Using wheels on a personal plot. How to make garden paths from old tires at your summer cottage? Tools and materials for work

(ArticleToC: enabled=yes)

Around offices and residential buildings, on garden plots and children's playgrounds, crafts made from old tires that have served their useful life are increasingly appearing. The shape of this landscape decoration depends on the amount of material available.

Even just by placing tires on top of each other and pouring soil inside, you get a nice flower garden. If you are smart, you can create real masterpieces from tires.

A great place to make it a reality extraordinary ideas is a summer cottage best material- worn tires. Craftsmen use them to build not only flower beds, but also other crafts from old tires: swimming pools, sandboxes, flower baskets, fairy tale characters and swings for children, paths, etc.

Landscaping continues to gain popularity, so every owner suburban area is looking for bold and exclusive ways to make it different from its neighbors.

The simplest but most effective way is to create crafts from old tires. You don't need to be a professional to do this. It is enough to make a sketch and select materials.

When the size of the plot is small, it is more reasonable to place single forms on it: a stork, a carriage, a heron, a frog or a parrot.

If the lawn is large, then crafts made from old car tires must also be large - vertical structures and multi-tiered flower beds.

Flower beds can be very different:

oval or round;
high or low;
in the form of animals and flowers;
multi-tiered.

In addition to paints and tires, various stones, technical marble, building materials, metal mesh, aquarium decorative rock. It is easier to carry out work with winter tires, which are thinner and softer.

Flower beds and flower beds made from tires

The easiest way is to make a flower bed from tires in the shape of a flower by first marking the shape of the petals with chalk. Then cut them out sharp knife. In the future, stable enamel, oil or nitro paint is used for decoration, which spread evenly on the source material and lasts a long time.

Will do aerosol can and car paint. To prevent plants from overheating, it is better to choose light-colored paint.

The white flower girl made from a tire looks elegant.

No less beautiful is a flower garden made of tires, for the decoration of which stone is used.

Monochromatic compositions and combinations various colors equally impressive.

Coloring

For low and small flowers they are painted in bright colors. The shape of the flower beds can be chosen in a variety of ways. To give an aesthetic appearance, when painting tires, it is advisable to also cover the inner surface from above.

Multi-tiered flower beds

If there are enough tires on the farm, you can create a multi-tiered flower garden, for which you will have to cut out the middle of all the tires to get rings.

The structure is assembled from rings in the following sequence:

install the largest tire in the center;
line the bottom with crushed stone or sand;
pour fertile soil;
Place a tire of a smaller diameter with similar filling on top.

The dimensions of the exposition components determine the number of tiers. Flowers or strawberries are planted in the gaps formed between them.

Flowerbed-swan - flower garden made from tires with your own hands

The swan made from tires looks original, with flowers on the inside.

Stepping back 30-40 centimeters from the edge of the tread, make a pair of rounded cuts (on 2/3 of the surface) parallel to the circle on the opposite side. The narrow middle part will be the neck. It is cut off on one side to form a head at the end. Wings will be made from the side surface. But to do this, the tire will need to be turned out and modified with cuts of different lengths that imitate feathers. Having painted the figurine and allowed the paint to dry, they begin to plant flowers (preferably low-growing ones, such as forget-me-nots).

Mixborders and colorful borders made in the form of cups with flowering flowerbed arrangements will transform the area beyond recognition and at the same time make it cozy and unique.

Creative flower garden turtle

This cute figure will be made from a tire and a tread cut into 4 parts. The protector paws are inserted into the slots made on the sides of the tire. They are secured with wire staples, just like a tail cut from rubber.

A head made from crumpled newspapers can be attached to the neck (plastic bottle) using tape. You can put a “Panama hat” made of plastic or straw on it.

Then, the craft is painted according to real “turtle” laws, so that it is clear what they wanted to depict. The eyes and mouth are drawn, and plants are planted in the body.

Flowerbeds made of rubber tires

Do-it-yourself flowerpots made from old tires will become more than just a functional detail in the design of the site. They will give it exclusivity, complete the composition, and emphasize the splendor of blooming flowers. This material has many advantages: you don’t need to spend money on it, it is resistant to adverse factors external environment, so it does not lose its attractiveness over many seasons. The most suitable for creating flower beds are imported winter tires with a diameter of R12-R17 (and the more wear they have, the better), since they are softer.

