Useful tools for your garden with your own hands. Homemade crafts for the cottage, garden and vegetable garden. Useful crafts for the garden

Private sector for many it is associated with severe permanent job. Plant a vegetable garden, monitor the growth of plants, and harvest. All this, of course, needs to be done. But if you organize the whole process correctly, then the work will be a joy. And there will still be a lot of free time for relaxation. And homemade products for the garden and dacha, made with your own hands, will help with this. Someone will object that everything can be bought ready-made in the store. This is true. But, firstly, there is not enough money to buy everything. And secondly, the process of making something useful from scrap materials can bring a lot of positive emotions.

Russian people have always been resourceful and inventive. And a huge number of hand-made homemade products for the garden and garden, photos of which can be found in our article, are proof of this. We will offer for consideration only a few options that will be useful in any area.

Flowerbed box

Many gardeners have recently given preference to flower beds located in boxes. They are raised above ground level and fenced on all sides. This makes the maintenance process easier, and the garden bed looks more attractive and interesting. It is possible (or even recommended) to use such structures on soils poor in nutrients.

Homemade products for the garden involve the use of scrap materials. Therefore, to construct the box, you can use boards left over, for example, from building a house. If you don't have them, you'll have to purchase them at the store. A box of arbitrary dimensions is constructed from them. The dimensions will depend on the size of the plot, its style and the plant that is planned to be planted there. The height of the side is made approximately to the knee, so that the layer fertile soil was thicker.

It is fixed to the bottom of the manufactured box metal grid with a small cell. It will provide protection against the penetration of rodents and moles. If there are none on the site, then you can do without a grid. You can easily make a small greenhouse from a box bed. Its height is selected taking into account the plants planted there.

Drip irrigation

Homemade products for the garden will simplify such a difficult process as watering plants. You can make a system drip irrigation. To do this, you will need a large barrel (metal or plastic), a hose, capillaries (you can make holes in the hose at a certain interval) and various connections(tees, clamps, etc.).

The barrel is raised approximately 1.5-2 m from the ground. To do this, you can weld a special stand from metal corners. Thanks to this, there will be stable pressure in the system. A main hose comes from the barrel. A filter must be installed on it so that debris does not clog the system. The capillaries are fed from the main hose.

DIY sprinkler

Homemade products for the garden and garden will allow you to create something necessary and useful on your site from improvised means and materials. For example, from old plastic bottles that are always thrown away, you can make a sprinkler for your garden. It will allow you to process and water plants of different heights. TO watering hose the sprayer is attached. The same spray nozzle is screwed onto a long stick (the longer the better). The lever is secured with a thread while pressed.

In a 1.5 liter bottle, a hole is made in the neck with a hot nail. A bolt is inserted into the hole and outside secured with a nut. The bolt must be drilled through with a drill. A hose is put on it and secured with a clamp. After applying pressure to the system, the nozzle spins and water is sprayed.

Tire compost bin

Old tires from passenger cars are one of the most popular and available materials for making homemade items for the garden. You can even make them compost pit. You only need 4 of them.

One of the tires, which will serve as a base, is cut. One side panel is cut off from it. From the rest, two sidewalls are cut off to form rings. Next, you just need to install the tires on top of each other in the designated area.

Bench

After all the work in the garden, you can relax. And on this score you can also choose suitable option handmade crafts for the garden and garden. With a small set of tools and materials, you can make an attractive, streamlined bench. It will become a place where you can relax and unwind.

Materials you will need:

A sheet of plywood (preferably pine) measuring 90 x 90 cm and 1.6 cm thick.
There are 7 slats made of the same wood (2 cm thick, 9.4 cm wide and 140 cm long).
Boards 2 x 6.9 cm and 100 cm long, 3 pcs.
Boards 2 x 6.9 cm and 140 cm long, 9 pcs.

The parts will be held together with 0.5 x 5 cm self-tapping screws. In addition, glue will be useful for joining wooden elements, wood varnish, turpentine.

The plywood sheet is cut into three parts. A template is drawn on them for cutting out the side panels and the central crossbar. The shape is cut out with a jigsaw. On the back there are 3 recesses for slats that will hold the structure.

Homemade products for the garden will help you make your own country life nicer and easier.

Do-it-yourself homemade products for the garden and garden not only perfectly complement personal plot, but will also help you save a decent amount of money. Today there are many useful devices for the garden, simplifying daily life. Usually, a large number of unnecessary things and materials that people do not use in their apartments are collected at the dacha. it takes up a lot of space. Any summer resident has the opportunity, using his imagination, to make simple homemade items.

