A folding canopy is incredibly popular among tourists and summer residents, because if you think about it, there is nothing better for a summer house. The “summer season” has opened, we assembled the canopy and are using it for our own pleasure, the summer season has closed. The collapsible canopy can be dismantled and stored in a safe place for the whole winter. We will talk about the pros and cons of such canopies, their varieties, manufacturing and assembly features in the article.
Types of prefabricated canopies
Before you start talking about prefabricated and dismountable canopies for a summer house, private home ownership, or recreation, you need to decide on the criteria for prefabrication. About what we're talking about? In principle, any canopy can be dismantled if desired and heavy equipment is available, but not every canopy can be put back together later. However, the very possibility of disassembling and assembling a canopy does not classify it as prefabricated or foldable. A folding canopy can be assembled and disassembled by the average person without special knowledge or specific tools.
If the canopy has problems, has very heavy elements, permanently fixed supports, it cannot be considered collapsible. Taking into account the above, let's talk about the types of prefabricated canopies. And let's start with ready-made, factory-made canopies.
The list of examples can be continued endlessly, because the range of such canopies on the market is huge. For the most part (approximately 70%), prefabricated canopies have a tent roof; you can read more about tent canopies in the article. Tent roofing is lightweight and quite easy to handle, which is why it often becomes the basis of a collapsible canopy.
Important! If you are thinking of purchasing a ready-made collapsible awning, keep in mind that sellers call such products differently, for example, tent garage or tent tent.
In addition to collapsible awnings, there are prefabricated structures with a roof made of cellular polycarbonate. If the need arises to remove the roof and dismantle the frame of such a canopy, this can be done very simply. The frame is disassembled into separate small parts and folded into a special bag, and the roof is disassembled into small polycarbonate segments, each segment is rolled into a tube and placed one inside the other.
The situation with homemade collapsible rain awnings is approximately the same. They are based on lightweight materials that can be compactly folded when disassembled, such as steel tubes and corners, fabric or polycarbonate.
How and from what are they made?
Collapsible canopies have a lot in common. They may differ in the material of manufacture, the shape of the roof, the design of the frame, but still it is very difficult to confuse a prefabricated canopy with a stationary one. The collapsible canopy features:
- prefabricated frame, which must consist of many small fragments;
- very light and durable design;
- compact folding roof.
Note! There are not many materials that meet such stringent requirements, mainly polycarbonate, fabric and metal profiles.
Meets stringent requirements for lightness and strength metal corners, tubes, ties. They are most often used in the manufacture of the frame of a collapsible canopy. For example, a canopy for a summer cafe of the “Marquise” type has several vertical supports consisting of metal tubes and a roof frame consisting of tubular segments. The roof of the Marquise canopy is made of fabric; a special “breathable” but waterproof fabric is used on the roof, which will protect you from rain and midday heat.
To make the Marquise canopy, steel tubes for the supports are cut into several parts, and then steel ties are used to assemble them together. Many will say that an all-metal welded structure is more reliable and you can’t argue with that. But on the other hand, if the collapsible frame of the canopy can withstand strong winds and rain, while having a bunch of other advantages, why do we need a welded structure at all.
When making the frame of a collapsible canopy, quite a lot of ties are used. One structure can have up to hundreds of connections, and each connection is securely fastened with a tie. A stiffening rib is created, making the structure quite durable.
The roof of a collapsible canopy is made of tarpaulin, awning fabric, or cellular polycarbonate. Fabric roofs are made integral, securing them to the frame using carabiners and other special fasteners. The panels are sheathed along the edges, inserting steel fastening rings between the seams.
The polycarbonate canopy roof is a prefabricated structure consisting of several sheets fastened together. At the end of each sheet there is a special fastener that connects all the sheets to each other and attaches them to the frame of the collapsible canopy.
How to assemble a canopy with your own hands?