Video: DIY flower beds. Flower garden made of tires.

DIY tire track: economical, beautiful, reliable

Tires make wonderful paths for suburban areas that are not afraid of the vagaries of nature: in winter this material does not crack, in rainy autumn it does not get wet, in summer heat not deformed.

Arranging tire paths will not take much time, but the area will be noticeably transformed. There will be no material costs required for tracks that will last an incredibly long time. In addition, it does not require additional care and prevents the germination of weeds.

Everything you need to make her look well-groomed for a long time, this is washing with a hose or watering can, and sweeping away debris. Even after heavy rains, the path does not slip, remaining almost dry, so you can walk along it completely freely.

Get the right amount Tire stations and service stations will help you find tires. Since truck tires are wider, it is better to choose them.

Preparing tires for the device

Those who like this idea can use tires or tiles made from them to create paths. Preparation begins with separating the tread, i.e. circumcising the side part.

To do this, use a powerful and sharp knife, which is periodically dipped into lubricant(soap, oil). To prevent jamming, a pry bar is inserted into the hole formed behind the knife.

After the sides are cut, there is a rubber band.

When its quantity corresponds to the area of the future path, proceed to preparing the base for laying, consisting of 3 layers:

compressed soil;
crushed stone;
cement and sand, taken in a ratio of 3:1.

The area under the path is abundantly moistened and compacted.

At the next stage, the tapes are aligned and attached to the boards or bars. The edges are secured with nails, and if there are several stripes in the path, then they are laid with a gap of 1-2 centimeters. This is done so that the grass that appears soon will additionally fix the products. It is recommended to make a recess at the place where the rubber and board are attached so that your feet do not cling to the edge. That's all - the exclusive path is ready!

Puzzles for paths

No less practical and easy to use is a path made from rubber puzzles, which allow you to change its inclination and direction. It looks more impressive than those made from rubber tires, but it requires financial expenses to purchase rubber tiles.

You can use boards, but they are uncomfortable to walk on. On paths made of linoleum it is easy to slip, but slate can easily crack. Therefore, the most the best option are tracks made from tires.

Tire steps

If the site has uneven terrain, it is rational to equip not a path of tires, but a staircase. For heavy loads, they are installed in two rows. In installation, this design is no more complicated than laying rubber. At the same time, there will be stairs on the site original element design.

Tires are placed on the ground, starting from the bottom and gradually moving up. For better fixation, the wheels need to be dug into the ground and filled with soil.

The advantages of an unusual staircase include less stress on the joints during ascents and descents, and pleasant shock absorption.

Do-it-yourself sandboxes made from tires

All children enjoy playing in sandboxes. It's very easy to make them, having car tires, whose service life has expired.

Today you can often find in parks and playgrounds all kinds of bright sandboxes created by the hands of creative parents.

Tires are valuable because they are easy to attach with the simplest tools on hand:

small and large sharpened knives;
wire for staples;
nails.

You also need to buy different colors of paint and find tires of different diameters.

Sandboxes can be made from one tire or several.

To make them you need:

rubber hose;
tire or several;
a knife with a sharp, powerful blade;
shovel;
paints;
sand.

For the baby's future play area, it is necessary to dig a hole, the diameter of which should not exceed the size of the tire. The tire is cut so that the upper part is free.

A rubber hose, previously cut in half, is placed on the cut-off part, which will protect children from injury. After painting the sandbox in bright colors and letting the paint dry well, add sand and “open” a wonderful place for the children to play. They will be protected from the bright sun by a beach umbrella fixed in the center.

Video: DIY tire sandbox

Sandbox “wavy”

Several children can play in it at once.

To create it you will have to stock up:

several small tires of the same diameter;
round frame;
glue, screws, nails;
with a knife;
sand.

Disposal of old tires is a problem that has reached unimaginable proportions today. The fact is that recycling plants require payment for accepting wheels, and our people are not used to paying for their own garbage. Eventually? all tires that have become unusable are lying in ravines along the roads. Wherein? rubber is a material that does not decompose. In today's article we will look at 5 unusual and practical ways to use old tires, which will allow home handyman use the material to its advantage.