Garden tools

When visiting hardware stores, many buyers note that the quality of garden tools does not correspond to their cost. Even an expensive and high-quality shovel is very easy to damage. One option is to personally make some kind of country tool that can perfectly replace a regular bayonet shovel. for example, a garden digger, which is not only very easy to make, but also easy to use. If we compare an ordinary shovel and this country tool, it can be noted that it is much easier for the second to dig the ground, and it does not place heavy loads on the human spine.

Homemade digger

To make a digger for the garden with your own hands, you need those items that often lie and gather dust in the country. Must have:

metal sheet 2 mm thick;
metal pipe 0.5 inches in diameter;
2 bolts and 2 nuts;
2 engraver washers for the bolts and 2 hours of free time.

Needs to be cut a metal sheet into 7 segments, similar to stakes. That is, you should get a stake that is wide on one side and tapering to the other. Then, take a pipe 43 cm long and measure 5 mm from the edge. The following marks are made every 6 cm. Another 5 mm should remain on the other edge of the pipe, which should also be marked. Using a grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.

The cut stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and secured by welding. The remaining pipes are then welded into a U-shaped handle and bolted to the workpiece. That's all, the digger is ready to use.

Garden decoration

Don't forget about the opportunity to become a designer own garden in the country. After all, you can make not only country tools, but also much more. And to add some zest country house, you can post a beautiful and original garden path made of stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:

stone used to lay out the path;
sand;
gravel and board 25-30 mm thick.

Work should start with preliminary measurement distances of the future track. To do this, four pegs are driven in and connected in pairs with a guide rope. Afterwards, you need to remove upper layer soil, or in other words, dig a trench. When working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will help not only to use correctly and economically Construction Materials, but will also simplify subsequent work. You need to install boards along the edges of the trench; they will act as sides into which sand and stones are placed.

First of all, gravel should be poured into the bottom of the hole. It will not only perform a shock-absorbing function, but will also provide indispensable assistance with drainage groundwater. Next, the gravel is covered with sand, which should be moistened in advance - this way it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm, and then you need to level the surface of the embankment with a board. Only after this can stone or paving stones be laid. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone again.

Mosquito traps

The invention fights not mosquitoes, but their larvae. It is suspended from tree branches. Mosquitoes lay their offspring in this device, which prevents the newly born mosquitoes from leaving it. For more effective fight with bloodsuckers you should make as many of these traps as possible. But even the use of this gadget cannot provide 100% protection from mosquito bites.

One of the most simple ways- is to use regular plastic bottle as a trap. You need to cut off the upper part with the neck and insert it into the lower part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this you will need 15 g of yeast, 45 g of sugar and warm water. All 3 components need to be mixed and the resulting solution poured into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap can attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in their living space.

These were just 3 of the most interesting and easily made devices for the garden and garden. Do not forget that a person can create something more useful and unique from available materials, you just need to give freedom to your imagination.

sadovod.guru

Homemade products for the garden and dacha: interesting ideas

For many people, the private sector is associated with hard, permanent work. Plant a vegetable garden, monitor the growth of plants, and harvest. All this, of course, needs to be done. But if you organize the whole process correctly, then the work will be a joy. And there will still be a lot of free time for relaxation. And homemade products for the garden and dacha, made with your own hands, will help with this. Someone will object that everything can be bought ready-made in the store. This is true. But, firstly, there is not enough money to buy everything. And secondly, the process of making something useful from scrap materials can bring a lot of positive emotions.

A metal mesh with a small cell is attached to the bottom of the manufactured box. It will provide protection against the penetration of rodents and moles. If there are none on the site, then you can do without a grid. You can easily make a small greenhouse from a box bed. Its height is selected taking into account the plants planted there.

Drip irrigation

Homemade products for the garden will simplify such a difficult process as watering plants. You can make a drip irrigation system. To do this, you will need a large barrel (metal or plastic), a hose, capillaries (you can make holes in the hose at a certain interval) and various connections (tees, clamps, etc.).

DIY sprinkler

Homemade products for the garden and garden will allow you to create something necessary and useful on your site from improvised means and materials. For example, from old plastic bottles that are always thrown away, you can make a sprinkler for your garden. It will allow you to process and water plants of different heights. A sprayer is attached to the watering hose. The same spray nozzle is screwed onto a long stick (the longer the better). The lever is secured with a thread while pressed.

In a 1.5 liter bottle, a hole is made in the neck with a hot nail. A bolt is inserted into the hole and secured with a nut on the outside. The bolt must be drilled through with a drill. A hose is put on it and secured with a clamp. After applying pressure to the system, the nozzle spins and water is sprayed.

