opening of the door.
Coupe
This option is also used as ordinary doors, and can perform the function wall panel. Turn one room into two, create a “secluded corner” in your home, or a relaxation area - quite easily using “compartment” panels.
Using sliding compartment doors, you can limit the space of the kitchen, leaving dirty dishes and workplace outside dining table, and avoid spreading food odors throughout the house.
Selection of materials
The most popular materials for making sliding doors are:
- Real tree
- Fiberboard/MDF
- Glass panels
Tree
Products from natural wood very reliable and durable. Not only the stove itself can be made of wood, but also the door frame, which also uses plastic and metal.
When buying a wooden door, it may not be entirely made of wood, but harmoniously combined with the following materials:
- Glass
- Plastic
- Paper
- Textile
- Mirror
You can create or complement the design of your interior using wooden doors. Ease of processing makes this material suitable for use in many styles, and the ability to combine with other materials makes the use of wooden sliding doors almost universal.
Fiberboard/MDF
Materials such as fiberboard or MDF will be an excellent and cheaper alternative to wooden panels, because they are in many ways similar to wood, and it is often difficult to tell whether it is real wood or fiberboard/MDF. If you liked specific model, made of wood, and you don’t have enough money, pay attention to doors made of fiberboard/MDF, there is a good chance of getting an externally identical model at a more reasonable price.
Sliding glass doors
Glass panels are increasingly finding their use in modern interior design styles. Many variations on the theme of colors, patterns and level of transparency of such doors make it possible to use them as interior doors or partitions, and partial transparency will add additional visual volume to your room.
Selecting an interior panel
Interior panels are a universal product, you can divide the space of a room using sliding door systems. The most popular embodiment of this solution is used for large studio spaces or small apartments; this choice is determined by the requirements of compactness, simplicity and convenience of design.
There are other uses interior partitions:
- A common bedroom for a girl and a boy can be divided into two separate smaller rooms, and each child will be given their own personal space.
- It’s quite easy to create a dressing room in your room, just highlight required area, and use the interior sliding partition as a separator.
- Some rooms have a common area for the kitchen and dining room, limit the kitchen and leave it in unpleasant odors or dirty dishes can be removed by installing a sliding partition.
- Office premises are another application, so, if necessary, provide employees with personal space, create a conference room, small kitchen, or the director's office, you can use interior partitions.
DIY sliding interior doors
The sliding door system is simple enough to do it yourself, if you decide to take this step, follow the following rules and tips. In most hardware stores you can purchase everything if you wish. necessary elements and components for creating sliding doors with your own hands - panels, rails, fasteners, fittings. Remember that before choosing materials you should familiarize yourself with possible variations and main characteristics, this approach will allow you to choose the best from those on the market.
Single door system Double door system Cascade 2 doors Cascade 3 doors Cascade 4 doors
First you need to select the type of installation of the moving mechanism, there are two options:
- The overhead option for installing the mechanism is the easiest way. Door guides and other mechanisms are installed outside the door. The disadvantage of such an installation is that open mechanisms may not have the most aesthetic appearance, and the canvas will always be visible.
- Built-in option. Here, all the mechanisms, guides and the door itself are hidden inside the wall, it looks quite beautiful, but if you are a beginner, you may have difficulties with such a complex installation.
Now we need to choose a door design that suits our requirements - standard, radius, interior accordion door or compartment door. After this, it is worth determining the design for the future door, and the base from which it will be assembled.
The mechanism, design and materials have been chosen, now we need to take care of the dimensions. In order not to be mistaken in the calculations, it is worth considering several important points, namely:
- The height of the leaf should be less than the height of the doorway (an exception would be the overhead installation method).
- Gaps, they need to be set extremely accurately so that your door does not cling when opening/closing.
- The height of the roller mechanism, the assembled door will have a greater height than just the leaf.
When applying markings, it is better to use water or laser level to avoid skew.
Now you can fasten the roller mechanism; the method of fastening largely depends on the type of installation, as well as on the mechanism itself. It would be a good idea to ask a consultant for advice before installing fasteners.
By choosing a design that has upper and lower guides, you will thereby improve the sound insulation of the door. This is achieved due to a tighter fit of the door to the opening.
Having securely secured the guides, you can begin installing the rollers. Depending on the weight and size of the door, 1-4 rollers may be needed. We screw the rollers to the leaf and install them on the guides, after which it is worth checking the movement of the door and the accuracy of the gaps. If everything is in order, then all that remains is to add accessories. This is the final touch, your door is now completely ready.