You can make a lot of beautiful and beautiful things out of tires. practical elements decor for your site. In addition, some are made from them, which can be placed outdoors (it is not afraid of precipitation or direct Sun rays) or even in . Such material makes very beautiful flower beds, and if there are a lot of tires, then you can even make it green. Children will not be left out either: tires are used to make various swing and other elements. Let's take a closer look at everything possible options using old wheels.

Flower beds made from used wheels: types, manufacturing options

Making furniture from used tires

If you put one wheel on top of the other and fasten a cut-out plywood, OSB or circle on top, you get a seat. We put foam rubber on top of the plywood and cover the structure with fabric. You can also attach plywood to the bottom (on) and screw the wheels from the old chair to it. This can even be placed inside a country house.

Also, using your imagination, you can cut out the armrests, make seat backs, decorate the table beautifully and paint all this splendor from an ordinary spray can (it is better to use automotive nitro enamel, which dries quite quickly). The result can exceed your wildest expectations. Below are examples of such work done by home craftsmen with their own hands.

Old car tires look no worse than designer ones - it’s not a shame to put one like this inside a house:

1 of 6

It is difficult to imagine a person who has not seen crafts made from car tires. Agree, many of them are made with talent and leave no one indifferent. Why not try to create something with your own hands from old tires? High-quality work will find a place in the summer cottage, in the garden, in the yard.

From snails on the ground to birds in the sky can be made from tires

Old tires are worthless, but they can be made into quite large, colorful and useful crafts who are not afraid of bad weather. You can make flower beds from car tires, country furniture, toys for the playground, funny figurines of animals and birds, useful household items and even a children's car.

Simple crafts require little time and a minimum of tools. Here is a list of what is enough for most ideas.

In addition to the above, worn tires are used for the construction of foundations and houses. Fences are built from them. We follow the content.

The most important: crafts from tires for the playground

For an old wheel, both sand and water are familiar environments

Have no doubt: everything that is done for children is the most important! In the simplest version, you need to pour sand inside big wheel- and you get a sandbox. A painted wheel, and even with a pattern, will decorate the site. We install an umbrella in the sand and get an option for little VIPs. For them, we put insulation on the inner rim of the tire for water pipes so as not to get scratched.

Small tires will also work. They can be fastened together with self-tapping screws. The protruding part of the screw must be screwed into a piece of wood so that no one gets hurt.

A mini pool made from a large wheel is a well-known thing. Small master class for making a swimming pool:

The bead on one side of the tire is cut off. It is better to do the work with a jigsaw.
They dig a pit with a depth of 20 cm and an area slightly larger than the outer dimensions of the wheel.
Sand and crushed stone with a total thickness of at least 10 cm are placed in the pit.
Poured cement mortar in a ratio of 1:3.
The tire is placed on the thick solution and further filled with the solution so as to cover the inner rim of the wheel. A layer of mortar with a total thickness of 20 cm will not crack.
After the solution hardens, the internal and external surfaces are painted. Blue paint is suitable the best way. It is better to prime the pre-painted surface.
After the paint has dried, the pool can be filled with water.

Your version of the swing may be different

The swing is a sacred thing. No one will become Gagarin, but all family members will enjoy the swing. At the hardware store you will need to purchase a chain, hooks for hanging, carabiners for connecting the chain, screws, washers and nuts M6, M8 for forming the seat.

Screws must be of the optimal length, with a semi-countersunk head or a hemispherical head. It is better to use decorative cap nuts. Screws that are too long must be cut off.

If the above conditions are met, the product will be as safe as possible. In the photo below there are options in which only rope was required.

Personal swings, as well as for two or more children

It's even easier to make a rocking chair on the ground. It is better not to cut the tire in half, but to leave protrusions for attaching to the board with self-tapping screws. Keep in mind that a soft wheel will sag, so the stiffness of the tire will limit the weight of those who can use the swing.

A board treated with sandpaper will protect your children’s sensitive areas from splinters. The painted product will impress the neighbors. It is better to place the handles across the board. They must have big sizes so that the child's hand does not get stuck under the handle when falling. If you don’t walk around the dacha at night, you can attach decorative eyes to the swing.

A rocking chair for one child can have a base of more than simple shapes. Not everyone has an old bicycle handlebar and can be replaced with a shovel handle.

A car, a tractor and a tank are all made from old wheels

The number of places and the limits of imagination are unlimited

I think that one of these cars will be able to distract your child from the TV. For a car, in addition to worn wheels, you will need a steering wheel. Unnecessary disks, hubcaps and headlights are present in almost any garage and will be happily used for useful purposes.