Tire compost bin

Old tires from passenger cars are one of the most popular and affordable materials for making homemade items for the garden. You can even make a compost pit out of them. You only need 4 of them.

Bench

After all the work in the garden, you can relax. And in this regard, you can also choose a suitable option for homemade crafts made by yourself for the garden and garden. With a small set of tools and materials, you can make an attractive, streamlined bench. It will become a place where you can relax and unwind.

Materials you will need:

A sheet of plywood (preferably pine) measuring 90 x 90 cm and 1.6 cm thick.
There are 7 slats made of the same wood (2 cm thick, 9.4 cm wide and 140 cm long).
Boards 2 x 6.9 cm and 100 cm long, 3 pcs.
Boards 2 x 6.9 cm and 140 cm long, 9 pcs.

The parts will be fastened with 0.5 x 5 cm self-tapping screws. In addition, glue for joining wooden elements, wood varnish, and turpentine will be useful.

Homemade products for the garden will help make your country life more pleasant and easier.

fb.ru

DIY crafts for the garden and vegetable garden (39 photos). Pond from an old bathtub. Pallet bench. Rake hanger. Flower pots made from shoes

It's no secret that today almost any product for garden plot They are not cheap in stores. So, for example, purchasing various accessories will cost, as they say, “a pretty penny.” And if you make them from scratch, you will spend no less, because you still have to buy the raw materials.

So why not save money and organize homemade projects for the garden with your own hands from what you usually have on hand or is inexpensive? Moreover, everything can be done really beautifully and neatly. And in addition it is also functional.

Crafts on the site

In this article we will look at the most useful homemade products with your own hands for the cottage and garden, which are distinguished by their simplicity and originality.

Beautiful “useful things” for the garden

One thing worth noting important point- you need to understand that only a small part of the list of crafts that can be made will be discussed. It’s just that these options are like a start, a “push” for imagination.

After all, here it is important to understand the very principle of how simple it is to organize everything, and then everything depends only on your imagination. So, let's begin the review.

Pond from an old bathtub

Pond from the bath

If you make a small reservoir of this type on a site, it will perform several functions simultaneously - we will familiarize ourselves with them in the table below.

Agree, the task is worth implementing. Moreover, for this you only need old bath, which in most cases is available on the site.

The pond is made according to this scheme:

We dig a hole with our own hands in the right place, which, according to its parameters, should be slightly larger than the dimensions of the bathtub.

Pit design diagram

Advice: be as responsible as possible when choosing a location. It is not advisable to place a pond too close to dining table, For example. The fact is that they can periodically fly to the water various midges, bees, etc.

And brushing away insects during lunch is not very pleasant, as you understand.

We lay several boards at the bottom of the hole - the bathtub will stand on them.
We insert the bathtub into the hole and level it. We close its drain hole with a plug. In this case, it is advisable to treat the outer edges of the cork with silicone to prevent water leakage from the container in the future.

Leveling the bathtub

We fill all the free space between the metal and the soil with earth.

Well, then all that remains is to decorate the structure. To do this, you can lay out beautiful stones around the perimeter of the pond in the garden plot or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets or panels that are more or less resistant to moisture.

An example of board edging

As for filling the container, you can use both water from the central water supply and natural flows. For example, you can bring the edge of the gutter to the bathtub drainage system houses and the pond will be filled with rainwater.

In principle, such homemade products for the garden can be slightly adjusted - use any tank, barrel, etc. instead of a bathtub.

Now let's look at another very convenient craft.

Pallet bench

Surely at some point you will want to sit in the garden - near artificial pond, For example. And then you will need one like this useful design like a bench.

Purchasing a new product is expensive. It is much easier to make a bench from a pallet - if it is not available, then, as a rule, a considerable amount of it is thrown away near large warehouses and factories.

The bench is made quickly.

Make a cross cut on one side of the pallet to the left of the reinforcement bars.

Cut line

On the other side, perform exactly the same operation, only on the other side of the bars.

Cut line on the other side of the pallet

We divide the product into two parts.

Dividing the pallet into two halves

We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.

The principle of connecting halves

We fasten the wood with self-tapping screws at all connecting points.

Fixation points

Photo of the lining under the bench

As you can see, everything is quite simple. Now you can paint the bench and install other homemade items for the garden and dacha.

Now let's look at a very functional, original and cheap craft.

Rake hanger

A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.

Of course, the “primitive” version of this design is ordinary nails or self-tapping screws. However, it looks rather unattractive, and besides, the nails tend to gradually loosen inside the holes into which they are driven.

