Which company is the best front door? Torex entrance doors are first in the popular trust rating. Neman - reliable and safe doors

No room can be imagined without durable and beautiful door. And if we're talking about about an apartment, it must also be very durable, ensuring the protection of property owners and the safety of their property. Brand.guru offers its rating of hardy and durable entrance doors from the best manufacturers and at affordable prices.

The best entrance doors are metal models that can withstand heavy loads.

It is also important to have modern locks with unique secrets that are difficult to open with master keys.

To choose really good doors you need to pay attention to the following points:

1. The basis. No soft or thin metal, choose only high-strength steel, which additionally has good heat and noise insulation. These doors are very heavy. The thickness of the steel changes the cost of the product, optimal thickness a sheet of 2-3 mm is considered.
2. Finishing. Different materials can be used for design - plastic, MDF, powder coating, varnish, paint, wood. They have aesthetic and functional features.
3. Opening. You need to decide where the handle should be and which way the door will open. The direction can be internal, external, left, right.
4. Fire and moisture resistance. Metal entrance doors are affected by environment, which means their coating must be resistant to any influences.
5. Noise and heat insulation. For this, light but effective fillers are used, which affect the final cost of the product.
6. Locking mechanism. Locks must be reliable and durable; there are 13 burglary resistance classes.
7. Accessories. Cheap products quickly fail and have an unaesthetic appearance. It is important to choose the right strong chains, loops, eyes and handles.
8. Quality. When choosing steel entrance door models, give preference to manufacturers who provide a guarantee on their products, including fittings, trims, and leaves.
9. Service. To install the door, experts advise contacting experienced craftsmen.

There's plenty to choose from

Our rating of manufacturers will help you choose the best and strongest door for your apartment or house. Manufacturers themselves try to offer high-quality models in different price categories. However, as practice shows, especially in big cities, you should never skimp on this element of housing and security. The best high-strength entrance doors must fully meet all the requirements of domestic realities.

1. ASD

Doors from this manufacturer can be purchased for an average of 17 thousand rubles. However, the price can vary greatly depending on the configuration, materials and accessories used, product dimensions, and so on. The disadvantage of the door is that when ordering other, non-standard shades of panels, you will have to pay extra and wait another 2 to 4 weeks for your order.

Advantages of the model:

• laconic style;
• good quality/price ratio;
• durable and lightweight;
• provides reliable protection;
• possibility to choose the color of the panels;
• The thickness of the steel used is 1.5 mm, and the thickness of the blade is 50 mm.

Durable metal is used as the main material; there is an armored lining around the perimeter. Additionally there are two sealing circuits and a night valve.

Prices Entrance metal door Economy Asd:

2. BRAVO

The average price of popular models from this manufacturer is 13,100 thousand rubles. For this money you get a durable door, with high-quality fittings. The entire system will last a very long time due to its advantages:

• light door;
• powerful loops;
• high quality fittings;
• use of high quality steel;
• use of powder paint for exterior finishing.

Pretty good steel doors, but there are much better options.

If you live in a disadvantaged area, then a steel thickness of 1.5 mm will not be the best option.

And this is even taking into account the fact that the fabric is produced by pressing without welding. The inside is filled with a basalt slab.

Prices Entrance door Yoshkar P-09 Wenge BRAVO:

3. ProfMaster

The Moscow company ProfMaster has been working in the field of entrance doors production since 1998 and has managed to earn a good reputation, which is confirmed by numerous positive reviews from satisfied customers. It is known mainly for its “Nord” series, made using thermal break technology, which provides exceptional thermal insulation: the doors are designed for outdoor use, do not sweat, and do not freeze. However, among the entrance doors for the apartment there are also interesting models, both in terms of functional characteristics and visual features.

The key competitive advantage is the production of doors according to individual order. The buyer receives:

• freedom in choosing the thickness of steel, locks, finishing materials;
• the ability to produce fabric of any non-standard size;
• unique design project.

At the same time, prices remain quite affordable due to the absence of intermediaries. Production times vary from 3 days to 10 days depending on the complexity of the project. For those who don’t want to wait, the manufacturer’s website offers a selection of finished products.

Among the shortcomings, it should be noted that the company is more focused on the production of custom doors. If you need a specific door today, then this can become a problem, because it can only be made to order.

Prices Doors ProfMaster:

4. Guardian

On average, you can buy Guardian doors made of steel for 21 thousand rubles. The models of this manufacturer have many advantages, including the technologies used. Depending on the configuration of each model, its price may vary significantly. The main advantages of Guardian are:

• reinforcement of the canvas;
• use of high-strength fasteners;
• availability of quality and compliance certificates;
• robust and stable system.

For many, the disadvantage will be the high price of manufacturers' products, however, it is worth it. You receive a door that has the following characteristics:

• made from two cold-rolled steel sheets;
• anti-removal clamps and trapezoidal stiffeners are installed;
• mineral wool inside;
• two locks and two seals.