If you get your hands on an excellent prefabricated canopy, and the task is to assemble it, then you need to perform a certain series of actions, which cannot be avoided when assembling any canopy structure. Be it a simple small country canopy for protection from rain or a large canopy for a summer cafe. The procedure is approximately the same. 
- Choose a flat, stable and preferably solid area.
- We lay out all the elements of the frame and make sure that everything necessary is available.
- We mount the supports by connecting the segments to each other, not forgetting about the thrust bearings (a simple country canopy can have 4 supports, while large canopy for a summer cafe there can be 12 or more supports).
- We connect and tighten the longitudinal segments of the frame.
- We connect and tighten the transverse segments of the frame.
- We put together and carefully tighten the parts of the roof.
- We fasten the thrust bearings to the ground.
- Next, we stretch the tent or polycarbonate roof and secure it.
If you are assembling a wall-mounted structure rather than a free-standing one, you will also have to additionally install the side fastenings of the frame to the wall by drilling the appropriate holes and screwing fasteners into them.
For your information! At the end summer season and according to the operating time of the street cafe, side wall mounts you can leave it so that later, in next year, installation of the canopy was even easier.
In conclusion, we note that currently assembled awnings, in comparison with other types of awnings, are the most popular among consumers. Perhaps thanks to this, manufacturers offer a wide range of such canopies: light, durable, easy to dismantle and relatively inexpensive!
We offer our Clients high-quality products: Awnings (made in Germany, Poland, France).Today we have best price for awnings of this quality. You can check.
Horizontal awnings - This perfect option for small summer areas in the form of small sidewalk cafes.
They may also be:
- open type. This is the simplest and most accessible design; it consists of a shaft on which a fabric canopy is wound. Shaft to protect its operating mechanism from impact open water and excess moisture, installed under a small hanging canopy or niche;
- closed awning. Its working mechanism, together with the drum, is located in a weatherproof case. Thanks to this design, it can be mounted on the wall of the house directly under open air, without fear that it will get wet and fail.
Why are our awnings so good?
- these are high quality massive aluminum profiles(made with the expectation of RF wind loads)
- special durable fabric(a large assortment of colors, which you can view in our office or from a technologist. The most important thing is to pay attention to the QUALITY of the fabric: strength, water resistance!!!)
- reliable automatic system control system.
You can view samples in our office and personally try out the ease of control: both manual and automatic.
Price
- Dimensions
- Model
- Opening method (manual or automatic)
- Installation location (wall or ceiling)
- Color of the canvas (does not affect the price))
Our company has awnings (entirely made in Germany!!!), if the required awning or the required color is not available, delivery of your model will take 7 - 15 working days.
Beware of buying cheap awnings (most often made in China). They are completely unadapted to our wind loads. They have a very weak design made of thinner metal (due to which the price is lower) and, as a result, they break very quickly.
SPECIAL OFFERS FOR DEALERS.
RETRACTABLE awnings - the most popular
|
: The most popular awnings for country houses. Awnings are elegant retractable structures in the form of lightweight canopies for protection from the sun and rain, placed above the windows or entrance. The design depends on the type of product, but is usually a mechanism consisting of a shaft, fabric that is wound around the shaft, folding arms or guides.
When folded, the awning, which is attached to the wall or ceiling, is almost invisible. Completely closing the windows from sun rays, awnings do not prevent air from entering the room. They are very easy to operate. Built-in smart sensors will monitor their safe operation depending on the weather and time of day. Also, the intelligent system can be configured so that the awning unfolds independently in the morning, and in the evening or in bad weather it folds up against the wall of the house
Awnings LINE (balcony)
|
: model of awnings on straight guides. Used for decorating balconies, entrance groups, verandas, etc. Very beautiful design. Behind the external simplicity of the design lies the strength and style of aluminum guides. The fabric is also wound into a roll.
A secret: the majority of clients who have visited our office and seen it with their own eyes choose this model.
For cafes, restaurants: applying any image to both the awning and the shuttlecock.
