Many people are now starting to leave cities for nature. And often they have a problem with electricity. They begin to look for alternative sources of electricity and most of them turn out to be solar panels (especially since their characteristics have now significantly improved). There are many videos on the Internet today with magnetic fuel-free generators and many people want to have them.
Meanwhile, an enterprise has already appeared in Russia that has launched tact generators into mass production and their price is quite reasonable.
Now the company already sells many models of fuel-free single-phase generators from 1 to 100 kW at 220 volts at different prices. Acceptable noise level is 40 dB. with overload protection and zero sine wave distortion. The generator is started from batteries. The analysis showed that such a generator pays for itself in 2 years. The declared service life of this device is 10 years. As I understand it, during this period it is possible to repair the electric motor (bearings will have to be changed at least once every few years), replace some radio components, repair the rotor, etc. That is. In case of problems, the cost of repairs is not significant and is quickly recouped.
If fuel-free generators are magnetic, as the manufacturer claims, then the magnets tend to demagnetize and after 15 years they will have to be changed, and maybe earlier. Magnets are most likely the most expensive element in a generator. Perhaps this is why the stated service life of the device is 10 years.
All this is very good and may this enterprise develop successfully. After all, this could radically change the economy. Now you can abandon power lines, heating mains and not depend on public utilities. Free heating of the house and year-round greenhouses is now becoming possible. This company has been operating for several years. However, for some reason there are no reviews on the Internet about the plant’s products on third-party sites. Why? After all, this is a revolution in science and hundreds of people should purchase such generators. We provide a link to the website of the manufacturer of fuel-free generators - ( link removed, read on). Watch, study. We will be glad to receive information on this topic in the comments.
Attention!!! According to the latest information, this enterprise is fraudulent. They take money in advance, but do not ship the goods. Be careful! Read the comments below and if you have something to say, leave a comment. People will be grateful to you.
Update from 02.14.16
A video with a homemade similar fuel-free generator was found on YouTube. The author's video has been deleted; it is a re-uploaded video from another person.
Sall S.A. — Why aren’t fuel-free generators introduced?
Update from 12/21/16
Several people have already sent money for the purchase of generators, and that’s all. Nobody sent any generator. Don't fall for scammers' tricks . Although there were many warnings in the comments.
Well-known classical methods of generating electricity have one significant drawback, which is their strong dependence on the source itself. And even so-called “alternative” approaches that make it possible to extract energy from natural resources such as wind or solar rays are not without this drawback (see photo below).
In addition, traditionally used resources (coal, peat and other combustible materials) sooner or later run out, which forces developers to look for new options for generating energy. One of these approaches involves the development of a special device, which among specialists is called a self-powered generator.
Operating principle
The category of generators that use self-powering usually includes the following names of original designs, which have recently been increasingly mentioned on Internet pages:
- Various modifications of the Tesla free energy generator;
- Vacuum and magnetic field energy sources;
- So-called “radiant” generators.
Among fans of non-standard solutions, much attention is paid to the famous circuit solutions of the great Serbian scientist Nikola Tesla. Inspired by his proposed non-classical approach to using the capabilities of the e/magnetic field (the so-called “free” energy), natural scientists are looking for and finding new solutions.
Known devices, which, according to the generally accepted classification, belong to such sources, are divided into the following types:
- The previously mentioned radiant generators and the like;
- Blocking system complete with permanent magnets or transgenerator (its appearance can be seen in the figure below);
- So-called “heat pumps”, operating due to temperature differences;
- A vortex device of a special design (another name is the Potapov generator);
- Electrolysis systems for aqueous solutions without pumping energy.
Of all these devices, the rationale for the principle of operation exists only for heat pumps, which are not generators in the full sense of the word.
Important! The existence of an explanation of the essence of their work is due to the fact that the technology of using temperature differences has long been used in practice in a number of other developments.
It is much more interesting to get acquainted with a system that operates on the principle of radiant transformation.
Radiant Generator Review
Devices of this type work similarly to electrostatic converters, with one slight difference. It lies in the fact that the energy received from the outside is not all spent on internal needs, but is partially given back to the supply circuit.
The most well-known systems operating on radiant energy include:
- Tesla transmitter-amplifier;
- Classic CE generator with expansion to blocking system BTG;
- A device named after its inventor, T. Henry Morrey.
All new generators invented by fans of alternative methods of energy production are capable of working on the same principle as these devices. Let's look at each of them in more detail.