In the simplest version, a regular board laid on a tire is suitable as a seat. Broken plastic chair will allow you to create a Schumacher car. The most important thing is not to skimp on paint and imagination when working with the model.

There is no arguing about tastes when we're talking about about the future tractor driver and general

Nothing prevents you from building both a tractor and a tank from tires. Discuss the design idea with your child and include him in the creation process.

Furniture for adults and children at their summer cottage

“Indestructible” furniture for the garden

Such furniture can definitely be left in the garden. Rain won't ruin it; it's easier for attackers to do their part than to carry heavy loads. If you drill holes and thread a weather-resistant cord through them, the result will be original and reliable. Several round pieces of wood can be cut from thick branches. Then they should be cleared of bark, the ends should be sanded and varnished. We twist everything with self-tapping screws and get a chair and a table.

The simplest thing is to lay the tires on top of each other and cover them with sheets of moisture-resistant material, such as OSB. Surfaces coated with moisture-resistant glossy varnish will be protected from moisture, will not get dirty, and can be easily wiped clean from dust. To prevent the tires from moving, they can be fastened with self-tapping screws.

Another step towards perfection - soft seats and backrests. It is convenient to cut the bases of such parts from plywood. Foam rubber 2-5cm thick is placed on them and covered furniture fabric. The fabric is wrapped and stapled to the plywood using a staple gun.

Comfortable armrests are made from motorcycle tires. In this case, the armrests and backrest are fastened with screws, washers and nuts M6, M8. As already mentioned, screws should be used of the optimal length, with a semi-countersunk head or a hemispherical head. It is better to use decorative cap nuts. Screws that are too long must be cut off.

The bases and backs of the seats, as you can see in the photo, can be made from tread strips. The strips are intertwined and attached to the inside of the tire rim. In this case, you can do without screws if you screw self-tapping screws of the optimal length into the tire so that they do not protrude.

You can’t forbid living beautifully: the simple and the complex are side by side

Useful on the farm

This homemade product won my heart so much that I did not regret five minutes of working with a jigsaw for it. The photo shows the technical process and the result.

A convenient hose container can be made in five minutes

It is difficult to remain indifferent when the possibility of using worn tires on the farm is obvious. Judge for yourself:

If you insert a plastic basin of a suitable diameter into a car tire, you will get a wonderful sink for your garden.
Several tires stacked on top of each other in a hole will serve as a long-lasting toilet container. It is recommended to first pour sand and crushed stone into the bottom of the hole.
Tire treads will perfectly cope with the role of paths in the garden. Tread strips cut from old tire, are fastened together using a board and self-tapping screws.

Wheels no longer run, now they walk on them

Funny, cheerful figures for everyone

Tire figures impress with their colorfulness, originality, and size. We have already told you how to make a palm tree from plastic bottles. You can also make a palm tree from old tires. You can place a giraffe next to a palm tree in the garden.

This palm tree and giraffe are not afraid of frost

By burying an old wheel partially in the ground, you can make almost any animal. Adding various attributes to decorate your craft is welcome. The most important thing is not to limit your imagination in using paints.

A wheel buried in the ground easily turns into any animal

Combining several tires different sizes By cutting and bending the material in all directions, using bold colors, you can create a lot of crafts from old tires that will make you smile. You just have to take it and try it, since the source material can be spoiled as much as you like. It is convenient to apply the cutting pattern to the rubber with chalk or a marker.

All tire crafts are equal - flamingos, snails and elephants

Figures the size of a man can be easily made from worn wheels. They are good in the yard, behind the fence, and on the playground. To mount the wheels on top of each other, it is convenient to use a piece of reinforcement or metal pipe, driven into the ground. It is important that the rod passes through both tires to the entire height of the craft. It is convenient to cut flat circles from plywood, OSB, plastic and even linoleum. Any material can be fastened with self-tapping screws.

Such human-sized figures can be seen a mile away.

Wide scope for imagination from old wheels: from fish to minions

Rubber swans and dragons do not shy away from each other

We wish you creative success in creating a new craft from old tires with your own hands! Let the video help you.

