In this article you will learn what and how to refill a Zippo lighter correctly.
How to refill Zippo
Buy branded lighter fuel - Zippo Premium Lighter Fluid.
Original fuel for lighters is available; it is also sold in specialized stores, tobacco shops and shopping centers, at places that sell Zippo.
Branded fuel is gasoline purified from oily additives. It has almost no odor, does not smoke, and ignites well. The Zippo lighter works flawlessly on it: it lights up from the first click and produces a steady flame. First-class original Zippo fuel for the efficient operation of wind-resistant lighters is supplied in individual metal canister volume or Fuel manufacturer: Zippo Manufacturing Company, USA (country of production - USA). Premium fuels Zippo (Zippo Premium Lighter Fluid) and Ronsonol are created using a new formula, which gives less odor. The new fuel burns cleaner, ignites faster and is less irritating to the skin.
Any fuel has a drawback - it is highly volatile; within a few days, it completely evaporates even from a closed lighter. This is due to the fact that the fuel has volatile compounds, and the lighter body cannot provide complete sealing. Premium fuel for Zippo lighters is petroleum distillate and evaporates even when the lighter is not in use. Keep the lid closed. To reduce evaporation, keep the lighter away from bright sunlight and heat sources such as a radiator. Tip: If you haven't used your Zippo lighter for a long time, refill it anyway if you plan to go outdoors.
The Zippo design is designed for highly purified gasoline. Using cheap third-party fuel, you will incinerate the wick - it will burn out quickly. In this case, the cotton filler of the tank will become clogged with unburned gasoline resins. Cheap fuel is also unsafe for health.
A regular zippo holds about 10 ml of fuel. On average, active users have to refill a Zippo lighter once a week.
The lighter must be refilled away from sources of fire and flames. Pull the top of the lighter and remove the insert (inner part) from the body. You may need to apply a little force. If the insert in a new lighter turns out to be a little worn, this is normal. Abrasions occur during production as a result of numerous checks and constant removal of the insert.
2. Turn the insert over.
On its bottom surface you will see a small screw (hiding the spring that holds the flint in place) and a felt pad labeled “Lift to fill.” Underneath the felt are cotton balls that you will soak with fuel.
3. Open the fuel canister.
Pry the white spout on the canister cap with the housing lid and lift it up.
4. Lift the felt pad.
Insert the spout of the canister into the hole in the middle of the felt pad and bend its edge. In the future, when you get the hang of determining the level of filling by eye, you can fill directly through this hole, but by lifting the felt, filling is more convenient.
5. Fill the insert with fuel.
Don't rush: cotton wool does not absorb liquid immediately. When you see that the cotton wool is completely saturated with fuel and it rises to the edges of the insert, finish refueling. Try to proceed carefully to avoid overfilling. Return the felt to its place. If you pour too much, the lighter may leak. It's unpleasant, but it doesn't affect her work.
The second guideline for Zippo gas stations could be the tip of the wick. Pour in fuel, look at the tip of the wick, if it gets completely wet, then there is enough fuel. If the wick is already starting to drip, then it’s a bit too much, but that’s okay.
Avoid getting fuel on your skin, as... it is an irritant. If it does get on your skin, wash the area of contact thoroughly with soap and water. If irritation persists or gets worse, consult a doctor.
6. Insert the insert into the housing.
Turn the insert over, insert it into the body and shake the lighter slightly so that the fuel is distributed throughout the filler. Then wait one or two minutes until the excess gasoline in the gaps between the sides of the body and the insert evaporates. During this time, we advise you to wash your hands and wipe the outside of the lighter, even if they look dry. Make sure the canister is closed and there is no spilled fuel near you. Fuel is highly flammable. Now set it on fire.
If you do everything correctly, the lighter will be your faithful friend and assistant. We hope you have not chosen a third-party, cheap fuel that fundamentally does not burn, can smoke and worsen the performance of the lighter.
If you store your Zippo lighter in your pocket, we recommend that you carry it in an upright position, bottom down, especially after the first refill, especially if it becomes overfilled.
If after reading the article you still have questions, we will be happy to answer them.
How to refill a Zippo lighter– a question that faces every owner of an iconic accessory. Original Zippo always comes with a lifetime warranty, but consumables, including gasoline, must be purchased independently. They are presented in a wide range in the Sherlock chain of stores.