Recently, in addition to traditional swing doors, which are familiar and understandable to the consumer, you can increasingly see such non-standard option like sliding interior doors. They are increasingly installed in different rooms– for example, when zoning or for special allocation of a certain part of the usable area.
Since sliding models look beautiful and cozy in any place (they can even be used for a swimming pool and bathroom), you can think about how to install them in your own home.
Advantages and disadvantages
The main advantages of sliding interior doors include significant space savings, external beauty, neatness, aesthetics and ease of use. Since the mechanism involves easy movement of the shutters along the guides, opening and closing such models is very easy and convenient.
However, when installing a simple sliding structure, the owner should take note of the fact that it will not be able to provide the room with complete sound insulation - except perhaps when installed behind a false wall, if we're talking about about inexpensive options.
Sliding doors can retain heat, but much worse than regular doors, so installing them in a corridor or hallway as an entrance door is not worth it.
The mechanism itself and the installation of sliding doors are not cheap; if you want to insulate them or provide a decent soundproofing effect, you will have to spend a lot of money, but in many cases it justifies itself.
Design, device and components
The operating principle of such systems has two varieties.
- There are parallel sliding models, including more than one leaf. IN in this case the door leaf moves parallel to a vertical surface. If soundproofing properties are important to the buyer, it is recommended to install this type of structure. In addition to such a reliable and monolithic model, there is an even lighter type of door, which is called folding-sliding. It consists of a certain number of canvases, which appearance very similar to an accordion.
This model will not provide sound insulation, but it is the most optimal for zoning space (for example, in one-room apartment).
- More simple folding-sliding system often comes with only the top rail. The weight of such a design can be considerable, especially if the canvas is made of polycarbonate or glass, so you should stock up on reliable fittings in advance High Quality.
A standard set of interior doors usually includes the following elements:
- guide rails (or lower and upper profiles), the length of each of them is 2000 cm;
- canvases, they must be securely fastened to rails and rollers, so the kit must include a certain number of them. It can be different and depends on the type of door structure;
- fasteners;
- suspension, required quantity additions and platbands - as a rule, with a reserve;
- ready-made door panels or doors (either “accordion” or classic, monolithic models);
- decorative strip to hide the mechanism on rollers, with an entry in a box or in a box;
- limit stops;
- clamp and cassette (several pieces) - in order to hold the sashes in the desired position when they are in open position;
- handle and lock with the ability to be built into the door leaf.
Depending on the type of model, internal sliding doors can be with or without a threshold. Also, many manufacturers offer the purchase of additional accessories. For example, mosquito net, if you plan to install a sliding system on the terrace, and for those buyers who dream of insulated doors, a special seal may be offered.
Types of systems
Like other door systems, sliding door systems are also divided into several types based on how they open and close: there are folding, sliding and sliding doors.
- Rollback (or rollback) systems. They usually look like a canvas with one leaf, for the movement of which special hanging profiles are attached, moreover, in one direction or the other. The width of the structure for doorways is no more than 900 mm. This is an overhead model with a hinged type of fastening mechanism - at a height that in total amounts to the height of the rollers and the gap during installation.
- Sliding (or sliding) models are similar in installation principle to sliding structures. Such doors can move in different sides, as well as the method of opening each door in turn. If desired, you can equip such a model with a chain mechanism for opening it, as in sliding wardrobes: if one door moves, the other automatically follows it.
- Folding or collapsible- the same “accordion”, which is most often used as a partition door or screen door, separates the necessary space in the room. They open in the same way as previous systems, moving along a special profile guide with a roller mechanism. The difference from other models is that their canvases are not sliding, but folding, consisting of several slats. Fold one way, using loops. The main advantage of the “accordion” is that it is very compact, but handling such a door should be as careful as possible.
- If the owner wants to give the doors additional noise and sound insulation, they can be installed with a porch. In this case, the canvas will be even more silent and airtight. Also, for maximum convenience and ease of installation and operation, sliding models with telescopic mechanisms are often installed: the sash moves only in one direction, which can be especially convenient in rooms with a non-standard layout.
What are the types
Sliding doors with one leaf are installed in small apartments not only for the sake of saving space, but also for the purpose of interior decoration it looked cozy and neat. Installation is very simple; there is no need to install a door frame, but the opening itself will need to be strengthened and given a good finish.
Such models are attached to both walls and ceilings - the included fittings provide one or another type of fastening. As a rule, the structure itself is quite lightweight; often single-leaf panels are frameless, vertically sliding. Also, lately the Japanese-style lattice door has become very popular. It perfectly zones the room and, at the same time, decorates it.