Almost any summer cottage allows you to realize the most various ideas. So, you can use convenient paths made from old tires as decorative elements. There is no need to rush to throw away things that have become unnecessary; you can restore these items and bring something new and original.

An example of a garden path made from tires

DIY tracks made from old car tires will be a unique addition for anyone. Moreover, their use can be completely diverse. From car tires you can make an original frame for the following various garden elements:

or flower beds;

It should be noted that most owners country houses people will be very willing to build garden paths from car tires, due to the fact that this method is not overly labor-intensive and costs virtually no large financial investments. By the way, to independently improve garden paths you will need to use not the entire surface of old tires, but only a certain part of it - treadmill, the so-called protector.

Garden paths made from cut tires

To make such a high-quality decorative element in your garden with your own hands, absolutely any old tires are suitable, but it is best to use those left over from trucks. Their use will significantly increase the width of the future convenient garden path, but at the same time you will need much less tires than if you used car tires from passenger vehicles.

Moreover, this will in no way affect the quality of the future path, but it will allow you to reduce the time spent on the external improvement of your site. There are several reasons why it is recommended to use rubber from old car tires:

Manufacturing process

It should be clarified that all required material for such a track it will be absolutely easy to obtain.
The easiest way to do this is step by step:

After you have built such a garden path with your own hands, it will be advisable to walk along it several times, which will allow you to better press the boards with ribbons into upper layer soil. In order for the coating to lie well, the ground underneath must first be leveled.

For this purpose, you will need to carefully remove a small top layer of earth, and fill the resulting area with fine gravel or pour regular concrete. When the blank for such a path is completely ready, you can spread the rubber coating you made for the garden on it. When laying rubber bands from car tires, it is not at all necessary to lay them directly on the ground layer.

We nail the rubber onto a special board

Using ordinary nails, they can be carefully nailed to wooden beam or boards, and only then carefully lay them out on the garden path.

Moreover, if you do not place the car tires close to each other, but leave a small gap of 1-2 cm wide between them, then new grass will soon grow through such cracks.

This will look very nice and will also prevent the rubber bands from car tires from moving to any side in the future. If you do not have your own truck, then the tires necessary for the garden path can be purchased absolutely free. For example, qualified technicians from all kinds of tire shops will most likely be only happy if you help them get rid of unnecessary material.

The use of decorative paths from tires

In addition to the above-mentioned areas for using such tapes from car tires, it would also be advisable to use them in the following places in a suburban area:

Personal parking road transport on the territory of a personal plot;
Path at the entrance or entrance to your yard;
A place used for washing cars, bicycles or scooters;
A utility yard with various buildings, the passages between which can be lined with similar high-quality decorative paths made from car tires.

Similar coverage on site country house, built with your own hands, will not only look very harmonious in natural design, but will also be distinguished by its special practicality during operation.

Option for constructing a garden path from tires

In addition, this coating itself is absolutely non-slippery, which makes the chosen solution more than rational, especially if your family has small children or elderly people. In the spring, when the snow melts or at any other stormy time of year with heavy rainfall atmospheric precipitation Often there are certain problems with access to a summer cottage. This problem can also be solved by using rubber bands.

It is necessary to spread them on the most problem areas and any car can drive through them completely unhindered.

It is also worth noting that it will not be superfluous to carry with you a small amount of similar tapes in the trunk of your car. They can always be useful to you in case of the most unforeseen circumstances, allowing you to get rid of unnecessary manipulations with a shovel and the need to place boards under the wheels if your car cannot drive off-road.

Such interaction of rubber with rubber will ensure almost caterpillar cross-country ability of vehicles. Another, less known, but rather eccentric use for old car tires is to use them as country buildings. Since this material can be given a semi-cylindrical shape, just like tiles, it can be laid in a completely similar way.

Naturally, for the main country cottage this option is not suitable, but, say, or this is more than profitable solution, because with the help of old car tires you can build with your own hands an almost eternal water-repellent roof that can withstand any bad weather.

This is what a cottage roof made from car tires looks like

If the decision to create such a decorative element from car tires on your summer cottage has already been made, then you can choose from two possible options:

Use rubber bands from tires (the method for obtaining them is described above);
Use rubber tiles, which are essentially recycled tires.

Both of these options are equivalent in their execution. Rubber belts from car tires and rubber tiles They have exactly the same characteristics and similar durability.