Proper refilling of an iconic lighter
Refilling a Zippo lighter should be produced only with branded gasoline of the same brand, which is also offered by Sherlock. The first thing to do is open the lid and pull out inner part from a metal body. It's not very difficult to do this. At the bottom of the accessory there is always a piece made of felt, on which it is written that gasoline needs to be poured here - “Lift to fuel”, or simply lift it to refuel. Now you should use some thin object (a paper clip will do) to select a dense porous material from the body, under which there is a soft substance resembling cotton wool. Gasoline is poured onto it.
How to refill gasoline lighter Zippo without any problems? Never pour flammable liquid in a hurry and in large portions, it should be absorbed into the cotton wool. The accessory will only be threaded when the fibers are completely saturated. This is easy to determine by touch. Only after you have determined that there is enough gasoline can you return the safety felt gasket to its place and reassemble the body.
If the most famous accessory in the world was purchased at one of the Sherlock stores, then consultants will definitely help you. Managers will show and talk in detail about how this simple procedure is performed. It's not very difficult, but you need to have a certain skill.
Now you can check how correctly you completed the task. Do everything as usual: open the lid and spin the wheel. If the accessory starts producing fire again, then you did everything right.
Any owner who has any difficulties in How to refill a Zippo lighter with gasoline, not only read the instructions. He will contact Sherlock network consultants directly. The second option is preferable. It is likely that it is not just a matter of incorrect refilling; other consumables in the accessory also need to be replaced.
Learned, how to refill a Zippo lighter correctly? Now be sure to wash your hands thoroughly and wipe down the iconic accessory with a clean, dry cloth. It is possible that during manipulation, liquid will get on the case and ruin its exclusive design. The question is How to refill a Zippo lighter, always excites the happy owners of these accessories. But everything turned out to be simple.
In this article I will tell you how you can extend the life of a lighter that does not have a gas filling valve.
To do this, we need an empty disposable piezo lighter, a gas can with a set of adapters, two matches and tweezers.
We start by disassembling the lighter, remembering the location of the parts.
We take matches and sharpen their ends a little with a knife.
We put the bracket in place and put matches under it.
This way we raise gas valve. We select an adapter that fits tightly onto the tip of the valve, and put the lighter and matches in the freezer of the refrigerator for 10-15 minutes. By freezing the lighter, we will achieve better gas flow when refueling. We take the lighter out of the refrigerator and immediately begin refueling.
Attention! Refueling should be done away from open flame sources. With one hand, place the gas canister on the valve and press it. Hold for 10-20 seconds and, without releasing the can, pull out the matches with your other hand. Next, remove the can and begin assembling the lighter.
Turn the adjusting screw almost all the way. We put all the parts in place and check the height of the flame.
The lighter can withstand this method of refilling approximately 6-8 times. Then the valve wears out and begins to “poison” the gas. This method can also be used to refill silicon lighters. But if you have to remove the flint and wheel, then after refueling it is difficult to put them back in place.
For buyers
We ask you to familiarize yourself with the most frequently asked questions from our clients. If you have not found the answer to your question, Contact us .
Windproof lighters
How can I repair my lighter?
The official representative of Zippo in Russia, the Avankorp company, provides a full range of warranty services for your Zippo lighter*. For free warranty repair of your lighter, you must provide it to us in any way convenient for you:
- Send the lighter by Russian Post to the address: 127015, Moscow, st. Vyatskaya, house 27, bldg. 5 (for Avancorp LLC)
- Bring it to us at the address Moscow, st. Vyatskaya, house 27, bldg. 5, 4th floor (company secretariat)
Make sure that the lighter is provided with the necessary explanations about the malfunction (the sooner the technician identifies the problem, the faster the lighter will be returned to its rightful owner). We will send the lighter back by Russian Post to as soon as possible and at your own expense!
* Please note that the restoration appearance lighters are not covered by the Zippo Lifetime Warranty.
Why does the production date of the lighter not coincide with the production date of the insert block?
There is a strong, but, alas, erroneous opinion that the year and month of production of the lighter (imprint on the bottom of the case) and the similar date on the wall of the insert block ("insert") must coincide, and this indicates the originality of the lighter. But this opinion is false, since the production of plug-in blocks and lighter bodies occurs on different production lines, and the combination of these two parts is carried out by the assembler. At the same time, in frequent cases, there is an “overlap” of dates and this results in a discrepancy, which in no way affects the originality of the lighter.
Why does Zippo lighter fuel evaporate so quickly?
Premium fuel for Zippo lighters is petroleum distillate and evaporates even when the lighter is not in use. Keep the lid closed. To reduce evaporation, keep the lighter away from strong sunlight and heat sources such as a radiator. Tip: If you haven't used your Zippo lighter for a long time, refill it anyway if you plan to go outdoors.Is it possible to polish a lighter?