Designers believe that the LINE Marquise is ideal to use as an ensemble on a large country house. All, in one color, are installed on windows and balconies of the house to create a cozy atmosphere of sun protection in sunny weather.
FACADE awnings (Marquisoletta)
|
- are functional and elegant sun protection products for vertical facades and vertical glazed surfaces.
Facade sun protection systems are mounted directly on the facade of the building and give it a stylish and respectable look.
The big advantage of façade sun protection systems is their wide range of applications: from light walls summer gazebo up to more complex options, for example, the original vertically inclined ones, which, while covering the window completely from the sun's rays, do not prevent the penetration of fresh air.
Large glass surfaces - from a window in your home to a store window - are the areas of application for façade sun protection systems.
A luxury option for the design of your home with such awnings. Very stylish option. See also . Favorite model of designers.
Photos of our works
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
 |
 |
Awning canopies allow you to effectively hide your car from the scorching rays of the sun and precipitation, while they are inexpensive and can be installed without any problems with your own hands. It’s no wonder that awnings are the most popular among summer residents and tourists. Awnings and awnings made of awning fabric do not allow water to pass through, they are light and durable - just right for a car. Let's talk about them in more detail.
Classification of fabric canopies
Carports designed for cars can look different. Experts conditionally distinguish three groups of such awnings for canopies, which differ from each other in appearance quite significantly.
For your information! Canopies made from tent fabric “Tent” and “Garage” are used not only for cars. For a summer cottage, a fabric canopy can be indispensable, turning into a small house or shed.
Any of the above canopies made of awning fabric can either be purchased or made by yourself. In the first case, you save time and effort, but spend approximately twice as much more money, in the second case, you save money, but bother with making the frame and sewing the roof.
What does it take to make a canopy?
When preparing for the job of making a carport, there are three things you should remember: simple rules. Following these rules will allow you to create a beautiful canopy that you will be proud of.
- For the frame and roof of the canopy, select only light and durable materials.
- Make the canopy frame collapsible so that it can be easily dismantled and transported from place to place.
- Make the canopy fastenings as secure as possible so that they better resist windage in strong winds.
First, let's select everything necessary materials. First, we need an awning. You will have to buy it by the meter in a specialized point of sale, sheathe and insert special fastening rings.
Calculate the size of the awning in advance based on the design and expected size of the roof. Standard size roof canopy for a car of the “Marquise” type 3 x 6.2 x 3 meters. For the “Tent” and “Garage” canopies, the roof size will be almost twice as large.
Secondly, we will need materials for the frame, namely strong tubes with a stainless steel coating, jumpers and corners for them, and fasteners to strengthen the structure. Typically, 35 mm steel tubes are taken, made of stainless steel or coated with stainless steel. Corners and jumpers are made from metal rods welded together, in which holes for fastening elements must be drilled in advance. The same holes are drilled in the tubes.
Thirdly, thrust bearings will be required in order to firmly secure the garden canopy on hard or soft ground. For them we will take 6 pieces of reinforcement 40 cm long and six steel rings with a diameter of 40 mm.
Important! In addition to the above materials, we will need steel carabiners for reliable fastening of the tent roof to the frame and steel rings sewn around the perimeter of the tent.
It is very difficult to judge the quantity of materials. Everything will depend on what size the canopy will be, what design it will be, whether it will be adjacent to the building or not, and much more. For example, when manufacturing a tent canopy for the Marquise dacha, our specialists spent 26.5 meters of 35 mm steel tubes, used a piece of awning 3 x 6.5 x 3 meters, 20 lintels, 6 thrust bearings and 56 fastening elements (in the form of bolts, nuts and washers), 32 carabiners and 32 rings.