And loosening means that such “hooks” will periodically fall to the ground. We offer a more original and reliable solution - to make a hanger from an old rake.

Rake hanger

You only need the metal part, without the wooden handle. Even if such an element is not available in barns, purchasing it at the nearest market is not a problem. The price of the rake is acceptable for everyone.

The hanger is mounted like this:

We tie the wire to the two edges of the line on which the teeth are attached. In this case, there should be only one piece of wire. That is, it turns out that the fastener, in fact, resembles how paintings or mirrors are hung on a string.
On the wall or anywhere Right place drive in big nail and hang a rake on it.

The hanger is ready - you can hang anything you like on the rake teeth: shovels, caps, etc.

Now let's apply old shoes, which is usually a lot at the dacha.

Flower pots made from shoes

The ideal option is to have rubber boots, but in principle, regular leather shoes will do.

Shoe pots

From such shoes you can make non-standard flower pots, which will fit perfectly into the style of almost any garden.

The workflow here is like this:

We nail or screw the boots to the fence or any other suitable plane.
We fill each boot with soil.
We make several holes in the soles - they are needed to let out excess water.
Plant flowers in pots and enjoy appearance inventions.

An example of pots made from boots that are suspended from an arch

Note! Any DIY garden crafts can be “improved” ad infinitum. The main thing in this matter is to correctly organize the “basic” thought, idea.

And you can decorate the invention with anything and however your heart desires - there are no restrictions.

Remember this simple rule when planning “benefits” for your garden or vegetable garden.

This concludes our review of useful and original crafts for a garden plot and summarize the article.

Conclusion

As you can see, gardener’s homemade products are quite simple, and they can be made from almost anything. We hope that this article will become a catalyst for your ideas and you will be able to decorate your area beautifully. Well, if you want more information on this topic, we recommend watching the video in this article.

Add to favorites Printable version

9dach.ru

Homemade products for the garden / Samodelka.net - Do it yourself with your own hands | Homemade products. Useful tips and recommendations for the home craftsman

101 readers, 162 topics

Everything related to cottages, gardens, vegetable gardens and country houses. Tips on growing plants, making garden tools, homestead construction, etc., etc.

Working on the ground can really be easy and enjoyable if you use the right tools, and we will tell you how to make such devices for the garden with your own hands! Look at the inventions and tool improvements made FORUMHOUSE users, may they serve you faithfully too.

Flat cutter "Mower"

User www.site Antol13 invented and designed the “Mower” flat cutter (from the word “braid”). Previously, a forum member used a Fokin flat cutter to process potato rows, but then he decided to make his work easier: “it seems good, but it’s not that, and the quality of the metal, its thickness leaves much to be desired, and the prices are too high.”

For a new device that would penetrate more deeply into the soil, the forum member decided to use a scythe that was lying around unnecessarily and a cutting purchased in a store for 30 rubles. He spent 40 minutes making the flat cutter. The work does not require serious technical skills:

Use a grinder to cut off the stiffening collar so that during operation the flat cutter does not experience resistance and does not cling to the ground. The optimal length of the flat cutter blade is 17 cm.
Increase the angle of attack by bending it in a vice using a gas wrench. The angle of attack of the blade is 30-40 degrees.
For better fixation in your hands on the handle of the flat cutter, make grooves on both sides with an electric planer.
A stainless steel clamp at the top of the tenon will strengthen the fastener and prevent loosening.

The flat cutter performed excellently in its work. It also performs the functions of a scythe: it can be used to mow old burdocks, tartar, and other “grass vermin.”

Antol13

The manufactured flat cutter exceeded all expectations; I have never experienced such pleasure in work. Two working edges allow you to do the job quickly and with good quality without bending.

Beet seeder

viktor50 I planted beets by hand. The soil was slightly moist, and few beets sprouted, there were even gaps of 1-2 meters, although at the state farm where the seeds were taken, the sprouts were good. “Then it dawned on me that there was a seeder there, it was sowing seeds and rolling them down. Without rolling, seeds seem to hang in the soil, have poor contact with moisture, and if the soil is slightly dry, you may not be able to wait for germination.” On next year in just half a day, a forum member made a semblance of an industrial seeder in just half a day. The seeds germinated close to 100%.