To create an expressive appearance, a flowerbed needs a border designed to clearly indicate the boundaries of the structure. An unusual solution in this situation are old car tires, which car owners throw into landfills as unnecessary, simply polluting the environment. A product made with your own hands from a used tire will not only help protect environment, but it will also become spectacular decoration flower beds in your garden plot.

Peculiarities

Flower beds made from used tires have many advantages:

Even a consumer with an average income can afford to plant a flowerbed in his summer cottage or under the windows of his house, because worn-out tires do not represent any material value. The used material can probably be found among fellow car owners who dream of getting rid of old tires. For them it is garbage, but for an amateur landscape designer it is the basis of a future masterpiece.

Used tires no longer have their original rigidity, so they can easily be processed. When decorating, a small set of tools is used: chalk, a sharp knife or jigsaw, and a can of paint. The simplest garden structure does not require any processing - the tire is placed on the ground and filled with soil.

The rubber garden accessory is known for its durability: it is not afraid of moisture, does not rot, and is not afraid of bacteria and fungi. The likelihood that it will crack from mechanical shock or severe frost is too small. But even in this case the situation can be solved - old tire easily replaced with another.

A flower bed made from waste tires is a compact, mobile structure that is not difficult to transport and can easily change location. Nothing prevents you from transporting it even to another city, you just have to remove the old soil.

Tires are characterized by the ability to transform. Even unique flower beds, created with love with your own hands, can become boring over time. A simple way to correct the situation is to repaint the product. Using spray paint cans you can endlessly vary the color scheme, constantly changing the surroundings of your garden plot.

A flower bed made from a used wheel is always a win-win option for landscape design. This material allows you to show creativity, express yourself, show your artistic potential.

The products have no significant disadvantages. But adherents of classicism do not favor them: some demand something more familiar and elegant, others do not want to waste time on making decorative compositions.

The disadvantages include the flammability of the material, but subject to fire safety this fact is immaterial.

How can I do it?

To create the simplest flower bed from an old wheel, you don’t need step-by-step instruction– just pour soil into the tire, and the flowerbed is ready. But even such a trivial thing can be made beautiful, given character and some “flavor” added.

To create an elegant flowerpot from tires, just make leaves or petals of different sizes along the edge:

For this, the inner edge rubber wheel it is cut out in a zigzag or wave shape, then the product is turned inside out, sanded and coated with the desired paint.
But first, they mark out the future shape of the flowerbed, applying the ornament with chalk. At this stage, you should give free rein to your imagination and draw any ornament you like.

What to cut with?

After marking the pattern, you need to trim the tire for the future flower bed. This is the most time-consuming part of the job. To do this you will need a sharp knife, jigsaw or grinder. It takes a little longer to cut with a knife, but the grinder melts the rubber and adds an unpleasant aroma.

To increase the glide of the knife blade, it can be lubricated during the cutting process. liquid soap. The use of jigsaw, which allows you to cut out even the most complex shapes.

You can get injured when cutting, so be sure to use special gloves and safety glasses. It is better to work on a hard, wide surface: a stable table or a piece of plywood laid on the ground.

A respirator will save you from the abundance of rubber dust for which Chinese tires are famous.

You need to cut the pattern strictly along the intended line, then the product will turn out smooth and beautiful. The cut out part is not thrown away; it can be used as a base for a stand or a border for a miniature flower garden.

How to turn it out?

To turn a wheel, you need to lay it cut side down, grab the cut edge and try to turn it inside out. It is important to at least start by manipulating a small part of the tire. Further the process will go easier - each part will carry the next one along with it. This job requires a certain amount of physical strength, and girls here will have a hard time.

How to color?

The process of decorating a tire is the most enjoyable stage in manufacturing; it requires preliminary preparation. The surface of the future form is carefully polished to smooth out roughness and other defects. Then the rubber blank is washed to remove fine dirt and dust stuck in the protectors and degreased with solvent or white spirit. Only after this do they start painting.

You can paint wheel tires:

brush;
spray bottle;
from a can.

Using a brush allows you to paint even the most difficult to reach areas on the surface, including the spaces between the protectors. This method is effective, but takes a lot of time. Using a brush, they also create more subtle, elegant patterns, emphasizing the details and shapes of the product.

The sprayer guarantees uniform distribution of the dye. The advantage of this coloring is the absence of drips and brush marks. The paint consumption in this case is slightly higher than in the previous version.