Good sound insulation performance, doors meet reliability class M1.

Prices Metal door Guardian series DS 2:

5. Elbor

Looking through the review of this model, I immediately want to note its strict and laconic design, sometimes even reminiscent of old solutions. But in some cases, the main thing is not design, but quality and durability. Elbor is a fairly good solution, and you can buy a door for an average of 15 thousand rubles.

The advantages of the product include:

• use of thick steel;
• high-quality finishing materials;
• several opening options;
• the presence of several locks;
• installed peephole.

For many, the disappointment will be the small selection of design solutions and rather outdated color options. But, you buy a door in which:

• 1.8 mm thick steel was used;
• oak interior trim;
• door frame 110 mm thick filled with basalt slab.

In addition, the product has three sealing contours, an armor plate and three durable hinges.

Prices for Elbor Doors:

6.TOREX

• modern and futuristic design;
• good selection of colors;
• use of different patterns;
• favorable prices;
• use of imported equipment and components.

The models of this brand were included in our rating as the most controversial and controversial. The reviews left by owners of the manufacturer's products are contradictory. Some say that there are enough problems with them, while others are completely satisfied with their purchase. According to the company, only high-quality materials are used.

Other characteristics:

• the thickness of steel sheets is 1.5-2 mm, and the thickness of the sheets is from 70 mm;
• wide choose width and height of the product, there are double-leaf models;
• For finishing it uses MDF and PVC.

Prices for TOREX Doors:

7. Outpost

The company's products are inexpensive models that can be purchased for an average of 8-9 thousand rubles. Naturally, they require a separate strength test, because for such an amount it is doubtful to purchase a quality product. Although the manufacturer guarantees:

• service maintenance;
• installation with guarantee;
• large selection of components;
• own distribution network.

The disadvantage of the product is that it a budget option with all that it implies: poor burglary resistance and sound insulation.

But in the package you get:

• two castles;
• standard product sizes;
• large selection of colors;
• modern design;
• reliable locking systems;
• seal contours;
• some handles with backlight system;
• automatic locking.

Prices Steel door Soyuz-51 Forpost:

8. Neman

In the rating of durable metal entrance doors they are not ranked last place. And all this is thanks to the thoughtful work and equipment of the models, however, you have to pay for it and on average it is more than 45 thousand rubles. For the money spent you get:

• high burglary resistance;
• individuality and thoughtfulness of each model;
• good reliability;
• product durability;
• use of modern equipment for the production of doors;
• high-precision and high-quality models;
• manufacturer's warranty;
• compliance with established standards.

Perhaps the only drawback of the products of the presented brand is the high price of the products. They are provided with:

• five protection classes;
• minimal gaps;
• high quality locks;
• anti-burglary systems;
• multilayer high-strength panels;
• overhead protective loops;
• armor plates.

Prices Entrance door Neman:

9. BECAME

Another option for inexpensive models that can be purchased for an average of 10 thousand rubles. but is it worth purchasing such a door? The manufacturer claims it’s worth it, because despite the fact that it budget models, it guarantees:

• quality products;
• hardy locks;
• conservatism and conciseness;
• large selection of design and color options;
• additional protection against burglary in the form of linings and hinge protection;
• high-quality and durable components.

Oddly enough, the disadvantage of the brand’s products is the price. It directly says that you can’t expect high-quality products. The burglary resistance and noise insulation indicators are not the best.

If we talk about technical characteristics, it is worth noting the presence of all standard sizes; the thickness of the canvas is 50 mm, and the thickness of the sheets is 1.5 mm.

Prices The front door STEEL:

10. Legrand

Doors from this manufacturer can be purchased for an average of 30 thousand rubles. The advantages of the brand's products outweigh the disadvantages. Among the main advantages it is worth noting:

• use of high quality steel and fittings;
• warranty for the products provided from the manufacturer;
• long service life of all parts, systems and elements;
• standard sizes;
• use of additional elements to increase security.

As in many others, quite expensive models, the main disadvantage of Legrand is their price. However, it is worth exploring General characteristics products and you might decide it's worth it.

• thickness of sheet metal - 1.5 mm, steel sheet - 50 mm;
• the presence of additional armor plates;
• two sealing circuits;
• night valve;
• laminated MDF, veneer;
• locks of different security classes;
• reinforcement of the lock and locking part (4 and 3 mm, respectively).

Prices Entrance doors Legrand:

The best modern metal doors cannot cost 10-15 thousand rubles. For the money, they may be beautiful and feel like rugged models, but they do have weak points. If you are willing to spend an order of magnitude more, you can provide your home with much greater security. If you want to install the best steel entrance doors to your apartment, then get ready to pay 50-70 thousand rubles. or more. But an armored door can fully protect you and your property.