By design, the handle is located in front of the seeder (the seeder is pulled by one person). At the state farm yard, gears with a diameter of approximately 200 mm and a width of 20-30 mm were collected. They were welded together to create a roller with a diameter like gears, a width of 15 cm and a weight of 5-7 kg. A piece of pipe with approximately 3/4 diameter at the bottom is slightly bent along the direction of the seeder, along back wall cut 5 cm and the pipe is unfolded (it turns out like a hollow spout of a cultivator). This pipe is attached to the handle first, then there is a device that rakes the furrow. Behind this hiller there is a welded gear wheel; it compacts the planting. A two-liter plastic bottle with a cut bottom is inserted into the upper part of the pipe: the person who follows the seeder throws beet seeds into it.

viktor50

That's the whole device, as simple as three kopecks. There are no turned parts, everything is done on the knee. If there is welding, then there are no problems with assembly at all. We have been using this seeder for about 20 seasons.

zayka2 makes things like this manual seeders, copied from “Vinnichanka” with a brush sowing device. He slightly improved the design: he installed removable drive sprockets and modernized the marker - he installed a control handle so as not to bend over to throw it to the other side. With such seeders you can sow almost any seeds: carrots, nigella onions, beets, beans, peas, corn.

Universal garden wheelbarrow

Forum member unkas This year I had to start filling up holes on my site. There were two-wheeled carts available, the track of which turned out to be too wide in some places. Garden wheelbarrows didn't like the neighbors unkasу for different reasons.

The forum member bought a polyurethane wheel that does not need to be inflated (a similar wheel, but not made of polyurethane, but made of rubber, is cheaper), 2 corners, an axle made of a bolt with a nut and a block of 40 * 40 * 3 m. He had plywood and the rest.

unkas

Wheelbarrow building is an exact science. If you do everything by eye, it turns out a little crooked.

Home water tower

Jacomo Venciano builds a water tower to water the garden.

It looks like this: a small round foundation with three concrete rings two-meter diameter, placed on a solution. On top there is a concrete cover with a hatch. The expert calculated the strength of the tower rings (the weight of the rings plus the water pressure). It turned out that there is a threefold reserve even for the weakest concrete, but provided that the concrete is not saturated with water. That is, waterproofing is important both inside and outside (from rain). For external waterproofing, the forum member decided to make a conical roof with an overhang.

Stairs are installed inside and outside the tower. The seams between the rings are carefully puttied, the transportation holes are sealed. Everything outside is painted green, inside there is waterproofing on the walls and foundation and a layer of plastic like acrylic.

At the bottom there is a drain and watering fitting. At the top there is a filling fitting. From the drain fitting through the tee to external wall a transparent hose-level gauge is hung.

Jacomo Venciano

I will connect a float valve from the toilet tank with a pre-coarse filter to the filling fitting inside. I will pour from summer water supply pressure 1 atm. hut

In winter, the tower will be empty, and in summer, the water in it will warm up to the average daily temperature, up to 15 degrees. It will be possible to dilute fertilizers in the tower to feed the garden, mixing them with a drainage pump.

The forum member will not bury the container: the only advantage of a buried container is that the water in it does not freeze in winter. But why do we need irrigation water in winter?

Apple picking tool

Acordic I made a simple but functional garden device that can be used to pick apples and plums. Before that, she tried several options for fruit pickers from the store at her dacha, but then they all turned out to be abandoned and gathering dust without use. It turned out that there is nothing better than a three-meter aluminum pole and a plastic bottle. The forum member often uses this device because of its lightness and convenience.

Acordic

And we can’t live without him anymore. It's convenient and doesn't require a ladder.

Screw planting of seeds

Denforever came up with a device for planting seeds that allows you to avoid making holes and subsequently thinning out the seedlings. The device is made in several versions: length 3 cm, 5 cm and 2 cm. In the future, a handle will be adapted to the device. In the photo we see that the screws are not screwed in - this is for convenient transportation to the dacha. Then they will need to be screwed in.

Miracle shovel

Serdsvetlana absolutely delighted with the “miracle shovel”, which is easy to make yourself. The ease with which the garden is dug up, the soil is loosened and the potatoes are dug up is surprising.

The peculiarity of tilling the soil with a miracle shovel: the garden is dug not across, but along. We take the miracle shovel by the edges top bar With both outstretched arms, we step on the platform (footboard) and it easily enters the ground. With a slight movement (can be combined with light shaking), taking two steps back, we move the shovel from a vertical position to an almost horizontal one. After this, we take a step forward, pull the shovel back 30 cm, give it a vertical position, drive it into the ground and repeat the cycles until the row ends. Then we proceed to process the next row.

Materials: half-inch pipe, round timber (or hexagon) with a diameter of 15 mm.

For ease of transportation, a collapsible design can be made.

Read about others on FORUMHOUSE homemade tools– a wood splitter, a concrete mixer and about what tools should be in the arsenal. And watch our video reviewing new products for gardening.