Now let's say a few words about tools. When assembling a finished structure, you need a minimum of tools, wrench for fastenings and a hammer to drive the bearings into the ground. Making a frame and sewing a roof is another matter; for this you will need:
We assemble the awning structure with our own hands
When all the materials and tools are prepared, you can begin to manufacture and assemble an awning canopy for your summer cottage. By approaching the issue of making a canopy scrupulously, you have good chance create a strong and well-fitted structure, where each element will be in its place. In this case, it will be quite easy to properly tension and then, if necessary, correctly dismantle the awning along with the frame.
Prepare properly workplace, gather together everything you need and let’s start making the frame of a canopy for a summer house and a car. The procedure is as follows.
- We take a grinder and cut metal tubes according to the dimensions that you determined in the drawing for the supports. For example, we will have 6 supports of 1 m 90 cm each.
- Next, we cut metal tubes for the longitudinal and transverse crossbars. If there are 6 supports, we will have 4 longitudinal crossbars, consisting of 8 pipe sections of 1.5 meters each, and three transverse beams, each consisting of two sections of 1.5 meters each.
- Next we cut the tubes into gable roof. We will need 6 pieces of tube, 1.7 meters each, for the roof and 6 meters of tube, divided into 4 parts for the ridge.
- Finishing the work with the angle grinder, we need to cut 12 pieces of pipe, 1.5 meters each, for the base of the canopy in order to provide the structure with the necessary stiffening rib.
Note! At each end of each pipe section, it is necessary to drill two holes, placing them lengthwise, 2 cm from each other. The diameter of the hole should be slightly larger than the diameter of the prepared mounting bolts.
The tented canopy for the dacha is ready. You can disassemble it, load it into a car and take it to the country. When disassembled, our canopy will weigh not much more than 50 kg. Just right for transportation by car.
To summarize, we note that a carport covered with a tent roof is a very simple, lightweight and inexpensive design that anyone can afford. There is no limit to the functionality of such a canopy. It can be used for its intended purpose, covering the car during a trip and living in the country, it can be assembled during a camping trip big company, creating a collective place for overnight stays and gatherings in bad weather. In general, you can use collapsible design as your imagination will tell you, as long as it’s useful!
We will send the material to you by e-mail
Canopies and awnings for terraces and verandas are installed on the front sides of buildings. This special devices that protect the room from sunlight. This design allows you to reduce the temperature in the main room by several degrees during hot periods. A variety of awnings are created mainly from soft materials, which are mounted to the frame base. They can be folded. Sheds most often have a stationary device and are made of materials such as polycarbonate or metal tiles.
Awnings help create a cozy atmosphere in the home
The use of awnings and awnings for terraces and verandas has a wide range of applications. They are necessary in the following cases:
Such models can be open or closed. Open models consist of a shaft along which the fabric is distributed. Closed products have a housing that protects from bad weather conditions.
Fabric awnings have the following advantages:
- the sun's rays do not penetrate into the room and also do not heat the glass unit.
- provide protection for furniture from fading under the influence of ultraviolet radiation.
- creation of additional shaded area.
- protection from wind and rain.
The products are light and beautiful. The frame elements are made from lightweight tubes.
Helpful information! To extend the life of the product, it is recommended that it be removed during very bad weather conditions.
Related article:
How to choose the right material?
To make an awning for a terrace, you need to select quality material. Acrylic fabrics are most often used. Such matter has the following properties:
- structural strength;
- excellent water-repellent properties;
- resistance to sunlight.
For country buildings, plain and light shades are used. You can also choose fabrics with stripes or printed patterns. The texture of the fabric matters. The strength of the canopy depends on the material frame system. It is better to use hollow aluminum pipes. Such materials will help prevent corrosion. When making an awning you will need tubes, folding mechanisms and an awning made of non-fading material.
Helpful information! It is recommended to clean fabrics with a dry brush. For this purpose, a weak soap solution is used, and in case of severe contamination.