Double doors
Internal double-leaf interior structures are mounted in wide openings and are distinguished by functionality and ease of use. Looks ideal in rooms with large area, also performing a decorative role. They consist of two panels, which, depending on the installation possibilities, can simply move along the walls, or be retractable into the wall, hidden when opened. One half of the panel is easily stopped with a latch so that it does not interfere, while the other can be used.
The fixed canvas will advantageously hide the room, and the chassis will perform the main function.
Tricuspid
Three-leaf doors are very convenient to use and are installed if the room has wide openings of non-standard sizes. Three doors successfully cover any opening, and for beneficial zoning, the construction of an additional wall is not required. By installing the opening mechanism at the top, the space gains visual integrity. The undoubted advantage of three-leaf models is that there is absolutely no need to install floor rails.
Three-leaf sliding options are often made according to the principle of cascading panels, each of which has its own rail. When they open, they overlap each other and it looks very nice. The sashes are also installed differently: for example, one of them stands in the center and moves in different directions, passing in turn behind the other two, which are permanently mounted. At the request of the customer, it is possible to do exactly the opposite: the side doors move, and the middle fixed canvas can perform a panoramic function of decorating the room; a drawing or a beautiful stained glass window is often made on it.
Pencil case
A pencil case is a very interesting and useful type of sliding structure. It received its name based on the technical features of its operation. Roll-out canvases with sound insulation move along the walls according to the principle of a school pencil case. They are universal in that they are successfully used in a wide variety of premises, from offices to residential ones. The cabinet door takes up little space, and its design and configuration can be assembled and formed according to the customer’s wishes.
Semicircular radius
Semicircular radius doors are an original and, perhaps, the most beautiful and aesthetic invention of design minds. This is a large and wide structure with a convex plan, often glazed, with certain types of decoration on the panels. This rotary-sliding model, unfortunately, is not intended to be installed in small spaces. Its main purpose is to give comfort and beauty. large areas supermarkets, large country houses, offices and apartments with high ceilings.
Intra-opening
Functional internal doors are a model with elements built into the opening, which provides both aesthetics and additional benefits. The doors move towards each other along a counter guide, while ½ of the doorway remains free for entry and exit. Moreover, the location of the opening itself can be changed as desired.
"Accordions"
Sliding partition doors can be made in the form of a lightweight “accordion” made of plywood or plastic. There are entire systems of internal partitions, including corner ones, the number of panels of which can vary from two or more. To give the structure special strength, aluminum is most often used as a material, and the doors themselves can have glass inserts or made of any other transparent material.
A multi-leaf interior partition works on the principle of moving the opening to the left or right. Sliding system They are absolutely silent and soft, and the closer allows them to be closed as tightly as possible.
Lift-and-slide HS-portal
Lifting and sliding models of the HS-portal type include movable and fixed panels. They are designed to cover large doorways. It is this portal design that can provide a completely open space, devoid of both panels protruding from the wall and inconvenient vertical racks, which are often indispensable when installing three or more panels.
Thanks to the portal principle, you can completely remove the boundaries between rooms at any time, turning the room and the terrace into one, and, if necessary, close the doors back. Such designs can be warm and even double, to ensure heat retention in cold weather. winter time. It is very easy to operate such doors, despite the fact that they can weigh 300 kg or more.
Dimensions
In accordance with the GOST standard in Russia optimal height door panel is 2000 cm, and the width of models with one leaf is from 600 to 900 mm. Most manufacturing companies try to produce their products based on these indicators, so choosing the right kit is not difficult. An advantage of standardization is the lower price for such a set of panels and fittings, however, given the fact that in the vast majority of cases strict dimensions are not adhered to during construction, you still have to order doors according to individual sizes.
Large doorways, typical of hypermarkets and large private mansions, have non-standard dimensions, for the removal of which it would be best to invite a specialist to avoid mistakes. If non-standard wide doors are ordered, it is important to take into account the gap so that the leaf opens and closes well, and the width of the leaf itself must correspond to the dimensions of the side walls.
Non-standard designs can be different: light or heavy. Typically, the large weight and thickness of the sheets is not a problem, because the control mechanism allows the technical side to be minimized. All doors original form(light arches for narrow passages to the utility room, high-height panels with transoms, as well as all bay windows) are made only individually, and the price for such an order will be significantly higher.
Materials
Various materials are used in the production of sliding doors.
Metal
Different variants Interior partitions for government and medical institutions are often made of aluminum or iron.