Local area

With the arrival of spring, life on weekends in cities comes to a standstill, because a lot of people head towards their second home - to the dacha, where there is always something to devote time to. You can work on the beds, or sit in the sun, but some ingenious summer residents prefer another, useful, pastime - they invent a variety of miracle things - homemade products for the garden and garden with their own hands, which can save money and significantly ease the difficult life of a country house.

The dacha is a storehouse of necessary material

The dacha plot is a kind of Mecca, where heaps of old, but still strong things flock, which one still doesn’t dare throw away. Among the accumulated “wealth” you can most often find items old furniture, clothes and shoes, dishes and a lot of different “junk”. But there are also those products that are not so lucky; they end their lives in trash cans. This applies to plastic bottles, car tires, various materials, remaining unclaimed after repairs.

Craftsmen do not waste scrap materials like that, because they know how to find a use for each of them, and therefore breathe a second life. Moreover, from under their hands come not only cute decorations for summer cottage, but also things that are capable of having practical significance. We'll talk about them first.

Practicality is paramount

With the help of “very skillful hands”, unnecessary things can be turned into objects that are difficult to do without in a country house.

A car ramp turned into an ottoman

This work is quite simple, and you don’t need a lot of materials for it. In addition to the ramp, you need two pieces of plywood, some thick clothing, or a thick rope. 2 circles are cut out of plywood, their diameter should be 4 cm less than the diameter of the slope. They are attached from the bottom and top with self-tapping screws. If a thick fabric is chosen for the manufacture of the ottoman, then it is necessary to add foam rubber to the list, from which a circle is cut out for the future seat of the same dimensions. The clothes are first ripped out, then a cover is sewn from it. If a rope or cord is used, then the slope is glued around the slope with them.

Plastic bottles that save crops from drought

Suitable for those summer residents who do not have the opportunity to visit their dacha often. It is necessary to take large bottles, preferably five-liter ones. You need to make 2 rows of holes in them in increments of 2-3 cm, and then dig each one at an equal distance from 4 bushes so that the holes are at the level of the roots. Then you need to pour water and close the bottles with lids.

What do they prefer to “neat people”? beautiful beds, you will like their design with these bottles. Bottles can be used to make your garden beds look more fun. different colors. For strength, sand should be poured halfway into each container. After digging the trench, simply secure the bottles with their bottoms up, then cover with soil. If this option does not suit you, you can paint the fence with water-based paint.

A bathtub turned into a flower garden or pond

Making a flower garden out of a bathtub is not at all difficult. Expanded clay or broken bricks are suitable for drainage; you need to pour the substrate on top and plant the plants. The outside of such a “flowerbed” can be painted with cheerful paint, or covered with colored glass.

Arranging a mini-pond from a bathtub is pretty simple task, the main thing is to dig a hole, place it there, dig slate around the perimeter, rising 20 cm from the surface of the earth. Attach the cut hose to its edges, and then cover the entire structure with polyethylene and fill with water. The perimeter is decorated with stones, and the pond itself can be populated with aquatic plants.

Wood: swings and furniture for every taste

Both kids and adults love the swing. If somewhere on your site is “boring” old chair, then turn it into a swing by sawing off the legs. After this, all that remains is to paint the product and secure it to the branch using ropes. If you like to tinker with wood, you can make a new swing from wood left over from construction.

Wonderful furniture comes from ordinary ones wooden pallets. To give it the necessary mobility, it is worth purchasing furniture wheels for such a “set”. Hemp and poles can be an excellent material for making original country furniture, and a flight of fantasy sometimes helps to create real masterpieces.

Don't part with metal!

If old non-working metal units have found a home at the dacha, then making useful things out of them will not be difficult. Tank washing machine will successfully replace a barbecue: for this you only need a grinder and a few legs, the role of which can be assigned to the pins. If you need to make a smokehouse, then it will be enough to attach a mesh to a barrel or bucket.

But most often metal is used for the frame of greenhouses and greenhouses. This type of work is extremely popular. You can make such a “skeleton” using welding machine, or without it - install pipes or profiles using bolts or self-tapping screws. If the electrical network for welding is weak, then the easiest way would be to rent a diesel generator.

DIY crafts for the garden and garden with your own hands: decoration

The original solutions decorating the site are incredibly diverse. For example, plastic bottles make wonderful gazebos, nice fences and simply unique products.