The so-called “transmitter-amplifier” is made in the form of a flat-plate transformer connected to an external energy source through an assembly of spark gaps and electrolytic capacitors. Its feature is the ability to generate standing waves of a special form of e/magnetic energy (called radiant), which propagates in the environment and practically does not weaken with distance.
According to the inventor himself, such a device was to be used for wireless transmission of electricity over long distances. Unfortunately, Tesla was unable to fully implement his plans and experiments, and his calculations and diagrams were partially lost, and some were later classified. The generator-transmitter circuit is shown in the photo below.
Any copying of Tesla's ideas did not lead to the desired result, and all installations assembled according to this principle did not provide the required efficiency. The only thing we managed to achieve was to make a device with a high transformation ratio with our own hands. The assembled product made it possible to obtain an output voltage of the order of hundreds of thousands of volts with minimal electricity supplied to it.
Generators CE (blocking) and Morrey
The operation of CE generators is also based on the radiant principle of energy conversion, obtained in the self-oscillation mode and not requiring constant pumping. After it is started, recharge is carried out due to the output voltage of the generator itself and the natural magnetic field.
If the product you made yourself was started from a battery, then during its operation the excess energy can be used to recharge this battery (figure below).
One of the types of self-powered blocking generators is a transgenerator, which also uses the Earth’s magnetic field in its operation. The latter affects the windings of its transformer, and this device itself is simple enough that you can assemble it with your own hands.
By combining the physical processes observed in CE systems and permanent magnet devices, it is possible to obtain blocking generators (photo below).
Another type of device discussed here belongs to the oldest versions of the free energy generation scheme. This is a Morrey generator, which can be assembled using a special circuit with diodes and capacitors connected in a certain way.
Additional Information. At the time of his invention, capacitors in their design resembled the then fashionable electric lamps, however, unlike them, they did not require heating of the electrodes.
Vortex devices
When talking about free sources of electricity, it is imperative to touch upon special systems capable of generating heat with an efficiency of more than 100%. This device refers to the previously mentioned Potapov generator.
Its action is based on the mutual vortex influence of coaxially acting liquid flows. The principle of its operation is well illustrated by the following figure (see photo below).
To create the required water pressure, a centrifugal pump is used, directing it through the pipe (2). As it moves in a spiral near the walls of the housing (1), the flow reaches the reflecting cone (4) and is then divided into two independent parts.
In this case, the heated external part of the flow returns back to the pump, and its internal component is reflected from the cone to form a smaller vortex. This new vortex flows through the internal cavity of the primary vortex formation, and then enters the outlet of the pipe (3) with the heating system connected to it.
Thus, heat transfer is carried out due to the exchange of vortex energies, and the complete absence of mechanical moving parts provides it with very high efficiency. It is quite difficult to make such a converter with your own hands, since not everyone has special equipment for boring metal.
Modern models of heat generators operating on this principle try to use the phenomenon of so-called “cavitation”. It refers to the process of formation of vaporous air bubbles in a liquid and their subsequent collapse. All this is accompanied by the rapid release of a significant amount of thermal substance.
Electrolysis of water
In cases where we are talking about new types of electric generators, we should not forget about such a promising direction, which is the study of the electrolysis of liquids without the use of third-party sources. Interest in this topic is explained by the fact that water is inherently a natural, reversible source. This follows from the structure of its molecule, which, as is known, contains two hydrogen atoms and one oxygen atom.
During the electrolysis of water mass, corresponding gases are formed, which are used as complete substitutes for traditional hydrocarbons. The fact is that when gaseous compounds interact, a water molecule is again obtained, plus a significant amount of heat is simultaneously released. The difficulty of this method is to ensure that the required amount of energy is supplied to the electrolysis bath, sufficient to maintain the decomposition reaction.
This can be achieved if you change the shape and location of the electrode contacts used, as well as the composition of the special catalyst with your own hands.
If the possibility of exposure to a magnetic field is taken into account, then it is possible to achieve a significant reduction in the power consumed for electrolysis.
Note! Several similar experiments have already been carried out, proving that, in principle, it is possible to decompose water into components (without additional pumping of energy).
All that’s left to do is master the mechanism that assembles atoms into a new structure (re-synthesizes a water molecule).
Another type of energy transformation is associated with nuclear reactions, which, for obvious reasons, cannot be carried out at home. In addition, they need enormous material and energy resources sufficient to initiate the process of nuclear decay.