Types of awnings and awnings for terraces
The dimensions of the awnings depend on the dimensions window openings, verandas or terraces. Such models differ from canopies in the following parameters:
- one side of the awning is attached to the wall of the house;
- the structure folds without general dismantling;
- can be equipped with an automatic folding mechanism.
Awnings and patio awnings can be equipped with push-button switches or devices with radio signals. The folding mechanism can be manual or automatic. The following types of products are distinguished:
- retractable ones can cover most of the area. Such a system can develop into winter time. This universal device, which protects from sunlight and precipitation;
- The dome shape of the canopy looks unusual. Such models are equipped with plastic guides;
- display products are often used for balconies. Differ in variety color palette. It is easy to install;
- vertical products are made from durable material. They are practical. The length of the canvas can be adjusted;
- horizontal models are used for large-scale areas;
- sectional models are suitable for areas with large gusts of wind. Such a system is based on stable columns;
- pergola models are two installations combined in one: retractable and vertical. When creating, a wall frame and awning fabric are used. Suitable for arranging loggias and verandas.
Options for verandas and terraces
All hanging structures mounted on a folding frame. In this case, the mechanism is mounted to the walls next to balconies, windows or terraces. The frame is made with a folding or sliding mechanism, which allows you to create required parameters shading. Awnings are also classified according to the way they are folded. Vertical products are laid out in two ways, like a fan and an accordion. The first uses special rods that rotate at one point. When assembled into an accordion, the twigs are strung on strips with different directions.
For your information! Designs with a manual mechanism are wound from top to bottom.
Related article:
Video: how to choose the right awnings
Awning designs
Awnings have different design features. The most simple option is considered a straight awning. It is used as a standard flat canopy and also protects the room from sunlight. A similar awning is placed above a door or window. The canopy folds easily and when folded looks like a roller shutter. An interesting option considered to be a roll-lever model. Its width can be more than 10 m. Using such a system, you can quickly register dining area. The design is equipped with a special mechanism that resembles two bending elbows. The fabric is straightened under the influence of special springs. The design also includes a shaft on which the material is wound. The opening is carried out due to the rotation of the shaft.
The pergola structure creates excellent shade. It is equipped with racks that allow you to mount vertical fencing. The rigidity of such a structure does not allow deformation to occur under wind load.
Bucket awnings use special connection systems and profiles. The arches used may have different shapes.
Helpful information! It is worth contacting specialists if necessary repair work on the wall where the device is located. Also, if the mechanism fails, you should stop using the canopy and contact a specialist.
What are the options for controlling an awning?
Awnings and awnings for terraces, photos of which are presented in this review, have various control mechanisms. The following control devices are worth considering:
- lever - roll mechanisms are equipped with brackets. To open the canopy you need to turn a special drum. At the same time, the brackets tension the material. This device is called a worm;
- The functionality of the awnings is ensured by an automatic belt drive. The structure folds when the electric motor is running;
- The basket folding mechanism is made of several arcs through which a special cord is passed. When the cord is loosened, the structure opens;
- Roll-lever folding options include awnings. It is used for long structures.
Helpful information! The use of automation in sheds allows you to regulate the assembly process using buttons, and also provides the ability to control several devices at once.
How to properly care for the structure?
Basic care is required for the fabric of the structure. Should not be used for of this material chemicals, which are intended for washing floors and dishes. Aggressive agents can damage the surface of the product. The following substances are used to clean the structure:
- soft cloth or special sponge soaked in warm water will help remove water stains;
- greasy stains can be removed with a soap solution;
- use a vacuum cleaner to remove large particles of debris;
- A soft brush and a little water pressure will help remove stubborn dirt.
Important information! With each cleaning, the material's resistance to ultraviolet radiation decreases. To restore sun protection properties it is used special remedy which is applied to the surface.
Article
An awning or retractable canopy is a folding sun protection structure for protection from the bright sun.
A canvas of dyed fabric is stretched between the parts metal frame, shielding the area or room from direct scorching rays. During cloudy inclement weather, the canopy can be easily and quickly rolled up.