Building an uninhabited island from plastic bottles

A mandatory attribute of a summer house for a large family is a sandbox, and in order for the little robbers not to get bored, they need their own “treasure island”, so they cannot do without palm trees. Yes, and they are made from such versatile plastic bottles. The trunks are made of metal rods, the length depends only on the height of the planned “tree”. You can install them in the corners of the sandbox, or in the middle.

Then the base is covered with stones and filled with concrete. The bottom of the bottles must be cut off and placed on the rods. If there is a possibility that “pirates” might test the barrel for strength, it is better to additionally glue its components together.

For the crown of the tree, green bottles are taken, and each palm tree will require 6 pieces of rigid wire. The bottom of the bottles is cut off, then they are cut lengthwise, but it is necessary to leave a distance of 2 cm at the neck. These “branches” are placed on a wire that is attached to the trunk.

Plastic bottle caps: the choice of the patient

Such decoration of the house will lead to the fact that all passers-by, without exception, will marvel at it. But you will need a lot of lids and labor. They are attached in different ways: they are nailed to a wooden building with thin nails, you can use glue, others make 4 side perpendicular holes in the lids to stretch two wires. The good thing about this labor-intensive process is that the patterns can be changed if the soul requires changes.

Do-it-yourself homemade products for the garden and garden with your own hands is too huge a topic, so we only touched on a fraction of the methods and materials: it seems that our Russian craftsmen have adapted all the things in the world for this. Therefore, you can invent something of your own, because the main thing in this matter is inspiration and imagination.

In this video you will see a number of wonderful things:

DIY drawings for a summer house and vegetable garden will be useful to everyone. A dacha is the ultimate dream of, if not every average person, then certainly every second person. Not everyone, of course, will be lucky enough to become the owner of suburban area, but those who are still lucky need to constantly monitor and improve it, which requires considerable expenses. Do-it-yourself homemade products for your dacha and garden help you keep your dacha in impeccable condition. Today we will tell you a few secrets on how to save money on buying the necessary things for your garden and make them at home. Of course, not everyone can make a grader with their own hands or self-propelled guns for a tractor, but most of the homemade products will definitely come in handy on the farm.

Do-it-yourself variator for a machine

If you need to constantly work at the machine, then frequent changes in speeds lead to wear on the unit and have the additional disadvantage of regularly stopping the device. As alternative option you can use a homemade variator for the machine. It can be made from wood with your own hands, without significant investment of time and money. The variator cones are made from hard wood, and you don’t have to use a lathe to make them; you can cut them at an angle using a jigsaw, equal to the angle cone inclination.

If you assemble a cone from disks, then you must glue them together or nail them. The finished cones are seated deep on metal rods and secured with screws. In order for the belt to move evenly on the machine, roller guides are required. The rollers can be taken from furniture fittings, but if they are not available, you can use ordinary bearings.

An old washing machine is a real treasure

If you have a working engine from a washing machine, then this is a very valuable find, since you can use it to make many useful household devices. The easiest way is to use an engine from a washing machine to make an excellent sandpaper for sharpening knives, different instruments and drills.

The main problem in making the device is attaching the sharpening stone to the engine body itself. In most cases, the whetstone has a hole that does not fit the motor shaft. That is why you need to make a flange that, on the one hand, can be pressed onto the shaft, and on the other, will have a thread, which will allow it to be screwed in and secured grinding wheel.

Image 1. Making emery from an old washing machine engine.

Experienced craftsmen recommend that beginners use old pieces of pipe 32 mm long and no more than 20 cm long as a flange. On one piece of pipe we make a thread whose length should be 2 times the thickness of the grinding wheel. The other end of the pipe is heated with a soldering iron and placed on the shaft. To better hold the pipe, it can be bolted together. After this, take 3 nuts and screw them onto the flange from the thread side until it stops, then put on the washer and, finally, the grinding wheel, then the washer again, and secure with a nut. At the end you can also add a lock nut.

The hardest work is done, after that all that remains is to fasten the motor, but this is a very individual procedure, since it is not known what holes are available on the motor from your washing machine for fasteners. Based on them, you need to make a stand; it is best to use small corners, fastening them together and placing the emery on the workbench. The final step will be connecting the engine to the electrical network. Look at ready-made option You can see the sharpeners in the photo, drawings are also included (image 1).

Image 2. Grill from a washing machine drum.

Homemade items for the dacha can also be made from other parts of the machine; for example, a drum can make an excellent kebab maker. Drum in washing machines They are made of stainless steel, which in itself is important, since the body is very strong and reliable. It’s very easy to make homemade items for a summer house from a drum; you just need to remove it from the machine body, but together with the shaft and pulley. We put the pulled out drum with the hatch on top and the wheel down. Now the brazier is ready, with the help of a grinder you can, of course, trim the front of the drum or the sides to make it more convenient to throw firewood, but here everything depends on your free time and imagination. This makeshift brazier looks very neat, with the drum dotted with small holes, which allows air to be evenly distributed over the coals and provide the necessary heat (image 2).