These reactions are organized in special reactors and accelerators, where conditions with a high magnetic field gradient are created. The problem that specialists interested in cold nuclear fusion (CNF) face is finding ways to maintain nuclear reactions without additional input of third-party energies.
In conclusion, we note that the problem with the devices and systems discussed above is the presence of strong opposition from corporate forces, whose well-being is based on traditional hydrocarbons and atomic energy. CNF research, in particular, has been declared a wrong direction, as a result of which all centralized funding has been completely stopped. Today, the study of the principles of obtaining free energies is supported only by enthusiasts.
Video
A simple DIY ethereal fuel-free generator for your home or car. It couldn't be simpler. Scheme for home screwdriver assembly. Guarantee that you will collect 100%. The Internet is full of such offers.
If people suddenly begin to become intensely interested in free energy generators about whether to buy them or make them themselves, it means that somewhere there has been a massive power outage. Original but true. Interest in BTG peaks during floods, glaciations and other disasters. Basically when it's already too late. And in this respect, a German is no different from a Russian.
It is, of course, advisable to prepare for the end of the world in advance, while there is still electricity in the outlet and that means there is somewhere to plug in a soldering iron. The ethereal generator is not entertainment, but the harsh prose of life. It's a pity that few people understand this.
It is no less difficult to understand how to make this same BTG. Everyone talks about it, but few have seen it, and those who have touched it with their own hands cannot be found even during the day with fire. This happens not because fuel-free devices do not exist according to the school laws of physics, but because the interests of seekers of free energy to talk dry up exactly after the structure is assembled and working. Further, all the questions of those interested have approximately the same answers: why did you give in to me, so that I can share the details with someone. Think for yourself, suffer as much as I did over buckets of burnt parts, grow old with a soldering iron in your hands, ruin your health like I did, and maybe something will work out.
This seems unfair, but believe me: as soon as your generator starts working, you will become the same beast and will not want to share with anyone. Even with close relatives. Because your Be-Te-Ge is your pass to the class of SE-schniks. The world will become completely different, values and priorities will change, and there will be a desire to distance yourself from the crowd of fools and power structures. You will simply understand that you can do without everything that surrounds you. Gain spiritual freedom and reduce material dependence.
Moreover, the environment greatly contributes to enlightenment. Occasionally, copper pipe enthusiasts come along wanting to stake their names in granite and start shouting loudly about their achievements. Then they suddenly fall silent, and memories of them quickly become overgrown with spam from ungrateful contemporaries.
If we speak in allegories, the free energy of the ether is a sphere where no one will give the sufferer not only a fish, but even a fishing rod. They can give you a hook, a float, and a fishing line. They will give it in the hope of a person’s self-development. And then it very quickly becomes clear to whom it was given. If in response you give nothing but demands for more, then the person is not the same. And he will remain with his hook, multiplied by his own ambitions, but without a generator, and will stir up trouble on the forums, and will lead many with him to nowhere, even if they have golden hands.
You also need to have a cast iron head. Not in the sense of empty, but in the sense of strong, capable of breaking through barriers and not sensitive to sentimentality. A man began to make a generator. His beloved cat died, someone he cared about fell ill, and some other misfortune happened (he was fired, underpaid, overextended). A person begins to understand that this is a punishment from above for trying to touch the forbidden. And throws the generator. That happens. And this is also a kind of selection.
Among scientists there are believers in God. Among the SE people there are only believers in broadcasting. The SE student is higher in level of development, although not necessarily smarter.
You may be disappointed that this article is not about circuits for DIY assembly. But without knowing what it is impossible to collect. First, decide what to collect. There are many schemes, and one more will not give you anything. Learn to see the main thing in diagrams. Filter. Then you will understand that the scheme itself does not mean anything. It is like writing on the walls of a cave. Something is drawn, but what? Interpret how much imagination you have. It won’t work that way. Over-unit physics is a strict science; it does not allow free interpretations.
You simply must understand the basic principles: the structure of the microworld, electrical phenomena, fields. It’s not about memorizing formulas, but understanding how everything works. Otherwise, nothing will come of it. Even if you find an over-unit, you will quickly lose it. Here you can list well-known nicknames: Tigra, Vasmus, Shark, Nosferatum, etc. Kulabukhov, Alekseev, Grits, etc. - with varying success.