You can clean the surface of your lighter soft cloth And special means for the cleaning. Before using the lighter, make sure you wipe off all the liquid and all the gas has dissipated. Brass lighters can be cleaned with a special high quality brass cleaner following the manufacturer's instructions. Sterling silver can be cleaned with a special high-quality silver cleaner.How do I refill my windproof lighter?
The lighter must be refilled away from sources of fire and flames.
- Remove the inside of the lighter from the housing. Lift up the corner of the felt pad on the bottom of the insert to expose the cotton balls.
- Slowly soak cotton balls with Zippo lighter fuel. Try to proceed carefully to avoid overfilling. If overfilled, fuel will leak out. Avoid getting fuel on your skin, as... it is an irritant. If it does get on your skin, wash the area of contact thoroughly with soap and water. If irritation persists or gets worse, consult a doctor.
- Insert the inner part into the body of the lighter, wipe the entire surface of the lighter so that there is no fuel left on it. Wash your hands before lighting. Make sure the canister is closed and there is no spilled fuel near you. Fuel is highly flammable.
If you store your Zippo lighter in your pocket, we recommend that you carry it in an upright position, with the bottom down, especially after the first refill, especially if it turns out to be full.
Why does Zippo fuel smell different from what was previously offered?
Premium fuels Zippo (Zippo Premium Lighter Fluid) and Ronsonol are created using a new formula, which gives less odor. The new fuel burns cleaner, ignites faster and is less irritating to the skin.Why does Zippo offer both lighter fuel and butane?
Zippo Premium Lighter Fluid is designed for wind-resistant Zippo lighters. Premium butane (Zippo Premium Butane) is used only in Zippo BLU® and Zippo Utility series lighters.How do I change the wick on my windproof Zippo lighter?
If blackness appears on the wick, pick it up with tongs and pull it out until an unused clean part of the wick appears. Cut off the tip of the wick at the top of the wind guard, and straighten the wick. The wick can only be cut twice before it needs to be replaced.
To replace the wick, use tweezers to remove all cotton balls from the combustion chamber. Insert the new wick downwards through the wind guard, pushing it through with tweezers.
Insert the cotton balls into place, placing the wick in waves in the intervening layers of cotton. Remember to trim the wick to match the height of the windshield.
Why does my Antique Brass ZIPPO lighter wear out?
The coating on the Antique Brass lighter body may wear out. This is due to the presence of copper impurities in the coating, which tends to oxidize and fade. This property is a feature of this model and is not a defect.How often should I change the wick in my lighter?
Depends on frequency of use. Change the wick when the lighter does not burn properly or after you have trimmed the wick twice.Do I need to change silicon?
Yes, on average silicon needs to be replaced every few weeks.How do I change the flint in my Zippo lighter?
- Remove the inside of the lighter from the housing.
- Turning the insert over reveals the head of the screw that holds the spring that secures the flint. Carefully remove the screw using a small screwdriver or coin (being careful not to lose the spring).
- Turning the inside of the lighter again right side Remove any remaining silicon (if any) by gently tapping the inside of the lighter on a hard surface.
- Insert the new Zippo silicon into deep hole, from which you removed the spring (the brass tip at the end of the spring is not flint).
- Reinsert the spring, then tighten the screw. Insert the inner part into the lighter body.
Can I buy a silicon spring or felt pad for my lighter?
Replacement parts are not sold, but we replace them with new ones if necessary. Usually, when warranty repairs, the technician identifies problems and determines the need to replace a single replacement part or the entire internal part.Does it matter if I use genuine Zippo or Ronson products to fill my lighter?
Of course it matters! Fuel, butane, wicks and silicones from Zippo and Ronson are specially manufactured for better work our products. This means that the product spends more time in your hands than in the repair shop.Can I purchase the interior or body of a Zippo lighter separately?
The individual components of the Zippo windproof lighter are not sold separately.Provide troubleshooting tips. What can I do to get my lighter working again?
Make sure the wheel produces sparks. If not, replace the flint. Use only original Zippo fuel, flints and wicks for the best performance of your Zippo lighters. Also suitable for use are fuels, flints and wicks purchased from the USA, Canada or Mexico. Soft material, which is used in some lighter flints not made by Zippo (or Ronson), can clog the wheel, making it difficult to ignite the flame. Make sure the lighter is filled with fuel. If it is primed and the flame does not ignite, check the wick. Trim it and replace it if necessary. Make sure that the wick is properly mixed with the pieces of cotton wool (filling) located in the inside of the lighter.Can I bring my lighter on board an airplane?