As a rule, this design does not look too heavy and has good strength characteristics. Aluminum and iron are highly resistant to external weather conditions. Aluminum partitions are often used for glazing loggias and balconies. The sound insulation properties of these materials are quite high, and if you use a good seal, it will ensure both heat retention and sound insulation at a high level.
The service life of aluminum partitions is 50 years or more. They may need a new cosmetic paint job over time.
Wooden
Wooden products or canvases from different solids will never go out of fashion, and a sliding structure made from natural materials will always look rich and stylish, especially in the living room or hall. Such models open up space for craftsmen to be creative in wood carving and creating different types doors: from solid frameless to models with figured glazing.
Natural wood is an environmentally friendly and durable material, provided it is carefully cared for.
However, sliding structures of this type are very heavy, so you should definitely remember that the fittings selected for them must be of the highest quality and with increased strength indicators.
Of course, if you plan to install wooden doors, it is important to properly care for them so that they do not darken or crack ahead of time due to temperature changes and sudden changes weather conditions. You should first consult with specialists about what care products wooden products should be equipped.
MDF
The most common and inexpensive material from which a good sliding structure can also be made is fine wood or MDF. In terms of environmental characteristics, it is not inferior to natural wood, and its surface can also be decorated with various patterns and applications.
The advantage of MDF panels is that, unlike wood, they weigh very little, and therefore there is no need to purchase expensive and reinforced fittings.
Of course, the service life of such doors is much shorter, but with careful operation, this option can become acceptable.
To give the panels additional beauty and create the effect of expanding the space, mirror inserts of various shapes and sizes can be embedded in them. It looks very beautiful and attractive, but it also requires a durable mechanism and reinforced fittings due to the fact that mirror inserts have additional weight. As for more simple models sliding doors, if desired, you can independently make an interior partition from plasterboard or veneer, sanding it “antique” or painting it in the desired color.
Colors
Thanks to modern technologies, the color scheme of any design, including sliding ones, has no strict restrictions. Depending on the material used, you can choose a product to suit every taste and color.
The main thing is that it is combined in color with the main elements of the interior, and the overall picture looks harmonious and holistic.
White color is relevant for aluminum partitions, often used in medical offices, but if it is used to paint sliding wood panels leading to the bedroom of a residential building, the effect will be very gentle and “homey”. Of course, if you plan to install panels white, it is important to make sure that the entire space around, from wallpaper to furniture, breathes lightness and romance.
Sliding structures wenge colors will always look massive and solemn, especially if the doorways are wide, and high windows and ceilings prevail in the room. This color is best used in large rooms where there are already large pieces of furniture designed in a classic style.
Styles
As you know, whether a door belongs to a particular style most often determines the nature of the material from which they are made.
- Massive blind panels made of natural wood dark shades can safely be attributed to "classics". Classic style, despite its severity and not always obvious affordability, will never go out of fashion and long years will delight its owners with the severity of its lines and sliding interior models that “adapt” to its elements.
- Discreet modern hi-tech style implies the use glass doors in combination with inexpensive polymers or metal. Also, eco-doors made of bamboo, upholstered in leather or leatherette, will organically fit into what is called modern trends.
- If you use such a universal and lightweight material like MDF, you can do it great option, seasoned V Mediterranean tones.
- Traditionally and for a very long time, Japan is considered the first country in which sliding doors were once invented, which is why there is a so-called "Japanese style room design, reminiscent of where such a convenient and functional invention came from. Sliding interior options in the Japanese style can be lattice, matte, decorated with intricate bright patterns in the form of mythological animals and even embroidery.
Design
As for modern design solutions, if the very first sliding models sometimes looked artisanal and primitive, now this is no longer the case, thanks to the development of modern production technologies and the bold and functional inventions of designers.
The style of the room must be determined before a door set with all the necessary fittings is purchased.
The possibility of individual order will always help you to decide on the best style and technical features, which will have to be taken into account during installation.
Anyone can be suitable for making classic interior doors. wood material- the question is how the owner of the premises would like to “complete” the doorways. If the area of the room allows, you can partially install conventional swing models, and in those places where space is limited, you can also install a sliding structure.
In large private homes, sliding models are most often installed in the kitchen. They are made of durable glass, which ensures ease of use and ease of maintenance. Glass models are also used in office spaces - for the same reason as in kitchens: ease of maintenance, practicality and, importantly, additional penetration of natural light - this is always necessary for employees in working conditions. Glass with a matte finish and simple patterns will decorate any room: from an office to home cooking, and the impact resistance of modern glass will provide such options with the maximum long term services.