BTGs are done in silence, without noise and dust. If you want to make a fuel-free generator in order to talk about it on forums or make a video, this is an empty goal. You can tell and film it this way. To drive away the wave is a matter of technology. But the wave will die out under the pressure of other wave blowers, and nothing will remain. Don't waste your time. Just do BTG. You will need it in the coming years.
Many of us like to save money, so when we come across an advertisement on the Internet about the sale of a fuel-free generator (BTG), our hands reach for the “place an order” button. But will such a miracle device really help you save money?
What do fuel-free generator manufacturers promise?
On the Internet you can find various sites that offer to buy BTG, and for quite a lot of money (on average - 12 thousand rubles). Moreover, each seller explains the principle of operation of the mechanism in his own way. Some say that a fuel-free generator operates on some kind of “earth energy”, for others the source is ether, and others talk about static energy, which does not obey the known laws of physics, but is quite real.
IMPORTANT! The theory of the ether was relevant until the beginning of the twentieth century, until in 1910 Einstein refuted it in his scientific article “The Principle of Relativity and Its Consequences in Modern Physics.”
In fact, BTG is a beautiful invention, and similar devices do not exist in nature.
However, for those who are new to physics, the explanations about the ether and “earth energy” are quite enough to buy an expensive but useless generator.
Is it possible to make a fuel-free generator with your own hands?
If you are still in doubt, try assembling such a generator yourself. There are many different schemes on the Internet for collecting BTG at home. Among them, there were two fairly simple methods: wet (or oil) and dry.
Oil method of collecting BTG
You will need:
- AC transformer – necessary to create constant current signals;
- Charger – ensures uninterrupted operation of the assembled device;
- Battery (or regular battery) – helps accumulate and conserve energy;
- Power amplifier – will increase the current supply;
The transformer must be connected first to the battery and then to the power amplifier. Now a charger is connected to this design, and the portable BTG is ready!
Dry method
You will need:
- Transformer;
- Generator prototype;
- Undamped conductors;
- Dynatron;
- Welding.
Connect the transformer to the generator prototype using undamped conductors. Use welding for this. A dynatron is needed to control the operation of the finished device. Such a generator should work for about 3 years.
The success and effectiveness of these designs largely depends on your luck. You will also need it to find all the necessary elements specified in the instructions. But you probably already guessed that all this is unlikely to work.
Who led the development of the free energy generator
Adams generator
In 1967, a patent was received for the production of this generator. The BTG turned out to be working, but the power it produced was so small that it would hardly be possible to provide energy to even a small room with its help.
But scammers don't care. Therefore, on the Internet you can find sites selling the Adams generator. But why spend money on a device that won’t help you save money?
Tesla Generator
The life and work of the famous scientist have long been overgrown with various inventions. Nobody knows for sure which of them is true and which is fiction. And this has become an endless source of inspiration for swindlers.
Nikola Tesla really tried to invent a special device. Not a fuel-free generator, but a perpetual motion machine. But let's be realistic. Think about it, if a scientist managed to come up with such a device, would they sell it to the masses?
Hendershot Generator
Information about this device first appeared in America at the beginning of the twentieth century. But the generator became widely known during a congress dedicated to the study of the energy of the gravitational field, which was held in Toronto in 1981.
REFERENCE. There is an opinion that the physicist is not the author of the BTG. Nobody knows how and when Hendershot received the device or the schemes for its assembly.
The Hendershot generator works thanks to the earth's magnetic field, so its use causes some difficulties, because the generator must always be correctly located relative to the south and north poles of the planet.
Soon after the convention, Lester Hendershot was considered a fraud, and his device was declared a fake.
Generator by Tariel Kapanadze
Tariel Kapanadze is a Georgian inventor who, as many believe, has achieved the impossible. He invented BTG, and named it in his honor - capagen. The functionality of the device was demonstrated to the audience. But it is difficult to say whether this was a show or a demonstration of a real fuel-free generator, because Kapanadze keeps his technology secret, awaiting a rich sponsor for the further development of the project.
Despite the secrecy of the project, some sellers claim that they managed to obtain Kapanadze generator circuit diagrams, according to which they can assemble it themselves. But this is hard to believe.
Donald Smith Generator
Donald Smith is the most famous inventor of the fuelless generator. The design of the device is quite simple: a wave resonator is taken and oscillated using a spark generator. In addition, the circuit contains diodes, the function of which is completely unclear. But most importantly, where does the additional energy come from in the generator, and even in an amount of about 10 kW?