What are retractable awnings?
Sun protection structures are used on terraces, summer cafes, open areas, balconies, and windows.
Automatic visors unfold when necessary, protect from ultraviolet rays, and create comfortable conditions. Made from acrylic fabric. The dense awning fabric is reliable, safe, and wear-resistant. The design is controlled using an electric motor or mechanical levers.
Types of retractable awnings
- Cassette. A sunscreen that is strong, durable and reliable. It has a casing to protect the awning fabric, which extends its service life. Used as sun protection for terraces of summer establishments and country houses.
- Open type. The operating principle is the same as that of a cassette awning. Doesn't have protective casing. Therefore it costs less and lasts less.
- Double-sided. Awnings on their own metal supports. They consist of two awning canvases, a frame, fasteners, and control elements. Used on terraces and open areas.
- Display cases. Fabric visor on metal structure. Simple, inexpensive, practical option. Used in summer restaurants, windows of shops, houses. Withstands rain.
- Pergola.
- Double-sided.
- Dome.
- Models for winter garden.
All described models can be found in the catalog above.
Retractable awnings for terraces
Terrace – open area, a common option for using awnings. The place is protected from ultraviolet radiation and creates comfortable conditions. They buy cassette, double-sided and open type awnings.
Sun protection structures for cafes
Summer cafes are common establishments. When outdoors, they need a canopy. It will protect from the sun, create comfortable conditions for resting and eating. Cassette, double-sided and open-type structures are installed in the cafe. Beautiful, practical, inexpensive, safe.
Buy retractable awnings in Moscow
The moving parts of modern retractable awnings are precise and reliable, resistant to wind loads. In addition to the canopy, many options are offered: remote control remote control, sun and wind sensors, built-in lighting and much more.
Synthetic fabric is durable, does not rot, does not become moldy and does not fade in the sun. Cassette awnings additionally have a casing to protect the rolled fabric.
Retractable awnings not only protect from the sun, but are also an element of style and decoration of the outdoor environment. At your disposal are extensive catalogs of fabric patterns and colors, and the metal part of the awning can be painted in any tone according to the German RAL color standard.
From our company in Moscow you can buy retractable awnings with delivery for cafes, restaurants, terraces, balconies, windows, and showcases inexpensively. Short time manufacturing, choice of fabric shades for the interior. Installation on any facade, Italian, Spanish, German components, low prices.
Retractable awnings for balconies, shop windows, cafes, restaurants, country house– a sun protection structure that absorbs ultraviolet radiation, creates comfortable conditions, and becomes part of the design of the complex.
Advantages of retractable awnings
The advantages of the models are especially appreciated by owners of country houses. Even in the hottest summer it is more pleasant to sit in the shade patio than to escape the heat inside a stuffy room.
Spending more time on fresh air, you will maintain your health and save energy: after all, when you are outside, you do not need to turn on the air conditioner.
If you live in an apartment and your windows and balcony are on sunny side, vertical awnings will help regulate lighting. For the windows of low-rise buildings, small vertically folding awnings are suitable.
Owners of salons, restaurants and entertainment businesses use it in the design of facades, loggias and summer areas. The choice of designs is very diverse: relatively simple budget awnings of an open type, elegant dome (basket) awnings, double-sided awnings with extensive coverage, pergola awnings for glass ceilings, display awnings.
Special awnings for the winter garden will not provide ornamental plants fade under the scorching sun, will help create a cozy shadow inside the glazed public buildings or private cottages.
Selection and installation of retractable awnings
If you are going, the Pergolas-Awnings company is at your service. We will help you find nice solution According to your style, we will carry out all the work on measuring, assembling and installing the finished product.
The awnings we offer are designed in Belgium, Germany and Italy. All models are time-tested and meet high European quality standards.
We complete orders on time and guarantee the reliability of all parts and structures. The main thing in our work is that you are satisfied with the result.