A door with a mirror will not only visually increase the space of the room, but will also be the best solution problems if the room is small and it is not possible to install a separate mirror in it for one reason or another. Besides, large mirror takes up a lot of space, and a small one often does not bring much benefit if a person needs to see himself completely from head to toe.
It is in this situation that you can mount a large mirror panel in sliding sash, making sure to provide the necessary clearance so that mirror surface was not damaged or scratched by its constant movement.
Mirror inserts can also be used simply as decoration. For example, MDF panels make it possible to make the structure a little heavier without harming the supporting mechanism. For owners prone to mysticism and Mediterranean motifs, you can always offer stained glass design for the front fixed panel of wide three-leaf doors. Modern stained glass decorations are made of durable materials, they do not fade in the sun and do not make the structure heavier, and when made by qualified craftsmen, they sometimes look no worse than ancient ones.
Beautiful options for models in the interior of a living room
Of course, when it comes to installing doors in a large private house, problems rarely arise with the concepts of beauty and functionality. As for small spaces, options for installing sliding interior designs It is in this case that they seem to be most in demand among ordinary buyers.
If the “Khrushchev” has a recess in the form of a niche, the best option There will be doors that enter the niche on runners designed in accordance with the dimensions of the recess. When installing doors made of lightweight polycarbonate into a closet, a functional partition will be created with an insulating role assigned to it.
In addition, the “Khrushchev” can be decorated with a durable interior “accordion”, which will not take up much space, unlike a swing door, and the passage to the kitchen will always be free.
Various models Interior partitions, many of which can be made independently, will help to optimally organize the space of a children's room, in which both a boy and a girl can live at the same time. With the help of such a partition you will get two small but full bedrooms.
If a person lives in a one-room apartment, in which it is not possible to build a full-fledged dressing room with a place for changing clothes, a partition can also play a “saving” role, allocating a certain part of the room for this.
When living in a studio apartment combined with a kitchen, a high screen will become a universal divider that will not only prevent the spread of odors throughout the room, but will also hide dirty dishes and other unsightly things in the form of garbage and food waste from guests.
Thus, sliding interior doors can be installed not only in big houses and offices. Since now there is an excellent opportunity to manufacture and install them individually, such a convenient design can be fully adapted to the needs of economy class.
How to install sliding doors yourself, see the video below.
There are plenty of sliding doors to choose from for your apartment - this is evidenced by the photos that the Internet offers in variety. Whatever the tastes of the future owner, whatever amount he has, the chances of finding the ideal solution are very high. And individual production, which allows us to approach the needs of each client separately, opens up limitless possibilities. The range of large factories is rich in models:
- made of wood, aluminum, glass. Particularly elegant and versatile are the options containing large glass inserts or made entirely from translucent materials. The photo of such sliding interior doors in the apartment shows light canvases, like air or fog. They offer A New Look on spatial freedom and boundaries between rooms;
- designed to design openings or improve layouts. Armed with a structure on casters, you can carry out zoning of the territory without wasting time and effort. The role of partitions is played by large doors, or even entire three- and four-leaf systems, extending to the ceiling, running along the entire room;
- corresponding to various design trends, be it “English” classics, minimalism, Provence or even country.
The Academy company offers the best prices on all types of interior sliding doors to the apartment. In the production of products, Italian quality standards are taken into account and reliable and stylish mechanisms and accessories are used.
Which rooms should be equipped with canvases on rails?
Retractable models are successfully used:
- in hallways equipped with many openings. A small space can be unloaded and made freer and safer to move;
- in bathrooms and kitchens, which are given a minimum of space in standardized housing;
- over vast areas. You can buy sliding doors for a studio apartment or a large living room that needs segmentation. Due to its compactness and lightness, the design will help to divide the room while maintaining its original dimensions;
- in the organization of utility areas - various kinds of niches, pantries, wardrobes.
Systems on casters easily go anywhere. But in order to make the right choice, it is worth taking into account their low tightness. For example, when installing sliding doors in a one-room apartment to separate the common area from the bedroom, you need to understand that they are unlikely to protect you from noise and bustle. More reliable in this sensebuilt-in models , but their installation is quite complicated.
What should be the optimal product?
A structure intended to serve in a residential area must:
- have ease and comfort, because it is used by households of all ages;
- withstand intense daily stress;
- be made from mechanically and environmentally friendly safe materials;
- blend harmoniously into the interior, taking into account its style and purpose.
Photos of sliding doors in a one-room apartment will help you get acquainted with the range of products. You can select and purchase a product from Academy.