Quite an unusual name for a door manufacturer, but it immediately attracts attention. The company positions itself as the most responsible player on the market, having its own production and modern system sales We have our own professional installers and follow-up services. The company has a wide distribution network and supplies its products to many regions of Russia. The latest equipment allows you to quickly introduce innovations and apply the latest developments in this area.

The manufacturer manufactures its products itself and distributes and provides service itself, which gives it advantages for more flexible work with clients of any level. The company's latest equipment allows us to minimize errors in the manufacture of external steel doors, thereby achieving high quality. All products are tested for strength and stability in all respects. For example, after painting, the strength of the powder coating is checked using a shot blasting complex from the Shtem company from Slovenia. The surface is fired with cast iron shot 0.5 cm in diameter, thereby testing the strength of the surface.

• Country of origin – Russia

One of the oldest enterprises on the Moscow market, which was founded more than 24 years ago and has gained a strong position in this area. The company is also known in many regions of Russia and is highly respected. The company's scope includes not only the manufacture and installation of steel entrance doors, but also the production of barbecues and accessories for them and more complex systems for audio and video access and electronic locks. The company's partners are such well-known world brands as Mottura, Cisa, Evva, Agnelli Porte, Legnoform and many others.

The company was founded in 1991 and has gone through a thorny path of formation. Already in 1993, the company was able to open its own assembly shop and since 1998 has full cycle production. The manufacturer is a participant in such well-known domestic exhibitions as MosBuild or SOCHI-BUILD 2009, where she showed the results of her activities. A professional, well-coordinated team of specialists allows STAL to confidently strengthen its position in the entrance door market and even reach the international level. In 2008, the company’s flag was raised above the high point Europe - Mount Elbrus, thereby declaring itself in the European space.

• Country of origin – Russia
• Company address: Moscow, Akademicheskaya metro station, 60th Anniversary of October Ave., 11a
• Manufacturer's website - http://www.dpz.ru

Over all the years of its existence, the BelKa company has proven itself only with the best side, releasing really high quality steel entrance doors. The manufacturer began its history in 1995 and gradually increased production rates. The company began with the production of metal simple doors and gates, but after three years it was able to develop to a level where it could fulfill large orders for the production of MDF-lined products. In 2006, a large-scale expansion of all production facilities took place, and the manufacturer reached the all-Russian level.

The company adapts quite flexibly to customer requirements and skillfully maneuvers among the pitfalls of the industry, competing with prominent door manufacturers in Russia. The company also produces bulletproof and other armored doors for maximum and hacks. Frame door leaf BelKa doors are made from a profile rectangular pipe measuring 40x25x2 mm and are additionally reinforced with stiffeners. The inside of the door is necessarily insulated with a special material.

• Country of origin – Russia
• Company address: Moscow, Yauzsky Boulevard, 13, building 3, office No. 2
• Manufacturer's website - http://www.bel-ka.ru

The company has been present on the domestic market of entrance doors for more than 20 years. The manufacturer produces custom doors and cooperates with the most famous European companies, such as MaMe Türendesign GmbH (Germany), Open Gallery (Israel), Wippro Türen- und Treppenwerk GmbH (Austria) and many others. Adopts their experience and produces a high-quality product for domestic manufacturers. Over the many years of existence, it has accumulated great experience and huge client base, which is constantly expanding, as is the manufacturer’s production capacity.

Features of the designs and direct fastening of the door to load-bearing walls is particularly robust fastening system, which allows you to achieve maximum reliability. The company can also offer locks of its own production Gerda Tytan ZW 6000 with unique properties involving more than 4 billion lock combinations. Some models have a system of 15 cylinder-type locking bolts. Star CX door models are used to protect military-strategic facilities, which indicates the high level of professionalism of the manufacturer.

• Country of origin – Russia
• Company address: St. Petersburg, Moskovsky Prospekt, 148
• Manufacturer's website - http://gerda-mlg.ru

Italian manufacturer Founded back in 1975, it is a leading company on the Italian market and is widely known in Europe, including Russia, where it has its own production facilities to satisfy the domestic market for entrance doors of any configuration. Manufacturer's products characterized by a modernized design th with the latest developments in this field introduced, which are suitable for all possible interiors. The doors have a wide selection of design solutions that will satisfy the most demanding client.

The production equipment has one special feature - it is produced exclusively for Dierre and has some internal features, which allows you to make entrance doors unique in their own way. Thanks to innovation and professional workers companies that undergo regular training in new skills are confidently expanding in the Russian market, increasing their share among other companies. The company produces annually 200 thousand doors, 110 thousand cassettes for sliding doors, 80 thousand anti-burglary windows and much more.