Hand-held circular saw from a grinder

Image 3. Device diagram circular saw.

The circular at the dacha is very useful thing, few people know, but it can be made from a grinder. You only have 2 elements left to complete: the sliding stop and the axial handle. After this, you will be able to use your circular saw from an angle grinder at any time.

2 small pieces will serve as a sliding stop metal corner. The edges of the corner are rounded so that they do not catch the part during processing. The corners are connected to each other at the back and front using bolts or nuts. A clamp made of metal tape must be placed on the body of the above-mentioned power tool. A folded strip of sheet metal or galvanized steel with a hole for the rear bolt of the sliding stop is attached to the screw tie of the clamp, which will be located below.

In the grinder gearbox we make 4 small holes for M5 bolts. For convenience, the gearbox can first be disassembled to better see where the hole can be made. These 4 holes are needed to attach the handle. The handle can be made from an ordinary metal tube. On this manual option grinder saw is finished if you want to make a real one stationary option circular saw, then you will need more skills in work, tools and well-calculated drawings (image 3).

Agricultural equipment and devices

Agricultural machinery is very important tools in the country, without which not a single owner can do. Agricultural equipment today costs a lot, and you don’t really want to spend a lot of money on something that is rarely used, but at the same time you can’t do without it. One of the most popular devices is a wheelbarrow; it can be made from improvised means, thereby saving a lot of money. To make it you need:

Image 4. Drawings of a homemade cart.

wheel, preferably made of rubber;
plywood;
2 corners;
wooden block, 3 m long;
nuts and axle from a bolt.

The method for making this tool for the garden is very simple and will be understandable even to a novice craftsman; the main thing here is to measure everything clearly, because if you do it by eye, it will turn out crooked. Drawings of the wheelbarrow are attached (image 4).

An equally popular tool for a summer cottage, which winter time will help get rid of snow, that is, a shovel can also be made from plywood. You will need:

plywood 10-12 mm thick;
wooden stalk;
nails;
steel plate 4-6 cm wide.

The plywood will serve as a shovel bucket, and the timber will allow you to hold the handle. Metal is used to edge the front and back parts of the plywood - the future bucket.

To cultivate a garden, a rake is often required. To make them you will need a wooden block 35 by 35 mm. The length of the handle can be adjusted at your discretion, but it is not recommended to make it too long, as it will be difficult to use. In addition to the bar and handle, you need to make at least 4 metal teeth. The metal must be strong so that it does not bend to the ground during operation. You can use metal from an old shovel and cut the teeth with a grinder. The teeth are aligned with a hammer and holes are drilled for the screws. Then the structure is fastened.

Video about making a cart with your own hands:

Design of a sprinkler for a vegetable garden

Homemade agricultural equipment also includes sprinklers for the garden, which can be made practically from waste that is found in everyone’s home. To irrigate your garden you will need:

spray;
rubber hose 3-4 m long;
plastic one and a half liter bottle;
pump;
a wooden or metal stick of any length, but the longer the better.

The sprayer is screwed to the stick with the top nozzle so that the lever is pressed using nylon threads. Wrap it tightly so that the sprayer does not move. After this, take a plastic bottle and use a hot nail to melt a hole in the neck. Then we push the bolt into the molten hole and secure it with a nut on the outside.

Before inserting the bolt, drill a through hole in it with a simple 3 mm metal drill. The hose is put on the bolt and secured with a small clamp using a screwdriver. We attach the second end of the hose to the pump and again secure it with a clamp so that everything is sealed.

The bottle contains poison for spraying beetles or water for watering crops. Screw the container to the top of the spray bottle, which is attached to a stick. Next, with the nozzle closed, we pump up the pump a little, after that we unwind the nozzle, and the sprayer starts working. In this way, you can spray trees of any height and large beds; if necessary, you can simply place the device on the ground and pump up the pump from time to time.

You can even do it at the dacha small greenhouses made of film, you only need to drive a metal rod or stick into the ground and secure it to the base plastic film in the form of a cone.

Video about a drip irrigation system using a plastic bottle:

The film is secured from below in a circle from old barrel or adjusted with stones.

Conclusion on the topic

Now you know how to make expensive tools for a summer cottage without significant expenditure of money, time and nerves. The main thing is not what you use to improve your plot, but that you should like the work and being at the dacha should bring joy.