Donald Smith tried for a long time to explain the principle of operation of his invention, but they could not understand it. Many tried to replicate this device, but the power always turned out to be much less than that of the original.
Stephen Mark TPU Generator
The design of Steven Mark's device is very different from other BTGs, since the basis of the TPU generator is a metal ring with a diameter of 20 cm and coils of thick stranded wire placed on it.
REFERENCE. Stephen Mark was looking for an investor for his project for some time, but then suddenly disappeared. There is currently no information about the fate of the inventor or his device.
It is very difficult to assemble the TPU Mark generator yourself. The complexity of the design lies in the use of a multiphase master generator. In addition, neither the inventor himself nor his followers ever spoke about the principle of operation of the device.
Of course, you can try to verify the opposite and assemble the BTG yourself. But is it worth spending time and money on this?
Ecology of consumption. Science and technology: Fuel-free generators are gaining more and more popularity, thanks to the only, but very important advantage - the absence of fuel
Electricity generators are becoming increasingly popular every year not only among private users, but also in industry. This is directly related not only to savings in costs, but also to a reduction in the production of exhaustible minerals.
However, the most common fuel for them is still gasoline and diesel fuel. Their breakdown products are toxic and cause environmental pollution. Another thing is fuel-free generators, which have many advantages over their fuel counterparts. We'll find out what exactly they are next.
Saving mineral resources occupies a key place in the economy for many countries. This is successfully achieved through the use of fuel-free generators, whose operating principles are based on the elementary physical phenomena of magnetic induction current. Of the most successful and effective today, the following types of BG are used:
- Dudyshev rotor - uses a magnetic current that is converted into an electrical impulse.
- Minato magnetic motor has an increased efficiency of 100%, which is achieved through power amplifiers.
- Johnson motor - has a compensator, but is not effective in industry due to low power.
- The Adams generator is the most popular and efficient magnetic motor, which has a simple design but a high level of efficiency.
- Dudyshev solenoidal motor - has an external magnetic rotor, which is effective only when using low powers (with a “wet” design).
Let's take a closer look at Adams generators, which are most often found on the market of alternative sources of electricity.
Fuel-free generators operate on the principle of generating free energy, converting it into induction current. Such great physicists as Adams (after whom the device is named) and Bedini devoted their research to this physical phenomenon. These units are widely used as an autonomous power supply for private homes, as well as:
- in shipping;
- in the automotive industry;
- farm and forest land;
- in aircraft manufacturing and astronautics.
They are effective where there is no possibility of supplying fuel (diesel, gasoline, coke, gas, etc.), and natural energy (wind, solar energy, ebbs and flows) is not so powerful as to provide electricity at full capacity.
It is necessary to separate the concepts of “perpetual motion machine” and “energy generator of Adams memory”. They are similar in operation, but the latter require constant maintenance and periodic repairs.
Their operation does not depend on environmental factors, therefore the Vega fuel-free generator has the following features and advantages:
- Can be used away from any sources of electricity, as well as in open and closed areas, under the influence of precipitation.
- They use kinetic energy as fuel.
- They have no restrictions in operation and energy production.
- Does not have any negative effects on human health or the environment.
- The unit is quite compact and can be assembled independently if desired.
- Has a service life of at least 20 years.
The most important advantage of Vega generators is no need to impart constant movement to the generator shaft. This is done automatically by converting kinetic and electromagnetic energy into impulse.
The motor operates solely on the force of magnetic repulsion from the ends of the electromagnets. To do this, an induction field is created, which allows the production of an electrical impulse from magnetic oscillations.
The most primitive design of Adams generators contains the following elements:
- Generator - is a hermetically sealed cylindrical container, inside of which an electromagnetic field is created due to the influence of external coils.
- Voltage converter - generates electricity by converting magnetic pulses into alternating current.
- Rechargeable batteries – accumulate the received charge, allowing you to use it at any convenient time.
The main structural element is a gearless direct rotation generator, which is multi-pole in structure. Along its outer edge there are magnets, the number of which is selected individually, depending on the desired power. In the process of creating an electric field, the generator rotates around its axis, generating Efficiency no less than 91%. The generators are well connected to each other, which makes it possible to obtain autonomous power grids at absolutely no cost. This is beneficial in the case when the power of one generator does not exceed 5 kW, and at least 10 kW is required to fully provide electricity.