• Country of origin – Italy
• Company address: Moscow city, st. Studencheskaya, 42/3
• Manufacturer's website - http://dierre.ru

A fairly prominent manufacturer with a wide network of distributors and a production volume of 80 thousand units of entrance doors under the Forpost brand per year. Quite a wide demand for the company’s products is achieved thanks to powerful modern production lines maintained by professionals high level. The manufacturer's assortment is quite wide and allows you to satisfy a large number of customers. At the same time, development specialists are constantly searching for new design solutions and special structures that improve reliability and make doors stronger.

Among the advantages why you should choose doors from this particular manufacturer are: highlight environmental cleanliness all materials used, wide selection of models to be used in various conditions, the highest safety fittings from the world's leading brands, sound and thermal insulation, as well as affordable price and aesthetics. For people who want improved protection, the company offers reinforced doors with an iron sheet thickness of 2.2 mm, such doors will prevent any illegal entry into private property.

• Country of origin: Russia
• Company address: Moscow, Prospekt Mira, 124, building 9
• Manufacturer's website - http://forpost-dveri.ru

One of leading companies on the Russian market for the production of metal entrance doors. A wide range allows you to satisfy the needs of most customers, thanks to the large number of different different models different design solutions. A quick response to a client’s call and professional support of all work will allow the customer moral satisfaction from a job well done. The company treats all customers responsibly, be it a single retail customer or a large wholesale customer. An agreement is drawn up, which is an official document and guarantees high-quality and immediate completion of all work.

The client will especially like the fact that The warranty period for products and their installation is 5 years. This suggests that the quality of the doors and all door fittings is at the highest level. This is one of the best manufacturers of entrance doors, which will also interest you with its affordable prices for any product. The company is attractive in all respects to residents of Moscow and the region.

• Country of origin: Russia
• Company address: 424006, Russia, Republic of Mari-El, Yoshkar-Ola, st. Stroiteley, 95, building 102/103
• Manufacturer's website - http://guardian.ru

Another pretty one famous manufacturer on the Russian market of entrance doors, which has its own production and produces custom-made entrance doors. The peculiarity of the company is that it does not produce standard products of the same size, but works individually with each client. A measuring specialist comes to the client, takes measurements and then custom sizes the door is being made. If this is a wholesale client, then almost the same thing happens. Accurate measurements are taken or the client’s ready-made sizes are used.

Entrance doors are made from high quality metal using our own design solutions to create maximum strength and reliability. Fittings in the form of locks, hinges and other components are also selected individually. You can even install an electronic lock with fingerprint identification, incorporating the latest developments in electronics. The configuration of doors can also be different - these are arched, front, technical, vestibule and many other models.

• Country of origin – Russia
• Company address: Moscow, Mira Avenue, 102, bldg. 1.
• Manufacturer's website - http://www.dveri-optima.ru

Torex

Door manufacturer Torex has the most modern production facilities for the manufacture of entrance doors and not only. The company's factory quality indicator is very high and allows it to rapidly conquer the Russian market. The doors are so high quality that they will last at least 20 years, which is impressive. Although many domestic producers offer a warranty period of at least 5 years, Torex quality is even higher, thanks to the use of high-quality foreign materials.

Door reliability confirmed by GOST quality of the highest level M1. Which indicates reliable sound and thermal insulation and high strength. 25 years of experience gives the manufacturer the opportunity to flexibly adapt to market trends and switch to the production of current products. This is still possible thanks to foreign technologies with which all processing machines and production lines are equipped.

.

Guaranteed door quality for 20 years, which has been tested in practice for its quite rich history. The client can be sure that his home is a fortress, thanks to the highest reliability of all materials and construction, which ensures unsurpassed strength of the door. A wide selection of design solutions will help you choose the most suitable option for you.

• Country of origin – Russia
• Company address: St. Petersburg, Maly pr.VO, building 57, building 3
• Manufacturer's website - http://proem.spb.ru

The front door plays an important role in protecting the home from burglars, external noise and cold, and also serves as a decorative element in the apartment or on the facade of the house. When evaluating a product, it is important to take into account the thickness of the metal, internal filling and finishing materials, comparing all this with the cost. But in view large selection knowledge of the reputation of specific manufacturers will help set the direction of the search. It is better to choose entrance doors from a manufacturer that has the largest number of positive reviews from customers who have already tried their products, in combination with technical characteristics. The rating of manufacturers in Russia, divided into classes, will help with this.

The best manufacturers of economy class doors

To understand which company is better, you need to decide on the category and place of operation of the doors, because a model for a country house or a house will differ in cost and quality from a product intended for a cottage or penthouse apartment. Of course, one manufacturer may have doors in both the cheap and expensive segments, but here is a complete overview of most well-known companies, divided into categories so as not to get confused.

For summer houses and for technical purposes it is better to install entrance doors from the Russian Standard company, due to the very affordable price and acceptable quality of coating. The cost of models starts from 3,900 rubles, and the canvases have a design with two sheets of steel and a polymer powder coating that can withstand rain and snow. The thickness of the sash reaches 70 mm, which allows it to accommodate several sealing contours and hidden adjustable hinges.