If you are traveling outside the United States, check the regulations of your airline or the regulations of the country to or from which you are flying before flying. All domestic flights and most international flights allow you to carry 1 windproof lighter in your luggage. On all US domestic flights, you are allowed to carry up to 2 pre-filled, wind-resistant lighters in appropriate packaging in your screened baggage. New, never refilled lighters can be carried in luggage without restrictions.What is the warranty for Zippo windproof lighters?
Every Zippo windproof lighter can be returned with our famous "It works or we fix it free." guarantee. For information on how to send your Zippo lighter to us for repair, go here.If your lighter runs out of fuel, then you probably have a question: “How to refill a Zippo?” The fact is that in addition to how to do this correctly, there is also the problem of choosing the fuel itself. After all, if you use a low-quality one, you can easily lose the lighter itself. This article will help you learn not only how to fill your Zippo, but also how to choose fuel.
A little history
In 1932, George Blaisdell opened the production of Zippo lighters. Over 86 years of operation, Zippo has produced thousands various models. The main features of these lighters are durability, wind resistance and a lifetime warranty. By the way, today the plant and its intermediaries around the world exchange broken lighters for new ones. Thanks to these advantages, Zippo gained worldwide fame and from a small production where only six people worked, it grew into a full-fledged factory with a large number employees. All lighters are manufactured in only one factory, which is located in the USA.
How often should I refill?
Surely you are worried not only about how to fill the Zippo, but also how often it needs to be done. Of course, this depends on how often you use your lighter. But there is one peculiarity: petroleum distillate is what gradually evaporates. It follows that if you do not use the lighter at all, you will still have to refill it. To reduce fuel evaporation, keep the lid tightly closed and protect Zippo from excessive heat and sun.
If you use the lighter actively, then on average the fuel will last for one week. It also depends on how long you keep the flame lit.
How can you refill a Zippo lighter?
The design of these lighters is designed for the use of highly purified gasoline and butane. Therefore, if you are wondering what you can fill your Zippo with, be sure to take this into account. Use only original fuel - Zippo Premium Lighter for gasoline lighters and Zippo Premium Butane for butane lighters. With it, the lighter will light up the first time and hold a steady flame, such fuel has less odor and the lighter with it does not smoke. If it is not possible to buy original fuel, then purchase third-party premium fuel only. When using cheap analogues, the cotton filler quickly becomes contaminated with burnt-out resins, and the wick itself burns out faster. There is one more point why you should not use cheap fuel. The plant reserves the right not to provide warranty service if such a fact is detected.
How to refill a Zippo lighter with butane
If you have a gas lighter, then use these instructions:
- Turn the lighter over so that the refill valve is at the top.
- Insert the nozzle of the gas cylinder tightly into it.
- Squeeze the balloon twice.
- Then turn the lighter back over and wait a few minutes.
It is important that the contents do not come into contact with the skin during refueling, since liquefied gas has low temperature, which may cause burns.
If you figured out how to refill the Zippo and did everything according to the instructions, but the Zippo does not light up, it means there is a vapor lock. Air just got into the tank. This happens if you did not turn the lighter over before refueling. In order to correct this circumstance, turn the lighter over and press the inlet valve with something sharp, then refill it.
How to fill a Zippo with gasoline
In order to understand that the lighter is full, while filling the fuel, simply count to 10. This time is enough for the tank to be filled.
But this is only if the lighter was empty before. If a certain amount of fuel is present inside before refueling, then determine the fullness by how much the cotton balls are saturated.
In addition to the question: “How to refill a Zippo lighter?”, you may be interested in replacing the wick and silicon. This is easy to do, just follow the instructions below.
Silicon
Replace the silicon every few weeks. This is done like this:
- Take out the inside of the lighter and turn it over.
- Remove the screw that is located next to the felt pad.
- There is a spring inside, remove it. After this, lightly tap the lighter on a hard surface. If there is still silicon left, it will fall out.
- Insert the new silicon first, then the spring into the hole.
- Screw the screw back in.
Wick
If you see blackness on the wick, do not rush to change it. To start, just trim. This is done like this:
- take any tongs and pull up the wick until a clean part appears;
- then cut the tip off at the top where the windshield begins.
You can do this twice, after which the wick will need to be changed.
How it's done:
Now you know how to fill a Zippo. If you follow all the instructions, the lighter will serve you for a very long time.