The operation of the generator under load is demonstrated in the video
Let's look at the example of creating an Adams-type generator, producing a small amount of power.
So, for work you will need:
- Magnets - their size will affect the induction field and the energy generated, so small pieces, preferably of the same size, are suitable for testing. For a full-fledged generator, 15 pieces will be enough.
The magnets must be installed towards each other with one pole - plus. Otherwise, the induction field will not be created.
- Copper wires.
- Two coils - you can either take it from ready-made motors or make it yourself by gradually winding two copper wires, starting from the bottom and moving up.
- Sheets of steel from which the body (frame) will be made.
- Nails, bolts and washers for securing small parts.
Let's get started. The first step is to attach the linear magnet to the base of the coil by drilling a hole and securing the latter with bolts. We wind wires (1.25 mm each) with insulation onto the coils. We install the coils on the metal frame so that there are gaps at the ends necessary for torsion of the main element. Actually, the unit is ready for use. Whether it was assembled correctly or not is very easy to check. To do this, you need to twist the magnets by hand, applying maximum force. If voltage appears at the ends of the winding (we check with a special device), then the unit is completely ready for operation.
Naturally, this circuit is primitive, but it reflects the essence of the idea - to create a generator that would operate without fuel, using the power of magnetic current. Such a generator is unlikely to be suitable for a home, but it will be quite possible to charge a mobile phone.
In the market of magnetic generator manufacturers, three leaders stand out significantly:
- "Vega";
- "Verano-Co";
- "U-Polemag";
- "Energystem".
"Vega"
The manufacturer produces generators that operate on the principle of magnetic induction, the idea of which was brought into reality by the scientist physicist Adams. The cost of certain models depends entirely on the power output and dimensions of the unit. The price starts from 45,000 rubles. Among the obvious advantages are the following indicators:
- high level of environmental friendliness;
- silent operation, allowing the generator to be installed in a residential area;
- compactness;
- wide range of models from 1.5 to 10 kW.
Duration of work – at least 20 years. Operation and repair depends on the model. The most frequently replaced parts are batteries, which last for 3-5 years of use.
The operation of the generator is shown in the video
"Verano-Co"
Ukrainian manufacturer that uses high-quality components for its models. It is based on the production of generators of alternative energy sources, intended not only for domestic needs, but also for generating energy on an industrial scale. The operating principle is similar to all magnetic generators. The price range for the model range varies from 50,000 to 180,000 rubles.
"U-Polemag"
Chinese manufacturer, leader in the number and variety of models. Efficiency – 93%, with less than 1% energy loss. Compact dimensions and light weight are ideal for home use. The low level of noise and vibration allows you to keep it in the house without fear for your health. The equipment includes modern cooling systems that allow you to increase the service life up to 15 years. It is distinguished by its affordable prices, which on average range from 31,000 to 85,000 rubles.
"Energistem"
Engaged in the production of fuel-free vertical generators that operate on magnetic current. Many users of such units are dissatisfied, expressing somewhat contradictory opinions regarding the quality and power of the generators produced. The slightly inflated cost of 50,000 rubles and above makes this company last in the ranking of BTG manufacturers.
Any new generators (and magnetic ones even more so) cost a lot of money, so before buying one the question arises: how to buy a cheaper, but high-quality model? Recently, it has been fashionable to buy goods from China, which are famous for their cheapness and relatively tolerable quality. Generators or components for them can also be ordered abroad, but the risks are high:
As you can see, the savings are completely false. Another option is to purchase from the manufacturer. But even here there are some problems. Without knowing all the intricacies of the design and operating features of the unit, an experienced salesperson and marketer can “sell in” a generator that will not meet the requirements. It’s not for nothing that they say that if you’re armed, you’re protected! Therefore, before buying an induction magnetic generator, you need to:
The video shows a Vega Adams generator
This question is quite difficult to answer, because as many people there are as many opinions. Remember the main thing - the main task of an induction vertical fuel-free generator is to provide electricity with the power that is required. If the power is not enough, the generator can act as an auxiliary source of electricity. When choosing a model, the savings will not be justified, since cheap units are created from cheap materials that will not serve faithfully for ten years, as they should.
A generator, just like a car, is something everyone chooses for themselves, taking into account their personal preferences and requirements. The model, power, dimensions and other technical characteristics completely depend on where, how, when and for how long the fuel-free generator will be used. published