Similar products are produced by the Forpost company, which is better to choose for technical needs or placement at the general entrance to the entrance, because the manufacturer also produces double doors. They will also fit into an apartment, provided the entrance is locked and insulated. The plant uses steel with a thickness of 1.25 mm on the canvas and 1.5 mm on the box, polymer coating, 3 sealing circuits and two different types of locks.

The best manufacturers of middle-class metal doors

The middle class has a wide range of uses. These can be apartments, houses, cottages, offices small companies. The best entrance door companies producing the most sought-after and popular category of goods in terms of price and quality ratio are:

• "Yoshkar Ola";
• "Bulldos";
• "Citalel";
• "Ratibor";
• "South".

For such companies, the initial cost of doors is 9,000-12,000 rubles, and the maximum reaches 30,000 rubles. For an apartment, it is better to buy an entrance door in the range of 10,000-15,000 rubles, which will have a thickness of an applied iron sheet of 1.2-1.5 mm, insulation made of polystyrene foam or polystyrene foam, high-quality powder coating, chrome fittings and external hinges with the ability to open 180 degrees. Armored adjustments must be installed on the locks, and anti-removal pins are installed on the side of the awnings. One part of the canvas is supplied decorative overlay made of MDF 6 mm thick, decorating the overall appearance.

For a private home, where burglars have more opportunities to make noise with tools, and the canvas is affected by precipitation, it is better to choose models from the above companies in the price category from 15,000 to 30,000 rubles, which have thick MDF linings with moisture protection, multi-layer filling with cork and mineral cotton wool, thick sheets up to 90 mm with several sealing contours, mortise armored linings.

The best manufacturers of luxury doors

Here, the cost of products starts from 15,000 rubles, and in some factories from 22,000 rubles, and can reach 40,000-50,000 rubles. The best manufacturers of metal entrance doors stand out for their expensive finishes, high vandal-proof characteristics and good insulating qualities. Here is a ranking of popular companies:

• "Groff"
• "Lex";
• "Zetta";
• "Door Continent"
• "Mastino";
• "Senator."

Such doors are suitable for an apartment, house, cottage, office arrangement, or at the entrance to a restaurant or hotel. The product has several sheets of steel 1.5-2 mm thick, 16 mm MDF panels, decorated with relief milling and mirrors or moldings, from 2 to 4 contours sealing gum, cylinder and lever locks of burglary resistance classes 3 and 4, armor plates and anti-removal pins. Companies use as insulation mineral wool or rigid polyurethane foam. The thickness of the canvas can reach 100 mm and weigh up to 180 kg, therefore it is equipped with 3 hinges on bearings.

The Reliable Doors company has in its assortment products from all the above-described manufacturers. We have a good understanding of which company's entrance doors are better, depending on the location of use and other technical conditions. To consult with a specialist or clarify additional parameters for a particular product, it is convenient to use feedback.

Buying an entrance door is a responsible step, not only because it forms the first impression of the apartment, but also because it concerns the safety of its residents. So that you do not make a mistake in your choice, we have compiled a rating of the best manufacturers of entrance doors.

Outpost

The Forpost brand unites products from different manufacturers, including Door Continent, Citadel, Fort, Bastion, Rubezh, Pandoor. Some people are confused that some of the doors are made in China, but this allows us to offer good quality at low prices. Due to the enormous popularity of the brand, they began to counterfeit it, so it would be a good idea to check the certificates when concluding a contract.

S-428
RUB 10,800


A-35
RUB 11,510
In general, the thickness of the canvas should be at least 1.5 mm, otherwise the door can be opened with an ordinary can opener. But 2 - 2.2 mm can be called the ideal thickness. After all, if you make the door wider, the door will become too heavy, and additional hinges will need to be installed. IN ordinary apartment There is no need for such doors.

Neman

The Neman company offers doors in a different price category. But they are made from high-alloy steel. Its advantages are strength and resistance to deformation. By the way, the company has more than once received patents for its own production technologies.

RUB 55,100

One of the most important parameters In addition to reliability, it is sound insulation. It is provided by MDF panels, which are installed inside the door leaf. Ideally, on both sides, and their thickness should be at least 10 mm.

Legrand

A manufacturer that can be classified as elite. This is expressed both in a stylish, thoughtful design, high quality, and in the rather high cost of the doors. But for exterior and interior decoration, you can choose not only laminated or veneered MDF, but also solid wood.

Much attention should be paid to the choice of locks. Truly reliable ones start from the third class of burglary resistance, but if there is no need to save money, then it is better to choose the fourth. As for manufacturers, Turkish and Italian companies have proven themselves well in this market.

Guardian

There is quite a wide range in prices for models from this manufacturer. But it is known primarily for its high-class entrance doors, which it distinguishes Fire safety. Another plus is that the buyer can choose all the components for any model.