It is most convenient to do this with a spray can, but this method is the most expensive.

Enamel, oil or nitro paints are used as coloring solutions. The paint is applied not only to the outside, but also to the top 10-15 cm inner surface. It is better to use a layer of white as a primer and only after that apply a colored layer: this way the finishing color will be brighter and more even.

After painting, you need to dry the workpiece in the sun for several days.

When painting tires, you should follow several rules:

when choosing light shades for the border of a flower bed, the soil inside it will not overheat along with the roots of the plants;
there is no need to apply a thick layer of paint, otherwise it may crack, especially in frosty winters or scorching summer heat;
a too colorful flowerpot ornament can distract attention from the flower arrangements themselves.

Color palette selected according to the design concept of the garden:

metallic silver will turn a rubber tire into a glamorous steel vase;
green color will disguise decorative element on a green lawn;
Bright, eye-catching shades will allow you to add accents to your garden plot.

The shape can be left monochromatic or a pattern can be applied using a stencil, decorated with a stripe or a pattern that imitates brickwork, checkerboard - the variety of ornaments provides enormous opportunities and scope for the flight of imagination of landscape designers.

Where to place it?

Regardless of the location of the structure, a flowerbed made from an old wheel always looks impressive and attracts attention. Fancy figures from tires can be made to decorate the yard, placing them in the front garden at the entrance or on the playground; they look good in the courtyard of a private house or in the country.

Flowerbeds are installed directly on the ground or on special stands, hung on walls and trees as flowerpots, and made into pyramids and other complex structures.

If there is a strong fence or a blank wall near the house, you can arrange a flower garden on them by hanging tires on cables or chains. The space inside is filled with earth, suitable flowering plants. Holes are made in the rubber so that there is somewhere for excess water to drain. The bottom of the flowerpot is covered with drainage - small pebbles and sand are enough.

This version of the flower bed is relevant for verandas or gazebo walls.

Design examples

Original ideas How to make your own flowerbed from old tires, quite a lot. Everything that your creative imagination is capable of in creating a flower garden has the right to exist.

The main thing in landscape design personal plot - decorate everything in the same style:

Tires placed on top of each other in a checkerboard pattern can serve as a flowerbed. Such a fence will not only be a wonderful decoration for the yard, but will also allow you to zone the space around the house.

A composition in the form of a children's pyramid is made up of several wheels. different diameters. The top is often a miniature decorative wheel or flower pot.

A lot of old tires make a good structure in the form of a “flower mountain.” The composition does not require cutting and turning the tires, you just need to paint and assemble them into in a certain order. At the base of the mountain there are 6 wheels, on them – 5, then – 3, and the composition is crowned with one small tire.

The car tire can be used in a vertical position. To do this, screw it using a screwdriver to wooden wall by mailbox type. They will look impressive in it climbing plants or blooming nasturtium and petunia.

Old tires can take on the appearance of any animals and birds, insects and other fauna. The theme can be dishes or household items, cartoon characters, architectural monuments, floral motifs.

Flowerbed in the form ladybug or a cup of coffee, funny Minions or the Leaning Tower of Pisa - nothing is impossible for flexible rubber material.

Flowerbed-daisy

If the space of your personal plot allows, you can make a flower bed in the shape of a flower. The design requires 4 tires, 3 of which must be cut crosswise into two parts - they will become the petals of the future chamomile. The whole tire will be the center of the flower, around which you need to lay the petals.

The tires are dug 5-6 cm into the ground. All blanks are first painted in bright, positive shades. Petals can be in one color scheme, and alternate between each other in 2-3 colors.

An extraordinary addition to the pattern can be glued glass pebbles; on a flower-shaped flowerbed, such decorative elements will resemble frozen drops of dew, which will greatly enliven the design.

Decorative well

Even those who do not have special artistic skills and rich imagination can construct such a flower garden. A well made from tires does not require much time and special costs, but will look impressive in landscape design.

Such a decorative object will harmoniously complement the cozy atmosphere of the courtyard of a private house, and bright design designs will highlight the beauty of garden flowers.

For the design you will need three old tires same size. In each of them, slots are made on opposite sides with a sharp knife in order to subsequently insert support posts for the roof. The poles can also be installed with outside tires, which makes the work much easier.