Factor K MP

You can save on factors such as thermal insulation when choosing a door to an apartment. After all, it will lead to a heated entrance. This is worth emphasizing if you are looking at a door to a private house.

TOREX

The company has received quality awards more than once, so you can confidently trust this manufacturer. The same applies to design: specialists from Italy often help come up with new models.

By the way, we recommend paying attention to doors with a geometric pattern. The trend for futuristic motifs is just coming into fashion, which means it will be relevant for many years to come. Just don’t forget that in any decorative elements Dust may accumulate, but fingerprints and stains are more visible on a smooth canvas.

Bastion

You won’t exactly find budget options from this manufacturer, but you can find classic style and reliable mechanisms. In this case, you will have to choose from more than 500 models. Fun fact: Bastion doors use 12,000 tons of metal per year.

Optima OPT059

Optima OPT018

Returning to the topic of castles. It is important not only the burglary resistance class, but also that the two locks are of different types: suval and cylinder. Experts emphasize that this item should be one of the first when choosing. After all, most often criminals do not try to force the door down, but act by breaking the lock.

Became

A good, time-tested brand. When installing the door, a heavy-duty fastening is used - concreting. The model range is also pleasing: in addition to classic and modern models, it presents design developments that are somewhat reminiscent of details from fairy-tale palaces.

45 with Modern panels 35R with Crete finish and Sibu panel

RUR 54,936 RUB 55,760

In addition to the main functions, the door can also be equipped with additional ones. For example, closing a door without a lock, but simply lifting the handle up. Or by blocking the lock from the inside, when it will be impossible to open the door even with a key from the outside. You can even add lighting to the handle itself - so that when the light bulb in the entrance burns out, the keyhole will be illuminated.

• Elbor . This company operates under a funny slogan: “Get out, thief - I have Elbor.” And it has been on the market since 1976, so the experience looks very convincing.
• The door blocks of this manufacturer are reminiscent of Lego: the model that suits you can be assembled point by point: from the degree of secrecy to the finishing method.
• The company produces not only entrance doors, but also interior doors. By the way, you can read about which manufacturers you should pay attention to. The company also has a line of premium entrance doors under the brand Groff .
• Italian doors for true connoisseurs. They can be attributed to the next generation, because the company has developed models with a system remote control, in which a chip is used instead of a key.

It will not be possible to turn a house into an impregnable fortress without a reliable, strong and durable front door. Metal doors are considered ideal in almost all respects; they are significantly superior to their wooden counterparts in terms of protection and safety. However, the door is different - modern market so oversaturated various options , that you can find both flawless and one that can be easily cracked even by an inexperienced burglar. How to choose a metal entrance door so that it will provide you with a pleasing appearance and impeccable service? Let's dwell on the most important points that everyone should know before going to a store or specialized company.

Attention! As you read our material, you will understand that when choosing an entrance door there are a lot of nuances and they are all important. In turn, manufacturers are forced to sacrifice some parameters in order to make their product competitive in price for the mass consumer. In the case when you are not ready to compromise and are ready to pay for a high-quality door according to your optimal characteristics, then it is better to make a door to order directly from the manufacturer, where you can negotiate and write down all the future nuances in the contract.

No. 1. Design features of a metal door

The strength and reliability of a door depends to one degree or another on the characteristics of each of its constituent elements:

• door leaf - the main and largest part of the structure, consists of a frame, internal and external cladding, as well as stiffeners and;
• door frame;
• lock;
• loops;
• seal in one or more circuits;
• , and other accessories.

Door leaf made of sheet steel, which is obtained as a result of hot or cold rolling, on which the properties of the door largely depend:

• hot rolled steel is different dark color, but it is not visible under the decorative coating. It's relative cheap material, which is more susceptible to corrosion;
• cold rolled steel It will cost more, but in terms of performance it is the best option - the material is not afraid of any atmospheric influences.

The strength is also greatly influenced by the frame. The most reliable door will be the one in which the frame is made from a profile pipe with one seam. A less durable frame is made from four sections of hot-rolled profile pipe, interconnected. The most unreliable will be a frame in which each of the four segments is welded from two corners of equal length. Simply put, the fewer welds in the frame, the better, because each of them reduces resistance to mechanical loads. External part the door leaf should be made only from monolithic non-welded sheet, otherwise a blow with a medium-force sledgehammer will damage the integrity of the structure.

No. 2. Steel thickness

The most important aspect that needs to be clarified when choosing a door is the thickness of the steel sheet. This parameter may vary from 0.8 to 5.0 mm: the higher it is, the more reliable and durable the door will be. Along with the increase in safety, the price and weight increase, which is also important to take into account.

The scope of use of doors with different thicknesses of steel sheet is significantly different:

Some manufacturers use steel sheet only with outside, insisting that this is enough to create a durable structure and making the internal panel, for example, from MDF. To be completely confident in your own safety, it is better to choose a door with two steel sheets. On sale you can find options that reinforced with another additional sheet of steel, located between the main external and internal ones, is the ideal of strength. Such doors cost much more than their simpler counterparts, weigh more and will not be useful in all cases.

When choosing a metal door, it is recommended to pay special attention to castle zone, since when hacked it often takes most of the load. It’s great if this place is covered with a reinforcing sheet of steel or even - this is a huge plus in terms of reliability, even if the door is made of not very thick sheets of steel.

No. 3. Number of stiffeners

Between the outer steel sheet and the inner panel, no matter what it is made of, there must be stiffening ribs that are necessary to achieve maximum strength and resistance to mechanical stress. Stiffening ribs can be located vertically, horizontally or diagonally: it is important that they are located evenly throughout the entire structure, which is why it depends.

The minimum set of stiffeners is two vertical and one horizontal. It is better if there are more of them, but without going overboard, because they significantly increase the weight of the entire structure.

Stiffeners can be produced:

No. 4. Thermal insulation and sound insulation of a metal door

Metal is not the best insulator from cold and extraneous sounds, therefore, earlier, when metal doors had just begun to appear en masse in the domestic space, it was a common practice to install two at once: one metal to protect against unauthorized access, the second wooden to retain heat in the apartment. Today the situation has changed significantly: although a metal door has cold bridges (this is a frame and stiffeners), it can be self-defense from drafts, odors and cold.

High heat and sound insulation characteristics are achieved through the following elements:

Thermal insulation material is inserted between the frame and the stiffeners, filling the entire space between the outer and inner sheets. More often In the production of steel doors the following insulation materials are used:

• mineral wool- the most common option. The material has excellent sound-proofing and noise-absorbing properties, retains heat, does not burn and does not emit harmful substances, however, it is prone to subsidence, so it may require additional sheathing;
  
• has excellent heat and sound insulation properties, is durable, resistant to changes in temperature and humidity, but is easily flammable and costs more than mineral wool;
• – one of the cheapest options. The material retains sounds and heat well, but is easily flammable, and the gaps between the foam and the stiffeners will need to be filled;
  
• penoplex in many ways resembles mineral wool, but is slightly inferior to it in fire resistance;
• foam rubber and synthetic winterizer are used infrequently, since to achieve more or less acceptable insulating qualities a layer of 10 cm is required;
• paper and pressed cardboard- good insulators, characterized by low cost and light weight, but inferior in moisture resistance to other materials.

It is important that the manufacturer also fills the internal cavities of the metal profiles with insulation, otherwise there is no need to talk about high thermal insulation qualities. It is not difficult to check this - just tap the surface with a metal object: a dull sound indicates that the insulation is of high quality.

No. 5. External and internal finishing of a metal door

The steel sheets of the door leaf need decoration. When choosing interior finishing It’s worth starting only from personal preferences and the nuances of arrangement. Exterior finishing must be resistant to changes in humidity, precipitation and sun rays, if the door leads to the street, and withstand mechanical stress if you have pets. In the case where the door leads to a vestibule or entrance, there are no special requirements for its external decor.

The most popular finishing options:

• powder coating involves applying special paints to the surface, which, under the influence high temperature form an anti-vandal film. There are many shades and types of coating, so there will be plenty to choose from. The main advantages include excellent performance, resistance to any weather conditions and low price of the coating. Doors that lead from the street to the room, it is recommended to coat it with powder coating on both sides, without using wood and materials made from its fibers, so that changes in humidity and temperature do not force frequent repairs;
  
• solid wood– the most expensive, environmentally friendly and beautiful way finishing of the door leaf. Using painting and carving, you can create a real work of art. In addition, the tree will serve as an additional heat insulator;
• made from wood chips, have a thickness of 7-20 mm, covered with paint, a film with a pattern or a thin cut of wood valuable species. Such panels allow you to decorate the door in any way you like, they are not cheap, and the price range depending on the type of decorative coating is decent. Another advantage is good heat and sound insulation qualities;
  
• vinyl leather– once the most popular material for decorative door decoration. Can be of any color, imitates the structure of natural leather well, inexpensive, but not durable enough;
• – a budget option for finishing doors, there is a wide choice, they are easy to care for, but their durability is low;
• lamination with PVC film allows you to give the door any pattern, imitate leather or wood. The material is cheap, but short-lived, looks rustic;
• painting and varnishing can even be done independently, but the stability of such finishing is low, as is the price.

In principle, the possible finishing options for the door leaf are not limited to these materials. Recently it has become popular inner part decorate: this expands the space and allows, if it is not large in size.

No. 6. Attention to hinges

When it comes to choosing an entrance door, there are no details. The canvas can be three times reliable, and the lock can be cunning and complex, but without good hinges, the apartment will still be easy prey for a burglar.

Today, metal doors are installed these types of loops:

As for the quantity, for a sheet weighing 70 kg (the most common option with a steel thickness of 3 mm) two loops are enough. If the door weighs more or is intended for active use with opening/closing more than 50 times a day, then it is better to install 3-4 hinges. For massive doors hinges are selected with support bearings, which will greatly facilitate the process of opening the leaf and avoid squeaks.

No. 7. Features of choosing a lock for a metal door

The front door must be reliably protected not only from “rude” break-ins with a gun, autogen or sledgehammer, but also from attempts at “intelligent” intrusion. Of course, if you choose a door for country house, where they are infrequently visited, then the strength of the structure should be given equal attention, but for an apartment in apartment building the cunning of the lock is even more important, because it is unlikely that the noise from forceful methods the opening will go unnoticed by the neighbors. However, there is no lock that cannot be opened, especially an experienced thief, so the task comes down to choose a lock that will take as long as possible to open: This will increase the chance that someone will notice the attacker, or he will give up and leave, risking being caught red-handed.

Types of locks for entrance doors:

The ideal pair is level and cylinder locks, and they must be placed at a distance of 25-35 cm from each other. For your front door, you should choose only mortise locks, preferably 3 or 4 security classes, relying on products from reliable manufacturers. Remember that any lock can be opened, so if an apartment or house can attract “qualified” ones, it is better to install an additional lock.

No. 8. Door security classes

Like locks, entrance doors are divided into classes according to the level of safety and security:

No. 9. Entrance metal door size

The front door, ideally, should be made for a specific opening, and not the opening to be modified under a certain door. Responsible large companies offer their clients a comprehensive service, from measurement to installation, and during production they take into account the individual parameters of the doorway, but such pleasure will cost more than using a standard door.

It is advisable that the door width be more than 90 cm, otherwise large pieces of furniture will be difficult to bring into the room. The design can consist of one leaf, two, or be one and a half – if the opening is wide, then one leaf may not be enough.

By opening method doors can be right or left, external or internal. From a point of view, it is better when the door opens into the room, but this design makes it easier for thieves to gain access to the apartment, because they can squeeze out the door with a 5-ton jack.

No. 10. Manufacturers of metal entrance doors

The only thing you have to do is protect the house quality door. Trusting your home to products from dubious manufacturers means making your apartment vulnerable, and insignificant savings when buying a door can result in dire consequences. At the moment, the largest and most proven are:

• "Elbor" is a domestic company founded in 1993. Today it is the largest enterprise in the sector in the country, has a developed dealer network, and provides warranty service. Entrance doors are presented in different price categories, 3 and 4 security classes, choice decorative panels wide, fittings and components of our own production;
• "ProfMaster"- a small, relative to other well-known competitors from the list, trading and manufacturing enterprise. The company has been operating since 1998 and is known to consumers thanks to its popular street doors series "Nord". A special feature of the company is that it is aimed at individual production of doors to customer order. Here they can make almost any entrance door at the customer’s request, which is not what you should expect from large manufacturers who produce doors on a conveyor belt strictly in accordance with their requirements. model range. The company operates in the Moscow market, but some individual products are supplied directly to customers in neighboring regions by transport company.
• "The Guardian" is a large holding operating since 1994. Includes several companies different areas activities, incl. JSC "Portal", specializing in the production of doors. The company has representative offices in all regions of the country and in the near abroad; doors are produced in standard and non-standard sizes, in dozens different designs, weighing from 50 to 140 kg, 3 and 4 protection classes. Locks and fittings of our own and European production;
• "Granite Doors" does not offer the widest range of doors, but they all have the highest burglary protection. Warranty – 10 years;
• "Torex"- This is a wide range of doors of different prices, degrees of protection and design. Choose suitable model Anyone can; the warranty period depends on the specific model;
• "Bastion" is a domestic company that, from the very beginning of its activities (1997), set a course for the production of affordable doors. Today, the assortment includes designs with different thicknesses, locks and fittings from different manufacturers;
  
• Oplot company was the first to produce a bimetallic door, in which there is an additional sheet of metal between the two main sheets of metal. Mineral wool and polyurethane foam are used as insulation, locks are from the best manufacturers, the range includes almost a hundred different models. The prices are not the lowest, but the reliability is worth it;
• Dierre is an Italian company known for its advanced developments in the field of door security. At the moment, the manufacturer is working on creating;
• Gardesa is an Italian company with several representative offices in Russia. The quality and price are high, the manufacturer uses locks from the best Italian companies, which are developed for him on an individual order;
• Galant and Novak- Polish companies offering good doors at reasonable prices, but domestic analogues are not inferior to them in quality.

Finally

When choosing a metal entrance door, also pay attention to quality of fittings: it’s a shame if it falls apart in a year or spoils appearance doors. The eyelet, handles and chains must be functional, practical and reliable. Always put reliability first, not aesthetic qualities.